Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
25-42-50

Extension Spring 7' Door - 50 lbs Red

  • Double - Loop
  • 25" long 42" stretch 50 lb load
  • Sold individually
  • Rated for 10000 cycles
  • Same as part number 105
Spec Sheet
34538S.S

Genie Magnetic Close Down Limit Switch Assembly 138"

  • For Chain Glide models
92803N6000

Truck Door .187 x 2.188 x 60 RHW

EHJ-311-3/4

Doorlec Industrial Jackshaft Op. 3/4 HP 115V-1Ph

  • Heavy-Duty Industrial Operator for Sectional or Rolling Steel Doors
  • DC-2000 logic with adjustable Timer To Close Delay On Reverse and Traffic Light Control
  • Solenoid Brake prevents coasting and secures the door when closed
  • TEFC (sealed) continuous-duty electric motor with overload protection
  • Automatic Friction Clutch protects the door and operator
  • Self-aligning Heavy Duty sealed Pillow Block bearings on all shafts for high cycle applications
    • .......more details
MM00011

Micanan Brake Solenoid Cover

CPS-UN4G

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4 Black

  • Waterproof photoeyes.
  • Monitored Thru Beam Photocell
  • For direct connect on HCT
276554

Overhead Door Ribbed Air Tubing 1" Sold by the Foot

  • Rubber tubing
OMNI-EXB

LiftMaster Relay Module

41B5424

LiftMaster Belt Idler Pulley and Bracket (Built Years 2000+)

  • This is a Belt Pulley Bracket Replacement Kit. For use with various LiftMaster® and Chamberlain® Belt Drive Garage Door Openers that utilize a T-rail
  • Fits models: 2500 2580 3280 3850 3500
3100P

LiftMaster Std Duty Roller Cage Bearing Hinge Flat Mount Prime Coated Sold in Pairs

  • Serrated Adjustable Yoke Design Provides Fast/Easy Adjustability up to .5 in.
  • Dependable Roller Cage Bearing Design
  • Even Weight Distribution
  • Five Times The Weight-Bearing Surface of the Nearest Large Hinge
  • Easy to Fully Lubricate
  • Maximum Gate Weight: Up to 1000 lbs. per pair. Sold in pairs
    • .......more details
OPH-6233-M-N1-RH

Manaras Opera-H 3/4HP 208V 3Ph Monitored Board w/N1 Eyes Right Hand

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
OPH-6532-M-N1-RH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Right Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
MGHB-6537-M-N1-RH

Manaras 3 HP 600V 3P Jackshaft Monitored w/N1 Eyes with brake Motor Upgrade Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGHB-6437-M-N1-M-RH

Manaras 3 HP 480V 3P Jackshaft Monitored w/N1 Eyes with brake Motor Upgrade Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6436-M-N1-LH

Manaras 2 HP 480V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6215-M-N1-LH

Manaras 1.5 HP 240V 1P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGH-6115-M-N1-RH

Manaras 1.5 HP 120V 1P Jackshaft Monitored w/N1 Eyes Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
BARL-1003-158-16

Elton Bottom Aluminum Retainer Fits 1-5/8" Doors Brush/Seal Channels 16ft Long

  • Aluminum bottom retainer that integrates a 45-degree brush seal channel combining two essential commercial door seals into one robust solution
  • Compatible with V1003 bottom rubber 3" to 6.5"
  • Integrated 45 degree angle retainer for our RL brush seals
  • Brush seal deters rodents
  • Available in 18 foot lengths easily customizable to desired length
  • Available for Garage Door Thickness: 1 5/8"
    • .......more details
BGARM12LED

LiftMaster TECHNA Barrier Gate Arm only 12ft with LED

  • Ships in manageable 6-foot sections for streamlined transport and storage enabling easy on-site assembly
  • Strong aluminum extrusion with reenforced male/female joining sections and fasteners for a secure fit
  • The arm features a bottom channel designed to hold BGARMFOAM thereby minimizing the chance of scratching the vehicle.
  • Compatible with the S50L a wireless edge safety device.
  • IP68 rated waterproof LED lights
  • Operating temperature: -25C - +60 C
    • .......more details
28001

Doorlec Flange Bearing F-360-13 3/8" (.94cm) Hole

  • Fits model LJHW
K77-36539

LiftMaster Output Shaft and Sprocket Kit

  • Compatiable with various LiftMaster® Commercial Swing Gate Operators
  • Kit includes smooth-barrel cylinder shaft + sprocket #35 limit chain APS sprocket roll pin
  • Compatible with LiftMaster gate operator models RSW12UL CSW24U
PRO-TBW-7523-U

Micanan 3/4HP 230V 3P Trolley Operator with Brake and Carwash Mod N4 Eyes

  • Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
  • #41 roller chain on 3/4 HP models
  • Monitored board
PCBA-PLCD10

Dyna Hoist/Pulse Replacement LCD Assembly Pulse 500 Series

SETR2641AM1.AN

Erone 1-Channel Mini Transmitter Black 433MHz

  • Heavy-duty construction
  • Heavy duty construction
  • 1 button mini remote
  • Charcoal Grey/Black
  • Unobstructed range: 820 ft (250m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
    • .......more details
K94-36891

LiftMaster Battery Wiring Harness 7AH

  • For use with various LiftMaster® Linear Actuator Residential / Commercial Swing Gate Operators
PRO-HBH-7581U-R

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
TDC48-16

LiftMaster Trolley Chain Pack #48 700LBS 16ft Door

  • Chain pack only
  • TDC48-16 is a #48 Chain Pack Kit for 16 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 16' commercial doors.
MYQ-C13ACXW

LiftMaster MYQ Indoor Camera Motion detection Night vision & 2-way talk

  • myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
  • Video camera begins recording when motion is detected.
  • Easy setup with Bluetooth and magnetic mounting base.
  • Enables secure in-garage delivery for Amazon Prime packages
  • Field of View: 140 degrees diagonal.
  • Mounting Base: Magnetic base for garage-door operator mount and hardware for wall mount.
    • .......more details
31376-2

Doorlec Sprocket 60B65 2" Bore

1104-16FT-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Dark Sandstone (DDG)

  • Sandstone rigid vinyl retainer with dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1801.77

Whiting Aluminum U-Channel 96" *** Price by Quote

  • Special order item. Price by quote only
  • For bottom seal use item 1676.96
3-5273

Serco Pusher Assembly AB1000

1-0243

RW Stay Roller 153 Galvanized

  • For use on #31 square track
GHX-311-3/4-LH

Doorlec Explosion Proof Gear Head 3/4 HP 120V 1PH ECB Left Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included
CL-516

Shaft Clip for 5/16" Square Shafts

TDC48-12

LiftMaster Trolley Chain Pack #48 700LBS 12ft Door

  • Chain pack only
  • TDC48-12 is a #48 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 12' commercial doors.
201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

41522R.S

Genie Optical Encoder (RPM Sensor) Belt/Chain Drive

  • Compatible with these Genie models that have RIDE motors (see below): 1028 1028H 2028 2028H
SUPPORT002

Manaras Board Support Rivet 0.236" Black ** Special Order Only

BL229-L-SPP-5M

Automatic Systems Round Arm Left Sol 1 16'5" (5m)

  • Highly configurable barrier designed for many applications and environments
  • Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
  • C/W BL229 Left Sol1 Round Arm 16'5 Safety Edge Red Arm Lights (2 sets of lights)
CPT210-END-KIT-U

Miller Edge Universal End Kit for CPT210

  • Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws
07-8005

LiftMaster Crank Link Barrier Gate

  • Also known as: K07-8005 G078005
  • For use with various LiftMaster® Barrier Gate Operators
BMA3

NICE Release with Lever for Newer Big Metro Ops

MA008

LiftMaster Pulley Gear Reducer 8"

  • Also known as: MA-008
  • Compatible with various LiftMaster® Gate Operators
K41-0252-000

LiftMaster Gear Reducer IHSL24UL

  • Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Gate Operators
1184HD.1

Whiting Cold Saver Hold Open Device 1184 Heavy-Duty Track Mount

  • This is a field install accessory.
  • Also known as: Positive Stop Assembly
  • This is installed onto the panel when the door is opened it is engaged and will keep the door open above the header so there is no hang down of the door.
  • The door will stay open above the header to eliminated the door being damaged.
TDC41-12

LiftMaster Trolley Chain Pack #41 1200/2200LBS 12ft Door

  • Chain pack only
  • TDC41-12 is a #41 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 12' commercial doors
BCSI-PM18

Pivin Drapeau Retaining Ring *** Price by Quote Only

BCSI-PM17

Pivin Drapeau Secondary Shaft *** Price by Quote Only

MCB-DR-SH-ASSY

Lynx Clutch/Drive Shaft Assembly MCB 3/4" x 11-3/4"

  • For trolley operator
OSH-6234-M-N1-RH

Manaras Opera-SH 1 HP 208V 3 Ph Monitored Board w/N1 Eyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
CPT215-END-KIT-T3

Miller Edge End Kit for CPT215 Doide Capacitor (T3) Configuration

  • Kit contains: 2) Caps (2) cages (1) wired plug (1) diode capacitor plug (1) non-mon. plug (2) screws
CPT215-END-KIT-T2

