Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
BEA-10LIGHT-TR

BEA Modular LED Signal Light Segment Red

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
2400-501

Linear Retaining Ring

OMT-6112-MON-N1

Manaras Medium-Duty Trolley Operator 1/2 HP 120V with Elect. Circuit Board Monitored N1 Eyes

  • Designed for use on smaller and low-cycling industrial standard lift sectional doors.
  • It features a high starting torque intermittent-duty industrial type motor and a quick release disconnect arm.
  • Equipped with the new Electronic Control Board (BOARD 070) with N1 photoeyes
  • Maximum Door Height: 14' (4260 mm)
  • Back Room: door height + 3'11" (1175 mm)
  • Head Room For Tracks: 5" (127 mm) above the highest point of door travel
    • .......more details
2100-669-UPS

Linear Hub Clutch Cast Ir Pinned UPS HSLG

2100-1750

Linear Key Brake Disc 1/4 x 3/16 x 1-1/4

GALV-262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Galvanized Red/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
R6000

Shaft Collar 1" with 2 Set Screws

  • Set Screws: 5/16 x 18
DS100-SHEET-DOOR

Wayne Dalton Roll-Up Sheet Door Light Commercial ** Price by Quote Only

  • Sheet Door Made to Order
  • Round panel profile continuous curtains constructed of 26-gauge hot-dipped galvanized steel with a silicone polyester paint finish
  • Automatic door stop prevents the curtain from rolling up past the header
  • Heavy-duty steel axle supports door curtain and counterbalance system
  • Oil-tempered steel springs are engineered to counterbalance the doors providing for smooth easy operation and cycle performance
GDI-HB340

GDI Direct Drive & Jackshaft HAML-RBH-A830 Nema 4 To Accept 1" Shaft Non Monitored

  • Compact & Light Weight - Fast Installation
  • Applications Include Car Wash Cold Storage Pharmaceutical Agricultural Food Facility Sectional Grilles and Rolling Steel Doors
  • Brushless DC High Reliability Hi Efficiency & Low Maintenance Motor
  • No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain
  • One Operator Handles all AC Voltage Applications (115/208/230/460 & 575V)
  • Soft start soft stop
    • .......more details
OPH-6113-M-N1-LH

Manaras Opera-H 3/4HP 120V 1Ph Monitored Board w/N1 Eyes LH

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
K19-48069-NP

LiftMaster Limit Chain Assembly #48 x 69 NP

  • Compatible with LiftMaster® Model SL585U Slide Gate Operators
EHJW-321-3/4

Doorlec Ind Jackshaft Op. Watertight ECB 3/4 HP 230V-1Ph

  • Heavy-Duty Industrial Operator with Waterproof Mod. for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer-To-Close Delay On Reverse and Traffic Light Control (monitored board optional)
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
041-0365-000

LiftMaster Sensor Eyes and Brackets 1997-Current

  • For use with various LiftMaster® and Chamberlain® Belt Drive and Chain Drive Garage Door Openers; manufactured after 1997.
  • Complete kit includes: (1) Sending sensor eye (with LED) (1) receiving sensor eye (with LED) (2) replacement brackets and replacement hardware.
  • Also known as or Replaces: 041A5266-1 041A5266-3 41A5266-3 41A5266-1 12D584-1
GRX-138-U-WHT-10

Garex 1-3/8" Bottom PVC U Retainer White 120" (10ft)

  • Does not include the u-rubber
BCSI-PM203

Pivin Drapeau Chain/Spring Tensioner BCSI Gate Operator ** Price by Quote Only

MQ00007

Micanan Spring Pin 1/4" x 2" Long

461-0004-12

Richard-Wilcox #31 Square Track 12ft Length Sold per Piece

  • Used with #7-6095 rollers
  • Replacement for #75x14g
MGH-6537-ECB-LH

Manaras 3 HP 600V 3P Jackshaft with Elect. Circuit Board Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
SPR50B18X1

