Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

26-40027

Truck Door Bottom Seal 98" Long for Whiting Dryfreight Doors

  • Flexible PVC material
  • Cross Reference: W #1676
1110197

LiftMaster Take Up Bolt 3/8"-16

  • Measures 3-15/16" Long
  • Also known as: G115015 1110197 115015 11-10197
MK00643-MOD

Micanan Auxiliary Apt. Circuit Board for Red/Green Light Feature 115V Models Installed on Op.

  • Available option for electonic circuit board (E) models only
K13-32087

LiftMaster RPM Cup

  • SL595UL
K75-34791

LiftMaster Clutch Kit for SL585

  • Kit includes: Clutch disk Clutch plate Torque Limiter Hub Sprocket Washer E-Rings Nut Bearings and Compression spring
K77-39428

LiftMaster Replacement Cover CSW24UL

  • Cantilevered cover
  • Includes labels keys cam-lock assembly
  • Sliding-latch door for reset switch
  • Protects internal gate operator components from exterior tampering weather damage
2500-562

Linear Tokens for Token Acceptor 1000/pkg

  • Token only
HTR-460

LiftMaster Heater Kit for AC Pad Mount Gate Operators 460V Only

  • Heater kit for pad mount 460V AC gate operators.
  • Includes transformer
  • Battery bracket NOT included.
  • Protects system to -40° F and installs on operator frame
950-189

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Right Hand

95-00115

Truck Door Rivet 1-1/8" Stainless Steel

  • Stainless steel construction
  • Round head design
  • Cross Reference: T #89217-0036
2528.096

Whiting Dual-Spring Shaft 96" for Whiting Roll-Up Doors

  • Constructed of 1" outside diameter heavy-duty steel tubing
  • Holes pre-drilled
  • Cross Reference: For Whiting # 2376 balancer
1104-10FT-CHARC

Residential Side & Top PVC Weather-Strip with cap 10' Long - Charcoal (H)

  • Charcoal rigid vinyl retainer with charcoal flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
165-B

Fusible Link For Loads 1 to 10 lbs

  • Length is 1.4328" width is .563"
  • Distance between center is .938"
  • Priced per each
  • Fire rated at 165 degrees Fahrenheit
41D3483

LiftMaster Chain Assembly Kit 8'

  • For use with various chain drive garage door openers that utilize a T-rail and have a 8' garage door
OSH-6432-M-N1-RH

Manaras Opera-SH 1/2 HP 480V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
MGH-6237-M-N1-RH

Manaras 3 HP 208V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6535-M-N1-LH

Manaras 1.5 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6434-M-N1-LH

Manaras 1 HP 480V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6434-M-N1-RH

Manaras 1 HP 480V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6433-M-N1-LH

Manaras 3/4 HP 480V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6433-M-N1-RH

Manaras 3/4 HP 480V 3P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6213-M-N1-LH

Manaras 3/4 HP 240V 1P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6113-M-N1-LH

Manaras 3/4 HP 120V 1P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
OGH-6113-M-N1-LH

Manaras 3/4 HP 120V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
OGH-6233-M-N1-LH

Manaras 3/4 HP 208V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
PRO-HBHW-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N4 Eyes Monitored ECB Left Hand (Pro-HBHW)

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • .......more details
OGH-6536-M-N1-LH

Manaras 2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
1-1683

RW Hinge 434BL-BB Black 48" 3/8" x 2-1/2" wide Sold per Hinge

  • Pintle: Formed Steel 3/8" Thick
  • Strap: Formed Steel 3/8" thick x 2-1/2" wide
  • Pin: 3/4" dia Steel Zinc Plated Loose pin with cotter pin 1" diameter steel
  • Bearings: 2 Precision Ball Bearings
  • Black Enamel
DRIVE009

Manaras AC Drive 1HP 120V 1ph for RSH

OSHW-6213-0M00

Manaras Opera-SH w/Carwash Mod 3/4HP 240V 1Ph Mon ECB w/N4 Photoeyes Right Hand

  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
  • .......more details
OTBH-6114-M-N1

Manaras Trolley Operator 1 HP 120V 1Ph Monitored w/N1 Eyes

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
  • Includes PHOTO-070
  • .......more details
10ELB

BEA Evoloop Bracket

  • etal bracket accessory for the EVOLOOP sensor.
MX002467

HySecurity Eyebolt Nut and Nord-Lock Cylinder Anchor

  • Anchors and adjusts hydraulic cylinder to mount 1" includes eyebolt 2 nuts and 2 Nord-Lock washers
  • For use in StrongArm models manufactured after 03/25/2011
CLASSIC-R12

Garex Ready to Install Door Special Order

  • R12 Insulation - Short Panel only - Available in a selection of colours - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements
MSJ-6534-M-N1-LH

Manaras MSJ 1 HP 600V 3Ph Monitored Board w/N1 Eyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 35 cycles per day > 150 cycles per day
  • .......more details
2GW-L

Rolling Steel 2" Stamped Alternate Windlock Left Hand

ME120-Y-2WIRE-E

Miller Edge Yellow 2-Wire NM End Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
  • .......more details
FORK001-RH

Manaras Disconnect Fork Right hand

LEDSTRIP003

LED Light Strip (1 Unit) Red/Green/Blue 46" 24VDC

  • An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option
FLO2

NICE 2-btn Dip Switch Remote 433.92 MHz

  • Nice 2 Button 433.92MHz radio-control with programmable code - 1024 combinations.
  • Contains 10 DIP switches inside for coding.
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
D4-36

Extruded Bumper Black 36" L x 4 1/2" W x 3 3/4" H w/Metal Insert

  • Reinforced prime rubber of Durometer 75 (±5) (ASTM D2240)
  • 8.3 N/mm2 (±0.5) Tensile Strength (ASTM D792)
  • 98% (±2) impact recovery
  • All extruded fenders are supplied with a metal washer insert
  • 3 holes
27121-600V

Doorlec Electric Motor 1-1/2 HP 600V 3PH DC223C

GRX-40X13-134-WTE

Thermal Window Clear 40" x 13" for 1-3/4" Garex Door White Frame

  • For 1-3/4" thick door
GALV-331-6-R

Cut-to-Length Torsion Spring .331 x 6" Right Hand Wound Galvanized Red/White

  • Priced per inch - cones and filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
  • For spring filler use part no. SPRING-FILLER
  • Galvanized
GALV-331-6-144-L

Torsion Spring .331 x 6" x 12ft LH Galvanized Red/White

  • Wire size: .331
  • Inside diameter: 6"
  • Length: 12 ft
  • Galvanized
2807.182*290

Whiting Spring Assby .182 x 2-3/16 x 29" Curbside

  • Replacement torsion spring with cones
  • Specs: .182 x 2-3/16" x 29" Long
  • Roadside
  • For Roadside order part # 2807.182*290
JHDC22X4BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 480V 3PH 60 Cycles/Hour 2200LB

  • New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
  • Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
  • Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
  • Listed to ANSI/CAN/UL325 Standard for USA/Canada
  • Drive Type 65:1 Gearbox with #50 Chain Output
  • Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls
  • .......more details
788-037-2MX

Blue Giant Hold Down Assembly Rewind Style Compete

  • Holdown Aircraft Cable Rewind Style Blue Giant-Complete
BGARMFOAM

TECHNA Barrier Gate Arm Foam Insert

  • esigned for use with the TECHNA Barrier arm this 14' roll of extruded foam offers additional protection reducing the chance of vehicle scratches •IP68 rated waterproof LED lights •Operating temperature: - 13F to 140F ( -25C - +60 C) •Weight ~2lbs
7-6100

