Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Transmitters
MK-00706

Micanan Harness 3-Phase Contactor Board

MK-00036

Micanan Overload Reset 1-Phase 7 Amps

MK-00142

Micanan Transformer 115V-24V-50VA

MK-00024

Micanan Single Limit Switch AT

MW-00020

Micanan Splash Proof Cover Fully Assembled T TB SD

  • Splash proof cover for models: PRO-T/TB
  • Same as MP00251
MK-00931

Micanan Single Btn Mini Transmitter ** Discontinued

MV-00028

Micanan 24V Commercial Receiver NEMA-4 CR32E-24V

TN33C

Wire Nuts (Marrette) Yellow 22-10 AWG 100/Pkg

  • Screw-on wire connector
  • Wire Range: 22-10 AWG
  • Rating: 105C (221F)
  • Voltage: 600V
  • Approval: CSA UL 486C Listed
MV-00238

Micanan Key Switch O/C Tamper Proof w/Best Core Cylinder Nema 1 Flush Mount

MV-00016

Micanan Key Switch O/C Tamper Proof Nema 1 Flush Mount

MV-00236

Micanan Key Switch O/C Tamper Proofw/Best Core Cylinder Nema 4 Surface Mount

MV-00010

Micanan 3-btn O/C/S Nema-4 Pushbutton Control Station

  • Surface mount
  • Metal Housing
111075.0001

Overhead Door Poly VBelt for RSX and RMX Jackshaft/Hoist Commercial Operators

  • Serpentine belt compatible with Overhead Door standard duty RSX and RMX operators.
  • 6-rib poly VBelt
  • 31"
SD105L5-LH

LiftMaster Heavy-Duty Slide Door Operator 1 HP 575V 3PH Left Hand (Must include hardware box)

  • Perfect for split and sliding doors involved with industrial applications.
  • It is installed above the door and corresponds with the direction the door will be traveling.
  • Comes equipped with an emergency disconnect and for manual lifting in an emergency and automatic reconnect.
  • The new logic 5 commercial operators come with MyQ Technology built in. * 828LM required
  • Built In Security+ 2.0 radio receiver
  • Solenoid brake included
    • .......more details
HAML-SHAFT-ADAPTR

GDI Shaft Adaptor 1" w/Sprocket Vertical Mount Application

PRO-J-10081-U-RH

Micanan 1HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
.421-6-R

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Gold

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.243-334-R

Cut-to-Length Torsion Spring .243 x 3-3/4" Right Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
.243-334-L

Cut-to-Length Torsion Spring .243 x 3-3/4" Left Hand Wound White/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
PRO-J-7553-U-RH

Micanan 3/4HP 575V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-J-7553-U-LH

Micanan 3/4HP 575V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-J-7521-U-LH

Micanan 3/4HP 230V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
PRO-J-5053-U-RH

Micanan 1/2HP 575V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-J-5081-U-RH

Micanan 1/2HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-J-5011-U-RH

Micanan 1/2HP 115V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Pro J Manual Specification Sheet
PRO-GT-7553-U

Micanan 3/4HP 575V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-7581-U

Micanan 3/4HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

NUT-14-SS

Nut Stainless Steel 1/4"-20 Flanged Serrated Hex

ALUM-568

Aluminum 24" x 100' Spool Nutmeg / Brun Muscade # 568

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 565
  • Reverse side is #431 Bright White
Colour chart
.406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.406-6-L

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Blue/Yellow

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
PRO-TB-5023-U

Micanan 1/2HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-TB-5083-U

Micanan 1/2HP 208V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #410 roller chain on 1/2 HP models
  • Monitored board
  • On-Board receiver holds up to 20 transmitters
PRO-T-7521-U

Micanan 3/4HP 230V 1P Trolley Operator N1 Eyes Monitored ECB

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PRO-LTB-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

  • Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
  • Trolley track for door up to 12ft standard upcharge for 14' & 16'
  • Door speed 9 inches per second
  • UL325
  • On-Board receiver holds up to 20 transmitters
2806.206.325

Whiting .206 x 2-3/16 x 32-1/2" Roadside with Cones

60-7233

Wheel Chock Tie Back Chain Custom Lengths 3/16" Galvanized Sold by the Foot *** No Longer Available. See 60-7238 as possible replacement

  • Tie back chain only - Sold by the Foot
  • 3/16" Galvanized
60-7248-888XL

Wheel Chock Safety Pkg incl'd: laminated chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) 88-8XL Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Made From Used Truck Tire Laminates Compressed and Fastened Under High Pressure
  • Galvanized Steel Sides
  • Size: 11-1/4" wide x 14" long x 14" high
88-8XL

