Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home
26-94322

Truck Door Bottom Panel with Seal (12" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • These panels have no routs and shipped without holes.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
  • Comes only with bottom retainer and seal (installed)
1006-1-3/8-16'

Rigid Vinyl Bottom Retainer U-Shaped 16' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
BL-12

Barlock Kit Complete for 12ft Wide Door Kit includes hardware bag

  • Kit includes hardware bag and bars (73-1/2")
Assembly Manual
MDTK

Linear MegaCode Wireless Keypad 318 MHz *** To extent of Inventory Repl. by LPWKP-G

  • Activates multiple MegaCode receivers
  • User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
  • Programming is easy via the keypad; MegaCode receiver auto-learns PIN
  • Backlit keys for easy viewing
  • Wall mounting hardware (2 screws and anchors) supplied
  • Power: 9-volt battery included
    • .......more details
Programming Instructions
CP-SH-58-1038-HDC

Lynx Complete Limit Shaft Assembly for HDC

  • 5/8" x 10-3/8"
  • Same kit used for MCJH except the HDC has 1 extra nut
9V

Battery 9V Alkaline Duracell Procell sold individually

30003

Doorlec Brake Solenoid 115V with wire leads

  • Works with all 115 Volt Doorlec Commercial and Gate operators
MK500GS

LiftMaster MiniKey Stand-Alone Keypad System ** No Longer Available

  • Self-Contained Keypad System for Door and Gated Entrances
  • 500 Code capacity
  • Grained stainless steel Surface Mount
  • Dimension: 4-1/2" H x 4-1/2" W x 3-1/2" D
  • Same as SN7000255
  • Sentex Keypad
    • .......more details
Installation InstructionsProgramming InstructionsSell sheet
LMPK3-ST

LiftMaster HID ProxKey III 1346 Key Fob Price Per Fob

  • HID 26 Bit Format
  • 125 kHz
  • Sold in Lots of 100 - Price Shown is Price per Card
  • Small enough to fit on a key ring
  • Universal compatibility with HID proximity card readers
  • Provides an external number for easy identification and control
    • .......more details
CR-2154

Raynor Replacement Photocells *** Discontinued

  • The original PEC-R3 Sensors manufactured by Raynor are no longer available.
  • The CR-2154 Sensors are the only sensors currently available to replace the original PEC-R3 Sensors.
  • Includes both the Emitter and Receiver sensors
  • Includes new sensor mounting brackets. Wires are not included.
  • These sensors are slightly different and will not mount to the original PEC-R3 sensor brackets.
  • The new CR-2154 Sensors require new mounting brackets (included) to be installed
    • .......more details
CGH101L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 1 HP 115/230V 1P L5 - Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting except when a MOD is added
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
.319-5-1/4-RH-C

Torsion Spring .319 x 5-1/4" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .319 ID: 5-1/4" Length: 12 ft
OPJ-6233-M-N1

Manaras Heavy-Duty Jackshaft Operator 3/4 HP 208V 3 Ph Monitored ECB w/N1 Photoeyes

  • An industrial operator designed for use on standard high and vertical lift sectional doors
  • Can also be used on rolling doors and grills
  • It incorporates a floor level disconnect mechanism for manual operation
  • 25 cycles per hour 100 cycles per day
  • Continuous-duty single phase capacitor start or 3 phase motor open drip proof
  • Mechanical brake
    • .......more details
.319-258-R

Cut-to-Length Torsion Spring .319 x 2-5/8" Right Hand Wound Blue/Green

  • Priced per inch. Cones sold separatly.
  • For factory installed cones order part # C-258-Installed
D400-144-1

Cable Drum Standard Lift 12' Torque Force Pair

  • 12 ft Standard lift cable drum. Aluminum die cast alloy.
  • Max. door height: 12'-1".
  • Rated lift per drum: 375 lbs.
  • Max. cable diameter: 5/32".
  • Mounting: 1" tube or solid shaft with 1/4" keyway.
  • Cross references: DM413 DNS 4-13 OMI 2100.
    • .......more details
.283-2-RH-C

Torsion Spring .283 x 2" x 144" RH Coated ** Price by Quote Only

  • Black Oxide coating
  • Wire size painted on spring
  • Wire size: .283 ID: 2" Length: 12 ft
315-KEYLESS

