Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Misc Garage Door Dock & Gate Garage Door
AC7

Felco C7 Cable Cutter 3/16" Capacity

  • Tool length: 8"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 7mm / 0.28in
    • .......more details
Data sheet
DM54LC

Cable Drum High Lift 54" 400-54HL Pair

  • 54" LC High Lift-LD Aluminum die cast alloy.
  • 3/8"-16x2" hardened cup point set screws installed with red heads.
  • Color coded: Red-LH and Black=RH. Maximum High Lift: 54"
  • Maximum Door Height: 120" + High Lift
  • Rated lift per drum: 275 lbs 550 lb per door max
  • Maximum cable diameter: 5/32" max
    • .......more details
BK100

Spring Anchor Bracket Mini USA Sold Individually

  • Adjustable residential center bracket
  • Bright zinc plated 12 gauge steel
  • Adjustable bearing plate
  • For 1-3/4" to 2-5/8" ID springs (Adjustable center line 2-3/8" to 4-1/4")
  • For use with steel or nylon bearings
  • Bearings NOT included
    • .......more details
BK110/PR

Light Duty End Bearing Plate 3-3/8" with Bearing - EBF 338 Residential Sold as a Pair - LH/RH

  • With C16-32F bearing
  • Galvanized steel
  • 3-3/8" shaft offset
  • Flange allows plate to be bolted to the wall for additional support
  • Same as part number 209
DM4X8

Cable Drum Standard Lift 8' 400-8 Pair

  • 8' Standard Lift aluminum die cast alloy.
  • Pair includes: (1) LH and (1) RH Color coded: Red=LH and Black=RH
  • Max. Door Height: 8'-1".
  • Rated Lift per Drum: 265 lbs
  • Max. Cable Diameter: 1/8"
  • Mounting: 1" tube or solid shaft with 1/4" keyway
    • .......more details
VBELT_4L290

VBelt 1/2" x 29" (4L290)

  • V-Belt not cogged
SF375

Spring Fitting 3-3/4" Pair (Long Ear)

  • Universal thread for use in either LH or RH wound springs.
  • Pair includes: (1) winding & (1) stationary.
  • Maximum wire size diameter: .4062".
  • Set screw installed: 3/8"-16 x 1-1/2" (2).
  • Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
  • Winding bar hole 5/8"
    • .......more details
EP2982

Exhaust Port 4" with latch short barrel ** To Extent of Inventory

  • 4" inside diameter 1/4" sleeve with latch.
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
EP2982-NL

Exhaust Port 4" non latching short barrel *** To Extent of Inventory

  • 4" inside diameter 1/4" sleeve
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
AC9

Felco C9 Cable Cutter 1/4" Capacity

  • Tool length: 13"
  • Gives a clean cut without crushing thanks to the triangular cutting system.
  • Blades and centre bolt in high-quality hardened steel for exceptional performance.
  • Thumb catch designed for one-handed operation.
  • Pressed steel handles with non-slip grips
  • Maximum cutting diameter: 9mm / 0.35in
    • .......more details
Data sheet
LB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-36

Laminated Bumper Standard Black 10" x 36" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-24SF

Steel Faced Laminated Bumper Black 10" x 24" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-24

Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-12

Laminated Bumper Standard Black 10" x 12" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-18SF

Steel Faced Laminated Bumper Black 10" x 18" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-18

Laminated Bumper Standard Black 10" x 18" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-14SF

Steel Faced Laminated Bumper Black 10" x 14" 6" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB610-14

Laminated Bumper Standard Black 10" x 14" 6" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
8-11-1

Strut Clip Sold individually

  • Hole diameter: 0.260"