Devanco Canada - Get The Right Garage Door Opener‎ and Parts

G-21X13-134-BLK

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door Black

For 1-3/4" thick door

41A7618

LiftMaster End Panel with Battery Cover and Light Socket 8550W

K10-10166

LiftMaster Clutch Plate

Also known as: 1010166 10-10166 142A122 AB112-00230 1090371 142C131 10-9037-1 G1090371 0890371 G1010166 112-00230

2376.177*26.960

Whiting Torsion assembly .177 wire size 26" spring length 96" shaft

M15A

Safety Inertia Brake 2" Bore 13727 Torque PCM15AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 2" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

Manual Technical data Sell sheet

SELECTOR-BTN-8L5

Devanco replacement rotating black button for 8L5-OCS

replacement black button but for rotating 8 position selector for 8L5-OCS

SPGAP06400A

NICE Replacement Nylon Insert Kit

12576

Doorlec Clutch Disc Fiber 4" dia.x 1" bore

Fits model ETBHW/ETHW

SF175-W

Spring Fitting 1-3/4" Winding Side Only 1" shaft

41A3011

LiftMaster Pulley Only for Cable Pulley Bracket

Also known as: 144A12 144B16

DOC-6000

Atlas Door Operator Board

The Atlas board has been discontinued the Lynx 6000 is a direct replaceement

HW0427-LH

SteelCraft Commercial Bottom Bracket Left Hand Only

Left Hand bracket only
Can be used for both 2" and 3" tracks
To be used on door tracks that are installed wide enough to accomodate the side cable pulley
Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
Adjustable cable can level door from the ground
Heavy gauge steel construction

.......more details

ST101-BTM-WHITE

Lynx Bottom Panel White 10x24

Includes bottom PVC

ST101-INT-WHITE

Lynx Intermediate Panel White 10x24

SS-STRUT-16

Strut Stainless Steel 2-1/2" x 16ft 16-Ga

19-4071

LiftMaster Chain #40x71 No Master Link

#40 x 71 pitch no master link
Same as G194071
Compatible with LiftMaster Model SL595GL Slide Gate Operators.

729014

FAAC Manual Release Dial

WHITING-PW

Whiting White Urethane Topcoat Option Dry Freight Door Panel

This is an option when ordering a panel

SL595101UL

LiftMaster Dual Voltage Slide Gate Op.1 HP 115/208/230V 1 Phase - Heater NOT Incl. Reflective photocell LMRRUL included****NLA

Power: 115/208/230 VAC. Single Phase.
Accessory power: 24VAC 500mA max.
Monitored safety inputs: 3 Main Board 3 Expansion Board.
Temperature specs: Without Heater: -4°F (-20°C) to 140°F (60°C). With optional heater (HTRNB: HTR460 for 460V operators): -40°F (-40°C) to 140°F (60°C)
Gate travel speed: 12 in. per second.
Security+2.0® on-board radio receiver: Up to 50 remote controls (unlimited with 811LM/813LM).

.......more details

Installation manual Manuel d'installation First step for installation Première étape pour l'installation Sell sheet Wiring diagram Wiring diagram 575V

14-1014

PVC Roll 8" x .072 Standard Clear Ribbed 150' for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.
Ribbed grade – for greater abrasion resistance and longer lasting clarity

31104

Doorlec Sprocket 41B23-5/8"

MP-00010-U

Micanan Auxiliary Limit Switch for Monitored ECB

Installed to control auxiliary device

31103

Doorlec Sprocket 41B36. KW/SS 1"

K75-50932

LiftMaster Crank Housing Kit - Hand Crank Not Incl. **DISCONTINUED

SL3000 new style hand crank pocket to store hand crank (crank sold separately)

Q028

LiftMaster Manual Crank for SL3000 (K07-50303) **DISCONTINUED

Hand crank for SL3000

AM-PC

Linear Proximity Cards - Linear Format ACP00739 25/Pkg

The Model AM-PC Proximity Card is a Wiegand format proximity type access control card with a slot for attaching to a key ring use with AM-PR proximity reader.
Passive operation
Low-cost
Durable
25 piece bulk pack minimum order
Dimensions: 3.4" L x 1.9" W x 0.13" Thick

.......more details

MP-00072

Micanan Jackshaft with Auxiliary Trolley Assembly 14' High Door #41 Drive Chain

Provides an auxiliary trolley assembly where otherwise a jackshaft operator may be preferred
Operator must be supplied with reversed limits
For models: PRO-J H HHD GH GHC