Wheel Chock 88-8XL Laminated Rubber Galv. Steel Sides

  • Made From Used Truck Tire Laminates Compressed and Fastened Under High Pressure
  • Galvanized Steel Sides
  • Size: 11-1/4" wide x 14" long x 14" high
172845

Disconnect Chain Hoist Wall Mount 4:1 Torque Force

  • Wall mounting
  • 4:1 reduction
  • Maximum pull allowed on hand chain is 35lb
  • Includes (1) 41B36 sprocket with 1” bore 4’ of #41 roller chain 26’ of hand chain (1) chain keeper (2) set screws 5/16"-18 and limit switch
Sell sheet
G50402

LiftMaster Timer Defeat Hold Open Switch 50-12860

  • Allows for the auto-close timer to be manually disabled
RBH503L5-RH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
PRO-GH-20053-PNL

Micanan 2 HP 575V 3P Gearhead Operator NO CONTROLS *** Price on Request

  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Universal Right or Left Hand mount
Installation manualSpecification sheet
31D380

LiftMaster Sprocket Cover

  • Sprocket Cover Replacement Kit for use with various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers
HRB-10

High Riser Bracket for 7" Above Dock or Higher 10"

  • High Riser 10" Riser Bracket for 7" Above Dock Door or Higher
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
SRB-5

Standard Riser Bracket 5" Above Dock

  • Standard 5" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
SRB-4

Standard Riser Bracket 4" Above Dock

  • Standard 4" Riser Bracket for 6" Above Dock Door or Less
  • Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information
Specification Sheet
E/BLOP/150

Automatic Systems Safety Edge for BL229 14'-9" (EABLOP/150)

E/1929/031

Automatic Systems Installation Plate Ass'y BL229

  • Used on the BL229 gate op.
E/1929/070

Automatic Systems Spare Arm 14'-9" (BL229)

  • Used on the BL229 gate op.
MM00015

Micanan Solenoid Lever Gearhead (MSI0031)

MD-00201

Sprocket 50B40 x 1-1/2" 3/8" KW 2SS 5/16"

15480

Doorlec Heater Strip 175 W 575 V

TB-20

Molded Rubber Bumper Black 3 1/2" L x 6" W 3 1/2" Projection 2-Hole Sold Individually

  • Manufactured from reinforced prime rubber
  • Rectangular horizontal mount
  • Molded Truck Bumper molded in one piece and will not warp rust rot or harden.
  • Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
  • 3 1/2" L x 6" W 3 1/2" Projection
MV-00133

Micanan Control Station 3-Btn O/C/S Nema 4 Surface Mount c/w Pilot Light 24V ** DISC..

STRUT-2-1/4-14'-NH

Door Strut 2-1/4" Non Hemmed 14 ft Long ***No Longer Available

  • Reinforcement bar 2-1/4"
  • 20G
LVB1224-11

Laminated Bumper Black 12" Projection Vertical Installation 24" L x 11" W Sold Individually

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB1212-12

Laminated Bumper Standard Black 12" L x 12" W 12" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB1010-24

Laminated Bumper Standard Black 10" x 24" 10" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB410-36SF

Steel Faced Laminated Bumper Black 10" x 36" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
TB410-14SF

Steel Faced Laminated Bumper Black 10" x 14" 5 1/4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
K75-36914

LiftMaster Electrical Box Cover APT T GT SD GSD GH - L5

LB612-14

Laminated Bumper Standard Black 12" x 14" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB412-24

Laminated Bumper Standard Black 12" x 24" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB410-36

Laminated Bumper Standard Black 10" x 36" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
LB410-18

Laminated Bumper Standard Black 10" x 18" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
AC636

Aluminium Threshold AC6 x 36" (3')

65_52091-12

LiftMaster Manual Hoist Mod. M8 #41 Chain for 12ft High Door

  • For 3/4 Hp & 1 Hp Trolley operators
  • Includes floor level brake release cable 1" x 12' round bar.
34054

Doorlec V-belt Pulley Double 2" x 5/8" bore

MD-00246

Double Sprocket 41B14 / 41A32 with 1" Bushing

  • Double sprocket for PRO-H/HB
K10-36183

LiftMaster Battery Tray for 33AH Batteries

  • For use with LA500
MM00008

Micanan Frame GHC MSI0034

LVB620-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
MM-00126

Micanan Wall Mounting Plate (Reducer 80/100)

25-42-260

Extension Spring 7' Door - 260 lbs Brown w/ clip

  • Double - Loop end for strength
  • 25" long 42" stretch 260 lb load
  • Sold individually
  • Rated for 10000 cycles
M3-2314-WHITE

