Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.319-6-RH

Cut-to-Length Torsion Spring .319 x 6" Right Hand Blue/Green

Spring wire only. Cones and Filler extra

5001-WG-12-MOAK

Residential Side & Top Weather-Strip 12' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

5001-WG-9-MOAK

Residential Side & Top Weather-Strip 9' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

1104-12FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-10FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 10' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

750

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#3PT) 1000/Box ** Indef. delivery

Indented Hex Washer Head
7/16" Head
Max RPM = 2000
#3 point = long cutting edge (less thread)

201-300-401-00

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz Pre-2016

Open/Close/Stop remote for 8 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Old generation- prior to 2016

Programming Instructions Instructions de programmation

IRB-RX

EMX Industries Receiver Board Only for IRB-4X *** No Longer Available

28002

Doorlec Flange Bearing F-360-13 5/8" (1.59cm) Hole

Fits model LJH/W

CS303-FP-100

EMX Car Sense Direct Burial Sensor Flat Pack 100ft *** Replaced by LRS-FP-100

Lead probe ONLY. Requires the CS303-C-1 detector.
Easy installation above or below ground
Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Sensitivity display
Single cut installation with flat pack model

2704.192_340

Whiting Roadside Torsion Spring 2-3/16" ID 34" Long

Torsion spring wire only
.192 wire size

MK-00042

Micanan Overload Reset 1-Phase 13 Amps

029-98290-PRIMR

W-Style Replacement Door Primer Only Stainless Steel Package 029-98290

Replacement door size between 96-1/4" - 98" wide x 72-90" high
Primer only
Stainless steel package

C20-32F

Bearing 1-1/4" x 2" Press Fit C20-32F+GR 400 LBS

Stamped bearing for lighter loads
For a heavier duty machined bearing use R5114

5-30-6

3" Vertical Track 12-GA 11'-4" (12' door) Sold per Pair

Pierced track

EC002-277

Automatic Systems Spring Assembly 06/04 for BL27

French description: Ensemble ressort 06/04
For model BL27 gate operator

28020004-500

Cable Stainless 1/16" 1x19 500' Inox *** Price on Request

Not for use in aircraft applications
1x19 contruction type 302 / 304

Comparison charts

HBS2UD

Stainless Steel Bottom Fixture 1-5/8"-2" Door 2-3" Track Double End Stile Sold per Pair *Includes (1) Right and (1) Left Bracket (4) U-Brackets) (2) Clevis Pins (2) Cotter Pins*

Manufactured with Heavy Duty 12 ga. Rust-Proof 304 Stainless Steel
Laser Cut for a Clean Finish
For 1-5/8"-2" Doors
Fits 2" or 3" Track
Double End Stile
Pins and Cotters

.......more details

ME123-M-YEL-RH

Miller Edge Yellow RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

LDM-1

Long Distance Module

Compatible with all door and gate operators that use 24V AC
20 mile range

2B735

LiftMaster Main Board EL25 (041B0735)

Same as 041B0735

9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

MCT-1

Linear 1-btn MegaCode Visor Transmitter 318 MHz ** To Extent of Inventory

Activates one 318MHz MegaCode receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery incl.
Codes: 1000000+ (MegaCode format)
Dimensions: 2.16" W x 3.75" H x .95" D

.......more details

1003-3-DF-200FT

Bottom U-Rubber 3" Dual Fin Black 200' Long

200ft spool of vinyl insert.
Dual fin

PVD-ARM-ALUM-16

Aluminum Gate Arm 16' 1" x 3.5" with Reflective Band

Q400E-HCT

LiftMaster Control Board HCT

Replaced Q400D-HCT

SPRING027

Manaras Spring for Floor Level Disconnect Lever

spring for DISCONNECT001

CONTACTOR041

Reversing Contactor 1 Ph-9A-24VAC

.437-6-R

Cut-to-Length Torsion Spring .437 x 6" Right Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

K20-1050C-2T

LiftMaster Electric Motor 1/2 HP 230V 1 ph CF

For gate op. SL580-5011

65_52091-14

LiftMaster Manual Hoist Mod. M8 #41 Chain for 14ft High Door

For 3/4 Hp & 1 Hp Trolley operators
Includes floor level brake release cable 1" x 12' round bar.

