Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.243-2-L

Cut-to-Length Torsion Spring .243 x 2" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.243-134-L

Cut-to-Length Torsion Spring .243 x 1-3/4" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.218-134-R

Cut-to-Length Torsion Spring .218 x 1-3/4" Right Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

120/208/240/480V PRIMARY 24V SECONDARY

535LMC*

LiftMaster Universal Radio Control Receiver 390 MHz **Replaced by 412HMC

Over 100 billion possible codes makes it impossible to duplicate the frequency
Jumper option for momentary or constant relay contact
Specifically for use with most 3-wire systems without a transformer
Accepts up tp 8 Security+ remote control codes and one keyless entry
Will work with LiftMaster Sears Craftsman or Chamberlain remotes with the yellow LED light - Sec+ format
Will work on 2 or 3 wire systems. If your system is 2-wire a 24-volt 85LM transformer is required

.......more details

ME113-R

Miller Edge Black Right Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors
Retrofits easily to 1-1/4" to 1-1/2" sectional doors
Touch sensitive signaling allows for immedita stopping or reversing of motion
For a sectional door: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order.
Lead wire: 22 gauge universal

.......more details

Installation Manual Worksheet Sell Sheet

.421_5-1/4"-LH

Torsion Spring .421 x 5-1/4" x 12ft LH Gold

Wire size: .421
Inside diameter: 5-1/4"
Length: 12 ft

.406_5-1/4"-LH

Torsion Spring .406 x 5-1/4" x 12ft LH Blue/Yellow

Wire size: .406
Inside diameter: 5-1/4"
Length: 12 ft

.437_3-3/4"-LH

Torsion Spring .437 x 3-3/4" x 12ft LH Red/Green

Wire size: .437
Inside diameter: 3-3/4"
Length: 12 ft

.319_3-3/4"-LH

Torsion Spring .319 x 3-3/4" x 12ft LH Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft

.295_3-3/4"-LH

Torsion Spring .295 x 3-3/4" x 12ft LH Blue

Wire size: .295
Inside diameter: 3-3/4"
Length: 12 ft

.250_3-3/4"-LH

Torsion Spring .250 x 3-3/4" x 12ft LH Green

Wire size: .250
Inside diameter: 3-3/4"
Length: 12 ft

.243_3-3/4"-LH

Torsion Spring .243 x 3-3/4" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft

.283_2-5/8"-LH

Torsion Spring .283 x 2-5/8" x 12ft LH White

Wire size: .283
Inside diameter: 2-5/8"
Length: 12 ft

.225_2-5/8"-LH

Torsion Spring .225 x 2-5/8" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 2-5/8"
Length: 12 ft

.243_2"-LH

Torsion Spring .243 x 2" x 12ft LH White/Yellow

Wire size: .243
Inside diameter: 2"
Length: 12 ft

29-31245

LiftMaster Relay 12VDC 250VAC 4-Pin SPDT C & D relay 3-phase only

C & D relay 3-phase only

.295_6"-RH

Torsion Spring .295 x 6" x 12ft RH Blue

Wire size: .295
Inside diameter: 6"
Length: 12 ft

.306_5-1/4"-RH

Torsion Spring .306 x 5-1/4" x 12ft RH Red

Wire size: .306
Inside diameter: 5-1/4"
Length: 12 ft

.421_3-3/4"-RH

Torsion Spring .421 x 3-3/4" x 12ft RH Gold

Wire size: .421
Inside diameter: 3-3/4"
Length: 12 ft

.375_3-3/4"-RH

Torsion Spring .375 x 3-3/4" x 12ft RH Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft

.319_3-3/4"-RH

Torsion Spring .319 x 3-3/4" x 12ft RH Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft

.295_3-3/4"-RH

Torsion Spring .295 x 3-3/4" x 12ft RH Blue

Wire size: .295
Inside diameter: 3-3/4"
Length: 12 ft

.207_2-5/8"-RH

Torsion Spring .207 x 2-5/8" x 12ft RH Brown

Wire size: .207
Inside diameter: 2-5/8"
Length: 12 ft

.218_2-5/8"-RH

Torsion Spring .218 x 2-5/8" x 12ft RH Yellow/Orange

Wire size: .218
Inside diameter: 2-5/8"
Length: 12 ft

.243_2"-RH

Torsion Spring .243 x 2" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 2"
Length: 12 ft

