Devanco Canada - Get The Right Garage Door Opener‎ and Parts

ME00057

Micanan Clutch Shaft Only for PRO-APT 3/4" x 12-3/4"

For model PRO-APT

MD00327

Micanan Sprocket 50B15 x 1" 1/4" KW 2SS

.295-334-L-C

Cut-to-Length Torsion Spring .295 x 3-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

.262-2-L-C

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

27-48-180

Extension Spring 8' Door - 180 lbs Gold

Loop ends
27" long 48" stretch 180 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

PPLV1-100

LiftMaster Passport Lite 1-Button Visor Remote with Sec+ 2.0 Technology 100/PKG

Passport Lite Remote Controls provide cost-effective single button access solutions for gate access only or high-capacity commercial properties applications such as employee parking lots and tenant garages.
These remote controls are specifically designed for gate access control and are not compatible with LiftMaster Garage Door Openers.
2x the range of standard remote controls
Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
Compatible with LiftMaster® commercial receivers (850LM 860LM PPWR STAR1000) and Security+ 2.0™ Gate Operators
Sold in a 100 pack

.......more details

Programming Instructions Instructions de programmation Sell sheet Brochure

84284

Marantec Logic Board for Non-EOS Models

For use on M Line- M-4500 and M-4700 models.
For use on Q Line - 7500 and 7700 models.
For use on Martin DC 3500E and DC 3700E models.
Replaces 8054216. Special programming needed. Instructions included

MA116RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 17 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe

Additional arm accessories

V4564-BL-W

Vinyl Seal 4" Bottom Bead End 1/8" Bead Black - sold per foot

.468_6"-LH

Torsion Spring .468 x 6" x 12ft LH Blue/Orange. **NLA

Wire size: .468
Inside diameter: 6"
Length: 12 ft

.262-2-5/8-RH-C

Torsion Spring .262 x 2-5/8" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .262 ID: 2-5/8" Length: 12 ft

.363_5-1/4"-LH

Torsion Spring .363 x 5-1/4" x 12ft LH Green/White

Wire size: .363
Inside diameter: 5-1/4"
Length: 12 ft

LB810-24

Laminated Bumper Standard Black 10" x 24" 8" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

.306_3-3/4"-RH

Torsion Spring .306 x 3-3/4" x 12ft RH Red

Wire size: .306
Inside diameter: 3-3/4"
Length: 12 ft

EP2987

Exhaust Port 6" with latch long barrel ** Discontinued

6" inside diameter 2" sleeve with latch.
Includes fasteners & gaskets.

MA013

LiftMaster Shear Pin #6 (Standard)

For barrier gate operator models: MADCBB MATDCBB MASDCBB & MASTDCBB
Use Shear Pin #7 ( MA0137 ) if hole shows sign of wear

.306-334-L

Cut-to-Length Torsion Spring .306 x 3-3/4" Left Hand Wound Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

41A8094

LiftMaster Residential Door Arm Kit Straight and Curved Arms

Kit contains: Straight arm Curved arm and hardware bag

.283-134-R-C

Cut-to-Length Torsion Spring .283 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

BK002

Residential Top Bracket Low Headroom Sold Individually

Bright zinc plated 10-gauge steel
3/8" roller offset

PRO-T-5081-U

Micanan 1/2HP 208V 1P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

041-0189-000

LiftMaster Dual Light Pod Kit No Camera Model

Dual Light Pod Replacement Kit
For use with various LiftMaster® Belt Drive and Chain Drive Garage Door Openers featuring myQ® technology dual light lenses and are not equipped with a video camera; manufactured after 2021 only
This replacement kit is compatible with the following models: 84501 84501-267 84602

CP-IDLER-ASSY-MR

Lynx Front Idler Assembly Chain TC3

90-B

Micanan Keyway 5/16" x 3" Long (Reducer BHC 80) for 2 3 HP

CS303-FP-50

EMX Car Sense Direct Burial Sensor Flat Pack 50ft ** Replaced by LRS-FP-50

Lead probe ONLY. Requires the CS303-C-1 detector.
Easy installation above or below ground
Ignores cross traffic in tight spaces with DETECT-ON-STOP™ feature
Sensitivity display
Single cut installation with flat pack model