Sprocket 50B18 1" shaft 1/4" KW

  • 18 tooth sprocket for #50 chain
EHJ-321-1/2

Doorlec Industrial Jackshaft Op. 1/2 HP 230V-1Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
BRKIT001

Manaras Brake Resistor for 120V Rapido

  • Added option to RSH or RVH operators
Wiring instructions
1-0298

RW Track Bracket 1x33

  • Description: Formed Steel 3/16" thick
  • Finish: Black enamel
41C0589-2

LiftMaster Belt Cap Retainer

  • Also known as: 041C589-2 41A537 41C589-2
  • For use with various LiftMaster® and Chamberlain® DC Belt Drive Garage Door Opener Models such as 85503
  • Complete kit includes: Sprocket sprocket cover and replacement screws
236514

Wayne Dalton Res. Bottom Bracket Roller Holder RH

  • Compatible with Wayne Dalton 9100 9400 9600 9800 Foamcore II garage door models.
  • Pins & Cotters Included
  • Top quality galvanized steel
  • Dimensions: 4" Wide x 1.25" High x 1" side flange with milford pin
  • Sold as a single unit
2100-258-UPS

Linear Tension Bolt UPS 1/2 Chain

  • Used on various Linear Gate operators
ETBHW-311-3/4HP

Doorlec 3/4 HP 115V-1Ph Waterproof Trolley OP

  • Trolley Industrial type operator with DC2000 Logic controller
  • Watertight/Dust tight
OPH-6233-ECB-LH

Manaras Opera-H 3/4HP 208V 3Ph with Electronic Circuit Board Left Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
684-33-106

Universal Bracket 2.25" x 2.5" x 24" w/ Plate 2"x12"

HCT08

LiftMaster HCTDCU Rail Only for 7'6" Door

  • Yellow zinc dichromate premium rail finish offers maximum rust protection in open-air environments.
  • Heavy-duty 12-gauge C channel corrosion resistant steel track.
  • This DOES NOT include the head unit
WHITING-PLATE-DR

Whiting Special Order Premium Plate Roll Up Door Price by Quote Only

  • PremiumPlate Roll-up door offers an alternative to plywood.
  • Polyethelene (PE) composite panels are bonded to prepainted high-tensile steel faces for a durable high impact surfaces.
  • Tongue and groove joint.
  • 2 cable balancer with independent spring for each cable. Springs treated with rust preventative.
  • 5 rows of hinges.
  • Patented roller-change hinge design.
    • .......more details
ACP00922

Nortek LCD Display Assembly AE5/AE1K ***NLA***

  • Replacement screen only
FLO2R-SA

NICE 2-btn Keychain Remote 433.92 MHz

  • Rolling code No internal dip switches programming with the reciever
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
BK338/PR

End Bearing Plate Flanged 11-GA 3-3/8" with Bearing. Commercial Sold as a pair

  • For commercial applications Used on wood jambs
  • Includes (1) RH and (1) LH plate with bearing
  • EBF338
77

Whiting Steel Outside Cam Lock Black Standard

31110

Doorlec Sprocket 50B23 1" Bore KW/SS

URBAN-MR-R16

Garex Ready to Install Door Special Order

  • R16 Insulation - Narrow multi rib pattern - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration
HD8460-KYD-ALIKE

T-Handle Cable Lock System 1-3/8"- 2" ** Keyed Alike **

  • Complete cable locking system for a 1-3/8" or 2" door Keyed alike
  • System includes: Auto Latch Striker Keeper T-Handle keyed with 4-1/4" shaft Inside release handle 3/32" cable and all required hardware.
  • Also works for for 1-3/4" doors
  • T handle KA5 = keyed alike increment of 100 (5 different combination box (20 of each #)
CP-LX-KEYPAD

