Devanco Canada - Get The Right Garage Door Opener‎ and Parts

.375-334-R

Cut-to-Length Torsion Spring .375 x3-3/4" Right Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.375-334-L

Cut-to-Length Torsion Spring .375 x3-3/4" Left Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.343-514-L

Cut-to-Length Torsion Spring .343 x 5-1/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-525-INSTALLED
If cones are required a filler must be added use part # FILLER

.207-134-R

Cut-to-Length Torsion Spring .207 x 1-3/4" Right Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

DM28VL-125

Cable Drum Vertical Lift 28' 1350-28 (1-1/4") Pair

28' Vertical Lift aluminum die cast alloy for 1-1/4" shaft.
3/8"-16 x2" hardened cup point set screws installed with red heads. -
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH.
Max. Door Height: 28'-1".
Rated Lift per Drum: 1100 lbs.
Max. Cable Diameter: 1/4".

.......more details

LVB420-11SF/P1

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

19-41HL-NP

Half (Offset) Link #41 Nickel Plated

For #41 chain

SMT7000TP5

Telco Thru Beam Transmitter DC M18 5M Cable

Supply Voltage: 10 - 30 V dc
Light Source: Infrared (880 nm)
Control Feature: Test Input
Sensing Range: 20 m
Housing: M18 x 1 Plastic
Connection: 5m cable

.......more details

19-40HL

Half Link #40

Half link for #40 chain
ANSI Standard Carbon Steel

GALV-306-258-144-L

Torsion Spring .306 x 2-5/8" x 12ft LH Galvanized Red

Wire size: .306
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized Stenciled

GALV-283-2-144-R

Torsion Spring .283 x 2" x 12ft RH Galvanized White

Wire size: .283
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-283-2-144-L

Torsion Spring .283 x 2" x 12ft LH Galvanized White

Wire size: .283
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

SSZP-24-114

Solid Shaft 1-1/4" Keyed Zinc Plated 24'

3BXT-YELLOW

Replacement Button/Switch Only - Yellow

Replacement button for 3BXT

748

Fasteners Self Drill & Tap Tek Screw 1/4-20 x 3/4" (#2PT) 1000/Box

Indented Hex Washer Head
7/16" Head
Max RPM = 2000
#2 point = shorter cutting edge (more thread)

TB-20

Molded Rubber Bumper Black 3 1/2" L x 6" W 3 1/2" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Molded Truck Bumper molded in one piece and will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
3 1/2" L x 6" W 3 1/2" Projection

HSC-600-JAWS

Replacement Jaws for Hand Swager

Can be used as replacement jaws for both the HSC-600 hand model and the HSC-600-B bench model

SMR7620TP5

Telco Thru Beam Receiver M18

Supply voltage: 10 - 30 V dc
Control Feature: Sensitivity pot. and light/dark switch
Sensing range: 20 m
Output Status: N.C./N.O.
Housing: 18 x 1 Plastic
5M cable

.......more details

28-2103

Steel Bumper Extension Bracket 4"D x 20" Tall 12"W

4" deep (projection) x 20" tall x 12" wide

LB412-18SF

Steel Faced Laminated Bumper Black 12" x 18" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login