Micanan Wireless Keypad for PRO-315 KP303 ***NLA

  • Guardian model
ATSW

LiftMaster Light-Duty Dual-Rated Trolley Operator

  • Wi-Fi enabled – completes the LiftMaster Light-Duty product family with Wi-Fi on board
  • Built-in Wi-Fi enables access to myQ® or myQ Business™
  • Security+ 2.0®
  • Dual-sided lighting with light lenses provides superior illumination
  • Electronic limit setting for easy installation/setup
  • Compatible with myQ Accessories (827LM Remote LED Light 825LM Remote Light Control 823LM Remote Light Switch 829LM Door Monitor
    • .......more details
NO_RAILS

LiftMaster Residential Operator Head Only $20.00 reduction

PDC300-1-125-40-20-CH

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
PDC-300-075-1.25-40/75-20

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
7-6119

RW Hanger 333 Truck & Pendant Sold Individually

  • For use on 333 square track
PRO-GHW-5053U-R

Micanan 1/2HP 575V 3P Gearhead Op w/Carwas Mod N4 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
2200-938

Linear VBelt 28 4L Cogged

MGH-6533-M-N1-LH

Manaras 3/4 HP 600V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
K76-34997

LiftMaster RPM Sensor Kit for L2 L3 L4 L5

  • For use with various LiftMaster® Commercial Door Operators
41A6102-NOBOX

LiftMaster Power Door Lock Connector with 2 pins No Box

  • For Jackshaft models
620-100991

Linear Heater Kit Assembly 460V Cage Style

  • Cage style heater is suited for large post mount operators (HSLG GSLG VS-GSLG SWG VS-SWG)
GSLG-A-143

Linear Commercial Slide Gate Operator 1 HP 460V 3 Ph - Heater not Included

  • Integral APeX Controller three-button control station
  • Variable speed settings- Up to 24" per second (soft start / stop)
  • Programmable speed control
  • Direct C-face drive with brake
  • Power on/off switch
  • #50 roller drive chain and sprockets
    • .......more details
FLO2

NICE 2-btn Dip Switch Remote 433.92 MHz

  • Nice 2 Button 433.92MHz radio-control with programmable code - 1024 combinations.
  • Contains 10 DIP switches inside for coding.
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
2376.182.27.950

Whiting Torsion assembly .182 wire size 27" spring length 95" shaft

  • This is a full balancer assembly
  • Twin springs one road one curb with a shaft through it
PCBA-PLCD10

Dyna Hoist/Pulse Replacement LCD Assembly Pulse 500 Series

K26-438

LiftMaster Artisan Timer

  • For use with various LiftMaster® Speed Jack Commercial Door Operators
  • Also known as: 26-438 AB117-00121 G26438 438USA
  • The DIP switches are used to set the time delay period between 1 and 1024 seconds.
  • The timer has an internal 1 second delay opening of the DIP switches adds their corresponding value to that internal delay.
  • The switches to the right are all opened for a total delay of 1023 seconds adding that to the internal 1 second provides the full 1024 seconds.
  • Any time delay from 1 to 1024 seconds can be achieved by opening the appropriate switches.
    • .......more details
26-945215

Truck Door Intermediate Panel (11.5" x 98") for Whiting Dryfreight

  • These panels are cut to an extra wide width to fit wider vehicle applications.
  • Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
  • 3/4" thick 7 ply exterior grade medium density plywood. Primer finish
K94-36891

LiftMaster Battery Wiring Harness 7AH

  • For use with various LiftMaster® Linear Actuator Residential / Commercial Swing Gate Operators
KEYSWITCH039

Replacement key cylinder with two keys for station079

MK00810

NICE Replacement PLC Board for PRO-FDG

28-2103

Steel Bumper Extension Bracket 4"D x 20" Tall 12"W

  • 4" deep (projection) x 20" tall x 12" wide
OPH-6532-0M00

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Right Hand

  • A heavy-duty industrial jackshaft operator.
  • For use on Standard High and Vertical Lift sectional doors.
  • Can also be used on Rolling doors or Grilles.
  • Comes with a self-engaging chain hoist for manual operation.
  • Clearence: side room required 15"
OSHW-6533-1M00

Manaras Opera-SH w/Carwash Mod 3/4HP 575V 3Ph Mon ECB w/N4 Photoeyes Left Hand

  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
OSHW-6533-0M00

Manaras Opera-SH w/Carwash Mod 3/4HP 575V 3Ph Mon ECB w/N4 Photoeyes Right Hand

  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
OSHW-6113-1M00

Manaras Opera-SH w/Carwash Mod 3/4HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
CPT215-END-KIT-U

Miller Edge Universal End Kit for CPT215/223

  • Kit contains: 2) Caps (2) cages (1) wired plug (1) 10K plug (1) 8.2K plug (1) diode capacitor plug (1) non-mon. plug end plug (2) screws
  • This end cap will also work on the CPT223 extrusion
112337.0001.S

Genie Switch Assembly Interlock Expf *** Price by Quote

1222_DUAL_TROLLEY_20'

LiftMaster Additional Trolley kit for TDC operators for 20' high door includes #41 Chain for 20ft High Door Angle tracks (2x) 20' (Actual length 275") and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 20ft tracks #41 chain hardware & Round Bar 1" x 12'
  • Works with TDC12 & TDC22 Maxum operators
22DUALTROLLEY16

LiftMaster Dual Trolley Mod for TDC12 TDC22 to 16ft high **includes (TDC41-16) CHAIN PACK (10-5816) 16 FT RAILS x (11-52102) 1" Solid Shaft 12ft (DualAuxTrolley41) Hardware kit

  • Includes: TDC48-20 CHAIN PACK #41 16 FT RAILS x 1 11-5220 CRSBARROUND1" X 12' x 1 10-5820-P TRACKTROLLEYFOR 16FT DOORPRE-PUNCHED x 2 DUALTROLLEYMOD41 MOD-KITDUAL TROLLEY41 CHN x 1
MGH-6537-0M00

Manaras 3 HP 600V 3P Jackshaft monitored Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGHW-6113-1M00

Manaras MGH with Damp Area Mod (Mod081) 3/4 HP 120V Monitored Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • includes damp area modification
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MGHW-6113-0M00

Manaras MGH with Damp Area Mod (Mod081) 3/4 HP 120V Monitored Right Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • includes damp area modification
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
MT21-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Gray Left Hand Outlet Sold per Foot

  • Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
TDC1222-20

Liftmaster Comm. 20FT Trolley Angle set (10-5820-P x 2) and #41 chain pack (TDC41-20) and spacer pad (71-10324***Actual length 275"***

  • Double Angle Rails for doors up to 20'6" high
  • Includes #41 chain pack and Spacer pad part # 71-10324
PDC300-1-125-40-20

Pulse300 Direct Drive Opener 1 HP 110/240V 1ph 1.25" Shaft 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
LB410-14SF/P1

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
1-1785BL

RW Spring Bolt 514 x 2 Black

  • Housing: Cast iron 5-1/2" H x 2-7/8" W
  • Bolt: Cast iron bevelled
  • Keeper: Surface mount
  • Chain: Black 36" long with ring Finish: Black
LMEOLRES-10

LiftMaster End of Line Resistor 10K

  • For use with various LiftMaster® Commercial Fire Door Operators Gate Operators and Extended High Performance Release Devices
510.5423.00

Whiting Side Seal Upgrade for DF Door OLD 5423

  • Upgrade when purchased with a complete door
610.5600

Whiting Panel Option for 5600 HD Bottom Roller Brackets

  • This is an upgrade option when purchasing a door or bottom panel
206-5017

Blue Giant Side Weather Seal 58"Auminum/Rubber Fits 6ft Dock Set of 2 *** Price by Quote Only

  • Gaps of up to 1" (25mm) can exist between the pit wall and the dock leveler sides
  • 58" long weather seal made to fit 6ft dock leveler
OSHW-6113-0M00

Manaras Opera-SH w/Carwash Mod 3/4HP 120V 1Ph Mon ECB w/N4 Photoeyes Right Hand

  • A heavy-duty V-belt drive industrial jackshaft operator with Damp Area Modification
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
  • Solenoid activated Brake
    • .......more details
MKTG-1031-1

EMX Pastic Screw for IRB-4X2

  • Replacement screw only
PDC-300-075-1.25-40-20

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable ** Price by Quote Only

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
K41-0479-000

LiftMaster Hoist Assembly JH 700 1200 2200

  • For Maxum JHDC models only
  • Replaces previous service kit K41-0465-000
PRO-HBH-7581U-L

Micanan 3/4HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

  • 3/4 HP208V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn O/S/C (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
K41-0556-000

LiftMaster TECHNA Cabinet Door Grey

  • Compatibility: Fits LiftMaster TECHNA barrier gate operators
MYQ-D49TCXB

LiftMaster MYQ Video Doorbell

  • Best-in-class Visibility: See every detail with 2K video and a 150° lens.
  • Color night vision keeps your view sharp around the clock.
  • Motion Detection: Get real-time alerts when motion is detected.
  • Easy Setup and Recharge: Install as a battery or wired solution. To recharge remove and plug in unit.
  • Stay Connected to Your Front Door: Get alerts when a person is detected.* *Available with a Video Monitoring Plan (sold separately).
  • Extreme Weather Compatibility: Built to perform in extreme weather from -4°F to 122°F.
    • .......more details
RGHW-6214-MON-R