FEP100N

Pneumatic Safety Edge End Caps Included Sold by the Foot

Must specify if L-retainer is required

WASHER014

Manaras Type A Plain Washer 5/8

K20-3200C-4TP

LiftMaster Electric Motor 1-1/2 HP 230/460V 3PH CF TEFC

Also known as: K20-3200C-4TP 20-3150C-4T K20-3200C4T 20-3200C-4T

510.2996.07

Whiting Steel Roller Upgrade Option for 7 Panel DF Door

Upgrade option only - must accompany a door order

LIMIT017

Manaras Micro Limit Switch SPDT

CAP001 sold separately

PRO-APTC-5053-U

Micanan 1/2HP 575V 3P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

PRO-APTC-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

K94-37848-1

LiftMaster Electric Motor 1HP

Replacement motor for SL595101U

26CW945215-CUT

Truck Door Intermediate Panel (11.5" x Cut-to-Size ) Painted White for Whiting Dryfreight

These panels are cut to customer's exact measurements.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood.
Painted white

IRB-TX

EMX Industries Transmitter Board Only for IRB-4X *** NLA

MODKIT003

Manaras Time Delay Kit 1.5 Sec For Contactor Models

MODKIT003 for field upgrades
Order MOD003 when ordered in conjunction with a commercial operator

K001D7121-1

LiftMaster Main Board EL1SS

Replacement board only

2500-562

Linear Tokens for Token Acceptor 1000/pkg

Token only

KNX-2

Fire Access Station with Switch

Fire access station with contact on microswitch
Closes when padlock (not included) is removed

.235-3.25-11.5-LHW

Mini Storage Spring .235 x 3.25" x 11.5" long Left Hand

PRO-4X_MOD_5HP

Micanan Nema 4X Modification 5HP

This modification provides a washdown motor N-4X corrosion proof stainless steel control box enclosure waterproof drive and limit chain and a corrosion proof three-button station.
For options M & U Micanan N-4X photocells are supplied
For 5HP motors

.437-6-L-C

Cut-to-Length Torsion Spring .437 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.421-514-R-C

Cut-to-Length Torsion Spring .421 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.406-6-L-C

Cut-to-Length Torsion Spring .406 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.393-6-R-C

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

SG-13-NO

Telco Light Curtain with Rectifier Normally Open 72" (13-193-028-D1-E-H58-5) ***No Longer Available

Normally Open
SGR13-193-028-D1-E-HS8-5
SGT13-193-028-D1-E-01-15
1928mm housing 1800mm active height 28 channels NO relay output 15m cable

Specification sheet Wiring diagram

.375-6-L-C

Cut-to-Length Torsion Spring .375 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.375-334-R-C

Cut-to-Length Torsion Spring .375 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.363-6-R-C

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.375-514-L-C

Cut-to-Length Torsion Spring .375 x 5 1/4" Left Hand Wound. Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.363-334-L-C

Cut-to-Length Torsion Spring .362 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

.343-6-R-C

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.343-258-R-C

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.319-334-L-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-375-Installed

.319-258-R-C

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-258-Installed

.312-334-R-C

Cut-to-Length Torsion Spring .312 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.306-334-L-C

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.306-258-R-C

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-258-INSTALLED

.283-134-R-C

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.273-334-L-C

Cut-to-Length Torsion Spring .273 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.273-258-L-C

Cut-to-Length Torsion Spring .273 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.273-2-R-C

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.273-2-L-C

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.273-134-L-C

Cut-to-Length Torsion Spring .273 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.262-258-L-C

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.262-258-R-C

Cut-to-Length Torsion Spring .262 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.262-134-L-C

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.250-134-R-C

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.243-258-R-C

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.243-2-R-C

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.243-134-R-C

Cut-to-Length Torsion Spring .243 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.234-258-R-C

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.234-134-L-C

Cut-to-Length Torsion Spring .234 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.225-258-L-C

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

08-9098

LiftMaster Angle Mount Bracket Mounting Clip

LMRT

LiftMaster Remote Test Plate

MOTOR273

Manaras Electric Motor 3/4HP 208/480V 3Ph

Continuous-duty base mount ODP 60Hz
This item is compatible with BRAKE011

SPRING043

Manaras Compression Spring

Used on OSH OPH waterproof with brake

PRO-H-7583-U-RH

Micanan 3/4HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL