Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
MV-00024

Micanan 4-Door O/C/S Transmitter CT-4 313 MHz ** Discontinued

Programming Instructions
17-10336

LiftMaster Pulley 7.000"OD 3/4" Bore 4L-Belt

414001

Linear 4-Channel Multi-Code Visor Transmitter 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches
  • Power: 9-volt battery
  • Codes: 512 codes for each channel (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Installation Manual
2235.296-CUT

Whiting Coldsaver Bottom Panel 14-1/2" x 94-3/4" with lock Topcoat Long Pull Strap & SS package

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
97-75004

DOT-C2 Reflective Tape 150 ft x 2" W 11" White x 7" Red Pattern

  • DOT-C2 certified exceeds NHTSA requirements
  • Highly reflective even up to a 90 degree angle
  • Quick and easy to apply
DGPROX

Erone 1-Door Stand Alone Card Reader / Keypad

  • 500 users (proximity badges and/or codes)
  • 3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
  • Audible & Visual feedback
  • 1 request-to-exit input
  • Tamper switch
  • 1 form C door relay output (3A/125V)
    • .......more details
Programming InstructionsInstructions de programmationSell SheetWireless System Chart
1104-8'-DES-SAN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Desert Sandstone

  • Garaga desert sandstone rigid vinyl retainer with Garaga desert sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
27-48-320

Extension Spring 8' Door - 320 lbs Green

  • Single - Loop
  • 27" long 48" stretch 320 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
MP00021

Micanan Up-Charge Track and #410 (#48) chain for 24' h Door *Actual length 318"*

  • For 1/3 HP and 1/2 HP operators only
MP00016

Micanan Up-Charge Track and #41 chain for 16' h Door *Actual length 222"*

  • For 3/4 HP and 1 HP operators only
M003

Rolling Steel Groove Mouth GM679

B014

Rolling Steel 2" Flat Bar 5/16" Sold per Foot

17JW

Rolling Steel 2" Flat Cast Windlock

  • Windlocks are especially used on rolling steel doors and shutters to prevent "blow-ins" from severe storms or winds.
  • A wind lock is a small metal device that is attached to each slat.
  • Its primary function is to reduce the amount of friction that occurs between the actual door & the guiding panel.
  • When the wind is strong the roller door may be dislodged bent or misaligned from the guide.
  • With a windlock your door can operate efficiently despite wind load or pressure.
  • Windlocks are easy to add on to any existing rolling steel or shutter door
    • .......more details
2522

Whiting Thrust Washer

  • Used on Whiting balancer assemblies
SLT4-22

Rolling Steel 3" Crowned Slat 22-ga Galvanized

SLT4-20

Rolling Steel 3" Crowned Slat 20-ga Galvanized

SEL2641R433-IP5

Erone 2-Relay Stand Alone Receiver Up to 500 Users 433MHz

  • 2 transmitter keys per user
  • 1 NO relay + 1 NO/NC relay (24VA)
  • Self-learning memorization
  • 12/24V AC/DC
Wireless System Chart
CARRIAGE006

Manaras Trolley Carriage Aluminum Die Cast

OTBH-6233-1-ECB

Manaras Trolley Operator 3/4 HP 208V 3 Ph with Electronic Circuit Board

  • Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
  • 25 cycles per hour 80 cycles per day
  • It incorporates a drum-band type solenoid brake.
  • Tracks are an extra 36 lbs per track
  • 3/4 HP & 1 HP operators come with #41 full roller chain
Installation ManualSell Sheet
OSH-6433-ECB

Manaras Opera-SH 3/4 HP 480V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation ManualSell Sheet
87-P-075

LiftMaster Turac 3/4" Push on Fastener

CLUTCHPAD008

Manaras Clutch Pad 1" ID 4" OD

  • Replaces CLUTCHPAD002
OPJ-6232-ECB

Manaras Heavy-Duty Jackshaft Operator 1/2 HP 208V 3 Ph with Elect Circuit Board

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
Installation ManualSell Sheet
V1104-WHITE

