Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

AW14K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord

  • AW14 12ft. of RAH-500 P-50H 218-27-18 P50
  • Kit Includes: AW14 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
MGJ-5011U-LH

LiftMaster Medium-Duty Logic Gear-Reduced Op. 1/2 HP 115V 1Ph Left Hand

  • MGJ is designed for use on rolling grilles and shutters.
  • Maximum recommended duty cycle: 12 cycles per hour.
  • Heavy-duty wormgear-in-oil-bath speed reducer
  • 3-button station for open/close/stop functionality
  • 315 MHz radio receiver is integral to the Medium-Duty Logic board
  • UL325-2010 Monitored Entrapment Capability (provides primary monitored entrapment protection through monitored photo sensors: either CPS-U or CPS-UN4 or a 4-wire monitored edge using the CPS-EI interface)
  • .......more details
ANT-1A

Linear 7-inch Rubber Duck Mid-Range Antenna *** To Extent of Inventory

  • Antenna for Linear’s 27 MHz mid-range transmitters and receivers
  • Seven-inch ”rubber duck” style
  • Supplied with CON-180A straight antenna connector
  • Order CON-90A connector for right angle antenna mounting
  • Dimensions .65” W x 7” H x .65” D
  • Same as: SNE00031
  • .......more details
MH00109

Micanan Flanged Snap Ring 3/4" ID Precision Bearing

MK00708

Micanan Varistor Harness 230V with Blue Wires

MG00014

Micanan Slotted Hex Nut 3/4"-24UNF

  • PRO-H/HB operator parts
MP-00008

Micanan Two-Door Interlock Modification

  • Only allows one door to be opened at one time
MP00055

Micanan Track and #410 (#48) Chain for 10' h Door *Actual length 150"*

  • For 1/3 & 1/2 HP Micanan trolley operators
MP00053

Micanan Track and #410 (#48) Chain for 7' h Door *Actual length 114"*

  • For 1/3 & 1/2 HP Micanan trolley operators
MK-00429

Micanan Reversing Relay 24VAC Coil 4-Pole QPDT 14-Pin Flange Mount

  • For PRO-LJ LH LHAB
MW-00050

Micanan In-Line Torque Clutch Assembly (MP00232)

  • Friction clutch mounted in between motor and reducer flange
  • Comes with cover and studs
  • New part number MP00232
RESET010

Manaras Resettable Overload Fuse 13A 1 Phase

K74-18379

LiftMaster Hall Effect Sensor for SL575 SL585

  • Hall effect assembly for SL540/570/580/575/585 operators with GL Board
  • Includes: screws flat washers lock washers and replacement instructions
  • Same as: G74G0487
  • This part has a short lead-in wire and will not work with SL590 or SL595
838

Skylink Transmitter / Receiver Set Rolling Code ***NLA

  • Generates new code each time you push the button these codes never to be repeated.
  • 99.99% works with most brands of garage door openers.
  • Ideal replacement for older or obsolete models.
  • Electronic scanners "code grabber" cannot duplicate the operating code.
  • Easy to install & program.
  • Works as a secondary receiver (both original existing receiver and 838 receiver will work simultaneously).
  • .......more details
41A2780

LiftMaster Chain Pulley Bracket Kit

  • Also known as: 1B3214 1A2780 1C2762 41A2780 41B3214
  • Compatible with ATS 2595 3595 models
UR2

3M Gel Connectors Red 26-19 AWG 100/Pkg ** To extent of inventory. Repl. by 703-004

  • Scotchlok Insulation Displacement Connector
  • RUS Listed Full featured
  • Max. Diameter Insulation: 0.082" (2.08 mm)
  • AWG Wire Range: 19-26 AWG Solid Wire
  • Angle: Straight
  • Operating Temp. : -40 to 285 degree F. (-40 to 140 degree C.)
  • .......more details
P220-1K

Heddolf 1-btn Transmitter 9-Dip Switch 318 MHz

  • 318MHz single button 9 trinary dipswitch remote control transmitter
  • Compatible with Allstar and Pulsar
  • Compatible with P294-K receiver
CT751L5