RW Hanger 160B2 Sold per Unit

  • Hanger used on #333 track
  • For door thichness: 2-1/4" to 3-1/2"
MM00078

Micanan Solenoid Lever Limited Duty MSI0094

O02R9506

AirLift O Ring Orig. Op-AirLift

BARL-1003-158-18

Elton Bottom Aluminum Retainer Fits 1-5/8" Doors Brush/Seal Channels 18ft Long

  • Aluminum bottom retainer that integrates a 45-degree brush seal channel combining two essential commercial door seals into one robust solution
  • Compatible with V1003 bottom rubber 3" to 6.5"
  • Integrated 45 degree angle retainer for our RL brush seals
  • Brush seal deters rodents
  • Available in 18 foot lengths easily customizable to desired length
  • Available for Garage Door Thickness: 1 5/8"
  • .......more details
7909212

FAAC Control Panel Main Circuit Board for FAAC 844

CP-RE-24-OMRON

Lynx Relay 24V Omron DPDT 10A

2807.177*250

Whiting Spring Assby .177 x 2-3/16 x 25" Curbside

  • Replacement torsion spring with cones
  • Specs: .177 x 2-3/16" x 25" Long
  • For Roadside order part # 2806.177.250
2200-027

Linear Chain #41 Master Link

SEL2641R433-Z4-F

Erone 4-Relay Stand Alone Mini Receiver Fast 433MHz

050DCRJB3MC

LiftMaster Receiver Logic Board DC. WiFi HD RJO

  • Security+ 2.0 Receiver Logic Board Replacement Kit
  • For use with the LiftMaster® 98032 Heavy Duty Residential Jackshaft DC Wi-Fi® Garage Door Operator; powered by myQ® and manufactured 2024 to present
  • The unit will feature a yellow circle learn button
BCSI-PM04

Pivin Drapeau Gear Reducer in Synthetic Oil *** Price by Quote Only

SBR-N1-0L-H120

Micanan Brake Assembly for PRO-HBH LH 120V Solenoid included

  • Solenoid Included
24040

Doorlec Roller Chain #40 Sold per Ft

GHX-311-1-RH

Doorlec Explosion Proof Gear Head 1 HP 120V 1PH ECB Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included
1222_DUAL_TROLLEY_12'

LiftMaster Dual Trolley kit for 12' high door includes #41 Chain for 12ft High Door Angle tracks (2x) 12' and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 12ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
MC271-2MON-RH-GY

Miller Edge MC271 2-Wire Monitored Right Hand Gray Includes End Flaps - Sold per Foot

  • Ideal for Cornell double angle bottom bar
  • Flexible and will conform to floor irregularities
  • Optimum size for 2+ inch thick surfaces
  • Custom manufactured to user specifications for color length and outlet location
  • 5-inch end flaps create a complete seal and can be trimmed for custom fit
  • Sealed assembly impervious to dust and debris
  • .......more details
028-200

Blue Giant Proximity Sensor 18mm 2m Cable **Special Order

  • Price by Quote Only
27209

Doorlec Electric Motor TEFC 3HP 208/480/575V 3-Phase DC333C

  • Frame size is 56C
OSHW-6112-M-N4-R

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
  • .......more details
OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
  • .......more details
GAREX-WINDOW

Garex Thermos Made-to-Order Size Special Order

  • Special order to suit customer's needs
OSH-6232-M-N1-LH

Manaras Opera-SH 1/2 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Left Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
BMT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator with Solenoid Brake

  • 1/2 HP 120 volt 1 phase medium-duty logic trolley operator with brake
  • Medium-duty logic board with integral 315 MHz radio receiver
  • CPSU commercial photoeyes included
  • 4L V-Belt #48 drive chain adjustable friction clutch
  • Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
  • 2 year warranty
  • .......more details
36310

Doorlec Flicker Relay OFF/ON 120V AC

K94-37848-2

LiftMaster Electric Motor 1.5HP

  • Replacement motor for SL595151U •1.5HP 1PH 120/208-240VAC
41B6228

LiftMaster Mounting Bracket RJO

  • Also known as: 041C0902 41A6228 41C0902 41B6228
ETBH-311-3/4HP

Doorlec 3/4 HP 115V Trolley Door Opener with solenoid brake

  • Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.
GAREX-24X12-CBRN

Garex Thermo Window Clear 24" x 12" Commercial Brown Frame

  • An original Garex window
  • Fits 1-3/4" thick door R16
RB-P-K10C

Miller Edge RBand Monitored Wireless Door Edge System

  • RBand is a monitored sensing edge transmitter/receiver system.
  • The receiver can be paired with up to three transmitters.
  • On board diagnosticsallows for easy set up and troubleshooting.
  • Offers pulsed and normally open outputs.
  • Ideal for commercial door operators manufactured after 2010.
  • Bi-directional link improves immunity to RF interference.
  • .......more details
WHITING-COLDSVR

