Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.192-134-R

Cut-to-Length Torsion Spring .192 x 1-3/4" Right Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

H7NA12

Richards-Wilcox Hinge 7NA x 12 Gauge Roller Bracket

Galvanized 12 gauge hinge

K75-19981

LiftMaster Arm Kit Model H/HJ

Compatible with LiftMaster® Models H and HJ Commercial Door Operators

AM-DPR

Linear Dual Proximity Reader

Compatible with most Wiegand formats up to 40 bits
Weather resistant and vandal resistant
4 to 6 inch read range
Supports up to 65000 cards
Easy to install
Integral LED confirms when user access is granted

.......more details

ME120-BLK-2WIRE-E

Miller Edge Black 2-Wire End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

RBH105L5-LH

LiftMaster 1 HP 575 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

CPT-223-50

Miller Edge Bulk Extrusion 50' roll

For DIY quick fixes to repair or replace sensing edges for sectional and rolling steel doors measuring 1-1/2" to 2" thick with a mounting channel.
Sensivity: 15lbs max activation
Lead wire 18"-22 gauge unversal
Wire configuration: N.O.
Electrical interface: sealed module- provides seamless connection to logic or relay type operators
ANSI/UL325 recognized component

.......more details

950-189

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Right Hand

A22KITSKB

Erone Web-Based IP 2-Door Controller A22 w/SOLARKPB Kit *** No longer sold as a kit

Atrium 2-Door Controller Kit Web Based IP Hybrid
Module Embedded Web Server Includes 2 SOLAR Keypad/Reader Software
Pre-assembled universal plug-in power supply (120V/240V) included
Convert any A22 door controller to an A22EC elevator controller by simply updating the firmware for free (up to 256 floors)
On-board Ethernet Port with AES 256-bit encryption
Auto-detect hardware modules Quick and easy card enrollment procedure

.......more details

Installation Manual Wireless System Chart

K20-1150C-2P

LiftMaster Electric Motor 1-1/2 HP 115/230V 1Ph TEFC

Replacement electric motor for SL595-15021 and SL595-15011 models

0/7530/248

Automatic Systems 5/8 Right Hand Rod End with Zerk

Used on the BL229 gate op.

0/7530/249

Automatic Systems 5/8 Left Hand Rod End with Zerk

Used on the BL229 gate op.

10W8

Resistor 10W 8K OHM

SF514-S

Spring Fitting 5-1/4" Stationary Side Only for 1" & 1-1/4" shaft

Can be used with either 1" or 1-1/4" winding cones
Includes: (1) stationary side only.
2 x 3/8-16 thread holes at CC=4.25"

SF514U-114-W

Spring Fitting 5-1/4" Winding Side Only for 1-1/4" shaft

Universal thread for use in either LH or RH wound springs.
Includes: (1) winding side only

ME123-2M-BLK-LH

Miller Edge Black LH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

ULTRA-DIN

EMX Industries DIN Rail Mount Vehicle Loop Detector

Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Easy to install and setup with the ULTRAMETER™ sensitivity display
Low current draw – green product
Easy identification of interference problems using the crosstalk and RFI interference display
Fits into small operator housings saving space size: 80 x 23 x 84 mm
10 sensitivity settings

.......more details

CGH101L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1 HP 115/230V 1P L5 - Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except when a MOD is added
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

2500-2347

Linear Limit Switch SPDT Omron D2VW

SPRING-GALV-144

Torsion Spring Galvanized Wire Full Length Custom Order

Custom galvanized wire spring ordered to suit

30004

Doorlec Brake Solenoid 460V with wire leads

AW-10

Miller Edge Air Wave Switch Only No Enclosure

Air pressure is lead via a hose or pipe to a diaphragm contact. This contact converts the positive or negative pressure into an electrical contact and pulse.
Applications: commercial sectional doors rolling doors and mass transit
Works on doors up to 60ft
Can be used with standard pneumatic hose and Miller Edge extrusion
Sensitivity: 2mm to 500mm
Ambient temperature range: -49F to 180F

.......more details

Instruction manual Sell sheet

VMD202-R

EMX Remote Tuning and Adjustment Control Device

If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
The VMD202-R may then be removed or left in place as desired.

