Devanco Canada - Get The Right Garage Door Opener‎ and Parts

27-20301

Truck Door Cable Drum Curbside (RH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-1 T #59129-1 W #4013 330100

H11G09

Hinge #9 x 11 gauge

11 gauge # 9 hinge - 0.90 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G07

Hinge #7 x 11 gauge

11 gauge # 7 hinge - 0.83 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

H11G08

Hinge #8 x 11 gauge

11 gauge #8 hinge - 0.87 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

CBC18

Thimble 1/8" - 100 per pkg

CB3160500

Cable 3/16" 7x19 500' Galvanized

Galvanized cable 3/16" 7x19 500ft spool.
Cable break strength: 4200 lbs

Comparison charts

R5201

Cast Iron Pulley 3"

Bored for 3/8" diameter bolt
Cable diameter: 1/8"
Cast iron pulley mounted on two pressed sealed bearings.
Radial Load: 400lb

25-10300

Truck Door Cable Anchor Bracket Zinc

Steel construction Zinc plated finish
Allows proper rotation of cable head
Cross Reference: T #61204 W #4004 240000

25-10102

Truck Door 2" Steel Roller 3" Shaft for Whiting Roll-Up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #2996 T #70224

6X16PO50

Devanco Loop 6' x 16' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation Instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

WB-400-24V

Audible Warning Device Exterior Surface Mount 24V

6" bell 85 DBA

T-833

FL-Allstar 3-btn 3-Door Transmitter 108817-311 MHz

This three channel transmitter controls up to three doors (open-close) or one door (open-close-stop).
It has a height switches encoder with three positions: + 0 and - .
Manufacturer's model number: 8833T (190-108817)
Dimensions: 4 5/8" x 2 1/4" x 7/8"

Programming Instructions

H11G05

Hinge #5 x 11 gauge

11 gauge # 5 hinge - 0.76 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

.273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GH303L5-RH

LiftMaster Gearhead with Brake 3 HP 208/230/460V 3-Phase Logic 5

Includes CPS-U photoeyes

41A5483-2C

LiftMaster Circuit Board Assembly *** To extent of inventory

Assembly includes: Circuit board and end panel
For chain drive units with one light
Fits models 2245 & 2255
Last letter of the part # indicates revision date the most recent product will be sent out

MV-00001

Micanan Single Button Nema-1 Pushbutton Control Station

Surface mount

2X4PO50

Devanco Loop 2' x 4' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

.250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

1014-1-5/8-16'

Rigid Vinyl Bottom Retainer Notched 16' Long

Black - for door thickness of 1-5/8"

GDI-HB311

GDI Direct Drive & Jackshaft HAML-RBH-2030 Nema 1 To Accept 1-1/4" Shaft UL-325 Photo Eyes Extra

Compact & Light Weight - Fast Installation
Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
Soft start soft stop

.......more details

1104-14FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

41C3196

LiftMaster Antenna for Co-Axial Receiver

Wire antenna kit same as what is supplied in a 312 / 412 HMC

19-5112

LiftMaster Trolley Roller Chain Pack #41 for 12ft Door

For 3/4 & 1 HP trolley operators

.406_5-1/4"-LH

Torsion Spring .406 x 5-1/4" x 12ft LH Blue/Yellow

Wire size: .406
Inside diameter: 5-1/4"
Length: 12 ft

PRO-HBH-7543U-L

Micanan 3/4HP 460V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

3/4 HP460V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

8FT-TROLLEY-SET

LiftMaster 8ft Double Angle Rail Set for Comm. Trolley Ops 10-5808-P (2pcs) *Actual length 131"*

Double Angle Rails for doors up to 8' 6" high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us

.225_2-5/8"-LH

Torsion Spring .225 x 2-5/8" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 2-5/8"
Length: 12 ft

1326-134-BLK-PLEXI

Elton Commercial Window 1-3/4" thick 1326 Black Frame Sealed Plexi Glass

Screw together window kit
Frame size: 26-1/8" x 13-9/16" (Tip to Tip)
Cut-out size: 25-1/16" x 12-9/16"
Vision area: 23-7/16" x 10-13/16" Corner Cut 4" Radius
Different glass options and frame colours are available upon request

SSZP17-1

Solid Shaft 1" Keyed Zinc Plated 17'-1" ** to extent of inventory

MDTK

Linear MegaCode Wireless Keypad 318 MHz *** To extent of Inventory Repl. by LPWKP-G

Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: 9-volt battery included

.......more details

Programming Instructions

Q310

LiftMaster Surge Protection for MIR-1 ( K74-50271) ** DISCONTINUED

For the Miracle-One single arm gate operator
Same as part no. K74-50271

RS1034

Roller 3" Steel 4" stem 10 ball

Steel Roller Wheel diameter: 3"
Working length: 3.38"
Overall length: 4.75"
Box qty: 50 Box weight: 35.8 lbs (3-4-10 Steel)