.250_2"-RH

Torsion Spring .250 x 2" x 12ft RH Green

Wire size: .250
Inside diameter: 2"
Length: 12 ft

.225_2"-RH

Torsion Spring .225 x 2" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

.192_2"-RH

Torsion Spring .192 x 2" x 12ft RH Silver

Wire size: .192
Inside diameter: 2"
Length: 12 ft

.234_1-3/4"-RH

Torsion Spring .234 x 1-3/4" x 12ft RH Blue/White

Wire size: .234
Inside diameter: 1-3/4"
Length: 12 ft

.225_1-3/4"-RH

Torsion Spring .225 x 1-3/4" x 12ft RH Orange/Green

Wire size: .225
Inside diameter: 1-3/4"
Length: 12 ft

SEL2641R433-C2P

Erone 2-Relay Stand Alone Power Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (230Vac)
Self-learning memorization
Relays with Pulse step or delayed operating mode.
Power requirements: 12/24Vac/dc
Dimensions: 140 x 115 x 53mm (5.5 x 4.5 x 2in)

.......more details

Installation Manual Wireless System Chart

OSH-6533-ECB

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual Sell Sheet

OSH-6112-ECB

Manaras Opera-SH 1/2HP 120V 1Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

Installation Manual Sell Sheet

OPH-6112-ECB

Manaras Opera-H 1/2HP 120V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

MOUNTSHAFT001

Manaras Clutch Shaft Kit for MJH (pre-1998)

Input / clutch shaft kit for MJH models up to mid-1998
Kit includes V-belt 4L360 to fit with newer deeper pulley
For MJH built after 1999 use MOUNTSHAFT001A

Drawing

LIMIT015

Manaras Single Limit Switch without Lever

No action limit switch - Cherry
Used on Manaras operators built from 2002 to Feb. 2009
Also used as disconnect switch on Opera models

Limit Switch Chart

VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

Used on MJ / MJH models
New belt type A replaces old 4L360. Part number VBELTA34

HAE00032

Linear 8ft Chain Assembly (HCT8)

15.1

Whiting Truck Door Stainless Steel Center Hinge

4008-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree 5/8" Offset

2" with 5/8" Offset
For use with Light Brush or Vinyl Insert

4002-6FT

45 Degree Aluminum Retainer for Light Brush 6' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1014-1-5/8-10'

Rigid Vinyl Bottom Retainer Notched 10' Long

Black - for door thickness of 1-5/8"

1006-1-3/8-24'

Rigid Vinyl Bottom Retainer U-Shaped 24' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1006-1-3/4-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

1006-1-1/2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1003-2-16'

Aluminum Bottom Retainer L-Shaped 16' Long

For 2" thick doors.

1003-2-12'

Aluminum Bottom Retainer L-Shaped 12' Long

For 2" thick doors.

1003-1-5/8-24'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.
DIE # ES18010

1104-18FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 18' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

1104-18FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).

1104-7FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 7' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-12FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 12' Long - Brown (N)

Brown rigid vinyl retainer with brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

9002-24FT

Commercial Side & Top PVC Weather-Strip Clip-On 24' Long *** To Extent of Inventory

Black rigid vinyl retainer with black flexible vinyl insert.
Reverse angle clip-on vinyl retainer.
Side use: clips onto steel jamb.
Also for residential use.

1106-18-BLACK

Commercial Side & Top Weather-Strip 18' Long - Black

Aluminum retainer with black dual fin vinyl

1106-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

Aluminum retainer with black dual fin vinyl

1106-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black dual fin vinyl

1001-24-GREY

Commercial Side & Top Weather-Strip 24' Long - Grey

Aluminum retainer with grey dual-fin vinyl
Sold by full case quantity (10)

1001-12-BLACK

Commercial Side & Top Weather-Strip 12' Long - Black

Aluminum retainer with black dual-fin vinyl

32-48-200

Extension Spring 8' Door - 200 lbs Tan ** Replaced by 27-48-200

Double - Loop
32" long 48" stretch 200 lb load
Springs sold individually

Spec Sheet

32-48-160

Extension Spring 8' Door - 160 lbs Brown ** Replaced by 27-48-160

Double - Loop
32" long 48" stretch 160 lb load
Springs sold individually

Spec Sheet

25-42-160

Extension Spring 7' Door - 160 lbs Brown

Double - Loop
25" long 42" stretch 160 lb load
Sold individually
Rated for 10000 cycles
Same as part number 116