T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

7M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M7BAR Barrier Gate

Bar assembly comes with:
(1)XBA15 -- 3M BAR
(1)XBA14 -- 4M BAR
(1)XBA9 -- EXPANSION JOINT FOR CONNECTING BARS
(2)XBA13 -- RUBBER IMPACT PROTECTION STRIP
(2) WA10 -- RED ADHESIVE REFLECTIVE STRIPS

.......more details

CP-BRK-CAM-MCJ

Lynx Retaining Plate & Hardware for MCJH

2806.162.18

Whiting .162 x 2-3/16 x 18" Roadside with Cones

SELECTOR-BTN-8L5

Devanco replacement rotating black button for 8L5-OCS

replacement black button but for rotating 8 position selector for 8L5-OCS

CP-SH-58-1012

Lynx Center Shaft Only for MCJH 5/8" x 10-1/2"

DHJ501L5-LH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Left Hand***Discontinued

Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
Optimal for shopping mall applications with heavier rolling doors and grilles.
Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
Industrial Ball Bearings on 1" Output Shaft
Second Floor-Level Disconnect for Manual Lifting in an Emergency

.......more details

LV-24-TL-RG

Narrow Lights for Loading Docks Red / Green LED 12-24VAC/DC 24-3/8" long Sold Individually

LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
Robust housing resists impact and corrosion.
Slim discrete design ensures little risk of damage due to accidental impact.
Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
Boards coated in water-resistant polymer for optimal protection from water and humidity.
24 LEDs per guide light (12 Red 12 Green)

.......more details

M7A

Safety Inertia Brake 1-1/2" Bore 6266 Torque

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and rolling doors.
Normal Torque: 6266 lbf.in
Locking Torque: 29199 lbf.in

Reference manual Technical data Sell sheet

50430-KEY

Doorlec PBS 2-Btn O/C and Key Switch On/Off Nema 4/12

Open / Close with On / Off Key Switch Nema 4/12
Green - Open Black - Close

MP00069

Micanan Jackshaft w/Aux Trolley Assembly Mod. 7ft High Door #41 Trolley Drive Chain

Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
NOTE: Operator must be supplied with reverse limits
If purchasing for field install the limits on the operator would need to be reversed

MT22-MON-GRY-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Gray Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

USVD-BD

EMX Board Only for Ultra Sonic Vehicle Detector

Replacement board only for USVD-4X

K72-12591

LiftMaster Clutch Shaft Kit HMJ

HW0427-LH

SteelCraft Commercial Bottom Bracket Left Hand Only

Left Hand bracket only
Can be used for both 2" and 3" tracks
To be used on door tracks that are installed wide enough to accomodate the side cable pulley
Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
Adjustable cable can level door from the ground
Heavy gauge steel construction

.......more details

CH503L5-LH

LiftMaster Hoist Op. with Carwash Mod. 1/2 HP 208-230V/460 VAC 3 PH Logic 5 Left Hand

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

MIL-HYD-KIT

Milwaukee M18 Fuel 1/4" Hex Hydraulic Impact Driver Kit 2760-22CT

Kit includes: Tool carrying case (2) M18 REDLITHIUM 2.0 Compact Battery Packs and charger
FLUID-DRIVE™ Hydraulic Powertrain:
Reduces metal-on-metal contact inside the tool
Minimizes wear for increased durability compared to standard impact drivers
Delivers smoother performance longer service life and quieter operation
Completely sealed mechanism filled with hydraulic fluid

.......more details

WHITING-PW

Whiting White Urethane Topcoat Option Dry Freight Door Panel

This is an option when ordering a panel

K76-34697

LiftMaster APS Encoder 24V

For use with various LiftMaster® Commercial Slide and Overhead Gate Operators

Q210

LiftMaster Gear Box Kit #70 K75-50224

For use with various LiftMaster® Commercial Swing Gate Operators manufactured after 1997

MOUNTSHAFT018E

Manaras Limit Shaft Kit For Damp/Corrosive Env.

