Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MD00420

Micanan Flex Coupling Lovejoy 3J x 3/8"

ST14COP-50

Copper Stop 1/4" 50 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL14COP

TMQ-GRG826-80:1

Grove Gear Gearbox Current Model 80:1 Ratio Assembly D 56C

26140

Doorlec Cam Shaft Threaded 5/8" x 10-3/4"-24

This limit shaft will work on all Side-Mount Doorlec Openers
Cam shaft 5/8" (1.59 cm) - 24 x 10 3/4" (9.5 cm) fine thread

MOTOR254

Manaras Electric Motor 1/2HP 120/240V 1PH

Continuous-duty base mount 60Hz
This item is compatible with BRAKE011

MD00020

Micanan Sprocket 50B40 X 1-1/4"

MT22-MON-Y-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MT22-MON-Y-LH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Yellow Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

.262-334-R

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Red/Yellow

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.273-334-R

Cut-to-Length Torsion Spring .273 x 3-3/4" Right Hand Wound Orange/Red

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

MU22-2WIRE-E-G

Miller Edge MU22 2-Wire End Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

MU22-2WIRE-LH-G

Miller Edge MU22 2-Wire Left Hand Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

12131

Doorlec Brake Disc 4" x 5/8" Keyway

Fits Doorlec model SGOH

Q088

LiftMaster Arm Assembly HCT K75-50146

Same as K75-50146

503267

PEEK Vehicle Loop Detector 24V with Harness Nema 1 ** Discontinued

Enclosed requires separate 24VAC power.
Wiring harness with plug for detector included.
OPEN only (all LiftMaster operators) or SAFETY/HOLD OPEN only (operators with type B2 T TS or T1 control wiring) when vehicle passes over loop wire
Requires a loop of wire embedded in the ground to connect to the detector.
Requires 2-wire output connection to door operator and 24VAC power
Also known as: G50625S24

.......more details

PRO-TB-5011-E

Micanan 1/2HP 115V 1P Trolley Operator with Brake NM ECB No Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Non-Monitored board NO photocells
On-Board receiver holds up to 20 transmitters

D-2-8

Keyed Disconnect Device 8ft Cable

Operated from the outside to disconnect the trolley for manual operation of the door
Must specify if keyed alike is required or keyed random will be shipped
Mounting plate dimensions: 2 1/2” x 1 3/32”

MK-00649

Micanan UL325 Monitored N1 Thru-Beam Photocell

34201

Doorlec V-belt Pulley MA20 2" x 5/8" bore

K74-18379

LiftMaster Hall Effect Sensor for SL575 SL585

Hall effect assembly for SL540/570/580/575/585 operators with GL Board
Includes: screws flat washers lock washers and replacement instructions
Same as: G74G0487
This part has a short lead-in wire and will not work with SL590 or SL595

.312-6-R

Cut-to-Length Torsion Spring .312 x 6" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

838

Skylink Transmitter / Receiver Set Rolling Code ***NLA

Generates new code each time you push the button these codes never to be repeated.
99.99% works with most brands of garage door openers.
Ideal replacement for older or obsolete models.
Electronic scanners "code grabber" cannot duplicate the operating code.
Easy to install & program.
Works as a secondary receiver (both original existing receiver and 838 receiver will work simultaneously).

.......more details

41C5141-1

LiftMaster Square Rail Trolley Kit Chain Drive

Same as: 062313 41C5141 41C5141-1
Compatible with all Chamberlain and Craftsman square rail chain drive models

9150000626

3/32" Stops ONLY 100/pkg

Stops only 100 per pack

LIMIT020

Manaras Unimax Snap-Action SPDT without Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

43402

Carriage for R-99 Trolley

41A2780

LiftMaster Chain Pulley Bracket Kit

Also known as: 1B3214 1A2780 1C2762 41A2780 41B3214
Compatible with ATS 2595 3595 models

255744-BEAD

Wayne Dalton Bead Style Bottom Seal Yellow Sold per Foot

Yellow
Width: 5-7/8"

34104

Doorlec V-belt Pulley 7" x 5/8" bore

25-01064

Truck Door Stainless Cables 97" 1/4" eye 7x7 Pair for Roll-Up Doors ** To extent of inventory