Installation Manual

11202

Doorlec Cap Screw 1/4"-20 x 4"

K72-34818

LiftMaster Limit Shaft Kit SL575/585

Complete with: Limit Shaft Limit Nuts Limit Bearings Limit Sprocket Shim Washers Compression Ring Roll Pin and E-Ring.

MGS20-B-2U-04

Miller Edge Sensing Edge Square Black 2-Wire Universal Outlet 4ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

MGS20-Y-2U-05

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 5ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

PRO-HBH-7523U-L

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
304L rust-resistant stainless steel
12 gauge

102079

Flangette Retainer football style 2 pieces 2 hole PFL6Z PFL206

2 required per bearing # 101475
works with: 1-1/4" bore sealed insert bearing part # SB206-20

REDUCER025

Manaras Reducer 45:1

41A7920-1

LiftMaster Hardware Kit

37561R

Genie Belt and Bullet Assembly 7ft

For 7' Tall Doors Only
Fits the following models: IntelliG 1000 (3024) IntelliG 1200 (4024)
SilentMax 1000 (3042) SilentMax 1200 (4042)

CONTACTOR003

Manaras Repl. Kit Reversing Contactor Allen Bradley 16A-24VAC

Drawing

K20-5150LD

LiftMaster Electric Motor 1/2HP 120V MT/MH Motor

K20-1050B-2LP-H24

LiftMaster Electric Motor 1/2 HP 115V 1Ph Logic 3 Logic 4 Logic 5

Standard 1/2 hp motor for new L5 operators

K72-33192

LiftMaster Limit Shaft Kit NEMA 4 & 4X for H J HJ GH GT T & APT Operators

For: NEMA 4 & 4X for H J HJ GH GT T & APT Operators
Shaft measures 12" in length
Compatible with Logic 4 and Logic 5 operators

8086.225.310

Whiting .225 x 2-5/8 IN x 31" Roadside with Cones

An original Whiting assembly

MC00012

Micanan Gear Reducer PRO-GOHD BHC 63 40:1 56C

ST-ENDCAP

Soft Touch End Caps Sold Individually

CP-BRG-1

Lynx Bearing 1" *** Replaced by HW-BRG-1

2 in total on a MCJH

K72-33873

LiftMaster Output Shaft Kit MT / BMT

Complete kit includes output shaft bearings sprockets chain roll pin and turac

VBELT_5L340

VBelt 5L 34" B31

Fits Lynx HDC operator
5/8" x 34"

90_9210MO

LiftMaster Auxiliary Limit Switch Mod M62 Open Factory Installed

Provides a limit switch for use by others to control auxiliary devices such as lights heaters dock levelers or other equipment.
The switch can be used to turn on or off such equipment when the door is fully opened or fully closed.
When ordering specify whether the auxiliary switch is required on the OPEN or CLOSE side of the control enclosure.
A maximum of 2 switches per operator can be supplied.
Each switch is SPDT (form C) and is rated 10 amps at 125/250 VAC
Wire leads are provided on field install kits

.......more details

.393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

MHN-SET-100

Magnetic House Number Set 5" Black Embossed 100 pcs

Flexible magnetic material with an embossed finish
100 piece contains ten each of numbers 0-9
Priced per box

MAREDLED17

LiftMaster Red LED Light Stip 13ft Long

Provides LED visibility on both sides to 17 ft. arm.

MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

Provides LED visibility on both sides to 12 ft. arm.

K001A5251-4

LiftMaster LGO Replacement Board 315 MHz **DISCONTINUED

.250-334-R

Cut-to-Length Torsion Spring .250 x 3-3/4" Right Hand Wound Green

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

H105L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 575 VAC 3 Ph Logic 5 Left Hand W/Brake

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'installation Sell sheet Brochure

MO00003

Micanan Compression Spring for PRO-H/HB

0.80 ID x 0.092G x 1.80 Long

420001

Linear Wireless Keypad Multi-Code 300 MHz

Compatible with 300 MHz Multi-Code receivers
4-digit access code
Backlit keys
Weather-resistant keyless entry station transmitter
Easy access to battery
Power: 9-volt battery