MK-00030

Micanan Transformer 115V-24V-40VA

PED72

Pedestal Post 72" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with a 6 in. center radius giving a tight professional look

DBE-10

Molded Rubber Bumper Black 10" L x 4 1/2" W 3" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
10" L x 4 1/2" W 3" Projection

.......more details

5464.96

Whiting Top Seal Coldsaver 96" L 2-3/16" W

111-0061

RW Box Track #33 Black 10ft

Finish: Black enamel

K72-12509

LiftMaster Output Shaft Kit (3/4 & 1 HP)

For commercial operator model T
Complete with: Output Shaft Bearing Roller Chain with Master Link Limit Chain Shim Washers Roll Pins Push Ring 3/4' and Sprockets (41B32 & 48B10)

41D8198

LiftMaster End Panel with all Labels and Light Socket

End panel works with various models

831-R

Allstar 1-Door O/C/S Receiver 107480 318 MHz ** To Extent of Inventory

Three channels - three relay outputs
Textured aluminum case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

27-20300

Truck Door Cable Drum Roadside (LH) for Todco Roll-Up Doors

Cast aluminum construction
Large die cast cable drums are grooved to prevent cables from binding or wearing prematurely.
Angle of cable slot determines left or right drum.
Holds up to 130" door cable
Cross Reference: T #59033-2 T #59129-2 W #4014 330000

PRO-GT-15043-U

Micanan 1-1/2HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

GALV-363-334-144-L

Torsion Spring .363 x 3-3/4" x 12ft LH Galvanized Green/White

Wire size: .363
Inside diameter: 3-3/4"
Length: 12 ft
Galvanized Stenciled

MK-00050

Micanan Overload Reset 3-Phase 2.6 - 3.7 Amps

T751L5

LiftMaster 3/4 HP 115/230V 1P Commercial Trolley Operator Logic 5 *** No Longer Available

Trolley low profile with brake
Suspended from the ceiling the operators are used on sectional overhead doors with standard lift.
T operators are directly attached to drive and control the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

Installation Manual Manuel d'Installation Sell sheet Brochure

H753L5-LH

LiftMaster Ind. Duty Hoist Op. 3/4 HP 208/230/460V 3P Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

.234_2"-LH

Torsion Spring .234 x 2" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2"
Length: 12 ft

41A6348-3

LiftMaster Cover RJO

Same as 41A6348-1

MP-00002-110V

Micanan Apartment Feature: Timer-to-Close Function and Light Control Modification only

Controlling action of two lights- sockets supplied on cover

XP4040CUSH689

Heavy Duty Door Closer

Heavy Duty Door Closer with Spring Cush-N-Stop Arm

510.5377.00

Whiting Side Seal Option for Dry Freight Door

A extra option when ordering a Dry Freight door
When purchased alone use part number 5377.115

K1D8284-1CC

LiftMaster Main Drive Board 1 Ph (SL585U SL595U)

GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

ETBH-383-3/4HP

Doorlec 3/4HP 208V 3P Trolley Door Opener with solenoid brake

Trolley model heavy-duty door operator designed to provide smooth dependable operation of sectional overhead type doors.

K74-30763

LiftMaster Plug-In Transformer 120VAC ****Discontinued Use APOW3

120VAC 50-60Hz 36VDC 1.1A Output
Used on the LA400
Discontinued in 2018 use APOW3 instead

CB18B0500

Cable 1/8" 7x19 500' Galvanized

Galvanized Cable 1/8" 7x19 500ft spool.
Cable break strength: 2000 lbs

Comparison charts

CBI-087

Wheel Chock CBI-087 Cast Ductile Iron

Cast Ductile Iron for Impressive Strength
Painted Yellow for High Visibility
Size: 8-1/4" wide x7-1/4" long x 8-1/2" high

