Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Top
.207-3-8.25-LHW

Mini Storage Spring .207 x 3" x 8.25" long Left Hand

V5001-DARK-OAK

Replacement Vinyl Only for 5001-DOD Sold per Foot

2376.177_27.830

Whiting Torsion assembly .177 wire size 27" spring length 83" shaft

4X12SC50

Devanco Loop 4' x 12' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation manualManuel d'installationLoop placement guideGuide de positionnement des boucles
126474-7K

Spring Failure Device For 1" Shaft RH & LH Assembly

  • Designed to reduce the risk of the door falling in the event of spring breakage
  • 3-3/8" offset between wall and shaft (separate extension bracket available for offset of 4-3/8" up to 6")
  • For 1" shaft (1-1/4" shaft available for special order)
  • Fits 1-3/4"-6" Torsion Springs
  • One device per spring is required
  • Not for use with duplex springs
    • .......more details
K74-MODELH

LiftMaster Main Wire Harness L3

2807.148.140

Whiting .148 x 2-3/16 x 14" Curbside with Cones

AW12K500-12

Miller Edge Air Wave Kit 12ft No Coil Cord**Discontinued

  • Kit Includes: AW12 Air Wave Switch Barbed Coupler (12') RAH-500 1/2" dia. Rubber Hose Wire Nuts End Plugs
PIVIN-BCSI-BASE

Base Only for BCSI Gate Operator

2376.177_27.850

Whiting Torsion assembly .177 wire size 27" spring length 85" shaft

DT3+1

Linear 3+1 Channel Transmitter 310 MHz

  • Activates one GRD gate receiver and up to three separate Delta-3 receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 independent codes for gate + 64 multi-channel codes for doors (set by dip switches)
  • Frequency: 310 MHz
    • .......more details
Programming Instructions
.218-3-144-LH

Torsion Spring Mini Storage .218 x 3" x 12ft Left Hand

2806.156.195

Whiting .156 x 2-3/16 x 19.5" Roadside with Cones

2807.156.195

Whiting .156 x 2-3/16 x 19.5" Curbside with Cones

K20-1050B-1RL

LiftMaster Electric Motor 1/2 HP 115V 1Ph BM

  • 1/2HP 115V 1 PH resilient base mount motor with one drive shaft key.
  • Check the manual for your specific model number before ordering to ensure compatibility.
5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

  • Pierced track
K72-33873

LiftMaster Output Shaft Kit MT / BMT

  • Complete kit includes output shaft bearings sprockets chain roll pin and turac
26-945255

Truck Door Intermediate Panel (15.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
8086.225.325

Whiting .225 x 2-5/8 IN x 32-1/2" Roadside with Cones

  • An original Whiting assembly
8087.225.325

Whiting .225 x 2-5/8 IN x 32-1/2" Curbside with Cones

  • An original Whiting assembly
7001-WG-8-DO

Residential Wood Grain Side & Top W/S Dark Oak 8' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-7-DO

Residential Wood Grain Side & Top W/S Dark Oak 7' Long - Painted Screws to Match

  • Dark Oak retainer with Dark Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
7001-WG-8-CO

Residential Wood Grain Side & Top W/S Cherry Oak 8' Long - Painted Screws to Match

  • Cherry Oak retainer with Cherry Oak vinyl
  • PVC Wrapped
  • Steel is Notched on Both Ends for Easier Installation
  • Economical
  • Dual Fin Vinyl
  • Painted Screws to Match
    • .......more details
42-8116-1

LiftMaster Terminal Block 16-Position

11-10987

LiftMaster Clutch Shaft for MH

.331-3-3/4-LH-C

Torsion Spring .331 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .331 ID: 3-3/4" Length: 12 ft
.312-3-3/4-RH-C

Torsion Spring .312 x 3-3/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 3-3/4" Length: 12 ft
.312-3-3/4-LH-C

Torsion Spring .312 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .312 ID: 3-3/4" Length: 12 ft
.306-3-3/4-LH-C

Torsion Spring .306 x 3-3/4" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .306 ID: 3-3/4" Length: 12 ft
.273-2-5/8-LH-C

Torsion Spring .273 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .273 ID: 2-5/8" Length: 12 ft
.207-2-5/8-LH-C

Torsion Spring .207 x 2-5/8" x 144" LH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .207 ID: 2-5/8" Length: 12 ft
OGH-6233-ECB

Manaras 3/4 HP 208V 3Ph Gear Head Operator with Elect. Circuit Board

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
Installation ManualSell Sheet
OMJ-6112-ECB

Manaras Medium-Duty Jackshaft Operator 1/2 HP 120V with Electronic Circuit Board

  • Designed for use on standard high and vertical lift sectional doors
  • Can also be used on small rolling doors and grills
  • Single phase intermittent-duty motor has instant reverse and internal automatic reset thermal overload protection
  • Mechanical brake
  • Floor level disconnect mechanism which must be engaged for manual push-up operation
  • 14 cycles per hour 50 cycles per day
    • .......more details
Installation ManualSell Sheet
2704.171_250