Works with both Whiting and Todco doors
Cable size: 1/8 "
Nylon eye ends are used on 1/4" & 7/16" eye cables which give superiour strength and corrosion resistance

CABLE_1/4SS-250

Cable 1/4" 7x19 250' Stainless Steel

P220-1K

Heddolf 1-btn Transmitter 9-Dip Switch 318 MHz

318MHz single button 9 trinary dipswitch remote control transmitter
Compatible with Allstar and Pulsar
Compatible with P294-K receiver

LMTBU

LiftMaster Monitored Through Beam Photo Eye Nema 4X ** To exent of inventory

Meets 2016 UL 325 requirements
Long Range powerful beam provides reliable performance.
Sensing distance up to 90 ft.
Anti-Fogging Lens
NEMA 4X rated
Wireless network mode eliminates the need to wire between operators in dual-gate applications.

.......more details

28-30081

Truck Door 1" Horizontal Track 6" Radius for T-Style Std Doors 120" Roadside (LH)

Galvanized steel 14 gauge construction
For use with 1" diameter rollers
6" radius for smooth door operation
Track coupler used for proper alignment at track joints

PRO-TB-5011-U

Micanan 1/2HP 115V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

WB-400-24V

Audible Warning Device Exterior Surface Mount 24V

6" bell 85 DBA

225-120R

Electraray Rotating Warning Light Red 120V

Incandescent warning light
90 flashes per minute
Operating temp. 31 to 150 degrees fahrenheit
Height: 7-1/4" Diameter: 5-1/2"
Enclosure rating: Nema4X

BL-BAG-12

Barlock Hardware Bag Only for Doors 13ft and Over

Does NOT include the locking bars

Assembly Manual

41A3589-1

LiftMaster 8ft Belt Assembly for Models '93-2000

For use with LiftMaster belt drive models 1270 1280 1280R.
Full belt assembly
For use with Chamberlain belt drive models 8100 8200 and 9200.
For standard 8 foot high garage doors
T rail assemblies ONLY.

WE684

Omni Electric Motor TEFC 1HP 208V – 460V 3PH D56C

C-Flange

ME00035

Micanan Limit Shaft Light Duty 3/8-1/2 x 8-1/2"

G108019

LiftMaster Arm Clamp PVC

Used in connection with arm # G651209P

180210

Decorative Pull Handle Aspen-V3 Style 10-1/4" Stamped Steel Sold per piece

As seem on carriage house doors

180215

Decorative Hinge Apen-V3 Style 16" Stamped Steel Sold per piece

As seen on carriage house doors

RESET008

Manaras Resettable Overload Fuse 11A 1 Phase

FRONTIDLER010

Manaras Front Idler Assembly #41

MGH-6115-ECB-RH

Manaras 1.5 HP 120V 1P Jackshaft with Elect. Circuit Board Right Hand

A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
Electrically activated drum-band type solenoid brake
Full overload protection

Installation manual Sell sheet

37558R

Genie Belt Drive Sprocket Assembly

Complete assembly for the belt sprocket on top of the machine.
Works with the following models: IntelliG 1200 and IntelliG 1000

60-7241

Standard Caution Sign French 12" x 24"

333857

Wayne Dalton T-Style Weather Seal Sold per Foot

Used on garage doors and mini storage doors
T = 7/16" wide – .438 Bulb is 7/8" x 7/8"

10-1000-CUSTOM

Strip Curtain PVC Door Custom Made ** Price by Quote Only

.312-334-L

Cut-to-Length Torsion Spring .312 x 3-3/4" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

SF600U-114

Spring Fitting 6" Pair for 1-1/4" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

38072020

Tie Down Chain Assembly GR 70 5/16" x 20' Hook / Hook

Boron manganese steel heat treated chain
Hook on both ends
WLL LBS : 4700

39914650

Hitch Pin Forged Wire Handle 7/8" x 6-1/2" Red

Usable length is measured between the shoulder and the cotter pin

38079001

Agri Safety Chain GR 70 3/8" x 69"

