Devanco Canada - Get The Right Garage Door Opener‎ and Parts

TDC1222-20

Liftmaster Comm. 20FT Trolley Angle set (10-5820-P x 2) and #41 chain pack (TDC41-20) and spacer pad (71-10324***Actual length 275"***

Double Angle Rails for doors up to 20'6" high
Includes #41 chain pack and Spacer pad part # 71-10324

26004A.S

Genie Bolt Retainer

The bolt retainer is used with the bolt that secures the pulley bracket to the pulley support

510.5423.00

Whiting Side Seal Upgrade for DF Door OLD 5423

Upgrade when purchased with a complete door

OSHW-6113-0M00

Manaras Opera-SH w/Carwash Mod 3/4HP 120V 1Ph Mon ECB w/N4 Photoeyes Right Hand

A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

7DUALTROLLEY20

LiftMaster Dual Trolley Mod TDC 7 to 20ft **TDC48-20 CHAIN PACK #48 20 FT RAILS x 111-5220 CRSBARROUND1" X 20' x 110-5820-P TRACKTROLLEYFOR 20FT DOORPRE-PUNCHED x 2DUALTROLLEYMOD48 MOD-KITDUAL TROLLEY48 CHN x 1

Includes: TDC48-20 CHAIN PACK #48 20 FT RAILS x 1 11-5220 CRSBARROUND1" X 20' x 1 10-5820-P TRACKTROLLEYFOR 20FT DOORPRE-PUNCHED x 2 DUALTROLLEYMOD48 MOD-KITDUAL TROLLEY48 CHN x 1

Z9962

L5 Operator Mounting Bracket

Compatible with L5 Jackshaft operators
Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
Precise chain tension adjustments through the adjustment bolt
Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation

.......more details

26130

Doorlec Hoist Shaft Threaded 5/8" x 12" GH/GHX

Works on GH/GHX

TXTA-200

Pulse 3-BTN Transmitter 315MHZ

Three-Button Transmitter: Can be programmed to operate with up to three different receivers to operate up to three doors or for Open Close and/or Stop functions
315mHz: Works with RXTA-100 and RXTA-200 or as replacement unit for other LM receivers with 315MHz frequency.
Provided with visor clip for forklifts and trucks.
FCC Approved

CAPXLV2MC

LiftMaster Smart Video Intercom - L

Designed for High-Rise Buildings and Gated Communities
For 50 to 50000 units multi-family buildings and garden style communities.
Perfect for any entrance and beyond with 4 Wiegand Input 4 OSDP Readers and 8 Relay Output to control doors gates or any other relay-controlled electrical system.
10” HD touchscreen display fits in a surface flush or pedestal mount.
Wi-Fi** or ethernet for easier installation and connection to Cloud. 3rd party cellular modem can be used as well.
Wireless link to LiftMaster gate operators to eliminate the need for digging trenches at the gate.

.......more details

CLUTCH005

Manaras Friction Clutch 1-3/8" #50 MGH

For MGH 2/3/5HP

HTR120NC

LiftMaster Heater Kit for Maxum

Allows for operation in extreme cold environments effective for ambient temperatures down to -31°F (-35°C)
120volt input power. standard 120V outlet required
Can be added easily in the field
Not for damp/wet environments

GRX-40X13-134-WTE

Thermal Window Clear 40" x 13" for 1-3/4" Garex Door White Frame

For 1-3/4" thick door

WRAES

Erone Raduim 2-in-1 AES128 Wireless Receiver 433MHz

The WRAES is a 2-in-1 AES128 encryption receiver.
It works either in stand-alone or connected to an access control system (Wiegand output).
Compatible with any high-security AES128 RADIUM wireless remotes it was designed to prevent remote cloning.
The code sent by the transmitter changes at each activation removing any scanning and copying risk.
A special algorithm ensures a continuous synchronization between the receiver and remotes.
Stand-alone mode: 500 transmitters

.......more details

R2AES

Erone Radium 2-Button AES128 Encrypted Transmitter

Compatible with any high-security AES128 wireless receivers they were designed to prevent the cloning of remotes.
The code sent by the transmitter changes at each activation removing any scanning and copying risk.
A special algorithm ensures a continuous synchronization between the receiver and remote.
Includes AES128 encryption
Compatible with RADIUM AES128 receivers
Heavy-duty construction

.......more details

GALV-331-6-L

Cut-to-Length Torsion Spring .331 x 6" Left Hand Wound Galvanized Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-600-INSTALLED
For spring filler use part no. SPRING-FILLER
Galvanized