For operators with W or C Modification

CAP425

Capacitor Motor Start 125VAC 425MFD

Motor Start Capacitor 125V 425 MFD

10-12360

LiftMaster Universal Hood Angle Mounting Bracket 10-12360M1

Heavy gauge steel bracket for vertical or horizontal mount on either front or top of coil on a rolling door.
Has a variety of mounting hole patterns compatible with many OEM manufactures
For use with J H DJ DH
May be welded

BG790-5021

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 230V 1Ph - Comes w/Arm & Counterweight

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
Standard Features: Control inputs and Adjustable limit settings
02-102 Open/Close Push Button Included

41D8859

LiftMaster Cover 8550WL WLED

Burgundy Replacement Cover.
This one piece cover is compatible with various LiftMaster® Lock Capable Garage Door Openers Powered by myQ®; manufactured after 2017

41D9202

LiftMaster End Panel Driver Board ** Discontinued

041D9202 is a Front End Panel with LED Light Connector/Driver Board Replacement Kit.
For use with LiftMaster® and Chamberlain® Residential Garage Door Openers; manufactured after 2018.
Compatible with the WLED model

41D0277-1

LiftMaster Transformer WiFi Battery Backup

For Wi-Fi Battery backup garage door openers; manufactured after 2011
Same as #204D0277-1

2705.148_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

Most common torsion spring for cube trucks
Specs: .148 x 2-3/16" x 18" Long
For Roadside order part # 2704.148*180

31117

Doorlec Sprocket 41B12-1" Bore. KW/SS

Q237

LiftMaster Crank Input for SL3000 (K75-50242) ** Discontinued

FEP100N

Pneumatic Safety Edge End Caps Included Sold by the Foot

Must specify if L-retainer is required

K20-3200C-4TP

LiftMaster Electric Motor 1-1/2 HP 230/460V 3PH CF TEFC

Also known as: K20-3200C-4TP 20-3150C-4T K20-3200C4T 20-3200C-4T

MOTOR009

Manaras Electric Motor1/2HP 120/240V 1PH

Instant reverse intermittent-duty electric motor only for MTBL MJ MJH MTH & MTBH models
1725 rpm built-in reset

PRO-APTC-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

33102

Doorlec Overload 1.20 to 2.00 Amps

PRO-GHC-10053U-L

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Left Hand

External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation
Full function Smart 10.0 logic board and on-board receiver

.......more details

SPRAY-431

Aluminum Touch Up Spray Paint 350g Bright White / Blanc Pur #431

350g
Replaces Gentek #801

210134

Skylink Pulley Assembly - Belt

Fits Skylink & Mastercraft 046-0266-0 belt model openers

26CW945215-CUT

Truck Door Intermediate Panel (11.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

These panels are cut to customer's exact measurements.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

K001D7121-1

LiftMaster Main Board EL1SS

Replacement board only

AVP-KEY

Cylinder Key for AVP-1

Key only

SETR2641AM2KH

Erone 2-Channel Mini Transmitter with HID Tag Black 433MHz

With built-in HID tag
Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

MD-00348

Sprocket 50B26 x 1" 1/4" KW 2SS

PRO-GH-10011U-L

Micanan 1 HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

ALUM-5P5

Aluminum 24" x 100' Spool Graphite # 5P5

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P5
Reverse side is #431 Bright White

Colour chart

GH-6533-0000-CBOX

Manaras Control Box for GH 600V

Control box only

PRO-4X_MOD_5HP

Micanan Nema 4X Modification 5HP

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
For 5HP motors

36-54-200

Extension Spring 9' Door - 200 lbs *** Special Order

Clipped ends
36" long 54" stretch 200 lb load

PRO-GH-5043U-L

Micanan 1/2HP 460V 3P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details