Replacement Vinyl Only for 1104-White 200ft Roll

  • Sold in 200 ft rolls only
75W-RS-BULB

Rough Service Bulb 75W ** Disc. to extent of inventory

9150000629

3/16" Stops ONLY 100/pkg

  • Stops only 100 per pack
34538S.S

Genie Magnetic Close Down Limit Switch Assembly 138"

  • For Chain Glide models
18007

Doorlec Reducer BHC-63 5/8' or 7/8" Input

  • Gearbox for GH operator
BL229-ARM-12-R

Automatic Systems Aluminum Barrier Gate Arm 12 ft Round

774

Fasteners Hex Head Bolt 5/16-18 x 3/4" 1000/Box

  • 5/16" bolt has 1/2" head
  • Max torque = 12
  • Full thread
  • Grade 2/Grade 5 depending on availability
775

Fasteners Hex Head Bolt 1/4-20 x 3/4" 1000/Box

  • 1/4" bolt has 7/16" head
  • Max torque = 6
  • Full thread
RBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 ***Use RBH751L5-RH***

  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Brake standard on all RBH operators
  • #48 chain #50 output sprocket chain
  • Comes with CPS-U photoeyes and 02-103 O/C/S push button
    • .......more details
Installation ManualManuel d'InstallationSell sheet
Q400MAU

LiftMaster Relay Module

5X10SC50

Devanco Loop 5' x 10' saw-cut 50' lead-in

  • Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
  • Ideal for use on existing asphalt or concrete surfaces
  • Features a non spliced continuous wire throughout loop turns and lead-in.
  • requires the use of loop sealer when being installed to ensure long lasting trouble-free detection
Installation InstructionsInstructions d'installationLoop Placement GuideGuide de positionnement des boucles
41B4103

LiftMaster Service Belt Tensioner

K001D8075-1

LiftMaster Logic Board - L5 ** USE K001D8395

  • 14D1279E
Programming InstructionsInstructions de programmation
K72-14130-1

LiftMaster Limit Shaft Kit H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators

  • For models H J and HJ Logic 3 Logic 4 and Logic 5 commercial operators
  • Kit includes: Limit shaft Limit nuts Limit bearings Limit sprocket Interrupter cup Shim washers Compression ring Roll pin and E-rings.
111854.0002

Overhead Logic Board for RSX 3/4 & 1 HP 1PH

  • Description: KITPCB1PH3/4-1HPSX/HXUL10
  • For RSX ad RHX models 3/4 & 1 Hp Single phase operators
71-REDGRN-HCT

LiftMaster Red/Green Warning Light Box **DISCONTINUED

  • Signals if door is moving or stationary
  • Compatible with model HCT
Installation Manual
K75-10177

LiftMaster Brake Hub Assembly

  • Assembly includes: Brake hub set screw push-on fastener and feather key
K20-1075B-2LP

LiftMaster Electric Motor 3/4 HP 115/230V 1PH L3 L4 *** NLA Replaced by H24

  • Standard 3/4HP 115V Logic 3 or L4 model T J HJ SD & H
41C2735

LiftMaster Chain and Cable Assembly CMC84

  • Fits a Sears Craftman CMC84 operator
EL25G

LiftMaster Telephone Entry System Gray

  • Capable of accepting up to 2000 codes
  • 4 assignable and programmable built-in relays
  • Mounting versatility and available in 3 colors: Gray Nickel or Silver
Installation ManualSell Sheet
M3-3313

Marantec 3-Button Transmitter 315 MHz 97245 ** Discontinued

  • Same as part # 65894 97245
  • Includes battery CR2032
  • Made in Germany
Instructions
22405-KEYLOCK

Doorlec Weatherproof Pushbutton O/C/S Key Lock with On/Off Switch

22-00626

Truck Door Grab Handle 13" Zinc Plated ** This is no longer available

  • Steel construction Zinc plated
  • Cross ref: Eberhard 4300
08-11012

LiftMaster Bevel Gear 5/8" ID

  • Fits LiftMaster GH operator
DS-KIT

Linear Single Delta Radio Kit ** Discontinued

  • Kit includes one DT transmitter and one DR receiver
  • Same as: DNP00011
  • Operates on 24 VAC power
  • One channel
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Installation Manual
MX00149

