Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Radio Controls Linear Corp
WOR

Linear Wiegand Output Receiver 318 MHz

  • Designed for use as an access control interface for Linear’s block coded digital transmitters.
  • The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
  • Ideal way to facilitate handicapped access
  • Multi-button transmitters can double as personal emergency devices for triggering security alarms
  • RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
  • Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding
    • .......more details
DR

Linear 1-Ch DR3A Delta3 Receiver 310 MHz

  • 310 MHz frequency 8 dip switches for coding 256 possible codes
  • 24V AC/DC input power 3 terminal connection
  • Activates one device
  • Dimensions: 5.5" W x 4" H x 1.25" D
  • Same as: DNR00001
Installation Manual
MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

  • MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
  • It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
  • Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
  • Features Include:
  • Internal antenna
  • 1-6 digit PIN for each user
    • .......more details
Installation Manual
ACT-31B

Linear 1-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz (ACP00879)

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Power: Two CR2016 batteries incl.
  • Codes: Factory block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.25" W x 2.25" H x .48" D
    • .......more details
Programming Instructions
308911

Linear 1-Channel Multi-Code Visor Transmitter 300 MHz

  • Compatible with 300 MHz Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Installation Manual
DT4A

Linear 4-btn Delta3 Transmitter 310 MHz (DNT00027B)

  • Activates one four-channel receiver (DR4) two 2-channel receivers (DR2) or four single-channel receivers (DR DRQP or DRM).
  • Can also be used as remote UP DOWN STOP control for commercial operators with DR-4 receiver.
  • 8-dip switch 64 selectable codes
  • Same as: DNT00027B or DT4A
  • 310 MHz frequency
Programming Instructions
DT

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by 8 dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
MDR/U

Linear 1-Channel MegaCode Universal Plug-In Receiver 318 MHz

  • Makes any garage door operator compatible with MegaCode transmitters
  • Simple plug-in design
  • Easy to install - one connection using two-conductor wire
  • Memory: storage for up to 10 MegaCode transmitters
  • Normally open contact activates for 0.5 seconds
  • Power: 110 VAC +/- 10% 60 Hz
    • .......more details
NMTK

Linear MegaCode Wireless Keypad 318 MHz Grey

  • Wall-mountable backlit NMTK is a wireless MegaCode keypad
  • Requires: 3 AAA batteries for power
  • It can activate multiple MegaCode Receivers including Linear GDO’s and APeX equipped Gate Operators
  • User-selectable 1 to 6 Digit/Letter PINs
  • Programming is easy via the keypad; MegaCode receiver auto-learns PIN
  • Blue backlit keys for easy viewing
    • .......more details
Installation Guide (EN/FR)
DTKP

Linear Delta-3 Wireless Keyless Entry 310 MHz

  • Activates multiple Delta-3 receivers
  • 1-8 digit PIN
  • Backlit keys for easy viewing
  • Mounting hardware supplied
  • Power: 9-volt battery
  • Codes: 256
    • .......more details
Programming instructions
MTS3

Linear Megacode 3-Ch Visor Transmitter 318MHz (DNT00093)

  • Operates up to 3 garage doors
  • Easy to add/remove programming
  • LED light confirms battery power
  • Requires one (1) CR2032 coin-cell battery (battery included)
  • Includes Visor Clip
  • Ergonomically designed
    • .......more details
Programming instructionsInstructions de programmation
308913

Linear 1-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 (set by dip switches)
    • .......more details
Programming Instructions
108210

Linear 1-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close mini remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
MINI-T

Linear 1-Channel Delta3 Key Ring Transmitter 310 MHz (DNT00026)

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Key ring not supplied
  • Power: 12 V battery
  • Frequency: 310 MHz
  • Codes: 256 (set by dip switches)
    • .......more details
Programming Instructions
109410

Linear 2-Channel Multi-Code Visor Transmitter 310 MHz

  • Open/Close remote for 2 doors
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Supplied with visor clip
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 9-volt battery
  • Codes: 1024 per channel (set by dip switches)
    • .......more details
Programming Instructions
308301

Linear 2-Channel Multi-Code Key Ring Transmitter 300 MHz

  • Open/Close remote for 2 doors
  • Compatible with 300 MHz Multi-Code receivers and Model 109950 and 302850 receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 codes for each channel (set by dip switches)
  • RF frequency: 300 MHz
    • .......more details
Programming instructions
DT2A

Linear 2-btn Delta3 Transmitter 310 MHz (DNT00017A)

  • Activates two Delta-3 receivers independently
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
AP5

Linear MegaCode Wireless Access Controller 318 MHz

  • Ideal for gated communities parking facilities and industrial sites
  • Easy to set-up and use up to 480 remotes can be programmed with a few keystrokes
  • Easy to add suspend and delete transmitters through programming mode no transmitter dipswitches to set
  • Supports 480 block coded transmitters or 238 individual transmitters/wireless keypad entry codes
  • Supports up to six fully supervised safety edge transmitters
  • AP-5 replaces Linear's AP-4; AP-5 available for replacement of existing AP-4 units only
    • .......more details
Programming Instructions
ACT-34B

Linear 4-Channel Block Coded MegaCode Key Ring Transmitter 318 MHz

  • Compatible with all Linear access receivers and controllers
  • Supplied with quick-disconnect key ring
  • Power: Two CR2016 batteries incl.
  • Codes: Factory block coded in MegaCode format
  • RF frequency: 318 MHz
  • Dimensions: 1.25" W x 2.25" H x .48" D
    • .......more details
Programming Instructions
109950

Linear 1-Channel Multi-Code Gate Receiver 12-24V

  • Operates on 12-24 volts AC or DC power
  • One channel
  • Whip antenna
  • 3-foot antenna coax and bulkhead connector
  • Codes: 1024 (set by dip switches)
  • RF frequency: 300 MHz or 310 MHz (jumper selectable)
    • .......more details
Programming Instructions