Whiting Roadside Torsion Spring 2-3/16" ID 25" Long

  • Torsion spring wire only
  • .171 wire size
41C2735

LiftMaster Chain and Cable Assembly CMC84

  • Fits a Sears Craftman CMC84 operator
41A5624-8

LiftMaster DC Passpoint Assembly

  • Travel Module for 3850
.393_6"-LH

Torsion Spring .393 x 6" x 12ft LH Orange

  • Wire size: .393
  • Inside diameter: 6"
  • Length: 12 ft
.343_6"-LH

Torsion Spring .343 x 6" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 6"
  • Length: 12 ft
.363_5-1/4"-LH

Torsion Spring .363 x 5-1/4" x 12ft LH Green/White

  • Wire size: .363
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.273_2-5/8"-LH

Torsion Spring .273 x 2-5/8" x 12ft LH Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
.295_1-3/4"-LH

Torsion Spring .295 x 1-3/4" x 12ft LH Blue

  • Wire size: .295
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.243_1-3/4"-LH

Torsion Spring .243 x 1-3/4" x 12ft LH White/Yellow

  • Wire size: .243
  • Inside diameter: 1-3/4"
  • Length: 12 ft
71-B240H

LiftMaster Interior Brake Kit with Cable 230-460V (Logic 3 4 and early 5 Disc and Pad Models)

  • Interior mount brake kit for operation with chain hoist
Instruction Manual
.406_6"-RH

Torsion Spring .406 x 6" x 12ft RH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 6"
  • Length: 12 ft
.312_5-1/4"-RH

Torsion Spring .312 x 5-1/4" x 12ft RH Yellow

  • Wire size: .312
  • Inside diameter: 5-1/4"
  • Length: 12 ft
2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick max 96" wide
  • Includes Lock and keeper
2237.096

Whiting Coldsaver Intermediate Panel 13-1/2" x 96"

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
2234.096

Whiting Coldsaver Bottom Panel 12-1/2" x Max 96" with seal and retainer ** Cut to Length

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
32-48-90

Extension Spring 8' Door - 90 lbs Light Blue ** check for availability

  • Double - Loop
  • 32" long 48" stretch 90 lb load
  • Springs sold individually
32-48-70

Extension Spring 8' Door - 70 lbs Orange ** check for availability

  • Double - Loop
  • 32" long 48" stretch 70 lb load
  • Springs sold individually
32-48-50

Extension Spring 8' Door - 50 lbs Red ** check for availability

  • Double - Loop
  • 32" long 48" stretch 50 lb load
  • Springs sold individually
.234_1-3/4"-LH

Torsion Spring .234 x 1-3/4" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 1-3/4"
  • Length: 12 ft
.312_2-5/8"-LH

Torsion Spring .312 x 2-5/8" x 12ft LH Yellow

  • Wire size: .312
  • Inside diameter: 2-5/8"
  • Length: 12 ft
7176.235*34.930

Whiting Heavy Duty Torsion Assembly .235 x 34" shaft 93"

.25W8.2

Resistor 1/4 W 8.2K OHM

  • Dimensions (W X H X L) 6 X 15 X 3 CM
.218_2-5/8"-LH

Torsion Spring .218 x 2-5/8" x 12ft LH Yellow/Orange

  • Wire size: .218
  • Inside diameter: 2-5/8"
  • Length: 12 ft
2806.177*230

Whiting Spring Assby .177 x 2-3/16 x 23" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 23" Long
  • Roadside
  • For Curbside order part # 2807.177*230
.319_6"-RH

Torsion Spring .319 x 6" x 12ft RH Blue/Green

  • Wire size: .319
  • Inside diameter: 6"
  • Length: 12 ft
.363-334-L

Cut-to-Length Torsion Spring .362 x 3-3/4" Left Hand Wound Green/White

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
99552NYHNG

Nylon Hinge Black #2 *** To extent of inventory

  • Equivalent to 14-ga in strength
77.2

Whiting Stainless Steel Outside Cam Lock

Q025

LiftMaster Motor Pulley 2-1/2" OD 1/2" Bore (K17-50098)

  • Replacement motor pulley of motor output shaft for Liftmaster Elite models SL3000UL and CSW2000UL
026-122

Blue Giant Heater Element **Special Order

  • Price by Quote Only
GALV-331-6-R

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
  • Galvanized
GALV-331-6-L

Cut-to-Length Torsion Spring .331 x 6" Left Hand Wound Galvanized Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
  • Galvanized
GALV-331-6-144-R

Torsion Spring .331 x 6" x 12ft RH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
CYL-3BXLT

Replacement Cylinder Only for 3BXLT Comes with 2 Keys

GHX-383-3/4HP-RH

Doorlec Explosion Proof Gear Head 3/4 HP 208V 3PH ECB Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station
MX001777

HySecurity Limit Switch D2VW-5L3-1HS

  • Switch type: mechanical limit switch
  • Model: D2VW-5L3-1HS
  • Activates on contact to trigger gate control logic
  • Sealed housing for environmental resistance
111-1899

RW End Blind/Cover 31 track Sold Individually

  • Covers the end of the track to help keep out dirt and debris
MT21-2M-BLACK-RH

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Black Right Hand Outlet Sold per Foot

  • €¢Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
2807.177*250

Whiting Spring Assby .177 x 2-3/16 x 25" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 25" Long
  • For Roadside order part # 2806.177.250
GALV-319-6-144-R

Torsion Spring .319 x 6" x 12ft RH Galvanized Blue/Green

  • Wire size: .319
  • Inside diameter: 6"
  • Length: 12 ft
GALV-319-6-L

Cut-to-Length Torsion Spring .319 x 6" Left Hand Galvanized Blue/Green

  • Spring wire only. Cones and Filler extra
2376.177*34.960

Whiting Torsion assembly .177 wire size 34" spring length 96" shaft

2807.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 343" Long
  • For Roadside order part # 2806.177.340
K10-10371

LiftMaster Straight Door Arm

  • Also known as: 105368 10-10371
  • For use with various LiftMaster® Commercial Door Operators; manufactured prior to 2005 only
2376.200.35.930

Whiting Torsion assembly .200 wire size 35" spring length 93" shaft

MGH-6215-M-N1-RH

Manaras 1.5 HP 240V 1P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
GALV-283-2-L

Cut-to-Length Torsion Spring .283 x 2" Left Hand Wound Galvanized White Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
2807.192.320

Whiting .192 x 2-3/16 x 32" Curbside with Cones

GHW-311-1.5HP-RH

Doorlec Ind. Duty Jackshaft Carwash Op. 1-1/2 HP 115V 1P with ECB

  • With DC2000 logic board
  • Worm-Gear Jackshaft type Industrial operator NEMA 4/12
GALV-225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" LHW Galvanized Orange/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-225-258-R

Cut-to-Length Torsion Spring .225 x 2-5/8" RHW Galvanized Orange/Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-225-258-144-R

Torsion Spring .225 x 2-5/8" x 12ft RH Galvanized Orange/Green

  • Wire size: .225
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
2376.200.30.870

Whiting Torsion assembly .200 wire size 30" spring length 87" shaft

K79-13493A-300

LiftMaster FDOA Control Board LMPLC

  • Also known as: K29-FDOA-300
  • For use with various LiftMaster® Commercial Fire Door Operators
MINI-218-3-10-LH-W

Mini Storage Spring .218 x 3" x 10" LH Wagner End ***Price on Request

  • Special Order. Price valid on in stock springs only
2806.177*270

Whiting Spring Assby .177 x 2-3/16 x 27" Roadside

  • Replacement torsion spring with cones
  • Specs: .171 x 2-3/16" x 27" Long
  • Roadside
  • For Curbside order part # 2807.177*270
2376.187*31.950

Whiting Torsion assembly .187 wire size 31" spring length 95" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
89029.0040

Todco Carriage Bolt SS 1/4-20 x 1-1/4" Splined

80352.4200

Todco Nut Hex 1/4"-20 PLTD

K07-8063

LiftMaster Upper Crank BG790

  • Also known as: 07-8063 078063 G078063
K10-37598

LiftMaster Cover HCT

  • For use with various LiftMaster® HCT Series Overhead Gate Operators and Perimeter Access Solutions
K77-10473

LiftMaster Hardware Kit SD GSD

  • Also known as: 305PBSDGSD
  • Replacement Single Slide Door Hardware Kit.
  • Compatible with LiftMaster® Models SD and GSD Commercial Door Operators
2376.206.325.890

Whiting Torsion assembly .206 wire size 32-1/2" spring length 89" shaft

111031.0001.S

Overhead Door Link Hoist Release RSX

  • Hoist link for the Overhead Door RSX (rolling steel - hoist) commercial operator
K94-38062-2

LiftMaster Power Board ID Resistor 1HP 3PH

  • This is replacement Power Board ID Resistor (1HP 3PH). Compatible with LiftMaster® Models SL585U and SL595U Slide Operators
10.1002.36

Truck Door Rivet 1/4 x 1-1/8 - 3/4 HD for #7515 Keeper Sold per Unit

  • Standard rivet used for installing #7515 Keeper
  • 3 rivets are required per keeper
K1D8059-1CC

LiftMaster Main Control Board with Heat Sink

  • This is a Pre-UL2016 Seven Segment Main Control Board with Heat Sink.
  • Compatible with LiftMaster® Models CSL24VDC CSW24VDC RSL12VDC and RSW12VDC Pad Mount Gate Operators.
  • Complete replacement kit includes: logic board adapter harness and installation hardware.