Micanan Complete Clutch Shaft Assembly for PRO-H

M18

LiftMaster Remote Control Tester ** NLA

85LMC

LiftMaster Plug-In Power Supply

  • Plug-in jack for easy installation on Liftmaster receivers
  • Power input level: 105-135AC 24AC output
10-10355

LiftMaster Solenoid Link

C-200-INSTALLED

Cones 2" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF200
.234_2"-LH

Torsion Spring .234 x 2" x 12ft LH Blue/White

  • Wire size: .234
  • Inside diameter: 2"
  • Length: 12 ft
.192_2"-LH

Torsion Spring .192 x 2" x 12ft LH Silver

  • Wire size: .192
  • Inside diameter: 2"
  • Length: 12 ft
41A5668

LiftMaster Gear & Sprocket Assembly for ATS211X

  • For models: ATS211X ATS2113X
  • For older model ATS211 use part number 41C4470
Installation ManualManuel d'Installation
23-2017

LiftMaster Limit Switch SPDT

19-50HL

Half (Offset) Link #50

  • Half link for #50 chain
  • ANSI Standard Carbon Steel
41A5483-1C

LiftMaster Circuit Board Assembly *** Discontinued

  • Assembly includes: Circuit board and end panel
  • For chain drive units with one light
  • Fits models 2245 & 2255
  • Last letter of the part # indicates revision date the most recent product will be sent out
  • Also known as 41A5483-1 41A5483-1B
CP-SW-TD6A

Lynx Switch Light Delay

  • For the old Lynx 455 operators
50307

Doorlec Cam Shaft Sub-Assembly EHJ ETH ETBH LJH

  • For models; EHJ ETBH and ETH
  • Assembly includes: Cam shaft (26140) Oilite (11801) x 2 Sprocket 41B12-5/8" (31118) Flange Bearing (28002) x 2 and nuts.
VBELT_4L360

Manaras VBelt 4L 36" - repl. by A34

  • Used on MJ / MJH models
  • New belt type A replaces old 4L360. Part number VBELTA34
RADIO-15

Manaras MRX-1000 1-Channel 24V Receiver with Commercial Antenna 313 MHz ** To extent of inventory

  • Controls one operator with MT series transmitters.
  • Operates on 24VAC.
  • A LED indicates that the unit has been activated.
  • Can be installed directly onto the control box of a Manaras operator.
  • Includes a commercial receiver antenna for increased range.
  • Will be replaced by RADIO-RE901A
    • .......more details
Installation Instructions
2235.296

Whiting Coldsaver Bottom Panel 14-1/2" x xxx" with lock seal and retainer (Max 96")

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick max 96" wide
  • Includes Lock and keeper
1336.3

Whiting Curbside Top Panel Closure Bracket for 8" radius track

5600.3

Whiting Truck Door Stainless Steel Bottom Roller Bracket Assy Complete

4010-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree

  • For angle application (180 degree)
  • For use with Light Brush or Vinyl Insert
1008-1-3/8"

Bottom Nail-On for Wood Door Light Duty per foot

  • For 1-3/8" doors.
  • Color: Black
1006-1-1/2-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1104-18FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
1104-8FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-16FT-WHITE

Residential Side & Top PVC Weather-Strip with cap 16' Long - White (W)

  • White rigid retainer with white flexible vinyl.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
7001-8-WHITE

Commercial Side & Top Weather-Strip 8' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1001-24-BLACK

Commercial Side & Top Weather-Strip 24' Long - Black

  • Aluminum retainer with black dual-fin vinyl
25-42-220

Extension Spring 7' Door - 220 lbs Green w/ clip

  • Double - Loop
  • 25" long 42" stretch 220 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet
95-00114

Truck Door Rivet 1" Stainless Steel

  • Stainless steel construction
  • Round head design
  • Cross Reference: T #89217-0032
27-20127

Truck Door Spring Spacer 35" long for Whiting Roll-Up Doors

  • Extruded PVC construction with zinc plated thrust washer.
  • Cross Reference: 2471
26-14322

Truck Door Bottom Panel with Seal (12" x 98") for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood Primer finish
  • Comes only with bottom retainer and seal (installed)
DM18-125

