Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Miller Edge Garage Door
MLC-K72

Miller Edge Light Curtain Monitored 6ft Pulsed

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing not recommended for carwash applications
  • Operating temperature: -40F to 140F
    • .......more details
Installation manualSell sheet
MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

  • For 2-wire edges
  • Was previously MWRTA02A now has a new board making installation easier
  • Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
  • This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
  • The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.
ME123-C

Miller Edge U-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
ME123-YELLOW-RH

Miller Edge Yellow Right Hand Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
RB-G-K10C

Miller Edge RBand Monitored Wireless Gate Edge System

  • RBand Gate Edge Transmitter/Receiver System
  • The system is intended to provide a wireless connection between a monitored sensing edge and a motorized operator that controls the associated gate
  • The RBand Receiver is compatible with up to 3 RBand Transmitters on 2 channels; 6 total transmitters.
  • RBand meets the 2016 UL 325 requirements for monitored devices and has been certified as a UL 325 Recognized Component.
  • It is designed for use with operators that comply with 2016 UL 325 using a Miller Edge 10K Sensing Edge.
ME123-2M-BLK-U

Miller Edge Black Universal 2 -Wire Monitored 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
WorksheetInstallation manualSell sheet
ME123-CA3

Miller Edge L-Shaped Aluminum Mounting Channel Sold by the Foot

RLC-K36

Miller Edge Light Curtain Non- Monitored 3ft NO/NC

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ideal for pre-2010 installations not requiring a monitored solution.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
    • .......more details
ME123-C3

Miller Edge L-Shaped PVC Mounting Channel Sold by the Foot

  • 2" Wide 1-1/4" High
MU22-2WIRE-RH-G

Miller Edge MU22 2-Wire Right Hand Gray - Sold per Foot

  • €˘Electromechanical edge for sectional doors and aircraft hangars. •The MU22 is a custom edge manufactured to exact specifications. •The MU22 is completely flexible and will contour to curved surfaces. It's profile can also be square rectangular or angled. •Touch sensitive signaling allows immediate reversal or stopping of motion. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •Vertical or horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
MWR22B

Miller Edge 2-Channel Wireless Edge Receiver RF 318 MHz

  • Power source: 12-24 volts AC/DC nominal Nominal 60 mA 140 mA activated
  • Output: N.O. N.C
  • Wire connections: Integral 18” wiring with #6 spade lugs
  • Antenna: Attached wire or F connector
  • LED Indicators: Power channel 1
  • Polycarbonate enclosure
    • .......more details
MWTA12B

Miller Edge Transmitter with Low Battery Alarm Small

  • The transmitter comes standard with a NEMA 4 weather-proof enclosure
  • Compact design that allow for easy troubleshooting.
  • The transmitter has an audible alarm that activates when the battery has 25% of its life remaining
  • Easy to configure · Non-monitored system ideal for operators manufactured prior to: · Doors: August 2010 · Gates: January 2016 · NEMA 4 transmitter built to endure rugged environments
  • Power Source: (2) 1.5 volts AA lithium batteries
  • Input: 2-wire N.O. sensing edge
    • .......more details
Installation manualSpec sheet
AW14-RF-K10

Miller Edge Wireless Air Wave Switch Transmitter/Receiver Kit

  • AW14-RF is the AW14 air wave switch with a transmitter embedded within the switch enclosure and the receiver wires into the operator.
  • There is no need to hardwire coil cords or retracting reels which saves installation time and improves visual aesthetics.
  • The AW-14-RF-K10 switch kit includes a MRF-01 receiver which is wired to the motor controls.
  • Battery is included # CR2032
Installation ManualSell Sheet
ME123-YELLOW-U

Miller Edge Yellow Universal Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
    • .......more details
Installation ManualWorksheetSell Sheet
MLC-K36

Miller Edge Light Curtain Monitored 3ft Pulsed

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
  • Operating temperature: -40F to 140F
    • .......more details
Installation manualSell sheet
MT21-2M-BLACK-LH

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Black Left Hand Outlet Sold per Foot

  • €˘Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
MT21-2M-BLACK-RH

Miller Edge 2-Wire Monitored Pressure Sensitive Edge Black Right Hand Outlet Sold per Foot

  • €˘Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
MT21-GRAY-RH

Miller Edge 2-Wire Pressure Sensitive Edge Gray Right Hand Outlet Sold per Foot

  • €˘Electromechanical medium profile edge for rolling fire door applications. •Touch sensitive signaling allows for immediate reversing or stopping of motion. •The MT21 is completely felixible and will contour to curved surfaces. The MT21 will also act as weatherstrip. •Temperature range: -30F to 155F •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manual
PS-20A

Miller Edge Pneumatic Air Switch in ABS Enclosure

  • Pneumatic switch offering a reliable low cost alternative to a standard electric sensing adge.
  • When attached to a hose inserted into the existing weather stripping the PS-20A acts as an effective sensing edge on doors up to 18ft in length.
  • Applications: rolling doors sectional doors and mass transit.
  • Electrical configuration: 3-wire SPDT
  • Temperature range: -20F to 158F
  • Max pressure: 20 PSI
    • .......more details
MAW123-BLK-LH

Miller Edge Air-Wave Edge Black Sold per Foot

  • This pressure sensitive air-wave edge can be adapted to suit a wide variety of applications.
  • When touch activated the MAW123 sends an immediate pulse of air through the extrusion to an air-wave switch which sends a signal to controls to stop and/or reverse operations.
  • It has been designed to fit most doors with double track bottom retainers.
  • With appropriate mounting channel this edge will fit nearly all doors from 11/2" to 2" thick.
  • The MAW123 is resistant to flame water and most common greases and oils.