L-4-18-0-M

Cable Tie Standard 18 LB Black 4" Nylon 1000/pkg

Length: 4.12" / Width: .095" / Thickness: .042" / Diameter: .875"
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening
Rounded edges provide added safety and eliminate insulation damage

.......more details

41A5257-3

LiftMaster Hardware Kit *** No Longer Available

Hardware Replacement Kit. For use with various LiftMaster® Residential Garage Door Openers

.468_6"-LH

Torsion Spring .468 x 6" x 12ft LH Blue/Orange. **NLA

Wire size: .468
Inside diameter: 6"
Length: 12 ft

4011-12FT

Aluminum Retainer only for Light Brush or Vinyl Insert 12' Long 90 degree

For angle application
For use with Light Brush or Vinyl Insert.
For applications that require dual brush or brush and vinyl

7001-10-BROWN

Commercial Side & Top Weather-Strip 10' Long - Brown (DN)

Brown galvanized steel with brown dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 3-3/4"
Length: 12 ft

FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz *** Discontinued

Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
Contains 10 DIP switches inside for coding.
Battery included: 12V (GP23A)
Dimensions: 72 x 15 x 40 mm

LB812-24

Laminated Bumper Standard Black 12" x 24" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

MGH-6213-M-N1-LH

Manaras 3/4 HP 240V 1P Jackshaft Monitored w/N1 Eyes Left Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

OGH-6113-M-N1-LH

Manaras 3/4 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

OGH-6233-M-N1-LH

Manaras 3/4 HP 208V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

OGH-6435-M-N1-LH

Manaras 1-1/2 HP 480V 3Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

OGH-6215-M-N1-RH

Manaras 1-1/2 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

OGH-6234-M-N1-RH

Manaras 1 HP 208V 3Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

OTBH-6214-M-N1

Manaras Trolley Operator 1 HP 240V 1Ph Monitored w/N1 Eyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain
Includes PHOTO-070

.......more details

OSHW-6213-0M00

Manaras Opera-SH w/Carwash Mod 3/4HP 240V 1Ph Mon ECB w/N4 Photoeyes Right Hand

A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

ME120-Y-2WIRE-E

Miller Edge Yellow 2-Wire NM End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

PDC-300-075-1.25-40/75-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

PDC-300-075-1-40/50-20-CH

Pulse 300 Direct Drive Opener 3/4 HP 1" shaft 110/240V 1ph 40:1 20' Cable

Advanced speed control: up to 24"/s opening up to 16"/s closing
Built-in 24V 9Ah battery backup
Soft start/stop functionality
Universal single-phase power compatibility: 110-240V 50/60Hz
Adjustable force monitoring
Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors

.......more details

28001

Doorlec Flange Bearing F-360-13 3/8" (.94cm) Hole

Fits model LJHW

PDC300-CH-OPTION

Pulse300 Chain Hoist Option Only

Added option to a Pulse 300 operator

2200-938

Linear VBelt 28 4L Cogged

CGH155L5-LH

LiftMaster Gearhead with Carwash Mod and Brake 1-1/2 HP 575V 3P L5 - Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

MGHW-6113-0M00

Manaras MGH with Damp Area Mod (Mod081) 3/4 HP 120V Monitored Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
includes damp area modification
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

K41-0479-000

LiftMaster Hoist Assembly JH 700 1200 2200

For Maxum JHDC models only
Replaces previous service kit K41-0465-000

K41-0556-000

LiftMaster TECHNA Cabinet Door Grey

Compatibility: Fits LiftMaster TECHNA barrier gate operators

RGHW-6214-MON-R

Manaras 1 HP 240V 1Ph Rapido Gear Head Carwash Mod Monitored ECB w/Eyes Right Hand

Rapido version of model OGHW
Includes Monitored Waterproof photocells

B/CDJH-34-575-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 575V w/ ECB and Solenoid Brake Right Hand UL325

3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

TXTA-KYPD

Pulse Universal Wireless Keypad

Programmable 4-digit code for continuous use.
Programmable TEMPORARY 4-digit code for programmable number of uses.
Multi-Brand Adaptable: Works with all Pulse receivers LM receivers (GreenOrange Red Purple and Yellow learning codes) and other receivers with 315MHz or 390MHz.
Powered by 9V battery. (One included in package)

C-24X12-134-LEX-W

Thermal Window 24" x 12" for 1-3/4" Door Lexan White *** Special Order by Quote Only

For 1-3/4" thick door
Glass type: Polycarbonate (Lexan)

CLUTCH005

Manaras Friction Clutch 1-3/8" #50 MGH

For MGH 2/3/5HP

OGH-6112-MON-LH

Manaras 1/2 HP 120V 1Ph Gear Head Operator with Monitored ECB Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