Manaras 1 HP 240V 1Ph Rapido Gear Head Carwash Mod Monitored ECB w/Eyes Right Hand

  • Rapido version of model OGHW
  • Includes Monitored Waterproof photocells
ME120-Y-2WIRE-R

Miller Edge Yellow 2-Wire NM Right Hand Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
ME120-Y-2WIRE-L

Miller Edge Yellow 2-Wire NM Left Hand Outlet Sold per Foot

  • Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
  • Touch sensitive signaling
  • Temperature range: -30F to 155F
  • Lead wire: 18 gauge 2ft length
  • Sensitivity: nominal 4 PSI
  • 2 wire NO configuration
    • .......more details
026-G019

Blue Giant Proximity Sensor M30 M12 Connector

  • (30mm Unshielded) Home/Lip Sensor
041-0186-000

LiftMaster LED Light Pod Kit for 87504-267 model

  • Light Pod Replacement Kit. For use with various Chamberlain® Single Lens Belt Drive and Chain Drive Garage Door Openers featuring myQ® technology and no video camera; manufactured after 2021 only.
TDC48-10

LiftMaster Trolley Chain Pack #48 700LBS 10ft Door

  • Chain pack only
  • TDC48-10 is a #48 Chain Pack Kit for 10 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 10' commercial doors.
TDC48-14

LiftMaster Trolley Chain Pack #48 700LBS 14ft Door

  • Chain pack only
  • TDC48-14 is a #48 Chain Pack Kit for 14 Ft. Trolley Rail Assemblies.
  • For use with LiftMaster® MAXUM TDC 700 Series Standard-Duty Trolley Commercial Door Operators; installed on 14' commercial doors.
MYQ-C23ACXW

LiftMaster MYQ Garage Camera Magnetic Mount Motion detection & 2-way talk

  • The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
  • It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
  • myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
  • Video camera begins recording when motion is detected.
  • Easy setup with Bluetooth and magnetic mounting base.
  • Enables secure in-garage delivery for Amazon Prime packages
    • .......more details
MYQ-C13ACXW

LiftMaster MYQ Indoor Camera Motion detection Night vision & 2-way talk

  • The LiftMaster Smart Garage Camera™ is compatible with all myQ connected garage door openers.
  • It works directly with all LiftMaster openers with the Wi-Fi logo and can work with most garage door opener brands manufactured after 1993 when paired with the myQ Smart Garage™ Hub(821LMB).
  • myQ Connected: monitor the garage through a live feed or recorded event using the myQ app.
  • Video camera begins recording when motion is detected.
  • Easy setup with Bluetooth and magnetic mounting base.
  • Enables secure in-garage delivery for Amazon Prime packages
    • .......more details
Z9962

L5 Operator Mounting Bracket

  • Compatible with L5 Jackshaft operators
  • Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
  • Precise chain tension adjustments through the adjustment bolt
  • Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
  • Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
  • Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation
    • .......more details
20111

Doorlec Cam Retainer Plate Springs *** Replaced by 26117

  • Works on GH/GHX
28412

Doorlec Flange Bearing 5/8" Bore Oilite Bushing

  • Works on GH/GHX
26130

Doorlec Hoist Shaft Threaded 5/8" x 12" GH/GHX

  • Works on GH/GHX
Z9961

Maxum Operator Mounting Bracket

  • Compatible with MAXUM® Jackshaft operators
  • Eliminates the need for a spreader arm by mounting a fixed bearing on the operator adjustment plate preventing the torsion shaft and operator from moving closer together
  • Precise chain tension adjustments through the adjustment bolt
  • Maintains parallel alignment between the operator output shaft and the door’s torsion shaft during chain tensioning
  • Operator installation is made easier by allowing the bracket to be hung on the torsion shaft via the bearing supporting its weight during fastener installation thereby removing the need to hold the operator manually
  • Has physical tick marks on both sides of the bracket and at the center of the bearing plate to indicate the torsion shaft’s center position allowing bracket to be accurately mounted prior torsion shaft installation
    • .......more details
Installation Manual
RXTA-100

Pulse 2-Channel Receiver

  • Two-Channel Receiver: Can be programmed to operate one or two doors or for Open/Close or Open/Stop functions.
  • Universally Adaptable: Works with most available brands/models of transmitters (300-390MHz) including those with rolling code.
  • 9-30Vac/dc input.
  • FCC approved.
TXTA-200

Pulse 3-BTN Transmitter 315MHZ

  • Three-Button Transmitter: Can be programmed to operate with up to three different receivers to operate up to three doors or for Open Close and/or Stop functions
  • 315mHz: Works with RXTA-100 and RXTA-200 or as replacement unit for other LM receivers with 315MHz frequency.
  • Provided with visor clip for forklifts and trucks.
  • FCC Approved
35.0245

