Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MK-00100

Micanan Transformer 575V-110V-100VA

MK-00056

Micanan Transformer 230V-115V-50VA

MV-00027

Micanan 110V Commercial Receiver CR32-110V

A transformer 110/24V (MK00030) is supplied separately for the 110V version

MK-00300

Micanan Time Delay on Reverse 0.5 sec. 24/110V

In closing cycle door will stop for 0.5 seconds and reverse to fully open

MV-00273

Micanan Key Switch O/C/S Btn Single Gang Stainless Steel Plate Flush Mount

MV-00239

Micanan Key Switch O/C/S Btn Tamper Proof w/Best Core Cylinder Nema 1 Flush Mount

ME110-2W-BLK-R

Miller Edge 2-Wire Black Right Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical slide in edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling that allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet

PRO-J-10083-U-LH

Micanan 1HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

.421-6-R

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.421-6-L

Cut-to-Length Torsion Spring .421 x 6" Left Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.406-514-L

Cut-to-Length Torsion Spring .406 x 5-1/4" Left Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.343-258-L

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.343-258-R

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.306-514-R

Cut-to-Length Torsion Spring .306 x 5-1/4" Right Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.306-2-R

Cut-to-Length Torsion Spring .306 x 2" Right Hand Wound Red

Priced per inch
For factory installed cones priced seperately - use part no. C-200-INSTALLED

.283-6-L

Cut-to-Length Torsion Spring .283 x 6" Left Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

31128

Doorlec Sprocket 41B12 Plain Bore 1"

Plain bore (no keyway)

PRO-J-5053-U-RH

Micanan 1/2HP 575V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-5021-U-RH

Micanan 1/2HP 230V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-GT-15011-U

Micanan 1-1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-7553-U

Micanan 3/4HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10081-U

Micanan 1HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7583-U

Micanan 3/4HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-5053-U

Micanan 1/2HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

.319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-258-Installed

PRO-APTB-7543-U

Micanan 3/4HP 460V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

PRO-APTB-7583-U

Micanan 3/4HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

PRO-APTB-7521-U

Micanan 3/4HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

.375-514-R

Cut-to-Length Torsion Spring .375 x 5 1/4" Right Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

PRO-APT-7581-U

Micanan 3/4HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board

PRO-TB-10021-U

Micanan 1 HP 230V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-7553-U

Micanan 3/4HP 575V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7523-U

Micanan 3/4HP 230V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7521-U

Micanan 3/4HP 230V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-5038-U

Micanan 1/2HP 380V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

60-7248-SC8

Wheel Chock Safety Pkg incl'd: alum. chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) SC-8 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
"Claw" Like Bottom Assures Dependable Grip on Any Surface
Chock Fits Snug Under Tire Contour for Maximum Holding Power
Often Preferred For Snow and Ice Conditions
Light Weight and Reliable
Size: 7" wide x 11-1/2" long x 8" high

.......more details

60-7248-888XL

Wheel Chock Safety Pkg incl'd: laminated chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) 88-8XL Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Made From Used Truck Tire Laminates Compressed and Fastened Under High Pressure
Galvanized Steel Sides
Size: 11-1/4" wide x 14" long x 14" high

60-7248-CMH94

Wheel Chock Safety Pkg incl'd: chock with integral handle wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CMH-94 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
One Piece Solid Rubber
Integral Handle
Long Lasting 80 Durometer rubber
Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high

60-7248-CBI29

Wheel Chock Safety Pkg incl'd: cast ductile iron wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CBI-29 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Made from Cast Ductile Iron for Impressive Strength
Painted Blue for good Visibility
Completely Reversible for Simple Use
Size: 8" wide x 12" long x 9" high

CMH-94

Wheel Chock CMH-94 Rubber with Integral Handle

One Piece Solid Rubber
Integral Handle
Long Lasting 80 Durometer rubber
Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high

60-7248-CC07

Wheel Chock Safety Pkg incl'd: cast alum. alloy chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CC-07 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Reversible Chock Design
One-Piece Cast Construction
Cast Aluminum Alloy
Size: 10" Base x 9" high x 6-1/4" wide

MK-00071

Micanan Transformer 575V-115V-50VA (MK00161)

LR110LTB3815

Telco Thru Beam Receiver M12

Remote receiver Series 110
M12 x 1 Housing Size
Nickel Plated Brass Housing Material
15 m Cable Cable Connection
IP 67 Sealing Class

LT100HLTB3815

Telco Thru Beam Transmitter with LED M12 Hi-Power 15M Cable

Sensor Light Transmitter with LED
M12 High Power 15M Cable

2200-926

Linear Gear Reducer 60:1 Models SWR SWD

MD-00247

Double Sprocket 41B14 / 41A32 with 3/4" Bushing

Double sprocket for clutch shaft on PRO-H/HB
includes 3/4" ID brass bushing

MO00019

Micanan Extension Spring for PRO-J

MF00009

Micanan Hex Head Bolt 1/4" - 20 UNC x 2-1/4" Partial Thread

Used on PRO-HHD
1 required per operator

31D380

LiftMaster Sprocket Cover

Sprocket Cover Replacement Kit for use with various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers

HRB-12

High Riser Bracket for 7" Above Dock or Higher 12"

High Riser 12" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

SRB-4

Standard Riser Bracket for 6" Above Dock or Less 4"

Standard 4" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

Specification Sheet

ME123-C7

Miller Edge Flat 3-1/2" Wide PVC Mounting Channel Sold by the Foot

BB

Molded Rubber Bumper Black 24" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
24" L x 10" W 4" Projection

.......more details

STRUT-2-1/4-14'-NH

Door Strut 2-1/4" Non Hemmed 14 ft Long ***No Longer Available

Reinforcement bar 2-1/4"
20G

LB1212-18

Laminated Bumper Standard Black 12" L x 18" W 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1210-14

Laminated Bumper Standard Black 10" x 14" 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

STATION080

Manaras 3-btn Push-Button Control Station with Key Lock-Out and Pilot Light Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.
Schneider Elect. part no. XALD04H7

LB1010-14

Laminated Bumper Standard Black 10" x 14" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LLB420-22SF

Steel Faced Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.