25E10270

Truck Door Shaft Cover for Bottom Roller Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Attaches to bottom panel for roller support
Shaft cover for 1 stud
Cross Reference: W #1021

41A3504-1

LiftMaster Antenna Kit with Adapter

Designed to work with the 433MHz receiver logic boards
Kit contains: Antenna Coaxial cable adapter and antenna bracket

ALUM-525

Aluminum 24" x 100' Spool Black / Noir # 525

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 525
Reverse side is #431 Bright White

Colour chart

70.32

Whiting Stainless Steel U-Bolt 1-1/4"

Sold per U-bolt

2705.192_340

Whiting Curbside Torsion Spring 2-3/16" ID 34" Long

Torsion spring wire only
.192 wire size

20113R

Genie Limit Switch Screw Drive

For use on Genie screw-drive openers.
Compatible with ALL Genie Screw and Trac Drive garage door openers with standard rail assemblies
Replaces either the UP or the DOWN limit switch
Replaces Genie Genius Trac Drive limit switch models 19795S and 22785R
Not compatible with excelerator models

50690

Doorlec Clutch Assembly for ETBH

PRO-GH-7511U-R

Micanan 3/4HP 115V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

Z9206

Door Track Anvil

Used as a pounding block to hammer mangled track back into shape
For 2" track

744

Fasteners Pan Head Tek Screw 3/4" long #8 Head 1000/Box

8 x 3/4 Pan Socket Tek Zinc

41D0216-2

LiftMaster End Panel with Light Socket

Compatible with LiftMaster® 8550WL & 8360WL Models; and various garage door openers manufactured after 2017 only
Circuit board not included

2376.156.19.780

Whiting Torsion assembly .156 wire size 19" spring length 78" shaft

1014-1-5/8-14'

Rigid Vinyl Bottom Retainer Notched 14' Long

Black - for door thickness of 1-5/8"

41D0233-3

LiftMaster End Panel WiFi Logic Board

.306_6"-LH

Torsion Spring .306 x 6" x 12ft LH Red

Wire size: .306
Inside diameter: 6"
Length: 12 ft

MX00147-NEW

Micanan Complete Clutch Kit for PRO-TB New Style Frame (MX00211)

After January 2006
8" Diameter pulley
Feb 2017 - new part number MX00211

STATION086

Manaras 3-btn Push-Button Control Station Nema 1 Flush Mount

2 N/O contacts and 1 N/C contact for stop.
Flush mount.

MG00019

Micanan Flat Washer 13/16" ID x 1.5 OD (3/4" Shaft Size)

PRO-H/HB operator parts
2 required per operator

MU22-2WIRE-U-GRY

Miller Edge MU22 2-Wire Universal Gray - Sold per Foot

��Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

GALV-295-258-144-L

Torsion Spring .295 x 2-5/8" x 12ft LH Galvanized Blue

Wire size: .295
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

.343_5-1/4"-RH

Torsion Spring .343 x 5-1/4" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 5-1/4"
Length: 12 ft

CP-MO-12-115/1

Lynx Electric Motor 1/2 HP 115V 1 Ph *** NLA

Electric motor only

LVB620-11SF

Steel-Faced Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

D-22A

Linear 1-Channel 1-Button Handheld Transmitter ** Available to extent of inventory

Removable wall mounting clip
Standard digital format: 256 selectable codes
Powered by one 9-volt battery (included)
Current consumption: 12 mA transmitting
RF frequency: 303.875 MHz
Dimensions: 2.16" W x 3.75" H x 0.88" D Order number: SNT00016

.......more details

CH755L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 575 VAC 3 Ph Logic 5 Right Hand ***Replaced by CRBH755L5-RH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes

Installation Manual Manuel d'Installation Sell sheet Brochure

91568

Marantec Sprocket Holder Assembly for Chain Rail *** NLA No Replacement

Compatible with Marantec Chain Standard Rail.
Same as #8030339 (old part number)

