Devanco Canada - Get The Right Garage Door Opener‎ and Parts

37222R

Genie Series III Deluxe Wall Console

3 function wall console for use with IntelliG™ and TriloG™ openers.
Same as GBWC-BX
3 function console operates door opener controls lights and security lock out switch.
Not compatible with Series II

.331-514-R

Cut-to-Length Torsion Spring .331 x 5-1/4" Right Hand Wound Red/White

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-514-INSTALLED
For spring filler use part no. SPRING-FILLER

.243-258-R

Cut-to-Length Torsion Spring .243 x 2-5/8" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.243-258-L

Cut-to-Length Torsion Spring .243 x 2-5/8" Left Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

5-36-6

2" Vertical Track 14-GA 11'-4" (12' door) Sold per Pair

ALUM-431

Aluminum 24" x 100' Spool Bright White / Blanc Pur # 431

20% thicker than the aluminum sold in retail stores (0.022" )
Aluminum on the reverse side
Gentek # 431

Colour chart

21702

Doorlec Close Auxiliary Switch Double Limit DAT

STRUT-3-20'

Door Strut 3" Hemmed 20ft Long

Reinforcement bar 3"

MG020-B-2E-05

Miller Edge Sensing Edge Black 2-Wire End Outlet 5ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

BCH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by CRBH751L5-RH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4
Brake installed on operator

Installation manual Manuel d'installation Sell sheet Brochure

.343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

MD-00248

Sprocket 50B28 x 1" 1/4" KW 2SS 5/16"

SLC-221

Linear Commercial Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details

7-28-1A

Lynx Standard Barlock Kit Bars sold Separately

Bars are sold separately.
Hardware bag for doors 12' and under

Assembly Manual

WOR

Linear Wiegand Output Receiver 318 MHz

Designed for use as an access control interface for Linear’s block coded digital transmitters.
The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
Ideal way to facilitate handicapped access
Multi-button transmitters can double as personal emergency devices for triggering security alarms
RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding

.......more details

MS001

LiftMaster MSL & MSW Control Board (K79-60142)

Replacement logic board for the Mega Slide and the Mega Swing gate operators.
Can be used in various Autogate Operators same as AG001

K77-37986

LiftMaster Current Sense Conversion Kit 3PH L5

6976.182.23.440

Whiting Single Spring Balancer Assembly .182 x 23" x 44" Shaft

5001-10-BLACK

Residential Side & Top Weather-Strip 10' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

5001-9-BLACK

Residential Side & Top Weather-Strip 9' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

1104-16'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 16' Long - Light Bronze (F) **NLA

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-10'-LT-BNZ

Residential Side & Top PVC Weather-Strip with cap 10' Long - Light Bronze (F). **NLA

Light bronze rigid vinyl retainer with light bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

07-8058

LiftMaster Crank Link BG790

K12-8033

LiftMaster Female Rod End RH

Lower rod end for BG770 BG790
same as part # 12-8033

HTRNB

LiftMaster Heater Kit for AC Pad Mount Gate Operators

Heater kit for pad mount AC gate operators.
Battery bracket NOT included.
Protects system to -40° F and installs on operator frame
Measurements: 6 x 2 3/8 x 3 3/8

.319-6-LH

Cut-to-Length Torsion Spring .319 x 6" Left Hand Blue/Green

Spring wire only. Cones and Filler extra

1104-14FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 14' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-12FT-BRONZ

Residential Side & Top PVC Weather-Strip with cap 12' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-9FT-BRONZE

Residential Side & Top PVC Weather-Strip with cap 9' Long - Bronze (F)

Bronze rigid vinyl retainer with bronze flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

IRB-RX

EMX Industries Receiver Board Only for IRB-4X *** No Longer Available

PBTL3-RED

Replacement Button Only - N/C Stop Red

Stop switch and rubber cover for PBTL-3

12575

Doorlec Clutch Disc Fiber 4" dia.x 5/8" bore

Fits model LJ / LJH

20113R

Genie Limit Switch Screw Drive

For use on Genie screw-drive openers.
Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
Replaces either the UP or the DOWN limit switch
Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
Not compatible with excelerator models

28002

Doorlec Flange Bearing F-360-13 5/8" (1.59cm) Hole

Fits model LJH/W

K75-10259

LiftMaster Track Spacer Assembly

Standard duty trolley operator part

2704.192_340

Whiting Roadside Torsion Spring 2-3/16" ID 34" Long

Torsion spring wire only
.192 wire size

K001A3200-2

LiftMaster Gate Receiver Isolation Kit

Isolates the 850LM receiver from the ground loop and prevent the fuse from blowing.