.......more details

.363-6-L

Cut-to-Length Torsion Spring .362 x 6" Left Hand Wound Green/White

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

108D34

LiftMaster Light Lens K108D0034

Compatible with models 1270 1280 1280R
Fits older chain drive models with 2 lights: 1250 1265 320WD 1260LK 220WD 1260LK 220WD 1355

.363-6-R

Cut-to-Length Torsion Spring .362 x 6" Right Hand Wound Green/White

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

4X16SC50

Devanco Loop 4' x 16' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

PB-BE102BP

Contact Block N/C Contact Plastic Enclosure *** No Longer Available No Replacement

Base mount

7001-WG-16-MO

Residential Wood Grain Side & Top W/S Medium Oak 16' Long - Painted Screws to Match

Medium Oak retainer with Medium Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

7001-WG-7-CO

Residential Wood Grain Side & Top W/S Cherry Oak 7' Long - Painted Screws to Match

Cherry Oak retainer with Cherry Oak vinyl
PVC Wrapped
Steel is Notched on Both Ends for Easier Installation
Economical
Dual Fin Vinyl
Painted Screws to Match

.......more details

1013-1-1/4-10

Rigid Vinyl Bottom Retainer L-Shaped 10' Long

For door thickness: 1-1/4"

MA028

LiftMaster Padded Barrier Arm Yellow 14ft

For use on Mega-Arm gate operator
Requires adapter collars model MA031 - sold separately

Additional arm accessories

157370

Decorative Lift Handle Yorktown Style 8-3/4" Stamped Steel Sold per piece

Black Stamped Steel
Also known as Spade Style
Mounting hardware sold separately
Priced per each

TC134-10

Top Cap 1-3/4" 10 ft Black Box Qty Only ** To extent of Inventory

Sold in box quantities only
12 pieces per box

CB3160500-KOR

Cable 3/16" 7x19 500' Galvanized Supreme

Galvanized cable 3/16" 7x19 500ft spool.
Cable break strength: 4200 lbs
A higher quality cable compared to the Chinese cable
Meets endurance test requirements of over 35000 work cycles
Lubricated for flexability and longer service life

Comparison charts

UNI-100-142

Uni-Size Bottom Weather Seal 14'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

G658056

LiftMaster Counterweight for BG790 Arm

For 17' gate arm and up
For use with various LiftMaster® Barrier Arm Gate Operators (BG790) and Perimeter Access Solutions.
Also known as: 108056 088056 10-8056 G658056 G088056 10-8056M

G651208R

LiftMaster Replacement Wooden Wishbone Arm 24ft White / Black Stripes. for BG790 Counterweight NOT incl

Counterweight sold separately part # G658056
Replacement wishbone arm up to 24ft for BG790

5001-8-CHARCOAL

Residential Side & Top Weather-Strip 8' Long - Charcoal

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

1104-ASFT-24FT

Elton Aluminum Stiffener for 1104 24ft

Prevents the 1104 from buckling in the hot sun

5001-7-CHARCOAL

Residential Side & Top Weather-Strip 7' Long - Charcoal

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

1104-ASFT-10FT

Elton Aluminum Stiffener for 1104 10ft

Prevents the 1104 from buckling in the hot sun

1104-ASFT-8FT

Elton Aluminum Stiffener for 1104 8ft

Prevents the 1104 from buckling in the hot sun

HSC-1000

Hand Swager 1/4" & 5/16"

Swages 1/4" and 5/16"
Made in Japan

BSG115-LED

Devanco Stop and Go Light Black Housing 115V LED

LED Traffic Light Red/Green Dock Light
Weather-proof 2 piece housing with highest available UV rating
Ultra bright LED's for easy viewing in direct sunlight
Lenses measure nearly 4" in diameter
Requires 4 wall mounting screws 1/4" or 5/16" thread - not supplied
Made in Canada

.......more details

Installation Instructions Instructions d'installation Sell Sheet

39-10541

LiftMaster Clutch Disc for SL595 (K39-10541)

MAW123-BLK-U

Miller Edge Air-Wave Edge Black Sold per Foot

This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
It has been designed to fit most doors with double track bottom retainers.
With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
The MAW123 is resistant to flame water and most common greases and oils.