LiftMaster 3/4HP 115/230 Volt 1Ph Com. Trolley Operator with Carwash Mod

  • New Logic 5
  • Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
  • T operators are directly attached to drive and control the door.
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • MyQ Mobile App is a free download with no annual activation fee.
  • .......more details
VL-450-LED

Versa Light Dock Light Model 450 LED 42"

  • Easily Positioned
  • Durable Construction
  • Shock/Vibration Resistant
  • Fan Cooled
  • Circuit Breaker Switch
  • Grounded Plug
  • .......more details
HAE00061

Linear LDCO Control Board BBU Compatible *** USE HAE00077 instead

  • DC motors
38079001

Agri Safety Chain GR 70 3/8" x 69"

  • Min. strength: 20200 lbs
  • Includes hook joiner link & tag
OCS-PANEL

GDI Panel Buttons Open/Close/Stop N1/ N4 G3253

  • Power LED
JDMG-LG-A030

GDI Jackshaft 24VDC Nema 4

  • Brushless DC high reliability high efficiency and low maintenance motor
  • No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
  • Soft start soft stop
  • Includes cycle counter timer-to-close 10ft motor wire harness
  • Battery backup optional (sold separately)
ALUM-431

Aluminum 24" x 100' Spool Bright White / Blanc Pur # 431

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Aluminum on the reverse side
  • Gentek # 431
MG020-B-2E-06

Miller Edge Sensing Edge Black 2-Wire End Outlet 6ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details
MG020-B-2E-04

Miller Edge Sensing Edge Black 2-Wire End Outlet 4ft Long

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details
BCH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by CRBH751L5-RH

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4
  • Brake installed on operator
ALUM-547

Aluminum 24" x 100' Spool Sable / Sablon # 547

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 547
  • Reverse side is #431 Bright White
IRB-MON-RX

EMX Monitored Receiver Board Only

  • Receiver board only for IRB-MON
MIRM-T2

Miller Edge Patriot 2 Photo Eye Monitored 30ft Non-Contact *** No Longer Available

  • Attaches directly to a Sectional door.
  • The photo eyes travel below the door during the closing cycle.
  • Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
  • The Patriot2 non-contact system consists of thru beam photo optics.
  • Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
  • The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.
  • .......more details
MK-318-2

Skylink 2-Button Keychain Transmitter

  • Easy to program.
  • Remove key fob from the car for enhanced security.
  • Compact-size 2-button transmitter can operate two garage doors with GB-318C Garage Door Receiver (sold separately).
  • 3V Lithium battery included.
  • FCC/IC approved.
  • Works Mastercraft made by Skylink
  • .......more details
7001-14-CHARCOL

Commercial Side & Top Weather-Strip 14' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
7001-10-CHARCOL

Commercial Side & Top Weather-Strip 10' Long - Charcoal (H)

  • Charcoal galvanized steel with charcoal dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
K72-13057

LiftMaster Clutch Shaft Kit APT

  • Kit contains: Clutch Plate Clutch Shaft Bearing 3/4" I.D Sprocket 41B10x3/4" 5L Belt Motor Pulley Spring Clutch Disc Shim Washers Castle Nut Flatwashers Cotter Pin Roll Pins and Push on Fastener.
1104-16'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Light Bronze (F) **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-10'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 10' Long - Light Bronze (F). **NLA

  • Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
SPRING-FILLER

Spring Filler for 5-1/4" and 6" Torsion Springs Sold with Pre-Cut Springs only Sold per Inch

  • Required when ordering pre-cut torsion assemblies with cones
LM21XPBBVB

LiftMaster Extended Performance Fire Door Release Device with Battery Backup and Voice Board ** No Longer Available

  • UL864 Revision 9 compliant
  • Programmable DIP switch delay setting - either 10 20 30 or 60 seconds delay of door release to permit passage clearance
  • Inputs for normally open 2- or 4-wire detectors and 4-wire normally closed detectors
  • Trouble and alarm relays for communication with the fire alarm control panel if required
  • Audible trouble sounder to indicate when the release device is not operational
  • On board diagnostic LEDs for easy troubleshooting
  • .......more details
WHITING-DOOR

Whiting Special Order Plywood Core Dry Freight Door Price by Quote Only

  • Special order to customer's specs
  • Premium grade 7 ply 3/4” panels manufactured with a medium density overlay (MDO) laminated to smooth hardwood outer veneers of Transportation Core plywood all designed for optimum strength and appearance.
  • 2" track and rollers for durability.
  • Tongue and groove joint.
  • 2 cable balancer with independent spring for each cable. Springs treated with rust preventative.
  • 4 rows of hinges.
  • .......more details
1104-12FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Bronze (F)

  • Bronze rigid vinyl retainer with bronze flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
3-42-2B

Bottom Bracket with Removable Roller Carrier Commercial 2" & 3" 2-Hole BB-6 Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets (2) Clevis Pins (2) Cotter Pins*

  • Sold as a pair (1-left and 1-right)
  • 13-guage
  • Dimensions: 4-9/16" W x 11" H
  • For 1-3/4" door
PPLV1-10

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 10/PKG

  • Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
  • These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
  • Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
  • Sold in a 10 pack
  • .......more details
BK020/PR-BOLT

Commercial 2" Safety Bottom Bracket with Bolt Sold as a Pair

  • Maximum cable diameter: 3/16"
  • Maximum door weight: 1300 lbs Zinc
  • Plated Steel
  • Sold as a pair
3-26-1

Half Hinge Type S Service Type Door ** Available to Extent of Inventory

  • Half hinge type "S"
  • 16-gauge
BK021/PR-BOLT

Commercial 3" Safety Bottom Bracket with Bolt Sold as a Pair

  • Maximum cable diameter: 1/4"
  • Maximum door weight: 1650 lbs Zinc
  • Plated Steel
  • Sold as a pair
41A6569

LiftMaster Safety Sensor Mounting Kit

  • Replacement brackets only for 41A4373A safety eyes
3950

LiftMaster Jackshaft Door Operator for Comm. Rolling Sheet Doors

  • Designed for commercial rolling sheet door applications only - ideal for self-storage facilities.
  • It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide but not exceeding 650 lbs.
  • Maximum recommended duty cycle: 10 cycles per hour.
  • UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
  • Heavy-duty 24V DC motor provides ultra-quiet operation
  • Push button limit setting
  • .......more details
1003-3-DF-CUT

Bottom U-Rubber 3" Dual Fin Black Sold per Foot

  • Sold in cut-lengths per foot.
  • Dual fin
MB-02002

Micanan Electric Motor Only 3/4HP 110/220V 1PH TEFC

  • Base mount motor fits: TW TBW JW HW HHDW SDW
5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

  • Pierced track
124773

Roller 3" UHMW 7-1/4" Stem Rubber

  • 3" UHMW tire covered with rubber
  • 6202 sealed precision bearing
  • 7-1/4" zinc plated stem
  • Rating: 200lb load; 10000 cycles of a 12' door
  • Helps quiet the operation of jackshaft operators
28020004-500

Cable Stainless 1/16" 1x19 500' Inox *** Price on Request

  • Not for use in aircraft applications
  • 1x19 contruction type 302 / 304
KPW250

LiftMaster New Wireless Commercial Keypad 250-Code Sec.+2.0

  • Comes with a durable blue LED backlight metal keypad and a 5- year lithium battery.
  • KPW250 is perfect for larger commercial applications such as a maintenance door entrance or gated entrance for a small business.
  • Compatible with Security+ 2.0 Security+ as well as Linear Multi-Code 300 MHz
  • 250 permanent PINs and 10 unique temporary PINs mean flexibility to set up multiple users for commercial settings; unique temporary PINs can be set for 1 to 9 uses
  • Allows for removal of a single PIN while maintaining full access for other users
  • Zinc-alloy metal front cover for tough environments
  • .......more details
HBS2UD