GALV-331-6-144-R

Torsion Spring .331 x 6" x 12ft RH Galvanized Red/White

Wire size: .331
Inside diameter: 6"
Length: 12 ft
Galvanized

2806.182*290

Whiting Spring Assby .182 x 2-3/16 x 29" Roadside

Replacement torsion spring with cones
Specs: .1182 x 2-3/16" x 29" Long
Roadside
For Curbside order part # 2807.182*290

10PBS61

Push Plate 6"" Square Text+Logo Stainless STL .093 Thru Holes

1/16" thick stainless steel for maximum durability
Single- pole 1 A COM/NO/NC UL recognized
Compatible frequencies: 900 433 or 300MHz
Includes mounting hardwaare flag connectors and hex key

7-6093

RW Bottom Cane Bolt 524 x 2 Zinc Plated

Zinc plated

7-6093BL

RW Bottom Cane Bolt 524 x 2 Black

Black plated

7-6134

RW Top Spring Bolt 514 x 3 1-1/4" sq x 9" Long

Bolt: Bevelled steel
Chain: Zinc plated 70" long with ring
Black Enamel finish

2200-936

Linear VBelt 25 4L Cogged

PRO-HBH-7553U-R

Micanan 3/4HP 575V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP575V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

K15-50B18QGX

Output Sprocket for SL595 and SL595UL

��This is a replacement Output Sprocket. Compatible with LiftMaster® Model SL595U Slide Gate Operators. Check the manual or replacement parts diagram for specific part information before ordering to ensure compatibility.

MX001100

HySecurity Crankshaft w/Crank Bearing Zerk for StrongArm

Compatible with StrongArm systems
Includes crank pin bearing and zerk fitting
Two key stock for secure arm mounting
Supports smooth and efficient gate operation

K07-2706

LiftMaster Arm Hub

Also known as: 072706 07-2706 07-2706-1 G072706
For use with various LiftMaster® SW420 Series Swing Gate Operators

111-0362

RW Box Track #333 10ft

For doors up to 1000 lbs
10 ga steel

02-401M

LiftMaster 1-Button Control Station

For use with various LiftMaster® Logic 4.0/5.0 and MAXUM Series Commercial Door Operator Applications
Sends the door to the full open position. Perfect for time sensitive situations.

2100-917-UPS

Linear Shaft Output 1" HSLG UPS

31120-112-3/8

Doorlec Sprocket 50B36 1-1/2" Bore 3/8" KW

36 tooth sprocket

26142

Doorlec Cam Shaft Threaded 5/8" x 7-1/4" w/Sprocket GHX

Explosion Proof rotary shaft 1.59cm x 18.4cm

RB-G-K10C

Miller Edge RBand Monitored Wireless Gate Edge System

RBand Gate Edge Transmitter/Receiver System
The system is intended to provide a wireless connection between a monitored sensing edge and a motorized operator that controls the associated gate
The RBand Receiver is compatible with up to 3 RBand Transmitters on 2 channels; 6 total transmitters.
RBand meets the 2016 UL 325 requirements for monitored devices and has been certified as a UL 325 Recognized Component.
It is designed for use with operators that comply with 2016 UL 325 using a Miller Edge 10K Sensing Edge.

1634-112-W

Elton Commercial Window for Flush Doors 1-1/2" thick 16x34 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 35-1/8" x 17-1/8"
Cut-out size: 33-7/8" x 15-7/8"
Vision area: 31-3/4" x 13-11/16"
Different glass options and frame colours are available upon request

.......more details

841LM-NOBOX

LiftMaster Automatic Garage Door Lock No Box Connector with 3 pins

Automatic operation performs in tandem with the opener so it always locks and unlocks.
Anywhere assurance smartphone monitoring with the MyQ® App means homeowners always know that the garage is secure
Absolute protection the automatic deadbolt lock makes the garage door virtually impenetrable
Comes included with 8500W
Works on models 8550WLB 8360W 8587W & WLED
same as Part # 001D8875

.......more details

TDC48-12

LiftMaster Trolley Chain Pack #48 700LBS 12ft Door

Chain pack only
TDC48-12 is a #48 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 12' commercial doors.

.171-2-3/16-72-RH

Spring Wire .171 x 2-3/16 x 72" RHW Galvanized

HW-BRG-1

Lynx Bearing 1" x 2" OD

2 in total on a MCJH

1222_DUAL_TROLLEY_12'

LiftMaster Dual Trolley kit for 12' high door includes #41 Chain for 12ft High Door Angle tracks (2x) 12' and (1x) shaft

Provides a second drawbar-type operation on wide standard door
Includes 12ft tracks #41 chain hardware & Round Bar 1" x 20'
Works with TDC12 & TDC22 Maxum operators

2806.177*340

Whiting Spring Assby .177 x 2-3/16 x 34" Roadside

Replacement torsion spring with cones
Specs: .171 x 2-3/16" x 34" Long
Roadside
For Curbside order part # 2807.177*340

