Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CM30E

Push-to-Exit Button Green

MOUNTSHAFT017

Manaras Clutch Shaft Kit for MTH MTBH (no pulley) Old Pre-1998

Input / clutch shaft kit for MTH MTBH
For old MTH MTBH with 1" diameter input shaft no pulley included

CGH105L5-RH

LiftMaster Gearhead with Brake and Carwash Mod 1 HP 575V 3P L5 Right Hand ***No Longer Available

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

210109

Skylink Pulley Assembly - Chain

.235-3.25-11.5-RHW

Mini Storage Spring .235 x 3.25" x 11.5" long Right Hand

Examples of ends on mini storage springs

PRO-GH-7521U-L

Micanan 3/4HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

218759

Torque Force Spring Failure Device 1-1/4" Shaft Right Hand Side

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

PRO-GH-7581U-L

Micanan 3/4HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5081U-L

Micanan 1/2HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-GH-5081U-R

Micanan 1/2HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

RADIO-RE900A

Manaras 1-Channel 24V Dip-Switch Receiver with Commercial Antenna 313 MHz *Replaced by RADIO-RE901A

For Commercial/Industrial Garage Door Applications
Wall Mount
Fixed Code / DIP Switch Technology
Sixteen (16) Fixed Codes / Receiver
313 MHz Radio Frequency
Controls One (1) Door

.......more details

PRO-HB-5038U-LH

Micanan 1/2HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5021U-LH

Micanan 1/2HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5021U-RH

Micanan 1/2HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5081U-LH

Micanan 1/2HP 208V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

MOTOR281

Manaras Electric Motor TEFC 1 HP 208/480V 3PH for N4/12 Applications

Electric motor only- not wired
Continuous duty base mount 56Z

PRO-H-7521-U-LH

Micanan 3/4HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5043-U-LH

Micanan 1/2HP 460V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5023-U-LH

Micanan 1/2HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

PRO-H-5021-U-LH

Micanan 1/2HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

PRO-H-5081-U-LH

Micanan 1/2HP 208V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL
On-Board receiver holds up to 20 transmitters

MK-00175

Micanan Transformer 200V-110V-100VA

MK-00223

Micanan Transformer 460V-110V-100VA

MK-00140

Micanan Reversing Relay 24VDC Coil DPDT (Flange Mount)

8-pin

MK-00056

Micanan Transformer 230V-115V-50VA

MV-00214

Micanan Tele 8" Wand (For Utility Switch)

MK-00025

Micanan Double Limit Switch Cherry DAT

MV-00029

Micanan 110V Commercial Receiver NEMA-4 CR32E-110V

MK-00235

Micanan Flasher 120V

In closing cycle door will stop for 1.5 seconds and reverse to fully open

MV-00016

Micanan Key Switch O/C Tamper Proof Nema 1 Flush Mount

.437-334-R

Cut-to-Length Torsion Spring .437 x 3-3/4" Right Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.406-334-L

Cut-to-Length Torsion Spring .406 x 3-3/4" Left Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.363-514-R

Cut-to-Length Torsion Spring .362 x 5-1/4" Right Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

.312-514-L

Cut-to-Length Torsion Spring .312 x 5-1/4" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.283-6-R

Cut-to-Length Torsion Spring .283 x 6" Right Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

PRO-LJ-5021-U-LH

Micanan 1/2HP 230V 1P Jackshaft N1 Eyes Monitored ECB Left Hand

On-Board receiver holds up to 20 transmitters

PRO-LJ-5011-U-RH

Micanan 1/2HP 115V 1P Jackshaft N1 Eyes Monitored ECB Right Hand

On-Board receiver holds up to 20 transmitters

PRO-LJ-5011-U

Micanan 1/2HP 115V 1P Jackshaft N1 Eyes Monitored ECB Universal Mount

On-Board receiver holds up to 20 transmitters

.393-334-R

Cut-to-Length Torsion Spring .393 x 3-3/4" Right Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.319-258-L

Cut-to-Length Torsion Spring .319 x 2-5/8" Left Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-258-Installed

.273-258-L

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

PRO-APT-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-TB-10011-U

Micanan 1 HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-TB-7581-U

Micanan 3/4HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-TB-5081-U

Micanan 1/2HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-7543-U

Micanan 3/4HP 460V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-5083-U

Micanan 1/2HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-5081-U

Micanan 1/2HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

MM00022

Micanan Support U-Bracket H/HHD MSI0015

Fits PRO-H/HHD

TVB624-11SF

Steel-Faced Laminated Bumper Black 6 3/4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TB612-18SF

Steel Faced Laminated Bumper Black 12" x 18" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-12

Laminated Bumper Standard Black 12" x 12" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-24

Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-36

Laminated Bumper Standard Black 10" x 36" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

2376.182.29.870

Whiting Torsion assembly .182 wire size 29" spring length 87" shaft

This is a full balancer assembly
Twin springs one road one curb with a shaft through it

RP-TRF-110-2415VA

Lynx Transformer 110/24 15VA *** No Longer Available

For old 455 Automatic Doorman opener

41A4208-2

LiftMaster Chain Spreader Kit

Chain Spreader Replacement Kit.
For use with various LiftMaster® and Chamberlain® Chain drive garage door opener models.
Complete kit includes: Chain spreader replacement screws and washers.
Also known as: 41A4208 41A4208-2 062210

ME00037

Micanan Clutch Shaft Only for PRO-LH

37561S.S

Genie Belt and Bullet Assembly 8ft

For use on 8 ft doors
Compatible with the following:
SilentMax 1200 (Model 4042) 1000 (Model 3042) 750 (Model 3055) 550 (Model 2055)
ReliaG 650 (Model 1028) 850 (Model 2028)
IntelliG 1000 (Model 3024)

MP-00002-460V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

Controlling action of two lights- sockets supplied on cover

MM00024

Micanan Cam Plate for PRO-HHD

9004-08

Excalibur Threshold Kit 8'2" x 4" W Solid Aluminum ** Price by Quote Only

Stands 1/2" tall
Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
Two-way fastening/seal system won’t shift buckle or leak
Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
The 1/2" diameter wire access port makes it easy for sensor and security installations.
The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.

.......more details

MD-00516

Micanan Roller Chain #40 Waterproof 10' Pack

7001-9-BRONZE

Commercial Side & Top Weather-Strip 9' Long - Bronze (BZ)

Bronze galvanized steel with bronze dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

2806.148.140

Whiting .148 x 2-3/16 x 14" Roadside with Cones

RW-PANEL

Richards Wilcox Replacement Door Panel Special Order

As per customer's requirements

109435.0001

Overhead Limit Switch

PRO-HBH-7583U-R

Micanan 3/4HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

CA-104-412

Continuous Angle 1-1/2" x 4-1/2" x 104" L Sold per Piece

38C

Skylink 1-Button Universal Remote ***NLA

Easy to carry or clip on sun visor.
Operating range of 100 feet and more.
12V alkaline battery included.

NUT013

Manaras Jam Nut

WINDOW-SP.ORDR

Special Order Window

Made to customers specific requirements

1116633121.S

Overhead 1-btn Transmitter 312 MHz ** No Longer Available

Replaces the 1091303121.S
1 channel transmitter opens and closes 1 door
Codes using 9 dip switches with 3 positions
Battery (ALK12V) and visor clip included
Compatible with all Overhead Door 312 MHz frequency garage door openers that were manufactured before 1996.

PRO-H-5053U-RH

Micanan 1/2HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

PRO-H-7511E-LH

Micanan 3/4HP 115V 1P Hoist Operator NM ECB No Eyes Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

Installation manual Specification sheet

PRO-TB-7511-E

Micanan 3/4HP 115V 1P Trolley Operator with Brake NM ECB No Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Non-Monitored board NO photoeyes

SPRING-DUPLEX

Special Order Duplex Spring Assembly

Customer made to required size

1104-9FT-GREEN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Green (R)

Green rigid vinyl retainer with green flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

39913625

Hitch Pin Forged Wire Handle 3/4" x 6-1/4" Red

Usable length is measured between the shoulder and the cotter pin

CP-CONT-SCHNEIR

Contactor Schneider 24V

Works on Lynx MCJH
Same as LC2 K12107B7 & MK00108
replace Riken Contactor

.331-514-L

Cut-to-Length Torsion Spring .331 x 5-1/4" Left Hand Wound Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-514-INSTALLED
For spring filler use part no. SPRING-FILLER

.331-514-R

Cut-to-Length Torsion Spring .331 x 5-1/4" Right Hand Wound Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-514-INSTALLED
For spring filler use part no. SPRING-FILLER

41A7920-2

LiftMaster Hardware Kit

2806.156.195

Whiting .156 x 2-3/16 x 19.5" Roadside with Cones

C-514-INSTALLED

Cones 5-1/4" Factory Installed (Pair)

For do-it-yourself installation use part no. SF514U

.343-514-R

Cut-to-Length Torsion Spring .343 x 5-1/4" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

1104-7FT-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 7' Long - Light Bronze (F). ***NLA

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

SA-TORSION-ASSY

Complete Torsion Assembly Special Order

Special order

PRO-H-7511U-RH

Micanan 3/4HP 115V 1P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

Installation manual Specification sheet

VFD-MOD

Micanan Variable Speed Modification Up-Charge for VFD Operators

Variable Frequency Drive modification for commercial operators
Whenever the primary power is 575V must add MX00164 panel

CS303-FP-100

EMX Car Sense Direct Burial Sensor Flat Pack 100ft *** Replaced by LRS-FP-100

Lead probe ONLY. Requires the CS303-C-1 detector.
Easy installation above or below ground
Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Sensitivity display
Single cut installation with flat pack model

EH5761-A19

Automatic Systems Round Arm Assembly BL27 14'-9 (4.5M)

French description: Ensemble Lisse Ronde 4.5m (14'-9")
For model BL27 gate operator

.437-6-L

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

BRACKET003

Manaras Disconnect Lever Bracket MJ

MGS20-Y-2U-05

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

PRO-HBH-7523U-L

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details