Devanco Canada - Get The Right Garage Door Opener‎ and Parts

CARX-20

EMX Accessory Access Card 5404-1

3.4" x 1.2" x 0.1" (ISO standard size)
Reinforced for long life
Mifare 26 bit Wiegand Format
Durable access card for use on the CR-2000 and PRX-320
Easy and convenient use - just swipe in front of sensor
Secure and can be disabled individually at any time

CR-2000

EMX Keypad/Card Reader Waterproof 5401-1

Back-lit keys for nighttime operation
2000 users (card or passcode)
Rugged waterproof design and vandal resistant
9-24 VDC
Tamper alarm
Door call button

.......more details

Instruction Manual Spec Sheet

K75-18618

LiftMaster Disconnect Kit for Grey SL595

Kit includes: Disconnect support bracket Detent plate Disconnect lever Release yoke Bevel and Disconnect shaft
Works with SL590 and SL595 Gate operators that are painted Grey

MGR-2

Linear 2-Channel MegaCode Gate Receiver 318 MHz *** To Extent of Inventory

Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Memory: storage for up to 40 MegaCode transmitters
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 1000000+ (MegaCode format)
RF frequency: 318 MHz

.......more details

Installation Manual

15-50B18LGH

Sprocket 18 Teeth 1" Bore 1/4" Keyway

41B7611

LiftMaster Filter Board w/Screws **to extent of inventory

For model: 8550

MU00001

Micanan Swivel Pulley

For models PRO-H / HB

86-CP05-108

LiftMaster Cotter Pin 5/32" x 1-1/2"

25-10502

Truck Door Max Strength Steel Keeper for Todco Roll-Up Doors

Superior strength heavy-duty cast grade 30 steel Zinc plated finish.
Keeper accomodates padlocks and trailer seals
Cross Reference: T #6972 280100

02-111

LiftMaster Pull Switch Assembly *** Available to Extent of Inventory

Swivel end
Nema 1
Same as Pull Cord

.225-134-L

Cut-to-Length Torsion Spring .225 x 1-3/4" Left Hand Wound Orange/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.207-134-L

Cut-to-Length Torsion Spring .207 x 1-3/4" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

8FT-I-BEAM

LiftMaster 8' I-Beam Rail 3708CH / CD1008

I-Beam Chain Drive Rail for model 3595

K001A6424-1

LiftMaster Circuit Board Assembly Kit 2010 390 MHz

Installation Manual

K001A5566

LiftMaster GL Replacement Board ***Discontinued. No Replacement. *** No Longer Available

Replacement Logic Board for LiftMaster Gate Operators
Fits Slide operator SL570 SL575 SL580 SL585 SL590 SL595
Fits Swing operators SW420 SW470 SW490

.421_6"-LH

Torsion Spring .421 x 6" x 12ft LH Gold

Wire size: .421
Inside diameter: 6"
Length: 12 ft

.295_2-5/8"-LH

Torsion Spring .295 x 2-5/8" x 12ft LH Blue

Wire size: .295
Inside diameter: 2-5/8"
Length: 12 ft

71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual

29-31244

LiftMaster Relay 24VDC 6-Pin DPST (A & B Relay) All Operators

CAM004

Manaras Limit Cam

Limit cam for Mountshaft009A 018C 018D
2 cam's required per shaft

CAM005

Manaras Limit Cam 5/8-18 UNF

Limit cam for Mountshaft009
2 cam's required per shaft

24-115-1

Relay 8 terminal 115VAC DPDT

For most operators with contactor
Will work on Liftmaster MH Lynx MCJH and more

.363_5-1/4"-RH

Torsion Spring .363 x 5-1/4" x 12ft RH Green/White

Wire size: .363
Inside diameter: 5-1/4"
Length: 12 ft

.312_2-5/8"-RH

Torsion Spring .312 x 2-5/8" x 12ft RH Yellow

Wire size: .312
Inside diameter: 2-5/8"
Length: 12 ft

41A4373A

LiftMaster Safety Sensor Kit 1993-1998 ** Replaced by 041-0136 & 041-0155-000

For LiftMaster Chamberlain & Sears openers built from 1993-1998
Kit includes: Saftey sensors 24" wire and gel connectors
Replacement: 041-0136 with the 041-0155-000 brackets

373LMC

LiftMaster 3-btn Security+ Transmitter 315MHz

Visor clip and 3V lithium button cell (CR2032) battery included.
Same as Chamberlain model 953D

373LMC Manual

50307

Doorlec Cam Shaft Sub-Assembly EHJ ETH ETBH LJH

For models; EHJ ETBH and ETH
Assembly includes: Cam shaft (26140) Oilite (11801) x 2 Sprocket 41B12-5/8" (31118) Flange Bearing (28002) x 2 and nuts.

