Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Garage Door Garage Door
GALV-306-258-R

Cut-to-Length Torsion Spring .306 x 2-5/8" Right Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GALV-306-258-L

Cut-to-Length Torsion Spring .306 x 2-5/8" Left Hand Wound Galvanized Red Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.393-6-L

Cut-to-Length Torsion Spring .393 x 6" Left Hand Wound Orange

  • Priced per inch - cones & filler sold seperately
  • For factory installed cones use part no. C-600-INSTALLED
MW-00050

Micanan In-Line Torque Clutch Assembly (MP00232)

  • Friction clutch mounted in between motor and reducer flange
  • Comes with cover and studs
  • New part number MP00232
XT2563-CUT

Xcluder Rodent Block 3" Black Sold per Foot

  • For commercial and residential applications
  • Creates a tough barrier that is virtually impenetrable to rodents
Sell Sheet
.207-134-R

Cut-to-Length Torsion Spring .207 x 1-3/4" Right Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
1222_DUAL_TROLLEY_14'

LiftMaster Dual Trolley kit for 14' high door includes #41 Chain for 14ft High Door Angle tracks (2x) 14' (Actual length 227") and (1x) shaft

  • Provides a second drawbar-type operation on wide standard door
  • Includes 14ft tracks #41 chain hardware & Round Bar 1" x 20'
  • Works with TDC12 & TDC22 Maxum operators
TDC1222-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #41 chain pack (TDC41-16) ***Actual length 227"***

  • Double Angle Rails for doors up to 16'6" high
  • Includes #41 chain pack
TDC1222-18

Liftmaster Comm. 18FT Trolley Angle set (10-5818-P x 2) and #41 chain pack (TDC41-18) ***Actual length 251"***

  • Double Angle Rails for doors up to 18'6" high
  • Includes #41 chain pack
3BXT

Control Station Exterior Surface Mount O/C/S N4 Non-Metallic

  • Double pole contacts
  • H=5-3/4" W=2-3/4" D=2-1/2"
  • UL Listed CSA Approved
3BXT-YELLOW

Replacement Button/Switch Only - Yellow

  • Replacement button for 3BXT
02-103LGO-1

Push Button Station 3-btn Surface Mount O/C/S Nema 1 For LGO Ops only

  • PBS-3R
  • Open-Close-Stop
  • Works with Liftmaster LGO commercial operator
  • Also known as: 02-103LGO1 02103LGO1
  • Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D
  • Normally Open contact on Stop therefore it won’t work on any other LiftMaster operator besides the LGO. The 02-103 will work on all operators.
    • .......more details
WD-309884

Wayne Dalton 3-Btn Transmitter 303 MHz 3910

  • Visor Style (comes with visor clip)
  • Green Indicator Light
  • Size: 2-1/4"" x 3-1/2"
  • Works with Wayne-Dalton Models: Classic Drive: 3012 3016 3512; Quantum: 3211 3212 3213 3313 3412 3413
  • Same as models: 3910 02-3047-3BUH 297132
Programming Instructions
IS-2

Interlock Switch for Sectional Doors

  • Mounts on the door track to prevent the use of the operator when door is locked
  • Can be wired to a three button station
  • Demensions: 3" h x 3" w x 1-1/2" d
LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
DC1000-125

Dyna-Hoist DC Series Direct Drive Opener 1 HP 110/240V 1ph ** Price by Quote Only

  • The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
  • Continuous duty 1 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
  • Comes with integral absolute encoder to control the door travel
  • 24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
  • Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
  • Nema 4 photocell
    • .......more details
Pulse Series Installation ManualsDC Series Brochure
0220-1K-390

Heddolf 1-btn Overhead Compatible Remote 9 Dip Switch 390 MHz

  • Overhead compatible full-size transmitter
P220-1K

Heddolf 1-btn Transmitter 9-Dip Switch 318 MHz

  • 318MHz single button 9 trinary dipswitch remote control transmitter
  • Compatible with Allstar and Pulsar
  • Compatible with P294-K receiver
T-832-H

FL-Heddolf 2-btn Transmitter 311 MHz (T-832-S) ***Discontinued

  • Open/Close remote for 2 doors
  • Battery 12V included
  • Compatible with Keystone T-832-H and old Allstar T-832
  • 8 dip switch
  • Same as P220-2K
Programming instructions
PDC300-12-1-40-20

Pulse300 Direct Drive Opener 1/2 HP 110/240V 1ph 1" Shaft 40:1 20' Cable ** Price by Quote Only

  • the PULSE 300 Series is recommended for large high-cycle sectional doors rolling steel doors and light springless applications.
  • It’s an ideal solution for balanced doors up to 1580 lb./500 ft²
  • The 40:1 ratio is recommended for most balanced commercial applications.
  • 90V horsepower rated DC motor
  • If power fails the included 9Ah batteries takeover for continued door function
  • The built-in battery backup system eliminates the need for a chain-hoist but one can still be ordered as an option if desired.
    • .......more details