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Double End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (4) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For 1-5/8"-2" Doors
  • Fits 2" or 3" Track
  • Double End Stile
  • Pins and Cotters
  • .......more details
HBS2U

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Single End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (2) U-Brackets (2) Clevis Pins (2) Cotter Pins*

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For 1-5/8"-2" Doors
  • Fits 2" or 3" Track
  • Single End Stile
  • Pins and Cotters
  • .......more details
MCJH-453-CONT-R

Lynx Heavy-Duty Jackshaft 3/4 Hp 575V 3 Ph Contactor Right Hand ** Replaced by CDJH

MGS20-Y-2U-05

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 5ft Long

  • Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty
CABLE_316SS5000

Cable 3/16" 7x19 5000' Stainless Steel ** Price on request

UCFL-1-1/4

Self-Aligning Cast Flange Bearing Football Style 1-1/4" Bore UCFL207-20

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
  • 5-1/8" hole center to hole center distance
  • 3500 lbs load rating
ST-ENDCAP

Soft Touch End Caps Sold Individually

ME111-2L-T2

Miller Edge Black Left Hand Outlet Monitored 7/8" wide x 1-1/2" high Sold by the Foot

  • Slide in style edge for barrier gate and counter shutter application.
  • Touch sensitive signaling allows for immediate stopping/reversing of motion depending on application. •10K ohm resistor •Temperature Range: -30F to 155F
  • Lead wire: AWM 22 gauge 2ft length
  • Sensitivity: nominal 6-8 PSI
  • Vertical or horizontal mount
  • ANSI/UL325 recognized component
  • .......more details
25-60502

Truck Door T-Style Ramp Handles Roadside (Left)

  • Black plastic construction
  • Cross ref.: 39504-1
26966A

Genie Idler Pulley for Stealth Chain Drive

  • Fits Genie Stealth model
  • 1/4” bore
  • Channel style rails
41A5021-1G

LiftMaster Receiver Logic Board (41A5021-1I) **to extent of inventory

  • This circuit board works with Security+ openers with no light socket.
  • Same as 41A5021-1I 41a5021-3E 41A2021-1 41A5021-1B 41A5021-1C 41A5021-1D 41A5021-1E 41A5021-1F 041A5021-1G 41A5021-1H
PBS3-GREEN

Replacement Button Only - Green

  • Replacement button for 02-403P
MV00021

Swivel Type Pull Cord - SPST Nema 4

RDGRNCARD

LiftMaster Warning Device Option Board with Red/Green Light Box

  • The Red/Green warning light card flashes a warning light for 10 seconds prior to the Timer to Close activating the door to close.
  • Advanced warning of the door closing helps prevent traffic collisions with the door
  • Controls both 24V & 110V traffic lights
RESET012

Manaras Resettable Overload Fuse 15A 1 Phase

1007-1-5/8-12

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick

  • For door thickness of 1-5/8" to 1-3/4"
26-40410

Truck Door T-Style Standard Side Seal 116"

  • Extruded from long lasting rubber
  • Seal protects cargo area from dirt and moisture
  • Used with standard J channel vertical angle with 1" track
  • Length: 116"
  • Cross reference: T #69840 W #4019 620200
25-2015

LiftMaster 15 Amp Overload Fuse

  • For models: SL585-100-11 SL595-100-11 SL575-100-11
17-10336

LiftMaster Pulley 7.000"OD 3/4" Bore 4L-Belt

1458W

Fasteners Self-Tapping Stainless Steel Hinge Screw with Washer 1/4" x 5/8"

  • 400 Series Stainless Steel
  • Self Threading
  • Washer Head with Rubber Seal
  • Use with Stainless Steel Garage Door Hinges
29200

Doorlec Transformer 208V pr 120V sec 35VA

  • 208V prImary 120V secondary 35VA
MO00001

Micanan Cam Plate Compression Spring (.178 ID)