Miller Edge End Kit for CPT215 10K Ohm Resistor (T2) Configuration

  • Kit contains: (2) Caps (2) cages (1) wired plug (1) 10K plug (1) non-mon. plug (2) screws
  • No glue is required
CPT215-PER-FOOT

Miller Edge Field Configurable Sensing Edge Cut-to-Length

  • For do-it-yourself edges on sectional or rolling doors.
  • Black extrusion flexible PVC conductive polymer Ends: Molded polymer
  • End plugs and mounting channel sold separately.
  • Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
  • When combined with the ME123 mounting channel ideal for 2" thick surfaces
  • Minimum Length: 3ft
    • .......more details
CPT-215-50

Miller Edge Field Configurable Sensing Edge 50 ft Roll

  • For do-it-yourself edges on sectional or rolling doors.
  • Black extrusion flexible PVC conductive polymer Ends: Molded polymer
  • End plugs and mounting channel sold separately.
  • Sensing edge size: 1-5/8"H (41mm) x 1-11/16"W (42mm)
  • When combined with the ME123 mounting channel ideal for 2" thick surfaces
  • Lead Wire 12 in. 22 gauge SJTO
    • .......more details
GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
CP35

Roller Chain Puller 35-60

  • Allows chain to be pulled together for attachment of the master link
  • For 35 thru 60 chain
K41-0241-000

LiftMaster Transformer for IHSL24UL

  • Compatible with LiftMaster® IHSL24UL Series Industrial Heavy Duty Slide Gate Operators
LPEXP

LiftMaster CAPXL Loop Detector Input Board

  • Automatically trigger a phone call to a guard or office when a guest arrives
  • Mounts inside of CAPXL
  • Works with CAPXL and LOOPDETLM Plug In Loop Detector (Each sold separately.)
  • Operating Temperature -20°F to 130°F (-29°C to 54°C)
  • Dimensions: 2.8” x 2.3”
CAPXSTKPL

LiftMaster Trim Kit with Postal Lock for CAPXS

  • Trim plate with integrated postal lock cover exclusively for installing with Model CAPXS – Smart Video Intercom S
  • Pre-Wiring included for postal lock device (not included).
  • Provides a clean aesthetic installation when the application calls for a postal lock while also helping hide remnants of a previous installation
  • Dimensions: 14” x 6.5” x 1.4”
GHX-353-1HP-RH

Doorlec Explosion Proof Gear Head 1 HP 575V 3PH ECB Right Hand

  • Nema 7/9 control box
  • Electrical connections from motor to control box consists of hazardous location certified fittings
  • NEMA 7/9 O/C/S push-button station included
HD3117

Heavy Duty Slide Lock 2.85" Throw Zinc Plated

  • Mounting holes: 0.275"
19-5010-SS

Roller Chain #50 Stainless Steel w/Connecting Link 10ft Length

MA005C

LiftMaster Slip Clutch Option Mega Arm

  • This is a replacement slip clutch option for Mega Arm gearbox
041C0010

LiftMaster Chain Spreader 3/4hp

  • For use with various LiftMaster® and Chamberlain® 3/4 HP Chain Drive Garage Door Openers
GALV-250-2-L

Cut-to-Length Torsion Spring .250 x 2" Left Hand Wound Galvanized Green Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
GALV-343-258-144-L

Torsion Spring .343 x 2-5/8" x 12ft LH Galvanized Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized
GALV-243-258-144-R

Torsion Spring .243 x 2-5/8" x 12ft RH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
EMX-1915-1

EMX Single Grey Hood For IRB-MON2/4X2 1 Piece Only

  • Grey coloured metal hood (1 hood)
EMX-1916-1

EMX Single Gold Hood For IRB-MON2/4X2 1 Piece Only

  • Gold coloured metal hood (1 hood)
BEA-10LIGHT-TR

BEA Modular LED Signal Light Segment Red

  • Signal lights for industrial and vehicle flow management applications.
  • LED signal modular lights offer customizable configurations with “build-your-own” lighting elements that share a common base and bracket.
  • These LED signal units are available in red green yellow and an audible alarm cap and can be stacked in a tower configuration with up to six modules.
  • Operating temperature: -40 to 122F
  • Nema 4/IP65
  • Base sold separately
    • .......more details
User GuideDatasheet
59206

Todco Operator Bearing Shallow Header Roll Up Door

K72-12510

LiftMaster Limit Shaft Kit T commercial operators

  • Service kit for standard T commercial operators
2100-1621

Linear Belleville Washer Retaining Disc

2100-1738

Linear Drive Shaft 1" Slide Gate HSLG

VGD-RB-1/2T-10

VGD Red Beast Lever Hoist 1/2 Ton 10ft Chain ** Price by Quote

  • Compact design
  • Light weight robust construction
  • Fully machined lifting wheels
  • Grade 80 alloy load chain
  • Sealed bearings
  • Triple spur geared guarantees ef cient/reliable operation
    • .......more details
SPR410B12X1

Sprocket 410B12 x K1/4 2S 5/16-18 PH1/4

CAPXSHOOD

LiftMaster Sun Hood for CAPXS Black

  • Sun Hood exclusively for installing with Model CAPXS – Smart Video Intercom S.
  • Provides simple protection for the CAPXS touchscreen for better visibility when mounted in locations with direct sunlight.
  • Fully compatible with the CAPXSTK Trim Kit accessory and CAPXSTK Trim Kit with Postal Lock for a clean aesthetic installation.
  • Dimensions: 6.15” x 4.13” x 4.74”
GALV-273-258-144-L

Torsion Spring .273 x 2-5/8" x 12ft LH Galvanized Orange/Red

  • Wire size: .273
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-262-258-144-R

Torsion Spring .262 x 2-5/8" x 12ft RH Galvanized Red/Yellow

  • Wire size: .262
  • Inside diameter: 2-5/8"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-2-144-L

Torsion Spring .243 x 2" x 12ft LH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-243-2-144-R

Torsion Spring .243 x 2" x 12ft RH Galvanized White/Yellow

  • Wire size: .243
  • Inside diameter: 2"
  • Length: 12 ft
  • Galvanized Stenciled
GALV-273-258-R

Cut-to-Length Torsion Spring .273 x 2-5/8" Right Hand Wound Galvanized Orange/Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-363-334-R

Cut-to-Length Torsion Spring .363 x 3-3/4" Right Hand Wound Galvanized Green/White Price per Inch

  • Priced per inch - cones sold separately
  • For factory installed cones use part no. C-375-INSTALLED
GALV-262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Galvanized Red/Yellow Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
FAAC-SPEC-ORDER

FAAC Special Order Gate Product Price by Quote Only

  • Ordered to customer's specs
SETR2641AM1AN-C

Erone 1-Channel Mini Transmitter Grey 433MHz Proprietary Encoding

  • Heavy-duty construction
  • Elegant & easy to carry
  • Light grey and blue base with grey buttons
  • Unobstructed range: 656 ft (200m)
  • 60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
  • Two lithium batteries (CR2016) included
    • .......more details
Wireless System Chart
BEA-10-MINI-BRKT

BEA Mini Industrial Bracket Adjustable 6-12 "

  • Adjustable from 6 - 12 inches (up to 4" maybe cut off for shorter applications)
  • 12" x 2.5" Mounting Face
  • Fasteners NOT Included
  • Carbon Steel Black Powder Coated
Installation Guide
CGH753L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod 3/4 HP 208/230/460V 3P L5 - Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Damp Environment Modification
CHAIN050

Manaras #410 - 1R42P (Incl. 1 C/L) 21" Long

BEARING007

Manaras Flange Bearing ID 1"

  • Flange bearing for 1" shaft
OSH-6233-M-N1-RH

Manaras Opera-SH 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes Right Hand

  • An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • 25 cycles per day > 100 cycles per day
    • .......more details
Installation Manual
OPH-6112-M-N1-RH

Manaras Opera-H 1/2HP 120V 1Ph Monitored ECB and Nema1 Eyes Right Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
  • 25 cycles per hour 100 cycles per day
    • .......more details
422CBAC0

FAAC 422-115V Operator Only ** Price by Quote Only

K19-48069-NP

LiftMaster Limit Chain Assembly #48 x 69 NP

  • Compatible with LiftMaster® Model SL585U Slide Gate Operators
BCSI-PM14

Pivin Drapeau Belleville Washer ** Price by Quote Only

  • Belleville Washer acts as a spring to keep pressure on the Clutch disk
IRB-RET-KIT

EMX Industries Universal Retroreflective Photoeye Nema 4X With Hood New UL325-2018 ** To Extent of Inventory

  • Kit includes photoeye with hood reflector with hood and mounting bracket
  • Retroreflective configuration
  • UL325-2018 compliant
  • Six (6) monitoring interfaces
  • 60 ft. operating range
  • Easy installation and set-up
    • .......more details
333-042

Serco Spring (Latch Bar) ** Price by Quote Only

  • For Serco loading docks
DS200-MINI-STORE

Wayne Dalton Mini Storage Door ** Price by Quote Only

  • Mini Storage Door Made to Order
K41-0258-000

LiftMaster Idler Bracket Repl. Kit IHSL/ INSL24UL

  • Idler Bracket Replacement Kit. Compatible with LiftMaster® IHSL24UL & INSL24UL Series Industrial-Duty and Lite-Duty Commercial Slide Gate Operators