BEA LZR-WIDESCAN Replacement Cover Only Black

  • Replacement cover for the LZR-WIDESCAN sensor
CAPXLV2MC

LiftMaster Smart Video Intercom - L

  • Designed for High-Rise Buildings and Gated Communities
  • For 50 to 50000 units multi-family buildings and garden style communities.
  • Perfect for any entrance and beyond with 4 Wiegand Input 4 OSDP Readers and 8 Relay Output to control doors gates or any other relay-controlled electrical system.
  • 10” HD touchscreen display fits in a surface flush or pedestal mount.
  • Wi-Fi** or ethernet for easier installation and connection to Cloud. 3rd party cellular modem can be used as well.
  • Wireless link to LiftMaster gate operators to eliminate the need for digging trenches at the gate.
    • .......more details
CLUTCH005

Manaras Friction Clutch 1-3/8" #50 MGH

  • For MGH 2/3/5HP
CAPXLV2HOOD

LiftMaster Hood Kit for Pedestal/Surface Mount CAPXLV2

  • The CAPXLV2 hood kit is utilized on pedestal and surface mount applications requiring the extended hood for weather element screen protection.
  • Compatible with LiftMaster® CAPXLV2 Smart Video Intercom - L Connected Access System
37520

Doorlec DC-2000 Electronic Circuit Board UL325 Requires Monitored Photocells (MUST incl. resistor)

  • Works in all Doorlec model openers except R-99
  • Input power to board is 120V
  • 24V DC available on terminals 9 & 11
  • Accessory power on terminals 1 & 11
  • 1 = Stop. 2 = Com. 3 = Open 4 = Close
  • Can be adjusted for constant pressure
    • .......more details
OGH-6112-MON-LH

Manaras 1/2 HP 120V 1Ph Gear Head Operator Monitored ECB Left Hand

  • A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
  • Includes a self-engaging chain hoist for manual operation
  • 25 cycles per hour 80 cycles a day
  • Hoist on right side standard can easily be moved to the left in field
  • Full overload protection
  • BRACKET112 must be used for wall mounting
    • .......more details
27121-480V

Doorlec Electric Motor 1-1/2 HP 480V 3PH DC223C

27121-600V

Doorlec Electric Motor 1-1/2 HP 600V 3PH DC223C

026-122

Blue Giant Heater Element **Special Order

  • Price by Quote Only
14128

Doorlec Hoist Disconnect Lever GH/GHX

SA1929/A18

Automatic Systems Feig Double Channel Loop Detector BL229

  • For AS1620 BL229
GRX-40X13-134-WTE

Thermal Window Clear 40" x 13" for 1-3/4" Garex Door White Frame

  • For 1-3/4" thick door
E/1929/025

Automatic Systems Bumper and Limit Switch Ass'y (BL229)

  • Used on the BL229 gate op.
PRO-HBH10021U-L

Micanan 1 HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand (Pro-HHD)

  • 1 HP230V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
  • Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
  • N-1 Through-beam (MK-00649) photocells included. Other options available.
  • 3-btn o/s/c (02-103) wall control station included
  • Adjustable Friction Clutch 5L320 drive belt
  • #50 Roller chain 18 tooth door sprocket included
    • .......more details
MGH-6236-1M00

Manaras 2 HP 208V 3P Jackshaft Monitored w/N1 Eyes Left Hand

  • A very heavy-duty worm gear industrial operator designed for use on Industrial standard high and vertical lift sectional or rolling doors and grilles.
  • It incorporates a chain hoist for manual operation with a floor level engaging device with electrical cut-out
  • Electrically activated drum-band type solenoid brake
  • Full overload protection
1326-112-BLK-PLEXI

Elton Commercial Window 1-1/2" thick 1326 Black Frame Sealed Plexi Glass

  • Screw together window kit
  • Frame size: 26-1/8" x 13-9/16" (Tip to Tip)
  • Cut-out size: 25-1/16" x 12-9/16"
  • Vision area: 23-7/16" x 10-13/16" Corner Cut 4" Radius
  • Different glass options and frame colours are available upon request
1801.77

Whiting Aluminum U-Channel 96" *** Price by Quote

  • Special order item. Price by quote only
  • For bottom seal use item 1676.96
1676.98

Whiting Bottom Seal 96" for 1801 U-Channel ** Price by Quote

  • Special order item. Price by quote only
1104-16FT-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Dark Sandstone (DDG)

  • Sandstone rigid vinyl retainer with dark sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe