Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.312-258-L

Cut-to-Length Torsion Spring .312 x 2-5/8" Left Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.306-514-R

Cut-to-Length Torsion Spring .306 x 5-1/4" Right Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.306-514-L

Cut-to-Length Torsion Spring .306 x 5-1/4" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.295-6-L

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

.306-2-L

Cut-to-Length Torsion Spring .306 x 2" Left Hand Wound Red

Priced per inch
For factory installed cones priced seperately - use part no. C-200-INSTALLED

.295-514-R

Cut-to-Length Torsion Spring .295 x 5-1/4" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-514-INSTALLED

ALUM-532

Aluminum 24" x 100' Spool Almond / Amande # 532

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 532
Reverse side is #431 Bright White

Colour chart

ME117-2W-BLK-U

Miller Edge 2-Wire Black Universal Outlet Sold by the Foot

Electromechanical slide in edge for 1" to 2" sectional doors.
Touch sensitive signaling allows for immediate stopping or reversing of motion. The ME117 is resistant to water flame and most common greases and oils.
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details

Installation manual Sell sheet

PRO-J-7583-U-RH

Micanan 3/4HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-7583-U-LH

Micanan 3/4HP 208V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-7511-U-LH

Micanan 3/4HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-5023-U-RH

Micanan 1/2HP 230V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-5083-U-RH

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-5081-U-LH

Micanan 1/2HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

BCH755L5-RH

liftmaster Hoist Op. with Carwash Mod. 3/4 HP 575 VAC 3 Ph L5 Right Hand ***Replaced by CRBH755L5-RH

Industrial Duty Hoist Operator with Damp Environment modification
Comes with CPS-UN4 photoeyes
External brake included

PRO-LJ-5021-U

Micanan 1/2HP 230V 1P Jackshaft N1 Eyes Monitored ECB Universal Mount

On-Board receiver holds up to 20 transmitters

PRO-LJ-5021-U-RH

Micanan 1/2HP 230V 1P Jackshaft N1 Eyes Monitored ECB Right Hand

On-Board receiver holds up to 20 transmitters

PRO-LJ-5011-U-RH

Micanan 1/2HP 115V 1P Jackshaft N1 Eyes Monitored ECB Right Hand

On-Board receiver holds up to 20 transmitters

PRO-GT-15023-U

Micanan 1-1/2HP 230V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-15081-U

Micanan 1-1/2HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-15011-U

Micanan 1-1/2HP 115V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-10083-U

Micanan 1HP 208V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

NUT-14-SS

Nut Stainless Steel 1/4"-20 Flanged Serrated Hex

PRO-APTB-7521-U

Micanan 3/4HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

PRO-APTB-7581-U

Micanan 3/4HP 208V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

PRO-APT-5083-U

Micanan 1/2HP 208V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO ATPE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-7525-U

Micanan 3/4HP 220V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-7583-U

Micanan 3/4HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 HP models
Monitored board

PRO-T-5011-E

Micanan 1/2HP 115V 1P Trolley Operator NM ECB No Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Non-Monitored board NO photocells
On-Board receiver holds up to 20 transmitters

PRO-T-5083-U

Micanan 1/2HP 208V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

88-8

Wheel Chock 88-8 Laminated Rubber Galv. Steel Sides

Fabric Reinforced Tire Rubber
Galvanized Steel Sides
Size: 8" wide x 8" long x 8" high

60-7248-WC5810

Wheel Chock Safety Pkg incl'd: chock wall bracket 15' chain 3/16" quick link (2) & English Caution Sign

System Includes (1) WC-5810 Chock Bracket Chain Tie Back Chain and English Caution Signs
Solid Rubber Construction
Hook for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 10" long x 5" high

60-7248-CMH94

Wheel Chock Safety Pkg incl'd: chock with integral handle wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CMH-94 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
One Piece Solid Rubber
Integral Handle
Long Lasting 80 Durometer rubber
Size: 7-1/4" wide x 9-3/4" long x 7-3/4" high

CBI-29

Wheel Chock CBI-29 Cast Ductile Iron

Made from Cast Ductile Iron for Impressive Strength
Painted Blue for good Visibility
Completely Reversible for Simple Use
Size: 8" wide x 12" long x 9" high

60-7248-IC10

Wheel Chock Safety Pkg incl'd: yellow formed steel chock w "tooth" like bottom wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) IC-10 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
"Tooth" Like Bottom Grips Icy/Slippery Ground Surface
Powder Coated Yellow for High Visibility
Formed Steel
Size: 8" wide x10-1/2" long x 9-1/4" high

RELAY043

Manaras Relay 4-Pole 24VAC

Used on Manaras MLJ MLH MLT Models

STRUT-2-1/4-10'

Door Strut 2-1/4" Hemmed 10 ft Long

Reinforcement bar 2-1/4"
Electro-Galvanized
22-GA

RBH503L5-RH

liftmaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

MD-00004

Sprocket 410B12 x 1" 1/4" KW 2 SS 5/16"

K23-30716

liftmaster Stop Switch 120VAC 6A

Same as 20-30716

MP-00204

Micanan Splash Proof Covers PRO-H J HHD GH GHC (Fully Assembled)

drawing

PRO-APTB-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Operator N1 Eyes Monitored ECB with Brake

Designed for use on Commercial / Industrial high cycle sectional overhead doors with standard lift tracks.
Low clearance design for apartment applications (9.5")
External radio control terminal strip
3-btn O/C/S control station Nema-1
Solenoid brake installed
Door speed 12" per second

.......more details

212SE

Nortek Linear Weatherproof Keypad

120 users
Indoor/outdoor self contained brushed metal housing
Surface mount vandal resistant design
One piece housing suitable for wall post or gooseneck mounting
Durable metal Braille alpha-numeric keys
4 on board programmable timed relays