K10-10371

LiftMaster Straight Door Arm

Also known as: 105368 10-10371
For use with various LiftMaster® Commercial Door Operators; manufactured prior to 2005 only

2500-1495

Linear Pushbutton Stop/Reset

MSJ-6534-M-N1-RH

Manaras MSJ 1 HP 600V 3Ph Monitored Board w/N1 Eyes Right Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
35 cycles per day > 150 cycles per day

.......more details

K41-0095-000

LiftMaster DC Motor Drive HD Gate

This service kit is compatible with the following models: HDSL24UL & HDSW24UL

801-300-002-01-REFURB

Refurbished 801-300-002-01 Unit

DC300-CABLE-P/FT

Dyna-Hoist 5-Conductor Cable Sold per Foot Increments of 5ft- Max 25ft

Sold in increments of 5ft to a max of 25ft

DC300-75-1-WP

Dyna-Hoist 300 Series Direct Drive BBU 3/4 HP 110/240V 1" Shaft 20' Lead Weather-Resistant ** Quote Only

Special-Order. Price by Quote Only
Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
The 300 series also works with and powers 12V automatic lock systems
Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering

.......more details

51-013611

Blue Giant Sensor Wand Flat 21 inch **Special Order

Price by Quote Only

C12

Felco C9 Cable Cutter 3/8" Capacity

The FELCO C12 a two-hand wire and cable cutter designed for precision.
Made with unbreakable forged aluminum handles and high-quality hardened steel blades
The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
Length: 19.69 in
Weight: 3.75 lb
Cutting diameter: 0.47 in

.......more details

E/1929/236

Automatic Systems Rod Assbly w/2 Rod Ends (BL229)

Used on the BL229 gate op.

CP-SP-ARM-REL

Lynx Barlock Spring

BL229-L-SPP-5M

Automatic Systems Round Arm Left Sol 1 16'5" (5m)

Highly configurable barrier designed for many applications and environments
Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
C/W BL229 Left Sol1 Round Arm 16'5 Safety Edge Red Arm Lights (2 sets of lights)

TS-1-255-GALV-KEY

Tube Shaft 1" x 255 (21'.25) Galv w/KW 1/4" x 3/8"

When ordering order one foot longer that actual door width
Comes with 3 keys 1/4-3/8-3'' long

425-0090

RW Hanger 70 Flush Pull Steel Sold Individually

Formed Steel construction
Face: 7" H x 4-1/2" W
Pocket: 4-1/2"H x 1-3/8"W x 1-1/4"D

5-36-2

2" Vertical Track 14-GA 7'-3" (8' door) Sold per Pair

31226

Doorlec Sprocket 41B48-1" shaft

36310

Doorlec Flicker Relay OFF/ON 120V AC

RCB-DCB3-PRO

Pro Cut Handheld Chain Break #50 Chain Max Version 3

Adjustable chain holder accommodates #65 chain up to #50 chain
Quickly and easily handle chain rivet removal saving you time and effort
Includes two replacement pins inside the handle chamber

TM1-PLUS

Programmable Timer 1 Sec - 4 Hrs 12/24V DC

6 modes of operation : Delay on operate Delay on release Latching #1 Latching #2 Pulsing #1 Pulsing #2
Adjustable from 1 second to 4 hours with programmable dip switches LED status indicates when timer function is active
Microprocessor based / controlled clock for accuracy of 2%
Operates on a power supply of 12vdc or 24vdc
SPDT relay output : 5 amp 24vdc contacts

GALV-343-6-R

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

10TD900INDHH2

BEA 2-Button Digital Transmitter Nema 4 900 MHz

Compact transmitter allowing wireless activation of any door control providing greater line-of-sight distance than legacy wireless frequencies.
It also provides better penetration of obstacles.
IP65
Operating temperature: -10 to 55C
Controls one 10RD900 receiver

GAREX-24X12-BLK

Garex Thermo Window Clear 24" x 12" Black Frame

An original Garex window
Fits 1-3/4" thick door R16

H11G05-SS

Hinge #5 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

GALV-306-6-R

Cut-to-Length Torsion Spring .306 x 6" Right Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-6-INSTALLED

HAWK2

EMX Microwave Motion Sensor Wide Coverage 5410-2 *** DISC

Advanced K-band planar microwave technology
Easy installation and adjustment
Wall or ceiling installation
Directional sensitivity: toward away or both
High coverage area resolution
Installation height up to 20 feet (6 meters)

.......more details

IP-MONSQ

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System (Square)

Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in white.
IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
Square shape (available in rectangular shape: IP-MON)
SIP Server
Operating temperature: -10C to 55C
Call recording and built-in memory