Lynx Wireless Commercial Op. Keyless Entry 372MHz

  • Illuminated Keypad
  • Weather shutter protects keypad from elements
  • Wireless Installation
  • 4 digit codes for maximum security
  • Allows for access without remote or keys
  • For use with any UL325 commercial operator that has an LX100 or LX900 board
    • .......more details
Programming instructions
PUSH148

Manaras Contact Block NO

  • Same as ZEN-L 1111
6X30PO50

Devanco Loop 6' x 30' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep
ALUM-536

Aluminum 24" x 100' Spool Dover Gray / Gris Granite # 536

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 536
  • Reverse side is #431 Bright White
Colour chart
Q118

LiftMaster Access Door Keys Qty 2 K80-50295

  • Also Known as K80-50295
J753L5

LiftMaster Industrial-Duty Jackshaft 3/4 HP 575V 3Ph L5

  • Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
  • The operators are typically mounted to the wall when used with smaller sectional overhead doors with a vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • J operators are attached to the door jackshaft to indirectly drive the door
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Security+ 2.0® safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you
SA1929/A17

Automatic Systems Retrofit Logic Board with Drive for BL229 Board *** Disc

  • Retrofit Assembly for the BL229 board this includes the new logic board with the drive.
  • Comes with E/BLOP/371 which are the loop detectors that go with that board. (no cost for the moment)
950-189

Richards-Wilcox 2" or 3" Single Bottom Cable Bracket Right Hand

10W8

Resistor 10W 8K OHM

KP-680-ETL

Koala Air Blower 1/2 HP *** Indef. Delivery

  • Powerful extra quiet and energy efficient 1/2 HP motor
  • 115V / 1 Speed
  • Durable super lightweight and compact Polypropylene housing design
  • ETL/CETL Safety Certified
ME123-2M-BLK-LH

Miller Edge Black LH 2-Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
2100-564

Linear Clutch Disk Facing HSL HSLG

111396.0004

Overhead Brake Kit Model H 1/2HP 1PH

Installation instructions
26CW14522-CUT

Truck Door Intermediate Panel (12" x Cut-To-Size) Painted White for Todco DryFreight Doors

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
CAP425

Capacitor 125VAC 425MFD

  • Motor Start Capacitor 125V 425 MFD
HSLG-121

Linear Commercial Slide Gate Operator 1 HP 230V 1 Ph - Heater not Included

  • Max duty cycle: Continuous
  • Integral APeX Controller
  • Double V-belt to chain reduction
  • #40 roller chain
  • Emergency manual disconnect handle
  • Powder coat finish
    • .......more details
PRO-GHC-10053U-R

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Full function Smart 10.0 logic board and on-board receiver
    • .......more details
MOUNTSHAFT017

Manaras Clutch Shaft Kit for MTH MTBH (no pulley) Old Pre-1998

  • Input / clutch shaft kit for MTH MTBH
  • For old MTH MTBH with 1" diameter input shaft no pulley included
620-100990

Linear Heater Kit Assembly 230V Cage Style

  • Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)
.343-6-R-C

Cut-to-Length Torsion Spring .343 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
.312-514-L-C

Cut-to-Length Torsion Spring .312 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-514-INSTALLED
.295-6-R-C

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Coated ** Price by Quote Only

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-600-INSTALLED
MP-00025

Micanan Auxiliary Chain Hoist for Jackshaft Op. / PRO-J (SCHAUX)

  • Allows for operation of a door by an auxiliary chain hoist.
  • Used primarily on center mount applications
MDT-1A

Linear 1-Channel Visor Transmitter MegaCode 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Superior transmission range
  • Factory programmed MegaCode format supports over 1000000 codes
  • Unique ”Extra” top button
  • High visibility operate LED
  • Visor clip included
    • .......more details
Programming instructions
MK-00404

Micanan Reversing Contactor ABB Size 1 120V w/Interlock

  • LC2K1210B7 mini contactor
MV-00214

Micanan Tele 8" Wand (For Utility Switch)

