Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Miller Edge
ST-GLUE

Soft Touch Glue

  • For use with Soft Touch Profile
  • 1 oz
CP-BRG-1

Lynx Bearing 1" *** Replaced by HW-BRG-1

  • 2 in total on a MCJH
ME111-L

Miller Edge Black Left Hand Outlet 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
    • .......more details
Installation ManualWorksheetSell Sheet
R5205

Saddle Support for 4" Pulley

  • 8 gauge galvanized steel
25-60503

Truck Door T-Style Ramp Handles Curbside (Right)

  • Black plastic construction
  • Cross ref.: 39504-2
CLUTCH-ASY-MCJH

Lynx Complete Clutch Shaft Assembly for MCJH Operators 5/8" x 12-1/2"

1104-7'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Dark Sandstone (DDG)

  • Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
MAREDLED17

LiftMaster Red LED Light Stip 13ft Long

  • Provides LED visibility on both sides to 17 ft. arm.
26966A

Genie Idler Pulley for Stealth Chain Drive

  • Fits Genie Stealth model
  • 1/4” bore
  • Channel style rails
MDT-4B

Linear 5-Channel Visor Transmitter MegaCode Block Coded 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
  • Sold in lots of 10
    • .......more details
Programming instructions
26966D

Genie Chain Pulley

  • Front idler pulley for full chain models ie..PMX500
  • Fits a T-rail
  • Diameter: 2-3/8"
  • 7/16” bore
  • For use with t-style rails
79-16088

LiftMaster Circuit Board Assembly for LGO **discontinued**

  • Same as K79-16088
PBS3-RED

Replacement Button Only - Red

  • Replacement button for 02-403P
10-11021

LiftMaster Disconnect Lever GH

11-10705

LiftMaster Output Shaft MH

OSH-6233-CONT-R

Manaras Opera-SH 3/4 HP 208V 3 Ph Contactor Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual Sell Sheet
BCSI-HV-100-21

Industrial Slide Gate Operator Variable Speed 1 HP 240V 1 Ph with Heater ** Price by Quote Only

  • Heavy-duty alminum cabinet Nema 3R
  • Programmable logic controller
  • Adjustable friction clutch
  • Thermostat controlled heater
  • Opening / Closing speed of 24" / sec
  • Nema 4 control panel
    • .......more details
Installation manualSell sheetBrochureInstallation overviewDessin de installationDiagnostics and troubleshootingDiagnostics et dépannage
OPH-6232-CONT-L

Manaras Opera-H 1/2HP 208V 3Ph Contactor Left Hand

Installation ManualSell Sheet
AC22KITB

Erone Web-Based IP 2-Door Controller Kit *** NLA

  • Can manage up to 10 doors (2 on-board and 8 using four 2-door expansion modules AX22)
  • Reader Inputs: 2
  • On-board Embedded Web Server (AES encryption)
  • Pre-assembled universal power supply (120V / 240V)
  • Quick and easy card enrollment procedure
  • Auto-detect hardware modules
    • .......more details
Installation manualAtrium software user guideSell SheetWireless System Chart
MM00011

Micanan Brake Solenoid Cover

RESET012

Manaras Resettable Overload Fuse 15A 1 Phase

PEDALU4272

Aluminum Pedestal Post Dual Height 42" & 72"

  • Pedestal post with hood
  • High quality aluminum
  • 42" & 72"
  • Dual face-plate allows for easy wire connections
Shop drawing
7001-WG-7-CO

Residential Wood Grain Side & Top W/S Cherry Oak 7' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
MA028

LiftMaster Padded Barrier Arm Yellow 14ft

  • For use on Mega-Arm gate operator
  • Requires adapter collars model MA031 - sold separately
Additional arm accessories
39-16759

LiftMaster Clutch Pad for EGJ ***NLA NO SUB

MK-00061

Micanan Time Delay on Reverse 1.5 sec. 24/110V

  • In closing cycle door will stop for 1.5 seconds and reverse to fully open
3BLM-BC

Exterior Control Station 3 Button N4 with Mortise Lockout in Metal Enclose and Best Cylinder

  • Open-Close-Stop
  • Dimensions: 7" h x 2-3/4" w x 3-1/2" d
  • Exterior surface mount
3BLM-BC
BP-BE102BP

Contact Block Base Mount NC Contact

  • For use with RC P enclosures. IP65
TC134-16

Top Cap 1-3/4" 16 ft Black Box Qty Only ** To extent of Inventory

  • Sold in box quantities only
  • 12 pieces per box
1005-2-8'

Aluminum Bottom Retainer U-Shaped 8' Long**Actual Length 8'1"**

  • For door thickness 2"
T112

Manaras Trolley Track 12ft for 3/4HP & All APT models *Actual length 174"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
T114