  • 2 required per operator
  • .178 ID x 032G x 55L)
41D605-1

LiftMaster Electric Motor 80kg/100kg

  • For retail models: WD952KD HD800D and WD952LD
2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
41A5507-B

LiftMaster Receiver Logic Board for 2500 (390 Mhz) ** Discontinued

  • With end-panel
  • Also known as 41A5507 41A5507B
27-48-380

Extension Spring 8' Door - 380 lbs Gold

  • Single - Loop
  • 27" long 48" stretch 380 lb load
  • Sold individually
  • Rated for 10000 cycles
27-48-300

Extension Spring 8' Door - 300 lbs Tan

  • Single - Loop
  • 27" long 48" stretch 300 lb load
  • Sold individually
  • Rated for 10000 cycles
H12G06-SS

Hinge #6 x 12 gauge Stainless Steel **NLA

  • Manufactured with 12ga. Rust-Resistant Stainless Steel
  • Universal Design
  • Fits Most Overhead Sectional Doors
  • Priced Per Each
1224-1-3/4"-WHT

Elton Commercial Window for Flush Doors 1-3/4" thick 1224 White Frame Sealed Glass

  • Screw together window kit
  • Thermal window
  • Frame size: 25-1/8" x 13-1/8"
  • Cut-out size: 24-1/16" x 12"
  • Vision area: 21-11/16" x 9-5/8"
  • Different glass options and frame colours are available upon request
  • .......more details
21-10340

Transformer 115-24V AC 20VA

  • 120V Primary 24V Secondary 20VA
23-10916

LiftMaster Hoist Interlock Switch SPDT

  • Interlock switch for LM commercial door openers with hoist disconnects
  • 15A 125/250VAC
PRO-HBH-7511U-L

Micanan 3/4HP 115V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 3/4 HP115V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • .......more details
14-J

Rolling Steel 3" Flat Endlock

  • Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
  • Continuous endlocks are both ends of every slat.
  • Rivets included with endlocks
SLT14-20P

Rolling Steel 3" Flat Slat 20-ga Primed

SLT17-20

Rolling Steel 2" Flat Slat 20-ga Galvanized

SOLID_SHAFT_21'

Solid Shaft 1" Keyed 21 ft Galvanized

  • Actual length is approx. 21'-1"
44-60-240

Extension Spring 10' Door - 240 lbs Silver ** By Quote Only

  • Clipped ends
  • 44" long 60" stretch 240 lb load
BOARD066R

Manaras Replacement Power Board ***No Longer Available

  • Used on all Manaras circuit board type operators
1715.20

Whiting Stainless Steel 2-Hole Grab Handle

DF090.2

Whiting Dry Freight Door 3/4" without Track or Balancer

  • Original Whiting dry freight replacement door for serial # 99164
Q300

LiftMaster Traveler Carriage for Miracle-One**Discontinued

  • Replacement traveler carriage for Liftmaster Elite Miracle-1 model
  • Same as part no. K75-50341
MB-02001

Micanan Electric Motor Only 3/4HP 110/220V 1PH

  • Base Mount motor O.D.P. FR56
  • Used on Micanan's T TB APT J EJ H EHJ HHD & SD
41A5434-11

LiftMaster Full Belt Assembly for 7ft Door For Models 2001 and up

  • For belt drive models: 2500 2580 2280 3500 3280 3280M 3850 8355 2585 3585 2500B & D
K1D6597-1CC

LiftMaster Control Board with Heat Sink CSL24V & CSL24VH

  • Control board for CSL24V and CSL24VH gate operators
  • 014D1058M
IRB-BR

EMX Industries Brackets for Photoeyes Sold as a Pair *** To Extent of Inventory

  • Brackets are predrilled
  • Used for PC-3 P41 P44 P45 and IRB-4X photoeyes
  • Made of metal
  • Sold as a pair
  • 9" x 3" L-Shaped
BK314

Jamb bracket J-14 #14 12 gauge

  • Sold by the piece
  • Height 5.50" Length 1.9" Width 2.45"
  • Bright zinc plated 12 gauge steel
  • 2" long track mounting slot
  • manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.