Min. strength: 20200 lbs
Includes hook joiner link & tag

PPLV1-100

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Sold in a 100 pack

.......more details

Programming Instructions Instructions de programmation Sell sheet Brochure

108D79

LiftMaster Light Lens 108D0079M

Replaces 108D68 and 108D68-1

PBT-3

Exterior 3-Btn O/C/S Control Station Nema 4 Metal Enclosure

Surface mount
Metal enclosure
Not CSA approved
Dimensions: 6" H x 2-3/4" W x 3-1/2" D

92-00005

Truck Door Hex Nut 5/16"-18

Cross ref: W #10.1033.2 for both #2376 & #7176 balancers

OCS-PANEL

GDI Panel Buttons Open/Close/Stop N1/ N4 G3253

Power LED

CR-2

Battery CR2 3V Photo Lithium Battery

Camelion brand

029-98105

T-Style Replacement Door White Stainless Steel Package 029-98105

Replacement door size between 72"- 98" wide x 100.25-105" high
Painted white
Stainless steel package
Includes Hinges Rollers and Cable

TRACK-SET-2LHR-R

2" Tracks Set 7'-0" Low Headroom 1-3/4" Door Clips for Wood Frame R12 Torsion Rear

Complete set - torsion rear

37222R

Genie Series III Deluxe Wall Console

3 function wall console for use with IntelliG™ and TriloG™ openers.
Same as GBWC-BX
3 function console operates door opener controls lights and security lock out switch.
Not compatible with Series II

Q239

LiftMaster Limit Switch Wire Harness K70-51094 **DISCONTINUED

Includes harness and 4 limit switches for Miracle One

P294-K

Heddolf 4-Wire Single Channel Receiver with F-Connector 318 MHz

Controls one gate or garage door.
318MHz
12 or 24VAC or VDC
9 three position dipswitches (+/0/-) •Switchable relay for pulse to continuous
5 wires: 2 for power 3 for relay contacts
Coax antenna not included. Please see MK-00719 86LM.

.......more details

7543.2

Whiting Bottom Panel with Seal & Channel TempGuard 13-5/16" x 95-1/4" FPW

Replacement for serial # 164352

757-325

Fasteners Lag Screw Hex Washer Regular Profile 5/16" x 1-5/8" 325/Bag KH

7/16" head
Ideal for fastening tracks to the wall

ALUM-559

Aluminum 24" x 100' Spool Pebble / Kaki # 559

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 559
Reverse side is #431 Bright White

Colour chart

5-36-7

2" Vertical Track 14-GA 12'-4" (13' door) Sold per Pair *** NLA

STRUT-3-20'

Door Strut 3" Hemmed 20ft Long

Reinforcement bar 3"

21702

Doorlec Close Auxiliary Switch Double Limit DAT

MG020-B-2E-05

Miller Edge Sensing Edge Black 2-Wire End Outlet 5ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

BCH751L5-LH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Left Hand ***Replaced by CRBH751-LH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4
Brake installed on operator

Installation manual Manuel d'installation Sell sheet Brochure

DM518-COATED

Cable Drum Specialty Coated Standard Lift 18' 5250-18 Pair

18' standard lift with special protective coating.
Features bimetallic corrosion protection
1000 hr. salt spray performance
Abrasion resistant chrome free excellent corrosion protection
Pair includes: (1) LH and (1) RH.
Color coded: Red=LH and Black=RH

.......more details

CP-MO-12R-115/1

Lynx Electric Motor Emerson 1/2 hp 120V Instant Reverse 6 Wire *** NLA

Replaces the 4 wire AO Smith electric motor

GAREX-EB-PLATE

Garex End Bearing Plate 3-3/8" Special Order

WB-300

Skylink Multi-Function Wall Console ***For Old EQ Models

For use with the Skylink garage door openers.
Oversized Push Button for activating the garage door opener.
Activate opener light on/off and the light will remain on until the button is pressed again.
Feature with Lock function to ignore all radio signals for added security.
Illuminated LED indication.
Easy to Install.