17311

Doorlec AT1035D 1-btn Mini Transmitter 313 MHz ** To extent of inventory

One block of 10 dip-switches for programming
Compatible with Doorlec 17307 receiver (DC-3000R)
Includes 12V battery (GP23A)

MJ00013

Micanan Brake Shoe and Drum Assembly

Fits Micanan models: TB APTB JB HB HHD LH LJ & SD
Assembly includes: Both right & left brake shoe and the drum

H14G01

Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#1 position
Use between sections 1 and 2 or in the center position
Same as part number 241

.......more details

VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

Used on MJ / MJH models
New belt type A replaces old 4L360. Part number VBELTA34

RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

Open/Close/Stop remote for 4 doors.
By selecting A B C or D on the rotary switch you can operate any of the four doors.
Comes with LED battery life indicator.
9V battery included.
Can be wall or post mounted.
Must be used with 4 MCR series receivers.

.......more details

Programming Instructions

CABLE-15

Manaras 15ft coax cable extension with BNC connectors

Used on Radio-15 to extend antenna

RADIO-22

Manaras MT3-1000 3-btn transmitter 313 MHz

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included
To extent of inventory replaced by RADIO-EM903

Programming Instructions

308302

Linear 2-Channel Multi-Code Key Ring Transmitter 310 MHz

Open/Close remote for 2 doors
Compatible with 310 MHz Stanley and Multi-Code receivers
Easy access to battery and coding switches - 10 dip switches
Power: 12-volt battery
Codes: 1024 codes for each channel (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

108210

Linear 1-Channel Multi-Code Key Ring Transmitter 310 MHz

Open/Close mini remote for 1 door
Compatible with 310 MHz Stanley and Multi-Code receivers
Easy access to battery and coding switches - 10 dip switches
Power: 12-volt battery
Codes: 1024 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

1336.4

Whiting Roadside Top Panel Closure Bracket for 8" radius track

217436

Linear Drive Sprocket - Chain (HCT)

300BL

3" Light Brush Insert 6ft Long

Polypropylene bristles
Same as model MS1705

4004-8FT

Aluminum Retainer only for Heavy Brush 8' Long 45 degree

For angle application (45 degree)
For use with Heavy Brush

4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree *** to extent of inventory

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1015-1-3/4-8'

Rigid Vinyl Bottom Retainer Raised Centre 8' Long

Black - for door thickness of 1-3/4"

1006-2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

Black with flexible fin to touch door face.
For door thickness 2"

1006-1-3/8-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-3/8"

1005-1-3/4-16'

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4" • DIE # ES18191

1005-1-3/8-16'

Aluminum Bottom Retainer U-Shaped 16' Long

For door thickness 1-3/8"

1005-1-1/2-24'

Aluminum Bottom Retainer U-Shaped 24' Long

For door thickness 1-1/2"

7001-7-BROWN

Commercial Side & Top Weather-Strip 7' Long - Commercial Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1104-14FT-BLACK

Residential Side & Top PVC Weather-Strip with cap 14' Long - Black (B)

Black rigid vinyl retainer with black flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-16FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 16' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

1104-7FT-CREAM

Residential Side & Top PVC Weather-Strip with cap 7' Long - Cream (C)

Cream rigid vinyl retainer with cream flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Almond

1104-14FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 14' Long - White (W)

White rigid retainer with white flexible vinyl.
Dual fin vinyl.
Comes with cap to hide screws.

32-48-170

Extension Spring 8' Door - 170 lbs Orange ** Replaced by 27-48-170

Double - Loop
32" long 48" stretch 170 lb load
Springs sold individually
Rated for 10000 cycles

Spec Sheet

25-42-160

Extension Spring 7' Door - 160 lbs Brown

Double - Loop
25" long 42" stretch 160 lb load
Sold individually
Rated for 10000 cycles
Same as part number 116

Spec Sheet

95-00115

Truck Door Rivet 1-1/8" Stainless Steel

Stainless steel construction
Round head design
Cross Reference: T #89217-0036

27-20306

Truck Door Balancer Bracket Clamp for Whiting Roll-Up Doors

Steel construction
Plain finish
Clamp includes nuts
Cross Reference: W #2526 for both #2376 & #7176 balancers

R5998

Shaft Collar 1-1/4" OD 2" 2 Set Screws 3/8-16

With 2 set screws

DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads. -
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".

.......more details

DM28VL

Cable Drum Vertical Lift 28' 1350-28 1" Bore Pair

28' Vertical Lift aluminum die cast alloy. •3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".
Mounting: 1" (or 1-1/4" must specify when ordering) solid shaft with 1/4" keyway.

.......more details

SF375

Spring Fitting 3-3/4" Pair (Long Ear)

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

.......more details

H11G02

Hinge #2 x 11 gauge

11 gauge # 2 hinge - 0.69 lbs
Bright zinc-plated
For use with 7/16" stem rollers

EP2979

Exhaust Port 3" with latch long barrel

For use on insulated door panels up to 2" thick.
Inside diameter: 3" Includes fasteners & gaskets.
Polished aluminum finish.