LIMIT006

Manaras Single Micro Limit Switch with Flat Lever

Fits old medium-duty Manaras operators such as MDJ
SPDT - Cherry

Limit Switch Chart

RN1327

Roller 2" Nylon 7" stem 13 ball White Sold per Roller

White Nylon Roller Wheel Diameter: 2"
Working Length: 6.62" Overall Length: 7.59"
Box qty: 100 Box weight: 44.8 lbs (2-7-13 White Nylon)

RESET010

Manaras Resettable Overload Fuse 13A 1 Phase

28103

Pillow Block Bearing Cast Iron 1" Bore

733T

Allstar 3-btn 3-Door O/C/S Transmitter 107477 318 MHz *** Replaced by P-733T

Open/Close/Stop remote for 3 doors
Compatible with 3-channel Allstar and MVP receivers
Stationary mounting
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

Programming Instructions

BRAKE013A

Manaras Band Brake Assembly Kit OSH Nema 4/12

Installation Manual

210272

Skylink Belt Gear for Atoms Operators

Plastic Gear
Fits Atoms / Atoms+ / Atoms Pro (AT & AN) Series

.225_2"-LH

Torsion Spring .225 x 2" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 2"
Length: 12 ft

1005-1-3/8-24'

Aluminum Bottom Retainer U-Shaped 24' Long *** 24' is DISC

For door thickness 1-3/8"

71-B575H

LiftMaster Interior Brake Kit with Cable 575V (Logic 3 4 and early 5 Disc and Pad Models)

Interior mount brake kit for operation with chain hoist
Includes solenoid

Instruction Manual

124772

Roller 3" UHMW Plastic 7-1/4" Stem Sealed Bearing

.406_3-3/4"-LH

Torsion Spring .406 x 3-3/4" x 12ft LH Blue/Yellow

Wire size: .406
Inside diameter: 3-3/4"
Length: 12 ft

SN1600341-K

LiftMaster Sentex Bypass PCB for TAC1 EL25

BY PASS Board for 1150051
Same as KSN1600341B

ME112-R

Miller Edge Black 2W Non Monitored RH Outlet 1-5/16" wide x 1-1/2" high Sold by the Foot

Slide in edge designed for commercial sectional doors and gates.
Retrofits easily to 1" to 1-1/4" sectional doors
Touch sensitive signaling allows for immediate stopping/reversing of motion
For sectional doors: measure the daylight opening of the door or measure the panel width of the door
This gives you the "active length" of the edge - the length to order
Lead wire: 22 gauge univversal

.......more details

Installation Manual Worksheet Sell Sheet

MJ00001

Micanan Brake Shoe - Left **No Longer Available**

Only available in complete kit # MJ00013 or MJ00014 for PRO-GH

271723

Rolling Steel Slide Bolts for Bottom Bar D679

10.1002.23

Truck Door Rivet with Splines 1/4" x 1-1/32" Stainless Steel

Stainless steel construction
Round head design 11/16" head

2G-LEFT

Rolling Steel 2" Curved Stamped Endlock Left Hand

Endlocks are riveted to curtain slats ends of every other slat to prevent slats from shifting laterally and to prevent curtain wear in guides.
Continuous endlocks are at both ends of every slat.
Rivets included with endlock

HSC-600-B

Bench Swager 1/16" - 3/16"

Swages 1/16" 3/32" 1/8" 5/32" or 3/16"
Wire rope cutting capacity 3/16”
Made in Japan

1005-1-3/4-14

Aluminum Bottom Retainer U-Shaped

For door thickness 1-3/4"

.312-5-1/4-LH-C

Torsion Spring .312 x 5-1/4" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 5-1/4" Length: 12 ft

1006-1-3/4-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

Black with flexible fin to touch door face.
For door thickness 1-3/4"

CP-CRG-OLD

Lynx Auto Re-Connect Carriage 20-1/2" Arm Sold Separately *** Discontinued

Will work on most brands of commercial trolley operators using 2" angle tracks.

.312-5-1/4-RH-C

Torsion Spring .312 x 5-1/4" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 5-1/4" Length: 12 ft


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login