.......more details

FCC316-500

Cable 3/16" 6x19 Galvanized Fiber Core 500ft

For high-speed doors
3/16” 6x19 galvanized
Polypropylene core to help prevent wear and increase flexibility
High life cycle wire rope for rapid doors
Lubricated during production for extended life
500 feet per roll

.......more details

BCH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand ***Replaced by CRBH753L5-LH

Industrial Duty Hoist Operator with Damp Environment modification
Comes with CPS-UN4 photoeyes
External brake included

Installation manual Manuel d'installation Sell sheet Brochure

T-832-H

FL-Heddolf 2-btn Transmitter 311 MHz (T-832-S) ***Discontinued

Open/Close remote for 2 doors
Battery 12V included
Compatible with Keystone T-832-H and old Allstar T-832
8 dip switch
Same as P220-2K

Programming instructions

ALUM-547

Aluminum 24" x 100' Spool Sable / Sablon # 547

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 547
Reverse side is #431 Bright White

Colour chart

MK008050

Push Button Standard Residential Non-Illuminated 2 Wire Bell Button

SPST
2 mounting holes
Dimensions: 2.375 x 0.875 x 0.75 inches
Color: Light Gray
Intended for indoor use

BL-14

Barlock Kit Complete for 14ft Wide Door Kit includes hardware bag

Kit includes hardware bag and bars (85-1/2")

Assembly Manual

COAX-5-RG6

Coax Cable Assembly 5 ft

Assembly includes union

ODCC-SPEC.ORDER

Wayne Dalton Special Order *** Price by Quote Only

Misc. code for all special order items

MIRM-T2-50

Miller Edge Patriot 2 Photo Eye Monitored 50ft Non-Contact ** Discontinued

Attaches directly to a Sectional door.
The photo eyes travel below the door during the closing cycle.
Unlike traditional static mount photo eyes; Patriot travels with the door sensing obstructions prior to contact.
The Patriot2 non-contact system consists of thru beam photo optics.
Emitting and receiving eyes mount into a rigid steel spring loaded retracting housing.
The housings attach to the bottom section of the door and extend below the leading edge of the door providing an invisible infrared light beam of protection.

.......more details

PRO-LH-5011R-LH

Micanan 1/2HP 115V 1P Medium-Duty Jackshaft with Contactor Left Hand (PRO LHR)

Designed for use on commercial sectional doors with high or vertical lift
May also be used on small rolling grilles with max. 15 cycles per hour
Includes chain hoist
Includes solenoid brake
No longer available in contactor model (2017)

Installation manual Specification sheet

26-943255

Truck Door Bottom Panel with Seal (15.5" x 98") for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

FHKS3D-86

Stainless Steel Face Hardware Kit 3" Track Double End Stile 6 Panel 8 Sections

Kit includes: Top & bottom fixtures center hinges end hinges and self drilling hinge screws
All hardware is heavy-duty 12 ga material
Kits are configured for up to 2" door thickness. Other door thickness are available by request.

23-20088

LiftMaster On/Off Switch 120V 15A

Also known as: SN5530039 MA019

K75-34828

LiftMaster Idler Shaft Kit

Complete with: Bearings Sprocket 50B12x1" and Idler Shaft.
For SL575 SL585 with GL Board

K20-3075M-5

LiftMaster Electric Motor 3/4 HP 575V 3P BM/CF ** Replaced by K20-3075M-5-H25

Also known as: 20-3075B-5 2030755 K20-3075B5 K20-3075M-5

346

Cable Clamps Galvanized 3/16" Sold per piece

Galvanized malleable cable clip

SSZP15-6-114

Solid Shaft 1-1/4" Keyed 15'6" Zinc Plated

Actual length is approx. 15'-6"

CR-2154

Raynor Replacement Photocells *** Discontinued

The original PEC-R3 Sensors manufactured by Raynor are no longer available.
The CR-2154 Sensors are the only sensors currently available to replace the original PEC-R3 Sensors.
Includes both the Emitter and Receiver sensors
Includes new sensor mounting brackets. Wires are not included.
These sensors are slightly different and will not mount to the original PEC-R3 sensor brackets.
The new CR-2154 Sensors require new mounting brackets (included) to be installed

.......more details