.......more details

IP-MON

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System

Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in white.
IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
Rectangular shape (available in square shape: IP-MONSQ)
SIP Server
Operating temperature: -10C to 55C
Call recording and built-in memory

.......more details

OTBH-6212-AM05

Manaras Trolley Operator 1/2 HP 240V 1Ph Monitored Board w/Eyes Apt. Model

The Silencio model is a low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
#41 full roller chain
Includes monitored N4X eyes (PHOTO 061)

.......more details

BCSI-PM02

Pivin Drapeau Bearing 1" FL205 *** Price by Quote Only

10-LHB

BEA LZR Housing Bracket

��Housing bracket for the LZR-H100 sensor

B/CDJH-34-115-UL

Lynx CDJH Heavy-Duty Jackshaft 3/4 HP 115V w/ ECB and Solenoid Brake Right Hand UL325

3 Button station (NEMA 1) Photoeyes 1-Btn Transmitter
1650 RPM high starting torque motor with overload protection
Inherent Mechanical Brake (I.M.B)
B2 Mode C2 Mode D1 Mode E2 Mode T Mode TS Mode
On board Open Close & Stop for ease of setting limits
Pre-wired to accept sensing devices

.......more details

20102

Doorlec Reversing Arm Spring

SHAKER-R16

Garex Ready to Install Door Special Order

Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)
Panel Height: 18 21 and 24 inches (45 53 and 60 cm)
Panel Width: Up to 24 feet (732 m)
Texture: Woodgrain
Offered in various choices of colours

MGH-6534-M-N1-RH

Manaras 1 HP 600V 3P Jackshaft Monitored w/N1 Eyes Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

CLM125-HC

Linear Custom Credential Clamshell Card HID 125kHz Proximity Support 25 pk

Made of sturdy ABS plastic Off White
Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
Contactless: up to 8" read range
Supports printable 14 mil CR80 adhesive-back PVC cards
Sold in lots of 25
Same as: 830-00420

.......more details

CDJH-12-115-CONT

Lynx CDJH Heavy-Duty Jackshaft 1/2 HP 115V Contactor Model

Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch Inherent Mechanical Brake included
Solenoid brake optional **
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).

.......more details

SPR50B54X1

Sprocket 50B54 for a 1" Shaft

GALV-331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Galvanized Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED
Galvanized

GALV-283-258-L

Cut-to-Length Torsion Spring .283 x 2-5/8" Left Hand Wound Galvanized White Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

GALV-250-258-R

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

GALV-250-258-L

Cut-to-Length Torsion Spring .250 x 2-5/8" Left Hand Wound Galvanized Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

CPT215-END-KIT-T3

Miller Edge End Kit for CPT215 Doide Capacitor (T3) Configuration

Kit contains: 2) Caps (2) cages (1) wired plug (1) diode capacitor plug (1) non-mon. plug (2) screws

GALV-273-334-L

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-334-INSTALLED

Q061

LiftMaster Cludge Arm Clamp and Handle K75-50121

Compatible with various LiftMaster® Swing Gate Perimeter Access Systems

LZR-H100

BEA LZR Gold-Black BLK-02 H100

Laser scanner for gate and barrier applications.
Provides four laser-based curtains offering a three dimensional detection zone.
Detection curtains are highly configurable and can be set up for activation and presence detection in vehicle sensing applications.
Effective alternative to induction loops.
Max detection range: 32'x32'
Cable length: 33'

.......more details

LZR-H100 User Guide (EN)LZR-H100 Cut Sheet (EN)LZR-H100 User Guide (FR)LZR-H100 Cut Sheet (FR)

2110-700

Linear Idler Assy Large Gate

K41-0381-000

LiftMaster Toroidal Transformer 700lb / 120VAC-240VAC

For Maxum ops

K41-0391-000

LiftMaster EMI Board 1200 (120VAC/240VAC) for Maxum Operators

For Maxum op

CP-PU-AWNING-1

Lynx Awning Pulley 1" MCJH

19-40010-SS

LiftMaster Roller Chain #40 Stainless Steel 10ft/pk

10ft length

CP-MO-34R-123/1

Lynx Electric Motor 3/4 HP-IR 115/230V 1 Ph

Electric motor only with instant reverse

GALV-393-6-144-L

Torsion Spring .393 x 6" x 12ft LH Galvanized Orange

Wire size: .393
Inside diameter: 6"
Length: 12 ft
Galvanized Stenciled

MOD050N2

Manaras Friction Clutch Mod. #50 Chain 1-1/4 RGH

Installed directly on the output shaft of the operator.
Provides added protection by causing the clutch to slip when the door systems requires adnormal torque to be operated.
Includes sprocket for #50 chain
Operator mounting side must be specified
A spreader bar cannot be used in conjunction with this modification
This modification applies to RGH ops

.......more details