MM-00319

Micanan PRO-GJ L-Bracket Right Angle Front of Coil For Rolling Steel Doors

TN33C

Wire Nuts (Marrette) Yellow 22-10 AWG 100/Pkg

  • Screw-on wire connector
  • Wire Range: 22-10 AWG
  • Rating: 105C (221F)
  • Voltage: 600V
  • Approval: CSA UL 486C Listed
MK-00031

Micanan Transformer 230V-24V-40VA

60-7248-81111

Wheel Chock Safety Pkg incl'd: orange urethane chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

  • System Includes (1) 811-11 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
  • Not For Use on Ice
  • High Visibility
  • Orange Urethane
  • Size: 11" wide x 8" long x 8" high
27-24416

Truck Door Dual Torsion Spring Assembly 96/33 for Whiting Roll-Up Doors

  • Assembly includes: shaft LH & RH springs winding cones cable drums with bearings and spring spacers.
  • Springs are treated with rust preventative
  • Roadside cable drum is color coded RED
  • Specs: Shaft Length: 96" Spring Length: 33" Wire diameter: .182 Winding cone color: Green
MV-00133

Micanan Control Station 3-Btn O/C/S Nema 4 Surface Mount c/w Pilot Light 24V ** DISC..

LB410-24SF

Steel Faced Laminated Bumper Black 10" x 24" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
8010

LiftMaster DC Chain / Cable Drive Garage Door Opener ***Discontinued***

  • Customized DC Motor with soft start/stop action.
  • Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
  • Security+2.0 increases remote control range and reduces interference for consistent operation.
  • PosiLock® electronically protects against forced openings.
  • The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
  • Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)
    • .......more details
LB612-14

Laminated Bumper Standard Black 12" x 14" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB410-12

Laminated Bumper Standard Black 10" x 12" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
PRO-GHCB-20053

Micanan 2 HP 575V 3P Gearhead Operator with Brake No Controls

Installation manualSpecification sheet
MV-00296

Micanan Wireless Push Button Station OCS for Logic 10.0

  • Used only on Logic 10.0 program 3.2.5
2950-0003

3/64" Sleeve ONLY 100/pkg

  • Aluminum sleeves only 100 per pack
  • Stops are not available in this size
IRB-RET-HD

EMX Industries Steel Protective Hoods Only Black Fits Old Style IRB-RET Only

  • Protective Hoods for the Universal Retro-Reflective Monitored Photo Eye System (Item #IRB-RET) by EMX
  • Easily installed using the existing mounting holes of the Photo Eye
  • Constructed of zinc plated steel
  • Black powder-coated finish
  • Will NOT fit the new IRB-RET UL325-2018 units
ALUM-556

Aluminum 24" x 100' Spool Forest Green / Vert Foret # 556

  • 20% thicker than the aluminum sold in retail stores (0.022" )
  • Gentek # 559
  • Reverse side is #431 Bright White
Colour chart
41C5548

LiftMaster Wiring Harness Kit Low Voltage

  • For use with various LiftMaster® and Chamberlain® Garage Door Openers
SL-310T-2

Skylink 2-Btn Visor Mount Transmitter 310 MHz ** No Longer Available

  • Easy to carry or clip on sun visor.
  • Works in conjunction with Skylink Universal Receiver: Model SL-310R.
  • Operating range of 100 feet and more.
  • 12V alkaline battery included.
9006-08

Excalibur Threshold Kit 8'2" x 6" W Solid Aluminum ** Price by Quote Only

  • Stands 1/2" tall
  • Built with 6061-T6 solid aluminum to withstand extreme weight and excessive traffic conditions.
  • Two-way fastening/seal system won’t shift buckle or leak
  • Top V-groove design provides for skid proof protection and improved tire traction on loading docks and incline ramps.
  • The 1/2" diameter wire access port makes it easy for sensor and security installations.
  • The kit comes complete with pre-drilled counter sink holes 3/8" anchors and sealant.
    • .......more details
MX00034-575V

Micanan Brake Assembly for PRO-HHD with 575V Solenoid (MX00206-575)