Manaras Trolley Track 14ft for 3/4HP & All APT models up-charge *Actual length 198"*

  • For models MGT/OTH/OTBH 3/4 hp only with Chain #41
K-T5011L4

LiftMaster Electrical Box Replacement Kit L4 K-T74-33015-1 ** Price by Quote Only

  • For models APT T SD 115V 1Ph L4
25-2006

LiftMaster 6 Amp Overload Fuse

  • For models: SL585-50-21 SL858-50-81 SL595-50-21 SL595-50-81 SL575-50-21 SL575-50-81
2376.162_18.750

Whiting Torsion assembly .162 wire size 18" spring length 75" shaft

LD-11

EMX Base Socket 11-Pin DIN Rail Mountable Black (Was formally Grey)

  • For use with D-TEK detectors (most commonly used)
  • Hourglass shaped
BSG115-LED

Devanco Stop and Go Light Black Housing 115V LED

  • LED Traffic Light Red/Green Dock Light
  • Weather-proof 2 piece housing with highest available UV rating
  • Ultra bright LED's for easy viewing in direct sunlight
  • Lenses measure nearly 4" in diameter
  • Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
  • Made in Canada
    • .......more details
Installation InstructionsInstructions d'installationSell Sheet
OVERLOAD019

Manaras Telemecanique Overload Base

26-40039

Truck Door Offset U-Channel Seal Retainer 98" Long for Whiting DryFreight Doors *** Obsolete

  • Aluminum extrusion construction.
  • Retainer is offset to allow header clearence with seal when door is in open position.
  • For use with offset bottom seal #26-40045
MA024

LiftMaster Round Aluminum Arm Yellow/Black Stripes 12ft ***NLA Repl. by MA024RDOT

  • For use on Mega-Arm gate operator
  • Replacement part MA024RDOT
CONTACTOR043

Manaras Reversing Contactor Allen Bradley 16A-24VAC

  • AB #100-C16*10
MH00001

Micanan Bronze T-Bushing 3/8" ID

  • 2 required per operator
MD-00057

Sprocket 50B36 1" shaft 1/4" KW

  • 36 tooth sprocket for #50 chain
1003-3"-PER-FT

Bottom U-Rubber 3" Black Sold per Foot

414001

Linear 4-Channel Multi-Code Visor Transmitter 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches
  • Power: 9-volt battery
  • Codes: 512 codes for each channel (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Installation Manual
MK00642

Micanan Smart 10.0 Full Feature Circuit Board with Contactor Interface Monitored 575V

  • For all HP - 575V all voltages 1.5 2 3 & 5HP
Instructions Manual
37028G.S

Genie Circuit Board for Retail Model 1022 ** Repl. by 39537R.S (no cover)

  • Compatible with Genie 1022 1042 ChainLift 600 and QuietLift 600 models.
  • Purple
4011-6FT

Aluminum Retainer only for Light Brush or Vinyl Insert 6' Long 90 degree ** To extent of Inventory. *** Sold in 12ft Lengths Only

  • For angle application - 90 degree
  • For use with Light Brush or Vinyl Insert.
  • For applications that require both brush and vinyl
GH4416-08-R

Green Hinge #8 12-ga Right Hand *** No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-07-R

Green Hinge #7 12-ga Right Hand *** to extent of inventory

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
GH4416-01-R

Green Hinge #1 12-ga Right Hand ***No longer available

  • A unique spring-loaded hinge that allows automatic adjustment of the door.
  • Provides a close tight seal of the door to the building
  • Green powder coat finish
  • For doors up to 20ft
S142ARNN924

Carlo Gavazzi Amplifier 24V

  • Processor controlled amplifier for one set of photoelectric sensors type MOFTR.
  • 11-pin circular plug for easy connection.
  • 8A SPDT relay output NPN/ PNP transistor output or alarm output.
  • Diagnostics for sensor test during operation.
  • Alignment help via LED or alternation of alarm output.
  • Level indication for dirt accumulation.
    • .......more details
Installation Manual
737

Fasteners Round Head Carriage Bolt 3/8-16 x 3/4" 1000/Box

  • Gr. 5 Zinc
MA013

LiftMaster Shear Pin #6 (Standard)

  • For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
  • Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear
100MAPS

LiftMaster External Power Supply 110VAC Input 12VDC 2000mA

  • Provides enough power to operate two LC-36A light curtains.
  • Includes 38' cable leads
156871

Decorative Hinge Yorktown Style 16" Stamped Steel sold per piece

  • 16" hinge strap only
  • Black stamped steel
  • Mounting hardware sold separately
  • Sold per piece
27-48-130

Extension Spring 8' Door - 130 lbs Yellow

  • Single - Loop
  • 27" long 48" stretch 130 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
27-48-100

Extension Spring 8' Door - 100 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 100 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
H12G07-SS

Hinge #7 x 12 gauge Stainless Steel

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
K77-36541

LiftMaster Antenna

  • For various gate operators
ME120-BLK-E-5FT

Miller Edge 2-Wire Black End Outlet 5 ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualSell Sheet
MP00017

Micanan Up-Charge Track and #410 (#48) chain for 18' h Door *Actual length 246"*

  • For 1/3 HP and 1/2 HP operators only
MP00018

Micanan Up-Charge Track and #41 chain for 18' h Door *Actual length 246"*

  • For 3/4 HP and 1 HP operators only
SL316-ZP-COPPER

Zinc Plated Copper Sleeve 3/16" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST316COP. Stops are not zinc plated
6X15SC50

Devanco Loop 6' x 15' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
MD00009

Micanan Roller Chain #41 45 Pitch Drive with Link

  • Length: 4 ft
H753L5-RH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Right Hand

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
    • .......more details
Installation ManualManuel d'InstallationSell sheetBrochure
M003

Rolling Steel Groove Mouth GM679

66003102

Rolling Steel Universal 1/2 Slat Sold per Foot

14FW

Rolling Steel 3" Filler Endlock for Continuous

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
14JW

Rolling Steel 3" Flat Cast Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
EAST/STL-E3

Rolling Steel 3" Cast Eastern Steel Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
2528.110

Whiting Dual-Spring Shaft 110" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • No pre-drilled holes
  • Cross Reference: For Whiting # 2376 balancer
7097

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire Roadside (LH)

  • A Whiting original
  • Cable drum and bearing
7550

Whiting Winding Cone for 2-5/8" ID Spring Wire Roadside (LH)

  • A Whiting original
70.13

Truck Door U-Bolt 1-1/4" long

  • Zinc plated finish
  • Used to attach cables to Whiting doors
SLT17-22

Rolling Steel 2" Flat Slat 22-ga Galvanized

SLT2-22P

Rolling Steel 2" Crowned Slat 22-ga Primed

342.115

Whiting Intermediate Panel Tongue & Groove 11-1/2" x 96" Price on Request

  • Standard size panel primer only
348-CUT

Whiting Tongue & Groove Bottom Panel Assembly with Lock 15-1/2" Cut to Custom Size **Quote Only

  • Cut to exact size required ** customer must specify
  • Primer only
PHOTO-008B

Manaras Non-Monitored Photoelectric Cells Nema 4/12 *** Discontinued

  • Through-beam type 24V
Installation Manual
SL316COP

Copper Sleeve 3/16" 100 Sleeves per Pkg *price on request

  • Oval sleeves ONLY
  • Stops sold separately part # ST316COP
MOD035

Manaras Monitored Photocell Upgrade N1 to N4X

  • Ideal for industrial environments submersible and impact resistant.
  • Flexible design withstands and realigns after mechanical impact.
  • Max. range 45ft.
  • Incl. photoeyes 3ft of conductor wire and mounting hardware.
  • Applies to all operator models with electronic control "M" types.
.363-3-3/4-LH-C

Torsion Spring .363 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .363 ID: 3-3/4" Length: 12 ft
.343-6-LH-C

Torsion Spring .343 x 6" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .343 ID: 6" Length: 12 ft
.331-2-5/8-LH-C

Torsion Spring .331 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 2-5/8" Length: 12 ft
.312-6-RH-C

Torsion Spring .312 x 6" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 6" Length: 12 ft
.283-3-3/4-RH-C

Torsion Spring .283 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 3-3/4" Length: 12 ft
.283-1-3/4-LH-C

Torsion Spring .283 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 1-3/4" Length: 12 ft
.273-2-5/8-LH-C

Torsion Spring .273 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 2-5/8" Length: 12 ft
.273-2-RH-C

Torsion Spring .273 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 2" Length: 12 ft
.273-2-LH-C

Torsion Spring .273 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 2" Length: 12 ft
.243-1-3/4-LH-C

Torsion Spring .243 x 1-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .243 ID: 1-3/4" Length: 12 ft
.218-2-LH-C

Torsion Spring .218 x 2" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .218 ID: 2" Length: 12 ft
.192-1-3/4-RH-C

Torsion Spring .192 x 1-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .192 ID: 1-3/4" Length: 12 ft
44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 240 lb load
.306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Red

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
41A5434-13

LiftMaster Full Belt Assembly for 8ft Door

  • For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D
BK309

Jamb bracket J-09 #9 12 gauge

  • Sold by the piece
  • Height 4.25" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.
BK301

Jamb bracket J-01 #1 12 gauge

  • Sold by the piece
  • Height 2.40" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.