4X8PO50

Devanco Loop 4' x 8' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

.363-514-L

Cut-to-Length Torsion Spring .362 x 5-1/4" Left Hand Wound Green/White

Priced per inch - cones sold separately
For factory installed cones use part no. C-514-INSTALLED

COUPLING019

Manaras Manual Hoist Coupling

For Opera-SH

MTAW22B-R

Miller Edge MT22 Air Wave Black Right Hand Sold by the Foot

Installation Manual Sell Sheet

C-26-1/4X14-134-W

Thermal Window 26-1/4" x 14" for 1-3/4" Cedo Door White

For 1-3/4" thick door

RBH103L5-LH

LiftMaster 1 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

RN1124

Roller 2" Nylon 4" stem 11 ball White

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.69"
Box qty: 150 Box weight: 49 lbs (2-4-11 White Nylon)

MODKIT013A

Manaras Timer to Close Kit 0s-100h Med-Duty

Timer To Close Kit for Manaras Commercial Door Operators with reversing contactor style control box.
Includes Timer base and all required wiring
Detailed installation instructions are included

Installation Manual

029-98090

T-Style UDI Replacement Door White Stainless Steel Pkg 029-98090

For openings within 98" w x 90" h
Hardware attached balancer assembly not included
Manufactured to exact size

990LM

LiftMaster Surge Protector *** No Longer Available

Installation Manual Manuel d'Installation

.243_3-3/4"-RH

Torsion Spring .243 x 3-3/4" x 12ft RH White/Yellow

Wire size: .243
Inside diameter: 3-3/4"
Length: 12 ft

112337.0001.S

Genie Switch Assembly Interlock Expf *** Price by Quote

CBA18B07

Cable Assembly 1/8" 7x19 102" Sold per Pair

Galvanized cable assembly for a 7ft door (102" = 8'6")
Aircraft cable made of 19 wires per strand and 7 strands per cable
Sold as a pair
Same as part number 457

LEVER065

Manaras Brake Lever

10-10882

LiftMaster Chain Guide *** No Longer Available Sold only as a kit

Fits model H operator with Logic 5
This item is now only sold in a kit. To order use code K72-19979

25-42-50

Extension Spring 7' Door - 50 lbs Red

Double - Loop
25" long 42" stretch 50 lb load
Sold individually
Rated for 10000 cycles
Same as part number 105

Spec Sheet

41A2818

LiftMaster Limit Switch Drive Gear Kit

For use with various LiftMaster® and Chamberlain® Residential Garage Door Openers.
Complete replacement kit includes: helical gear e-clip and grease tube

BK000

Residential Top Bracket Adjustable 1-Bolt Sold per Piece

Same as part number 3-31-1
Sold per piece - not a pair

OCDFX4

Overhead Door 4-Btn Transmitter 315/390 Mhz *** No Longer Available

Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
Part Number: OCDFX4.S GIDFX4.S

.283_2"-RH

Torsion Spring .283 x 2" x 12ft RH White

Wire size: .283
Inside diameter: 2"
Length: 12 ft

OCDFX2

Overhead Door 2-Btn Transmitter 315/390 Mhz *** No Longer Available

Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
Part Number: OCDFX2.S GIDFX2.S

Programming instructions Instructions de programmation

25-42-140

Extension Spring 7' Door - 140 lbs Blue

Double - Loop
25" long 42" stretch 140 lb load
Sold individually
Same as part number 114
Rated for 10000 cycles

Spec Sheet

MGH-6235-M-N1-LH

Manaras 1.5 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

MGH-6215-M-N1-LH

Manaras 1.5 HP 240V 1P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

RGH-6214-MON-LH

Manaras 1 HP 240V 1Ph Rapido Gear Head Op. Monitored ECB Left Hand

Rapido version of model OGH
Includes PHOTO-061 Monitored N4X Thru-Beam eyes

OGH-6113-M-N1-RH

Manaras 3/4 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

PRO-HBHW-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N4 Eyes Monitored ECB Left Hand (Pro-HBHW)

3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

PEDALU96

Aluminum Pedestal Post 96"

Pedestal post with hood
High quality aluminum
96 inches tall
Dual face-plate allows for easy wire connections

18009A

Doorlec Reducer 80:1

1-0244

RW Stay Roller 154 Heavy Steel Black Enamel

Heavy Steel Warehouse Stay Roller.
Wheel protected on all sides except door side with heavy steel frame
Wheel: Gray iron. 3-1/2" dia
Frame: Steel. with slotted screw holes for adjustment

K76-37253

LiftMaster Electric Motor 1/8HP 24VDC for RSL12U

Replacement motor with improved brush assembly for RSL12U gate operators

2GW-R

Rolling Steel 2" Stamped Alternate Windlock Right Hand

50184

Doorlec Brake Plate Assembly No Solenoid No Solenoid Cover

Kit includes plate drum and shoes only - No solenoid or solenoid cover

15-50B60LGH

Sprocket 60 Teeth 1" Bore 1/4" Keyway w/SS

60 Tooth Sprocket Kit 1" Bore x 1/4" Keyway (50B60). For use with various LiftMaster® Logic 4.0/5.0 and MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators. Refer to the installation manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

PDC-300-075-1-40/63-20

Pulse 300 Direct Drive Opener 3/4 HP 1" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details