Cable Drum Vertical Lift 18' 1100-18 (1-1/4") Pair

  • 18' Vertical Lift aluminum die cast alloy cable drums for 1-1/4" shaft.
  • 3/8"-16 x2" hardened cup point set screws installed with red heads.
  • Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
  • Max. Door Height: 18'-1".
  • Rated Lift per Drum: 660 lbs.
  • Max. Cable Diameter: 3/16".
    • .......more details
SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

  • Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
  • Pair includes: (1) winding & (1) stationary.
  • Not single thread.
  • Winding bar hole 5/8"
EP2984

Exhaust Port 4" with latch long barrel ** Discontinued**

  • 4" inside diameter 2" sleeve with latch.
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
CB3160500

Cable 3/16" 7x19 500' Galvanized

  • Galvanized cable 3/16" 7x19 500ft spool.
  • Cable break strength: 4200 lbs
Comparison charts
R5211

Cast Iron Pulley 5" with stud

  • 5" Cast Iron Pulley with double stud
  • cast iron pulley mounted on two pressed sealed bearings
  • Maximum cable diameter: 1/4"
BK021/PR

Commercial 3" Safety Bottom Bracket ** Indef Delivery

  • Maximum cable diameter: 1/4"
  • Maximum door weight: 1650 lbs Zinc
  • Plated Steel
  • Sold as a pair
HD3076

Lift Handle Roll Grip Round Zinc Plated 5-1/2"-5-3/4"

  • Measures 7" from end to end
  • Measures 5.5" from eyelet to eyelet
1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
MD-00247

Double Sprocket 41B14 / 41A32 with 3/4" Bushing

  • Double sprocket for clutch shaft on PRO-H/HB
  • includes 3/4" ID brass bushing
PRO-LJ-5011-U-LH

Micanan 1/2HP 115V 1P Jackshaft N1 Eyes Monitored ECB Left Hand

  • On-Board receiver holds up to 20 transmitters
MOUNTSHAFT014

Manaras Clutch Shaft Kit for Opera-H (OPH)

  • Input / clutch shaft kit for Manaras Opera-H
Drawing
RELAY043

Manaras Relay 4-Pole 24VAC

  • Used on Manaras MLJ MLH MLT Models
.205-3.5-10-RHW

Mini Storage Spring .205 x 3.5" x 10" long Right Hand

27-20400

Truck Door Bracket for Torsion Assembly Roadside (LH) for Todco Roll-Up Doors

  • Steel construction
  • Zinc plated finish
  • Cross Reference: T #51036-2 W #4028 360000
232168

Capacitor 3/4 HP 220V 65 MFD

  • For LCO75 only
ME113-L

Miller Edge Black Left Hand Outlet 2-Wire 1-1/2" wide x 1-1/2" high Sold by the Foot

  • Slide in edge designed for commercial sectional doors
  • Retrofits easily to 1-1/4" to 1-1/2" sectional doors
  • Touch sensitive signaling allows for immedita stopping or reversing of motion
  • For a sectional door: measure the daylight opening of the door or measure the panel width of the door
  • This gives you the "active length" of the edge - the length to order.
  • Lead wire: 22 gauge universal
    • .......more details
Installation ManualWorksheetSell Sheet
LVB636-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 36" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
ALUM-571

Aluminum 24" x 100' Spool Brownstone / Beige Antique # 571

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 571
  • Reverse side is #431 Bright White
Colour chart
10TD433HH2

BEA 2-Button Digital Transmitter 433 MHz

  • Transmitter offering means of activation of automatic doors with extended hold feature.
  • Delay and no-delay learn modes for either instant of delayed activation for sequencing doors.
  • Operating temperature: -10 to 55C
  • Controls one 10RD433 receiver.
K07-2706

LiftMaster Arm Hub

  • Also known as: 072706 07-2706 07-2706-1 G072706
  • For use with various LiftMaster® SW420 Series Swing Gate Operators
1-1093

RW Track Bracket #333

  • 22 x 333
1-0243

RW Stay Roller 153 Galvanized

  • For use on #31 square track