026-122

Blue Giant Heater Element **Special Order

Price by Quote Only

JHDC22X4BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 480V 3PH 60 Cycles/Hour 2200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

Auxiliary Modification Dual Auxiliary Trolley Modification MAXUM Manual dinstallation MAXUM Installation Manual MAXUM Fiche Technique MAXUM Data Sheet MAXUM Product Guide MAXUM Buying Guide

K15-50B18QGX

Output Sprocket for SL595 and SL595UL

��This is a replacement Output Sprocket. Compatible with LiftMaster® Model SL595U Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

7909212

FAAC Control Panel Main Circuit Board for FAAC 844

1-0243

RW Stay Roller 153 Galvanized

For use on #31 square track

1-0199

RW Hinge 700 03 x 7 18" (36" Open) Black

Straps: Formed steel 3/8" thick x 2-1/2" wide (basic width)
Pin: 3/4" dia steel Zinc plated. Pin loose with cotter pin
Bearings: 2 hardened steel disc bearings
Finish: Complete hinge black enamel
Fasteners are not included

1634-112-W

Elton Commercial Window for Flush Doors 1-1/2" thick 16x34 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 35-1/8" x 17-1/8"
Cut-out size: 33-7/8" x 15-7/8"
Vision area: 31-3/4" x 13-11/16"
Different glass options and frame colours are available upon request

.......more details

1005-3-18'

Aluminum Bottom Retainer 3" U-Shaped 18' Long

For door thickness 3"

1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
Works with TDC12 & TDC22 Maxum operators

510.3920.07

Whiting Stainless Steel Rivets Option for Dry Freight Door 4-Rows of Hinges 7 Panels

Upgrade option

OPHW-6113-M-N4-R

Manaras Opera-H 3/4HP 120V 1Ph w/Carwash Mod Monitored N4 Eyes RH

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"
Carwash Mod installed Nema 4 eyes supplied

.......more details

DC300-50-1

Dyna-Hoist 300 Series Direct Drive BBU 1/2 HP 110/240V 1" Shaft 40:1 Ratio ** Quote Only

Special-Order. Price by Quote Only
Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
The 300 series also works with and powers 12V automatic lock systems
Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering otherwise 40:1 will be supplied

.......more details

Z9408

Coupler 1" Bore Adjustable Black 170634

Malleable Iron for strength
Set screws and jamb nuts installed
1" bore with 1/4" keyway
Thickness: 0.50"
Painted black

7176.235*34.930

Whiting Heavy Duty Torsion Assembly .235 x 34" shaft 93"

27209

Doorlec Electric Motor TEFC 3HP 208/480/575V 3-Phase DC333C

Frame size is 56C

461-0003-10

Richard-Wilcox #31 Square Track 10ft Length Sold per Piece

Used with #7-6095 rollers
Replacement for #75x14g

E/BLOP/116

Automatic Systems Anti-Corrosion Base

15-50B50LGH

Sprocket 50 Teeth 1" Bore 1/4" Keyway w/SS

Same as 71-1550B50LGH

GALV-343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

D1101KH-C-S-SSV2A

Doorbird Classic IP Video Door Station Stainless Steel Surface-Mount

Video intercom including surface mounting housing
Keypad Module: Configurable via App Up to 500 individual PIN codes Individual events (e.g. trigger a relay HTTP(s) request)
LAN connection (PoE compatible)
2-Way audio
Ultra-wide angle lens HD video 1080P night vision IR LEDs
4D motion sensor

.......more details

Installation Manual - DH11 Series

JHDC12S4BMC

LiftMaster MAXUM Jackshaft 3/4HP 480V 3PH DC Operator 30 Cycles/Hour 1200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

GAREX-24X12-GLASS

Garex Thermo Window Clear 24" x 12" Glass Only

An original Garex glass No frame

H11G06-SS

Hinge #6 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H11G04-SS

Hinge #4 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

WHITING-COLDSVR

Whiting Cold Saver Panel Special Order- Made to Measure Quote Only

Special Order Sold by Quote Only

GALV-306-6-144-R

Torsion Spring .306 x 6" x 12ft RH Galvanized Red

Wire size: .306
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

K41-0243-000

LiftMaster Output Sprocket IHSL24UL

Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators

IP-MONB

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System in Black

Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in black.
IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
Also available in white: IP-MON
SIP Server
Operating temperature: -10C to 55C
Call recording and built-in memory

.......more details

OTBH-6212-AM05

Manaras Trolley Operator 1/2 HP 240V 1Ph Monitored Board w/Eyes Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)

.......more details

BCSI-PM17

Pivin Drapeau Secondary Shaft *** Price by Quote Only

OGH-6535-M-N1-LH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details