PRO-HBH-7521U-R

Micanan 3/4HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand (Pro-HHD)

3/4 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

4X20PO50

Devanco Loop 4' x 20' pave-over 50' lead-in

Ideal for use on with gravel driveways or surfaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

Installation instructions Instructions d'installation Spec Sheet Brochure Loop Placement Guide Guide de positionnement des boucles

1003-4-DF-CUT

Bottom U-Rubber 4" Dual Fin Black Sold per Foot

Sold in cut lengths per foot.
Dual fin

029-98290-PRIMR

W-Style Replacement Door Primer Only Stainless Steel Package 029-98290

Replacement door size between 96-1/4" - 98" wide x 72-90" high
Primer only
Stainless steel package

MEL-T315

Miller Edge MEL Transmitter 315 MHz 2nd Generation

MEL provides a wireless signal transmission from an edge sensor to operator controls eliminating the need to hard wire these devices

ME123-M-YEL-LH

Miller Edge Yellow LH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

ME123-M-YEL-RH

Miller Edge Yellow RH 4-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

Electromechanical slide in edge for sectional doors and sliding gates.
Touch sensitive singaling allows for immediate stopping and reversing of motion
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Worksheet Installation manual Sell sheet

LDM-1

Long Distance Module

Compatible with all door and gate operators that use 24V AC
20 mile range

CS303-C-1

EMX Car Sense Vehicle Detector Control Unit *** Replaced by LRS-C1

The CarSense™ 303 features advanced 3-axis magnetoresistive sensing technology.
The sensor measures Earth’s magnetic field and responds to disturbances caused by ferrous objects.
The CS303 combines this exciting new technology with a fieldproven hardware platform to produce a high-sensitivity compact and cost-effective solution for reliable vehicle detection.
Three sensing elements provide magnetic field measurement in the X Y and Z axes improving detection sensitivity.

9382263800

Square Torsion Spring .375 x 6 x 38" with Cones RHW 1-1/4" Bore

MCT-1

Linear 1-btn MegaCode Visor Transmitter 318 MHz ** To Extent of Inventory

Activates one 318MHz MegaCode receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery incl.
Codes: 1000000+ (MegaCode format)
Dimensions: 2.16" W x 3.75" H x .95" D

.......more details

PVD-ARM-ALUM-16

Aluminum Gate Arm 16' 1" x 3.5" with Reflective Band

.437-6-R

Cut-to-Length Torsion Spring .437 x 6" Right Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

19-5116-NP

LiftMaster Trolley Roller Chain Pack #41 for 16ft Door Nickel Plated

For 3/4 & 1 HP trolley operators

MGS20-Y-2U-04

Miller Edge Sensing Edge Square Yellow 2-Wire Universal Outlet 4ft Long

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty

PRO-TB-7523-U

Micanan 3/4HP 230V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-HBH-7523U-L

Micanan 3/4HP 230V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

3/4 HP230V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
304L rust-resistant stainless steel
12 gauge

102079

Flangette Retainer football style 2 pieces 2 hole PFL6Z PFL206

2 required per bearing # 101475
works with: 1-1/4" bore sealed insert bearing part # SB206-20

41A7920-1

LiftMaster Hardware Kit

41A2770-17

LiftMaster Hardware Kit for 8550 8160W

Universal Hardware bag for LiftMaster 8550 8160W Operator.

37561R

Genie Belt and Bullet Assembly 7ft

For 7' Tall Doors Only
Fits the following models: IntelliG 1000 (3024) IntelliG 1200 (4024)
SilentMax 1000 (3042) SilentMax 1200 (4042)

K20-5150LD

LiftMaster Electric Motor 1/2HP 120V MT/MH Motor

ST-ACTIVATOR

Soft Touch Activator

Same as ST-PRIMER
Used to make the glue dry faster
Approx 10 ounces 300ML spray can

MC00012

Micanan Gear Reducer PRO-GOHD BHC 63 40:1 56C

ST-PROFILE

Soft Touch Profile Sold per Foot

Yellow air-wave edge
Fits most standard 1-5/8" retainers
300 feet in a roll

K72-33873

LiftMaster Output Shaft Kit MT / BMT

Complete kit includes output shaft bearings sprockets chain roll pin and turac

.393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Orange

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

RA-AD-WKP-05

Lynx 5-btn Wireless Keypad AD455 372 MHz

Programming Instructions Compatibility chart

1104-7'-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Dark Sandstone (DDG)

Garaga dark sandstone rigid vinyl retainer with Garaga dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

PHOTO-038

Manaras Non-Monitored Photoelectric Cells Nema 4/4X/6P/12/13 Retro-Reflective

Retro-Reflective
24Vac 30' range
Includes 3" reflector

22306

Programmable 7-Day / 24 Hr Timer

MARED12

LiftMaster Red LED Light Stip 9.9ft Long ** Discontinued

Provides LED visibility on both sides to 12 ft. arm.

K001A5251-4

LiftMaster LGO Replacement Board 315 MHz **DISCONTINUED

EXA-2000

Linear Directional Antenna (AAE00331)

Compatible with all Linear receivers with Type F antenna connector
Receives signals in 288 to 320 MHz range
Directional remote antenna designed to enhance the radio range of Linear receivers
Includes 10 feet of coax
Clamp for mounting
Dimensions: 21” W x 5” H x 1.5” D

.......more details

15-50B35QGH

Sprocket 50B35 1-1/4" Bore 1/4" Keyway

H105L5-LH

LiftMaster Ind. Duty Hoist Op. 1 HP 575 VAC 3 Ph Logic 5 Left Hand W/Brake

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details