Marantec 4-Button Transmitter Glossy White 315 MHz 122989 *** Price by Quote

  • Visor mount
  • Includes battery CR2032
  • Made in Germany
BINS-BLACK

Utility Bin Heavy-Duty Stackable Black ** NLA

  • Usable in virtually every environment both indoor and outdoor and they are made from Polypropylene which will not fade in the sun
  • Outside dimensions: 16.75" L x 10.75" W x 6.55" H
  • Inside dimensions: 12.15" L x 8.375" W x 6.5" H
  • Sold per bin
LAGS141W

Fasteners Lag Screw Stainless Steel 1/4" x 1" Hex Washer Head 3/8" Sold Individually

VWS-34-BRONZE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box Bronze

  • Pan head
  • S point
BRACKET111

Manaras Hood Mount Angle Bracket

41C5548

LiftMaster Wiring Harness Kit Low Voltage

  • For use with various LiftMaster® and Chamberlain® Garage Door Openers
41C5497

LiftMaster Wiring Harness Kit High Voltage

  • For use with various LiftMaster® and Chamberlain® AC Chain Drive Garage Door Openers; manufactured after 2001
PRO-J-5083-U

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Universal Mount

  • On board receiver with antenna
  • Continuous duty industrial motor with overload protection
  • Heavy duty 5L V-belt
  • Adjustable friction clutch
  • Solenoid brake (optional PRO-JB) recommended for large doors
  • 3/4" permanently lubricated & sealed precision ball bearings on pulley shaft
    • .......more details
Specification Sheet
E/BLOP/122

Automatic Systems Red Arm Light - 2 Sets

  • Increases visibility of the arm on BL229 gate operator
22000

Doorlec Enclosure EEMAC 12 and 4 1 Hole 22MM

  • Works with selector switch #22016 (sold separately)
26CW94523-CUT

Truck Door Intermediate Panel (13" x Cut-to-Size) Painted White for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
PRO-GHCB-30053

Micanan 3 HP 575V 3P Gearhead Operator with Brake No Controls

Installation manualSpecification sheet
5001-16-WHITE

Residential Side & Top Weather-Strip 16' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
5001-10-WHITE

Residential Side & Top Weather-Strip 10' Long - White

  • Painted aluminum retainer with flexible dual fin vinyl.
  • Residential use.
K74-MODELH

LiftMaster Main Wire Harness L3

26CW94323-CUT

Truck Door Bottom Panel with Seal (13" x Cut-To-Size Painted White for Whiting Dryfreight

  • These panels are cut to customer's specifications
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood.
  • Painted white
  • Comes only with bottom retainer and seal (installed)
    • .......more details
HBS23LUD-H

Stainless Steel Low Headroom Bottom Fixture 2-3" Door 2-3" Track Double End Stile Heavy-Duty Sold per Pair

  • Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
  • Laser Cut for a Clean Finish
  • For Low-Headroom Track
  • For 2" or 3" Doors
  • Fits 2" or 3" Track
  • Double End Stile
    • .......more details
HTLS

Stainless Steel Garage Door Low Headroom Top Bracket 12-Gauge Sold per Piece

  • Manufactured with Heavy Duty 12ga. Rust-Resistant 304 Stainless Steel
  • Universal Design.
  • Fits Most Overhead Sectional Doors
  • Use for Low-Headroom Doors Only
  • 5-3/4” tall x 2-1/2” wide
  • Priced Per Each
    • .......more details
19-5112

LiftMaster Trolley Roller Chain Pack #41 for 12ft Door

  • For 3/4 & 1 HP trolley operators
.306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Red

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
MM00020

Micanan Disconnect Arm

PRO-H-7553U-RH

Micanan 3/4HP 575V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

  • Continuous duty belt drive jackshaft operator with emergency chain hoist
  • Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
  • Nema 1 photoeyes included
  • Solenoid brake OPTIONAL
WEL-200-R

EMX Wireless Edge Link Receiver Unit only

Manual
OCDFX4

Overhead Door 4-Btn Transmitter 315/390 Mhz

  • Dual Frequency transmitter that will work on all OHD/Genie brand 315 or 390 rolling code commercial openers including the the RX OHD commercial opener.
  • Part Number: OCDFX4.S GIDFX4.S
KPR2000

LiftMaster Wired Keypad and Proximity Reader

  • The KPR2000 supports a maximum of 2000 users in multiple access configurations (card only 4 to 6 digit PIN only or a combination of card and PIN).
  • Supports HID 26 and 30-bit Wiegand proximity card formats.
  • Designed for outdoor environments with a sealed weather proof design allowing you to easily mount anywhere.
  • Functions as a Stand-Alone Controller or in Pass-Through Mode (Wiegand Keypad Wiegand Proximity Credentials ASCII Keypad).
  • Latch Mode allows you to hold open a door or gate for an extended period of time.
  • Rapid Programming and Block Enrollment capability “Add” and “Delete” program cards included.
    • .......more details
Installation instructionsManuel d'installationSell sheetBrochureWiring instructionsInstructions de cablage