Spec Sheet

25-42-70

Extension Spring 7' Door - 70 lbs Orange

Double - Loop
25" long 42" stretch 70 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

91-00400

Truck Door Step Bolt 1/4"-20 x 1.25" (3/4" head)- Sold Per Piece

Zinc plated finish
Cross Reference: T #80015-1610 120250

26-40037

Truck Door Offset U-Channel Seal Retainer 96" Long for Whiting DryFreight Doors *** To extent of inventory

Aluminum extrusion construction.
Retainer is offset to allow header clearence with seal when door is in open position.
For use with offset bottom seal #26-40040
Cross Reference: W #8280

26-14523

Truck Door Intermediate Panel (13" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

26-14522

Truck Door Intermediate Panel (12" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

CBC18

Thimble 1/8" - 100 per pkg

RS1039

Roller 3" Steel 9" stem 10 ball - To Extent of Inventory. Replaced by RS1039-C

Steel Roller Wheel diameter: 3"
Working length: 8.5"
Overall length: 9.64"
Box qty: 60 Box weight: 49.6 lbs (3-9-10 Steel)

903021ORBG

Operator Reinforced Bracket 21" Galvanized

Comes with clevis and clip pins. 24 per carton

HD3130

End Stile Latch 7-1/2" Lockbar Length

Lockbar Length: 7-1/2"
Throw: 2-1/8" Use with: Lockbar or End Stile
Centerline Distance (key spindle to handle shaft): 2-3/4".
Handle in Bright Chrome Finish Latch in Bright Zinc Plated steel.

6X10SC50

Devanco Loop 6' x 10' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

SOLID_SHAFT_9FT

Solid Shaft 1" Keyed 9 ft Galvanized

Actual length is approx. 9'-1"

8FT-CHAIN-LINEAR

Linear 8ft Chain Rail for residential openers (HCT8C)

8ft chain-drive T-rail for LDO33 LDO50 LSO50 LCO75 & LDCO800 door operators
Fully-assembled & pre-tensioned
Compatible with Model CHCR-7/8 & CHCR-8 carriage house I-rail conversion kits

.283-134-L

Cut-to-Length Torsion Spring .283 x 1-3/4" Left Hand Wound White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

10TD433HH1

BEA 1-Button Digital Transmitter 433 MHz

Transmitter offering means of activation of automatic doors with extended hold feature.
Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
Operating temperature: -10 to 55C
Controls one 10RD433 receiver.

WC-5810

Wheel Chock WC-5810 Pyramid Rubber with U Hook

Solid Rubber Construction
Hook for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 10" long x 5" high

SNACPH39

LiftMaster HID 30-bit Proximity Card Facility Code 9 *Discontinued*

Same as SN000099-30-9
Compatible with KPR2000 reader
Replaced by LMPC2-SN (need to know facility code)

OHJ-6434-ECB

Manaras Heavy-Duty Jackshaft Operator 1 HP 480V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

MD00382

Micanan Roller Chain #41 49 Pitch Drive with Link

For PRO T/TB

HYBRID-BLK-15

Residential Side & Top PVC/Aluminum W/S with cap 15' Long (181") - Black

Black rigid vinyl retainer with aluminum cap and black flexible vinyl seal.
Dual fin vinyl.
Comes with aluminum slide-on cap to hide screws.

Q085

LiftMaster Dolly Cover HCT K09-50756

Same as K09-50756

.468_3-3/4"-RH

Torsion Spring .468 x 3-3/4" x 12ft RH Blue/Orange **NLA

Wire size: .468
Inside diameter: 3-3/4"
Length: 12 ft

LPWKP-G

Linear MegaCode Wireless Keypad 318 MHz Cool Grey **** Replaced by NMTK

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: Three AAA batteries

.......more details

OHJ-6533-ECB

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 600V 3 Ph with Elect. Circuit Board

25 cycles per hour 100 cycles per day
An Industrial duty operator featuring both the patented Hoist-a-Matic a self-engaging chain hoist for manual operation as well as a floor level disconnect
Specifically designed to motorize grills when a manual egress is required
Mechanical brake
Hoist on right standard
Full overload protection

.......more details

Installation Manual Sell Sheet

PRO-GT-7521-U

Micanan 3/4HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-APTB-7583-U

Micanan 3/4HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

C-600-INSTALLED

Cones 6" Factory Installed (Pair)

For do-it-yourself installation use part no. SF600

LB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details