Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Garage Door Opener Parts
41181R.S

Genie Main Control Board Kit 6070H 6170HB

  • Primary electrical and logic interface for Genie's 6070 and 6170 Garage Door Openers
  • DOES NOT include the Genie Aladdin Connect Control Board #41153R
050DCTBLK

LiftMaster Receiver Logic Board DC. WiFi Bluetooth Enabled Lock Capable 315MHz

  • This is 315MHz Security+ 2.0® Lock Capable Receiver Logic Board featuring Wi-Fi® and powered by myQ®.
  • For use with various LiftMaster® DC Chain or Belt Drive Garage Door Opener models; manufactured after 2017 only.
  • The unit will feature a yellow learn button and two lock terminals
  • Replaces 050DCTWFLK backwards compatible
  • Integrated Bluetooth technology will make it faster and even easier to connect to myQ®
  • Improved opener battery life with increased door usage when operating during a power outage on battery backup mode.
    • .......more details
370-3343

Stanley Magnet Assembly for Quiet Glide

24856

Stanley Front Idler Kit for Chain/Cable Openers *** NLA

  • For Stanley Chain/Cable Openers Only
  • Not for Stanley Full Chain Openers
  • Replaces Part #920-0147
041000

Surge Protector1080 Joules UL Listed (041008)

  • Woods surge protector
  • Full 3 line protection
  • Electrical rating – 15 A 120 VAC 1800 W
  • Voltage protection – L-N: 400V L-G: 500V N-G: 400V
  • 900-1500 Joules surge protection
  • Max Surge protection – 6000 V
    • .......more details
CR-2154

Raynor Replacement Photocells *** Discontinued

  • The original PEC-R3 Sensors manufactured by Raynor are no longer available.
  • The CR-2154 Sensors are the only sensors currently available to replace the original PEC-R3 Sensors.
  • Includes both the Emitter and Receiver sensors
  • Includes new sensor mounting brackets. Wires are not included.
  • These sensors are slightly different and will not mount to the original PEC-R3 sensor brackets.
  • The new CR-2154 Sensors require new mounting brackets (included) to be installed
    • .......more details
95358

Marantec Front Idler Assembly

  • Complete Roller holder assembly for ML-Series rails
  • Used for belt and chain drive opener rails
  • Same as # 8030432
41176R

Genie Shaft Assembly Kit 6070/6170

27091A

Genie Limit Worm Gear for PMX500

  • Limit worm gear sits in the Limit switch plate and works with the Limit Worm Drive to activate the limit wheel
  • Works With Genie Models PMX 500-IC/B IC250/B
37557R

Genie Chain Drive Bullet Assembly

  • This Genie chain drive bullet assembly is the white piece that holds the chain for the garage door opener together.
  • Works with chain model Genie garage door openers that have a C-Channel rail.
  • The chain carriage assembly for these models also attaches to this chain bullet assembly allowing it to move the garage door open and closed up and down the rail.
  • Assembly contains: The 2 Bullet side white pieces and the four screws to install it
  • Compatible with Genie models that have a chain rail: 1028 2028 3020H 3020H-B 3024 4024 3022 3042 3120H 3120H-B 4022 4042 4124 4164 (ChainMax ReliaG IntellG and TriloG series with these model numbers)
36045A

Genie Helical Gear 2040L

  • Helical gear assembly for the Genie #2040L garage door opener.
  • Same as: 36045AS 36045. 36045A 36045S
  • Includes: Helical and limit gear screws clips and small tube of grease.
39360R.S

Genie Optical Encoder Assembly for Belt/Chain Drive

  • Compatible with many of the newer Genie chain and belt drive openers.
  • New DC Optical Encoder Assembly for Chain and Belt Drive Garage Door Openers.
  • Also Compatible with Overhead Door Odyssey Series #7030 and Destiny Series #8030 Chain and Belt Drive Garage Door Openers.
27222A

Genie Sprocket Bushing *** To extent of Inventory

  • For Genie Chain Drive or Belt Drive Channel Rails.
  • Fits the following models: PMX700 PMX1200 GPS00-IC GPS1200-IC
  • Available to extent of inventory
39153R.S

Genie Optical Encoder AC Screw Drive Models

  • Compatible with models; 2562 2564 2568 PowerLift® GPower 900
  • Also called the RPM sensor it is used to resolve the issue of short travel problems or drifting limits on the garage door opener.
  • Single & Dual encoder
20449R

Genie Chain Glide Rear Housing Cover

  • Compatible with models: PCG400 PCG450 PCG500ML PCG600 PCG700ML PCG700FN GCG350L GCG350ML H2000C 1020L 2020L
  • Contains gear housing cover only
38877R.S

Genie Non-Configured Circuit Board

  • Replaces the following models: 38001R1.S 38001R2.S 38001R3.S 38001R4.S 38513R.S 38514R.S 37470R1.S 37470R2.S 37470R3.S 37470R4.S 38334R1.S 38334R2.S 38334R3.S 38334R4.S
  • Compatible with Series II Controls and comes with only the circuit board
  • In order for this kit to function properly it is important that customers know the model of their opener.
  • If unsure as to what resistor needs to be remove refer to the instructions that came with the unit
36645R

Genie Screw Drive Coupler

  • This coupler only works on the following models manufactured after June 2011.
  • TriloG 1200 (3064) TriloG 1500 (4064)
  • PowerMax 1200 (3062) PowerMax 1500 (4062)
  • GPower 900 (2564)
  • Powerlift 900 (2562)
38123A

Genie Powerhead Mounting Flange

  • Mounting bracket connects the powerhead to the rail assembly.
  • A tongue on the flange fits into the bearing block assembly on the rail to keep it in place.
  • Fits TriloG PowerLift GPower and PowerMax Operators
37561S.S

Genie Belt and Bullet Assembly 8ft

  • For use on 8 ft doors
  • Compatible with the following:
  • SilentMax 1200 (Model 4042) 1000 (Model 3042) 750 (Model 3055) 550 (Model 2055)
  • ReliaG 650 (Model 1028) 850 (Model 2028)
  • IntelliG 1000 (Model 3024)
33223A

Genie Bushing

  • Drive shaft bushing on PMX500 Chain Glide