.......more details

31D380

liftmaster Sprocket Cover

Sprocket Cover Replacement Kit for use with various LiftMaster® and Chamberlain® Chain Drive Garage Door Openers

C-RING

Contact Ring for Centrifugal Switch in Single Phase Motor

MK00594

Micanan Auxiliary Contact Block 100FA40

MOUNTSHAFT010A

Manaras Hoist Shaft Kit for MJH (after-1998)

For MJH MJHW/C/X built from 1999-2003

SPR50B54X11238

Sprocket 50B54 for a 1-1/2" Shaft 3/8" keyway

SPECPARTEL001

Manaras 3-btn Push-Button Control Station with Pilot Light Nema 4/12

2 N/O contacts and 1 N/C contact for stop.
Surface mount.

DB13-T

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Tapered Sides Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
4-1/2" depth
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.

.......more details

ME00071

Micanan Idler Shaft PRO-APTC

DBE-10

Molded Rubber Bumper Black 10" L x 4 1/2" W 3" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
10" L x 4 1/2" W 3" Projection

.......more details

LVB1224-11

Laminated Bumper Black 12" Projection Vertical Installation 24" L x 11" W Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LVB1220-11

Laminated Bumper Black 12" Projection Vertical Installation 20" L x 11" W Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

STRUT-2-1/4-9'-NH

Door Strut 2-1/4" Non Hemmed 9 ft Long *** To Extent of Inventory

Reinforcement bar 2-1/4"
20-GA

LB1010-14

Laminated Bumper Standard Black 10" x 14" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB912-24

Laminated Bumper Standard Black 12" x 24" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB910-24

Laminated Bumper Standard Black 10" x 24" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-36

Laminated Bumper Standard Black 12" x 36" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB812-12

Laminated Bumper Standard Black 12" x 12" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB436-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 36" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TVB420-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

Drawing

LVB424-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TB412-14SF

Steel Faced Laminated Bumper Black 12" x 14" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-36SF

Steel Faced Laminated Bumper Black 10" x 36" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB612-36SF

Steel Faced Laminated Bumper Black 12" x 36" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB612-14SF

Steel Faced Laminated Bumper Black 12" x 14" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-24SF

Steel Faced Laminated Bumper Black 12" x 24" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-18

Laminated Bumper Standard Black 12" x 18" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB612-12

Laminated Bumper Standard Black 12" x 12" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB436-11

Laminated Bumper Black 4" Projection Vertical Installation 36" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB412-24

Laminated Bumper Standard Black 12" x 24" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB412-18

Laminated Bumper Standard Black 12" x 18" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB410-36

Laminated Bumper Standard Black 10" x 36" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB410-12

Laminated Bumper Standard Black 10" x 12" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

.207-3-9-LHW

Mini Storage Spring .207 x 3" x 9" long Left Hand

44-60-300

Extension Spring 10' Door - 300 lbs Tan ** By Quote Only

Clipped ends
44" long 60" stretch 300 lb load

RESET014

Manaras Resettable Overload Fuse 17A 1 Phase

41A4371

liftmaster Belt Cap Retainer

Same as 41C4371

MK-00019

Micanan 3-Phase Overload Base

Base only

MK-00694

Micanan 10K OHM Resistor *** DISC Repl by MK00713

CP-SH-34-1712_SHAFT_ONLY

Lynx Clutch Shaft Only for HDC Operators

Fits all HDC operators - waterproof or not. All HP all years
3/4" x 17 1/2" - 2.15lbs

AIRSWITCH016

Fraba Air Wave Switch Only

Fraba air switch only

PO17

Overhead Door Bottom Astrigal Rubber for Rolling Steel Doors Sold by the Foot

MS-00006

Micanan Trolley Track Set 12 Ga. 16'6" (for 14' h. door) Includes 2 Angles Only

Set includes 2 tracks only
Chain NOT included

MG00013

Micanan Ribbed Hex Nut 3/8" - 16 UNC

PRO-GHC operator parts
8 required per operator

MF00011

Micanan HH.H. Bolt 3/8" - 16 UNC x 3/4" Long

Used on PRO-GHC
10 required per operator

MH00043

Micanan Flange Bearing 3/8" D **** Replced by MH00096

90-PGR

liftmaster Parking Gate Radio Mod. Kit

G90PGR includes the limit switch wiring and bracket.
Used on PG HBG and BG models.

MX-00151

Micanan Complete Hoist Shaft Assembly for PRO-GH Includes Pocket Wheel

Includes: pocket wheel shaft bevel gear chain guide spring collars spring pin and washers

108135.0002

Overhead Poly Type V- Belt for Old RG 32" *** by quote only

TRACK-SET-2

2" Tracks Set with Wall Brackets Special Order

Custom order to customer's needs
Set includes the vertical and horizontal tracks and wall clips for either wood or steel.
Must spcify if the door has torsion or extension springs if the tracks are going on a wood jam or steel desired radius and thickness of door

2376.171_25.930

Whiting Torsion assembly .171 wire size 25" spring length 93" shaft

MX00037-120V

Micanan Brake Assembly for PRO-J/H 120V Solenoid included

CP-HU-LDT-12-115/1

Lynx LDT Medium Duty Trolley Op. 1/2 HP 115V 1P UL325

For standard lift sectional doors
Available in 1/2 HP only
Equipped with instant reversing motor heavy duty ball bearings on all line shafts logic board
Max door height: 14 ft
Solenoid brake optional

MK-00013

Micanan Relay 120VAC coil DPDT (Flange Mount)

110956.0001

Overhead Brake Band Kit for RMX

Brake band kit for the Overhead Door RMX commercial operator.


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login