Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Commercial Door & Gate Operator Accessories Vehicle Detection & Safety Acc. (Photocells) Pneumatic Edge, Treadle
50-106

Take-Up Reel 2-Wire Metal 18-ga 20ft

  • 18-gauge
  • 20 ft extended
  • Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
  • Also called Reel cord
50-101-2

Exterior 3-Wire Air Switch SPDT with Plastic Housing Mosley

  • Nema 4
  • 3-wire air switch; 1-NO and 1-NC contact
  • Mosley
  • NO contact on Yellow and Green
655202

LiftMaster Pneumatic 14' Sensing Edge with 2-Wire Take-Up Reel

3001-0

Signal Tube Treadle Hose Black Sold per foot

  • Applications: for gas stations and apartments
  • I.D. : 3/8"
  • Also known as Drive Over Hose.
MWTA12B

Miller Edge Transmitter with Low Battery Alarm Small

  • The transmitter comes standard with a NEMA 4 weather-proof enclosure
  • Compact design that allow for easy troubleshooting.
  • The transmitter has an audible alarm that activates when the battery has 25% of its life remaining
  • Easy to configure · Non-monitored system ideal for operators manufactured prior to: · Doors: August 2010 · Gates: January 2016 · NEMA 4 transmitter built to endure rugged environments
  • Power Source: (2) 1.5 volts AA lithium batteries
  • Input: 2-wire N.O. sensing edge
    • .......more details
Installation manualSpec sheet
REEL-20

Devanco Take-Up Reel 2-Wire Metal 18-ga 20ft Black

  • 18-gauge
  • 20 ft extended
  • Take up reels are NOT recommended for use with any failsafe type edge. Use coil cord only.
  • Also called Reel cord
  • Comes with reset button for CSA conformity
50-104-1

Black Coil Cord 2-Wire 18-ga 20 ft. Extended Curly Cord

  • Retracted Length=4 Feet Extended Length=20 Feet 2 Wire 18 Gauge Cord Type SJEO
50-107-30

Take-Up Reel 3-Wire Metal 30ft Extended

  • 3- wire 18-gauge
  • Also called Reel Cord
50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

3002-200FT

Gum Hose 1/2" ID 200' Spool

  • 1/2" inside diameter
  • Installed in bottom "U" rubber for use as a safety edge
RP-3002

Rubber Plug 1/2"

  • To plug end of 3002 gum hose
655302

LiftMaster Pneumatic 22' Sensing Edge with 2-Wire Take-Up Reel

MWR22B

Miller Edge 2-Channel Wireless Edge Receiver RF 318 MHz

  • Power source: 12-24 volts AC/DC nominal Nominal 60 mA 140 mA activated
  • Output: N.O. N.C
  • Wire connections: Integral 18” wiring with #6 spade lugs
  • Antenna: Attached wire or F connector
  • LED Indicators: Power channel 1
  • Polycarbonate enclosure
    • .......more details
AIRSWITCH007

Manaras Exterior Adjustable Air Switch SPDT

  • To be used with metal case part # AIRSWITCH008
50800P

LiftMaster Treadle Protection Plate **discontinued

50800

LiftMaster RBMA Electric Treadle Nema 4/12 5ft long

  • Five feet long.
  • OPEN only (all LiftMaster operators) or SAFETY only (LiftMaster operators with type B2 C2 L2 T T1 or TS control wiring) after vehicle passes over treadle.
  • The weight of the vehicle compresses an electric switch which sends an open signal to the door.
  • Requires a 2-wire connection to the operator but does not require power to function
50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

MWT12B

Miller Edge Transmitter Binary Nema 4 Enclosure

  • The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
  • It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
  • The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
  • The gate or door stops movement and will then reverse the direction of travel.
  • Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
  • Response time: 70 milliseconds
    • .......more details
Installation Instructions MWT12BSpec Sheet MWT12BFAQ MWT12B
AIRSWITCH008

Manaras Metal Case for AIRSWITCH007

MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

  • For 2-wire edges
  • Was previously MWRTA02A now has a new board making installation easier
  • Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
  • This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
  • The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.