Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Miller Edge
MOD021A

Manaras Safepack 24V Control Circuit

  • A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.
MX00140-110-OLD

Micanan Brake Assembly for PRO-TB/APTB with 110V Solenoid Inside - Old Model

02-711

LiftMaster Nema 7/9 Ceiling Switch Pull Control

  • Single Pull Switch Control
  • Hazardous Area Overhead Mt. (NEMA 7/9)
  • Die cast hazardous area enclosure
  • May be used in two different ways; as an OPEN only control (all LiftMaster operators) or as an OPEN/CLOSE control (only LiftMaster operators with types B2 and S2 control wiring). In the latter case pulling the cord will open a fully closed door close a fully opened door and reverse a closing door.
  • Pulling the cord whlie the door is opening will either have no effect (type B2 wiring) or will stop the door (Solid State Logic Control Board).
  • WARNING: When used on most industrial operators this control will not stop the door. Use another control that has a STOP button in conjunction with this control.
    • .......more details
SCRUBS-PAIL

Scrubs Hand Cleaning Towels 72 Towels per Pail*** Special Order Sold by Quote Only

  • The citrus-based formula and textured towel combination works to loosen dissolve and absorb the toughest materials
  • Each pail contains 72 towles
  • 6 pails per case
PRO-HB-7511R-LH

Micanan 3/4HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Left Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Includes solenoid brake
  • On-Board receiver holds up to 20 transmitters
Installation manualSpecification sheet
.343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Blue/Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
771

Fasteners Lag Screw Hex Washer High Profile 5/16" x 1-3/4" 1000/Box *** Discontinued

  • 7/16" head
763

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/4" 1000/Box

  • Full length thread
  • Max torque = 6
790

Fasteners Hex Nut 3/8-16 1000/Box

23-2016

LiftMaster Limit Switch

  • Limit Switch for the VSL595
MV00292

Micanan Banner Photocell with Reflector

SSZP12-6

Solid Shaft 1" Keyed Zinc Plated 12'-6"

71B240G

LiftMaster Brake Kit 230/240V with Solenoid Field Install SL585 and SL595

Instruction Manual
41AC175-2

LiftMaster Electronic Circuit Board Assembly

  • For Sears / Craftsman garage door opener
3X6PO50

Devanco Loop 3' x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or surfaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
94-61180-33-84

Truck Door 2" Steel Roller 6" Stem for Whiting Roll-Up Doors

  • open-bearing roller
1104-10FT-GREY

Residential Side & Top PVC Weather-Strip with cap 10' Long - Grey (G)

  • Grey rigid vinyl retainer with grey flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
EL25S

LiftMaster Telephone Entry System Silver

  • Capable of accepting up to 2000 codes
  • 4 assignable and programmable built-in relays
  • Mounting versatility and available in 3 colors: Gray Nickel or Silver
Installation ManualSell Sheet
M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

  • Same as part # 65893 and 97244
  • Visor mount
  • Includes battery CR2032
  • Made in Germany
Instructions
10-30702

LiftMaster Chain Guard Top Cover Mfg Painted (K10-30702-2)

029-98290

W-Style Replacement Door White Stainless Steel Package 029-98290

  • Replacement door size between 96-1/4" - 98" wide x 72-90" high
  • Painted white
  • Stainless steel package
BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

  • For use with 2" rollers
  • Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
  • 13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
  • Same as part number 263
TUBE_SHAFT_18FT

Hollow Shaft 1" x 18'-10" Galvanized 14 gauge

.218-258-L

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.207-2-L

Cut-to-Length Torsion Spring .207 x 2" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.250-134-R

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
MX00034-110V

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

  • Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011
107999.0001.S

Genie Motor Pulley for Overhead JST

77810.0001

Overhead Door Box Assembly Cushion (#111389.0001.S) ** Price by quote only

  • Garage door operator bracket for older Overhead Door residential models (Automate 70 Touch n Go R-80 100 100SS 1000) and commercial garage door openers.
.375_5-1/4"-LH

Torsion Spring .375 x 5-1/4" x 12ft LH Yellow/Green

  • Wire size: .375
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.406_3-3/4"-LH

Torsion Spring .406 x 3-3/4" x 12ft LH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 3-3/4"
  • Length: 12 ft
374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

  • Compatible with wireless keypad model number 377LMC
  • Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
  • This transmitter is replaced by 894LT
24-24-1

LiftMaster Relay 24VAC 8-Pin DPDT Flange

4A1344

LiftMaster Light Socket Plastic (41C279)

T-733

FL-Allstar 3-btn 3-Door O/C/S Transmitter 107477-311 MHz

  • This transmitter can control (open-close-stop) up to three doors.
  • It has a eight switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 733T (190-107477)
  • Dimensions: 6 1/4" x 3 3/8" x 1 3/8".
Programming Instructions
T-833

