Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
For the protection of vehicles doors and safety of people.
Any upward-acting door may be fitted at the leading edge with an electro-mechanical safety weatherstrip.
This mechanism consists of a formed galvanized steel section covered with vinyl impregnated rubber hinged along the full width of the leading door edge.
Can be adjusted to approximately 2½" (63.5mm) to form a tight weather seal.
The hinge linkage is arranged that minimum pressure is required to activate the electrical control switch causing door to reverse direction of travel to the fully open position.
Reverse switch is enclosed in a galvanized housing with a sliding plunger to assure positive actuation every time.
Chain spreader for installation with 1-1/4" operator shaft and 1-1/4" door shaft
Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
R16 Insulation - Woodgrain with 1 narrow shadow line at the top and bottom of each panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
R16 Insulation - Long Panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator
Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Type: control programming and diagnostics unit for devices equipped with
BusT4 connector
Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands modification or parameters and monitoring of diagnostic data
Maximum number of hourly commands: 64
Event log: storage capacity of 400 events
Operating temperature: from –20°C to +55°C
• Dimensions (mm): 107 x 61 x h 20 (with wall-mounting support: 125 x 70 x h 32)
As a wired keypad it can operate garage door openers and gate openers that require 24 volts or less and accept normally open contacts.
As a wireless keypad it can be used with any gate or garage door opener that receives a 318 MHz RF signal.
The keypad must be used in conjunction with the GTO garage door receiver kit (part # RB709) on any other garage door.
You may program up to 25 different personal entry codes allowing you to give different entry codes to different users
After entering a valid code pressing any key while the gate is opening will stop the gate; pressing any key while the gate is stopped and the gate will reverse direction.
The keypad will not affect the auto-close setting of your gate opener
system.