Whiting Cold Saver Panel Special Order- Made to Measure Quote Only

  • Special Order Sold by Quote Only
IP-MON

CDVI Interior Touch Screen Monitor for IP-MDS/IP-SDS Video Intercom System

  • Interior 7" touch screen TFT monitor for use with the IP-MDS/IP-SDS intercom systems in white.
  • IP system connects through the PoE system and also has a free to download app available on iOS and Android. The VDP app allows for users to connect with visitors at the door station and can control the door locks remotely.
  • Rectangular shape (available in square shape: IP-MONSQ)
  • SIP Server
  • Operating temperature: -10C to 55C
  • Call recording and built-in memory
  • .......more details
BCSI-PM03

Pivin Drapeau Hex Bolt 5/8-18 *** Price by Quote Only

SPR50B42X114-3/8

Sprocket 50B42 1-1/4" shaft 3/8" KW 2SS 5/16-18

  • 42 tooth sprocket for #50 chain
GALV-312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Galvanized Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
  • Galvanized
GALV-306-334-R

Cut-to-Length Torsion Spring .306 x 3-3/4" Right Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-334-INSTALLED
GALV-343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-262-334-L

Cut-to-Length Torsion Spring .262 x 3-3/4" Left Hand Wound Galvanized Price per Inch

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
K41-0374-000

LiftMaster 24VDC Motor Gear Box Encoder (Jackshaft 700)

  • Maxum J-700
19-40010-SS

LiftMaster Roller Chain #40 Stainless Steel 10ft/pk

  • 10ft length
CP-MO-34R-123/1

Lynx Electric Motor 3/4 HP-IR 115/230V 1 Ph

  • Electric motor only with instant reverse
PRO-SD-10081-U-RH

Micanan 1 HP 208V 1P Horizontal Sliding Door Op. Monitored ECB N1 Eyes Right Hand

  • Designed for use on commercial / industrial sliding doors or sliding fire doors
  • External radio control terminal strip
  • 3-btn O/C/S control station Nema 1
  • #41 roller chain & sprockets on all internal drives
  • Heavy duty 5L v-belt
  • Solenoid brake standard
  • .......more details
PL-A26-LENS

Lynx Front Light Lens LPL 455+

E/BLOP/118

Automatic Systems Option Double Limit Switch

GUSSET-MOUNT

Doorlec Gusset Mount Plate Up-Charge (L Bracket) GH

  • Mounting plate for GH op
MD00093

Micanan #410 Roller Chain 45 Pitch c/w Connecting Link

50018

Doorlec Photo Switch Polarized Explosion Proof Reflective w/Round Reflector

  • Class 1 Div 1 Groupes CDEFG explosion proof Certified CSA
GHX-353-1.5HP-R

Doorlec Explosion Proof Gear Head 1-1/2 HP 575V 3PH ECB Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included
PRO-GH-10023U-L

Micanan 1 HP 230V 3P Gearhead Op. N1 Eyes Monitored ECB Left Hand

  • Designed for use on all rolling doors and grilles and for large sectional doors with high or vertical lift.
  • Full function smart 10.0 logic board featuring on-board receiver with antenna and enhanced program selections.
  • External radio control terminal strip
  • Three button O/C/S control station Nema-1
  • Supplied with Nema-1 photocells
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • .......more details
MD00128

Micanan #410 Roller Chain 27 Pitch c/w Connecting Link

OGH-6536-M-N1-RH

Manaras 2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Right Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
  • .......more details
E/1929/094

Automatic Systems Left Bumper Ass'y (BL229)

  • Used on the BL229 gate op.