  • Complete brake assembly including 575V solenoid - solenoid cover sold separately part #MM00011
38415A

Genie Chain Drive Sprocket

  • For Genie & Overhead Door Models
  • This is a 8-tooth sprocket with a hex drive bore
  • Genie Brand Models: Relia-G 600 Relia-G 800 1024 2024 QuietLift-600 QuiteLift-800 1042 2042 ChainLift-800 ChainLift-600
  • Overhead Door Brand Models With CHAIN DRIVE: Legacy 800 2026 Standard Drive 1026
MGH-6537-ECB-RH

Manaras 3 HP 600V 3P Jackshaft with Elect. Circuit Board Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
7001-16-BRONZE

Commercial Side & Top Weather-Strip 16' Long - Bronze (BZ)

  • Bronze galvanized steel with bronze dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (10)
TL-5000

Trailer Lock Lever 32-1/4" long Stainless Steel

  • Provides leverage to easily open shipping container doors
  • 18-8 Stainless steel construction
  • Polyurethane coated handle
  • 5.5 lbs.
  • 32-1/4" long
  • Fits most modern container door handles
    • .......more details
MR00006

Micanan Hand Chain Sold by the Foot

  • DOOR HEIGHT X 2 LESS 4 FT
BRAKE012

Manaras Band Brake Retrofit Kit Old GH/MGH

  • Does not include the solenoid
  • Replaces BRAKEPART012
LB406-14

Laminated Bumper Standard Black 6" x 14" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
105808.0001

Overhead Limit Cam

  • Compatible with Overhead models: RD RDA RDB SDA SEL SEL+ MD L L+ RG+ RDB+ JST+ EL FL SFL and DSB
ANT-1A

Linear 7-inch Rubber Duck Mid-Range Antenna *** To Extent of Inventory

  • Antenna for Linear’s 27 MHz mid-range transmitters and receivers
  • Seven-inch ”rubber duck” style
  • Supplied with CON-180A straight antenna connector
  • Order CON-90A connector for right angle antenna mounting
  • Dimensions .65” W x 7” H x .65” D
  • Same as: SNE00031
    • .......more details
89463

Marantec Deluxe Wall Control Panel w/ Light & Vacation Lock

  • This unit will work on any model Marantec garage door opener
  • Replaces part # 47307 65456 M3-543
  • Made in Germany
PRO-HHD-5011E-L

Micanan 1/2HP 115V 1P Heavy-Duty Jackshaft NM ECB No Eyes Left Hand

  • 1/2 HP115V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Non-Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
  • Emergency chain hoist with electrical cut-off for manual operation
    • .......more details
Installation manualSpecification sheet
MK00710

Micanan Varistor Harness 575V with White Wires

MV-00245

Allen Bradley Thru-Beam Photocell 42GRL Rec/Trans 110V 0-30ft Range

  • 42GRL 9000 and 42GRR 9002 transmitter 110V/receiver (24/115V) set
785105

FAAC XP30 Photocells 30m Range Relay 785163

  • Hardwired pair of Photocell relays
  • 30m Range
  • IP54
  • 24v
  • Dimensions: 55 L x 78 H x21 D mm
MP-00037

Micanan Hand Crank for Gearhead Jackshafts PRO-GH PRO-GHC

  • Provides for hand crank operation in lieu of hand chain and pocket wheel
26140

Doorlec Cam Shaft Threaded 5/8" x 10-3/4"-24

  • This limit shaft will work on all Side-Mount Doorlec Openers
  • Cam shaft 5/8" (1.59 cm) - 24 x 10 3/4" (9.5 cm) fine thread
.262-334-R

Cut-to-Length Torsion Spring .262 x 3-3/4" Right Hand Wound Red/Yellow

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-375-INSTALLED
SNRKPMKR

LiftMaster MiniKey Keypad White

  • Also known as: SNRKPVP SNRKPOLP SN1610016-B