FL-Allstar 3-btn 3-Door Transmitter 108817-311 MHz

  • This three channel transmitter controls up to three doors (open-close) or one door (open-close-stop).
  • It has a height switches encoder with three positions: + 0 and - .
  • Manufacturer's model number: 8833T (190-108817)
  • Dimensions: 4 5/8" x 2 1/4" x 7/8"
Programming Instructions
CAM011

Manaras Limit Cam

  • Limit cam for Mountshaft018A 018B
  • 2 cam's required per shaft
144C54

LiftMaster Idler Belt Pulley

  • Wide idler belt drive pulley
  • For square rail assemblies
.306_6"-RH

Torsion Spring .306 x 6" x 12ft RH Red

  • Wire size: .306
  • Inside diameter: 6"
  • Length: 12 ft
.393_3-3/4"-RH

Torsion Spring .393 x 3-3/4" x 12ft RH Orange

  • Wire size: .393
  • Inside diameter: 3-3/4"
  • Length: 12 ft
.331_3-3/4"-RH

Torsion Spring .331 x 3-3/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 3-3/4"
  • Length: 12 ft
41A5281

LiftMaster Extension Brackets for Snappy Sensors

  • Brackets used with Snappy Sensors 41A5034
  • For use with with 41A5266-1
H14G05

Hinge #5 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #5 position
  • Use between sections 5 and 6
  • Same as part number 245
    • .......more details
SESMT03

Erone Wall Support for Transmitter

  • Wall support for one S2TR2641 transmitter
  • Color: Grey
  • Velcro and mounting hardware included
Wireless System Chart
OPH-6532-ECB

Manaras Opera-H 1/2HP 600V 3Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
Installation ManualSell Sheet
RADIO-16

Manaras MT2-1000 2-btn transmitter 313 MHz****Replaced by RADIO-EM903

  • Open/Close remote for 2 doors
  • Comes with LED battery life indicator
  • 9V battery included
  • Sunvisor clip included
Programming Instructions
7470.115

Whiting Side Seal for insulated doors 115" Long

  • Fits Coldsaver and Tempguard
HAE00014

Linear Pulley and Bracket - Chain (HCT)

HAE00023

Linear 7ft Belt & Inner Slide Assembly (HBT7)

1336.6

Whiting Stainless Steel Roadside Top Closure Bracket for 10" radius

4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

  • For angle application (180 degree)
  • For use with Light Brush or Vinyl Insert
1004-134-24'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 24 ft***Actual Length 24'4"****

  • For door thickness 1-3/4"
  • DIE # ES19244
1003-1-3/8-12'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
9001-24FT

Commercial Side & Top PVC Weather-Strip Clip-On 24' Long

  • Grey rigid vinyl retianer with black flexible vinyl.
  • Reverse angle clip-on vinyl retainer.
  • Clips onto side of rolling steel door.
  • Clips overtop of 1/4" angle.
1104-16FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 16' Long - Cream (C)

  • Cream rigid vinyl retainer with cream flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Almond
7001-9-WHITE

Commercial Side & Top Weather-Strip 9' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
27-20401

Truck Door Bracket for Torsion Assembly Curbside (RH) for Todco Roll-Up Doors

  • Steel construction
  • Zinc plated finish
  • Cross Reference: T #51036-1 W #4029 360100
27-20126

Truck Door Spring Spacer 33" long for Whiting Roll-Up Doors

  • Extruded PVC construction with zinc plated thrust washer.
  • Cross Reference: 2471
26-94323

Truck Door Bottom Panel with Seal (13" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
26-94321

Truck Door Bottom Panel with Seal (11" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
H11G11

Hinge #11 x 11 gauge

  • 11 gauge # 11 hinge - 0.93 lbs
  • Bright zinc-plated steel construction
  • For use with 7/16" stem rollers
CBC532

Thimble 5/32" - 100 per pkg

25-10311

Truck Door Heavy-Duty Lift Handle Zinc

  • Heavy-duty wide grip design
  • Zinc plated finish
  • Cross Reference: T #61401 W #1715 250000
25-10300

Truck Door Cable Anchor Bracket Zinc

  • Steel construction Zinc plated finish
  • Allows proper rotation of cable head
  • Cross Reference: T #61204 W #4004 240000
CUSTOM4X8PO

Devanco Loop 4'x8' rigid-pvc pave-over

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
Installation InstructionsInstructions d'installationSpec SheetBrochureLoop Placement GuideGuide de positionnement des boucles
4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
STRUT-2-1/4-9'

Door Strut 2-1/4" Hemmed 9 ft Long

  • Reinforcement bar 2-1/4"
  • Electro-Galvanized
  • 22-GA
MP00054

Micanan Track and #410 (#48) Chain for 8' h Door *Actual length 126"*

  • For 1/3 & 1/2 HP Micanan trolley operators
TAC1

LiftMaster Single Line Telephone Access Control with Radio

  • The TAC1 can be connected to two devices such as a door or gate using the two independently controlled relays or wirelessly using Security+ technology standard or any combination of the two.
  • Provides wired communication and secure access control at the gate or door.
  • Measurements: 6" h x 8.75" w
Installation ManualProgramming Instructions
MD00086

Micanan Sprocket 40B18 x 1" 1/4" Keyway

26-14323

Truck Door Bottom Panel with Seal (13" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
  • Comes only with bottom retainer and seal (installed)
LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding†heavy-duty steel face is 3/8†thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4†rods
  • Bumper is fastened to dock surface with 3/8†steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8†diameter.
    • .......more details
.343-3-3/4-LH-C

Torsion Spring .343 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 3-3/4" Length: 12 ft
MT22-YELLOW-RH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot

  • €¢Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
Installation ManualWorksheetSell Sheet
.225-258-R-C

Cut-to-Length Torsion Spring .225 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
ME123-M-BLK-LH

Miller Edge Black LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
7001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
32-48-120

Extension Spring 8' Door - 120 lbs Green *** Replaced by 27-48-120

  • Double - Loop
  • 32" long 48" stretch 120 lb load
  • Springs sold individually
Spec Sheet
1104-12FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 12' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
19-5814-NP

LiftMaster Trolley Chain Pack #48 for 14ft Door Nickel Plated

  • Chain pack only
1003-2-8'

Aluminum Bottom Retainer L-Shaped 8' Long

  • For 2" thick doors.
50307

Doorlec Cam Shaft Sub-Assembly EHJ ETH ETBH LJH

  • For models; EHJ ETBH and ETH
  • Assembly includes: Cam shaft (26140) Oilite (11801) x 2 Sprocket 41B12-5/8" (31118) Flange Bearing (28002) x 2 and nuts.
30B363

Capacitor Motor Start 53 uF - 64 uF 220V *** No Longer Available

41B4103

LiftMaster Service Belt Tensioner

1104-16FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
SLT-TT

Rolling Steel Thermotite Slat Foam Injected

029C98200-PRIMR

W-Style Complete Repl. Door Primer only

  • Primer only no stainless steel package.
  • For doors upto 98" wide x 100" h
  • Fully assembled door manufactured to exact size with all tracking and spring operator assembly
  • Price varies according to size
765

Fasteners Serrated Flange Nut 3/8-16 1000/Box

  • Serrated flange face to provide locking
URBAN-MR-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Narrow multi rib pattern - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
27119

Doorlec Electric Motor TEFC 3/4HP 208/480/575V DC423

  • Frame size is 56
MSJ-6534-M-N1-RH

Manaras MSJ 1 HP 600V 3Ph Monitored Board w/N1 Eyes RH

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 35 cycles per day > 150 cycles per day
    • .......more details
19-10929

LiftMaster Hoist Chain Sold by the Foot

  • and Chain for LiftMaster commercial hoist operators
MG00013

Micanan Ribbed Hex Nut 3/8" - 16 UNC

  • PRO-GHC operator parts
  • 8 required per operator
M7A

Safety Inertia Brake 1-1/2" Bore 6266 Torque

  • Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
  • Ideal for commercial and industrial use; specifically with rolling shutters and rolling doors.
  • Normal Torque: 6266 lbf.in
  • Locking Torque: 29199 lbf.in
Reference manualTechnical dataSell sheet
2300L

LiftMaster Builder Series Chain Drive DC Motor Wi-Fi Battery Backup

EIM-101

Miller Edge Electronic Interface Module w/Junction Box (JB-02P-W)

  • Designed for use with pre-UL325-2010 commercial door operators and Miller Edge CPT sensing edges.
  • It's a durable weather-resistant solution housed in a NEMA 4-rated junction box.
  • This module is particularly suited for overhead doors using retracting reels or coil cords
31120-112-3/8

Doorlec Sprocket 50B36 1-1/2" Bore 3/8" KW

  • 36 tooth sprocket
841LM-NOBOX

LiftMaster Automatic Garage Door Lock No Box Connector with 3 pins

  • Automatic operation performs in tandem with the opener so it always locks and unlocks.
  • Anywhere assurance smartphone monitoring with the MyQ® App means homeowners always know that the garage is secure
  • Absolute protection the automatic deadbolt lock makes the garage door virtually impenetrable
  • Comes included with 8500W
  • Works on models 8550WLB 8360W 8587W & WLED
  • same as Part # 001D8875
    • .......more details