.......more details

STRUT-2-1/4-12'-NH

Door Strut 2-1/4" Non Hemmed 12 ft Long

Reinforcement bar 2-1/4"

TB612-36SF

Steel Faced Laminated Bumper Black 12" x 36" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LLB620-22SF

Steel Faced Laminated Bumper Black 6" Projection L-Shaped 20" x 22" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.

.......more details

LVB624-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB636-11

Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB436-11

Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

.207-3-9-LHW

Mini Storage Spring .207 x 3" x 9" long Left Hand

MK-00694

Micanan 10K OHM Resistor *** DISC Repl by MK00713

PRO-GHCB-20053

Micanan 2 HP 575V 3P Gearhead Operator with Brake No Controls

Installation manual Specification sheet

CB380250

Cable 3/8" 6x36 IWRC 250' Galvanized Wire Rope

This rope is most commonly used on small overhead cranes and pulley systems.
Provides strength and flexibility but not a lot of wear resistance.
Cable break strength: 13600 lbs

02-404

LiftMaster Key Switch Assembly On/Off Nema 4/12 **DISCONTINUED

Two Position Key Control Station
Outdoor Surface Mt. (NEMA 4/12)
Non-Tamperproof
OPEN/CLOSE spring return to center (OFF) key removable in center position only.
Should only be used on operators wired for constant pressure to open and close (all LiftMaster industrial operators with type D control wiring).
Die cast metal enclosure

.......more details

HAE00057

Linear LDCO Motor with Encoder

For LDCO800 operators manufactured before 04/2011 compatible replacement part number HAE00053 for motor with encoder and HAE00054 for encoder board.

MM00149

Micanan GHC Frame Support U-Bracket MSI0161 (for 2 3HP)

MG00013

Micanan Ribbed Hex Nut 3/8" - 16 UNC

PRO-GHC operator parts
8 required per operator

MH00004

Micanan Flange Bearing UCFL207-22 1-3/8" Bore

Used on PRO-GHC (BHC-80) for 2 3 5HP
2 required per motor

PRO-X_MOD-2HP

Micanan Explosion-Proof Modification N-7/N-9 for 1.5HP-2HP

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

PRO-X_MOD-1/575V

Micanan Explosion-Proof Modification N-7/N-9 for 1HP 575V

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

MX-00016

Micanan TEFC Motor Upgrade Modification

TEFC motor upgrade for 1-phase belt drive operators

CP-NCAM

Lynx Limit Cam 5/8-24 Travelling

Limit cam / limit nut

ME00037

Micanan Clutch Shaft Only for PRO-LH

VWS-34-CHRY-OAK

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Cherry Oak

Pan head

HSLG-221

Linear Commercial Slide Gate Operator 1/2 HP 230V 1 Ph - Heater not Included

Max gate size: 35 ft 1000 lbs
Max duty cycle: Continuous
Integral APeX Controller
Double V-belt to chain reduction
#40 roller chain
Emergency manual disconnect handle

.......more details

41C5548

LiftMaster Wiring Harness Kit Low Voltage

For use with various LiftMaster® and Chamberlain® Garage Door Openers

8280.96

Whiting Aluminum U-Channel 96-5/8 IN Dry Freight

An original Whiting product
Use with Whiting seal # 5735.96

.207-3-8.25-RHW

Mini Storage Spring .207 x 3" x 8.25" long Right Hand

CB-1.115

Whiting Stainless Steel Cable 115" L with Black Grommet 5/16" Eye 1 Cable

7x7 stainless cable
Sold per cable

50420

Push Button Station 3-Btn with Pilot Light and Key Switch Off/On Nema 1

Surface Mount
General purpose EEMAC 1

MB-02004

Micanan Electric Motor Only 3/4 HP 110/220V 1PH C-Flange TEFC 56C

C-Flange TEFC electric motor
Fits models: GT GH GHC & GSD

RB741

Linear / GTO 1-Button Transmitter 318 Mhz

Standard transmitter included with all GTO gate operators
Much smaller in size than previous model and improved signal range
The single button controls the gate operator and has adjustable code settings and has (new miniature) visor clip for your vehicle and now a whole for key-ring or key chain.
It is compatible with GTO and Mighty Mule gate operators
The code settings are the 9 dipswitches located inside the cover.
Measures: 2-1/2 H x 1-1/2 W x 9/16 D.

.......more details

MGH-6214-CONT-LH

Manaras 1 HP 240V 1P Jackshaft Contactor Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

MC00007

Micanan Gear Reducer BHC 80 40:1 143TC (2 HP)

MK00542

Micanan Emerson Motor Capacitor 1/2HP 110V 324-389uf with Resistor *** No Longer Available

For 1/2 Hp 110V operators

MU33-2WIRE-RH-Y

Miller Edge MU33 2-Wire NM Right Hand Yellow - Sold per Foot

MU style bumpers are designed for use with aircraft hanger doors and large specialty doors.
Must specify the exact length in feet and inches when ordering.
Mounts vertically or horizontally
Sensitivity: nominal 8-13 ibf

Worksheet

BCH101L5R-BZ

LiftMaster 1 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. RH ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

PRO-HBH10021U-R

Micanan 1 HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

1 HP230V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

MT21-BLACK-RH

Miller Edge 2-Wire Pressure Sensitive Edge Black Right Hand Outlet Sold per Foot

��Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty