Devanco Canada - Get The Right Garage Door Opener‎ and Parts

MK-00059

Micanan Timer 7 Day/24hr Economical

TN29C

Wire Nuts (Marrette) Grey 22-14 AWG 100/Pkg

Screw-on connector
Wire Range: 22-14 AWG (Max = 1 x 14AWG wire with 1 x 20AWG wire & Min = 2x 22 AWG wire)
Rating: 105C (221F)
Voltage: 300V
Approval: CSA UL486C Listed

8165W

LiftMaster 1/2 HP AC Chain Drive Wi-Fi ***No Longer Available

Comes with 1 893LM remote and 1 882LMW multifunction control panel
1/2 HP AC motor with industrial-strength chain drive provides steady performance and lifting power.
Energy-efficient operation consumes up to 75% less power in standby mode.
Built in Wi-Fi for the easiest way to connect the garage.
Security+ 2.0™ safeguards your household – with every click a new code is sent to the garage door opener so that the door opens only for you.
PosiLock® locks down your garage door by electronically monitoring against a forced opening.

.......more details

Installation manual Sell sheet

MK-00031

Micanan Transformer 230V-24V-40VA

.421-6-R

Cut-to-Length Torsion Spring .421 x 6" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.437-334-L

Cut-to-Length Torsion Spring .437 x 3-3/4" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.406-514-R

Cut-to-Length Torsion Spring .406 x 5-1/4" Right Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.312-258-R

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.306-2-R

Cut-to-Length Torsion Spring .306 x 2" Right Hand Wound Red

Priced per inch
For factory installed cones priced seperately - use part no. C-200-INSTALLED

BOLLARD_4'

Bollard 6" Dia. x 1/4" x 48" High Capped (w) Base Yellow Powder Coat

6" Diameter 1/4" Steel Wall 48" High Base Plate is 10" x 10" x 1/4" Thick 5/8" Holes for Mounting Powder Coated Yellow

42GRR-AB

Allen Bradley Thru-Beam Photocell RX/TX Long Range 42GRR9001+GRL9040

BCSI-BM-31

Disconnect Lever Industrial Slide Gate Operator ** Please use BCSI-PM31

PRO-J-5083-U-RH

Micanan 1/2HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-5021-U-RH

Micanan 1/2HP 230V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-5011-U-LH

Micanan 1/2HP 115V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-LJ-5021-U

Micanan 1/2HP 230V 1P Jackshaft N1 Eyes Monitored ECB Universal Mount

On-Board receiver holds up to 20 transmitters

PRO-LJ-5021-U-RH

Micanan 1/2HP 230V 1P Jackshaft N1 Eyes Monitored ECB Right Hand

On-Board receiver holds up to 20 transmitters

PRO-GT-10043-U

Micanan 1HP 460V 3P Worm Gear Trolley Operator N1 Eyes Monitored ECB

PRO-GT-10021-U

Micanan 1HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

NUT-14-SS

Nut Stainless Steel 1/4"-20 Flanged Serrated Hex

PRO-GT-5021-U

Micanan 1/2HP 230V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

PRO-GT-5081-U

Micanan 1/2HP 208V 1P Worm Gear Trolley Operator N1 Eyes Monitored ECB

On-Board receiver holds up to 20 transmitters

ALUM-265

Aluminum 24" x 100' Spool Antique Brown / Brun Antique # 265

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 265
White #431 on reverse side

Colour chart

SPRAY-265

Aluminum Touch Up Spray Paint Antique Brown / Brun Antique #265/165 *** To Extent of Inventory

140g

ALUM-513

Aluminum 24" x 100' Spool Moonlit Moss / Poussiere de Lune # 513

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 513
Reverse side is #431 Bright White

Colour chart

.406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

PRO-TB-10043-U

Micanan 1 HP 460V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-TB-10053-U

Micanan 1 HP 575V 3P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#41 roller chain on 3/4 & 1 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-TB-5081-U

Micanan 1/2HP 208V 1P Trolley Operator with Brake N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-T-5023-U

Micanan 1/2HP 230V 3P Trolley Operator N1 Eyes Monitored ECB

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-LTB-5021-U

Micanan 1/2HP 230V 1P Commercial Trolley Operator With Brake N1 Eyes Monitored ECB

Designed for use on commercial doors with standard lift tracks that require no more than 15 cycles per hour
Trolley track for door up to 12ft standard upcharge for 14' & 16'
Door speed 9 inches per second
UL325
On-Board receiver holds up to 20 transmitters

60-7243

Standard Caution Sign English 12" x 24"

60-7248-689U

Wheel Chock Safety Pkg incl'd: pyramid chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) 68-9U Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Handles for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 9" long x 6" high

60-7248-CBI087

Wheel Chock Safety Pkg incl'd: yellow ductile iron chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) CBI-087 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Cast Ductile Iron for Impressive Strength
Painted Yellow for High Visibility
Size: 8-1/4" wide x7-1/4" long x 8-1/2" high

1004-2-16'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 16 ft***Actual Length 16'2"***

For door thickness 2"

IC-10

Wheel Chock IC-10 Ice Formed Steel Tooth Grip

"Tooth" Like Bottom Grips Icy/Slippery Ground Surface
Powder Coated Yellow for High Visibility
Formed Stee]l
Size: 8" wide x10-1/2" long x 9-1/4" high

PBC-3

Push Button Control Station 3-Btn O/C/S Stainless Steel Face Plate Nema 1 Flush Mount

Single gang box
Face plate: 4-1/4" H x 2-3/4" W Back Box: 4" H x 2" W

MK-00071

Micanan Transformer 575V-115V-50VA (MK00161)

LT100HLTB3815

Telco Thru Beam Transmitter with LED M12 Hi-Power 15M Cable

Sensor Light Transmitter with LED
M12 High Power 15M Cable

MX00164

Micanan VFD Transformer Panel Mod. 575V pri / 230V sec (MX00216)

The primary power is connected to the transformer panel and 230V from the transformer panel gets connected to OMC VFD operator

DJ501L5

LiftMaster Industrial- Duty Jackshaft Doorlock 1/2HP 115/230V 1Ph ***No Longer Available

Doors used with this operator should be balanced with the ability to be manually lifted by hand in an emergency or power outage.
These operators include a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
The operators are typically mounted to the wall when used with smaller sectional overhead doors with vertical or high lift and mounted to the side or the front of the hood when used with rolling doors and grilles.
DJ operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology
Security+ 2.0®

.......more details

212SE

Nortek Linear Weatherproof Keypad

120 users
Indoor/outdoor self contained brushed metal housing
Surface mount vandal resistant design
One piece housing suitable for wall post or gooseneck mounting
Durable metal Braille alpha-numeric keys
4 on board programmable timed relays

.......more details

MF00006

Micanan Hex Head Bolt 1/4" - 20UNC 1/2" Full Thread

Used on various Micanan operators
2 required per operator

HRB-8

High Riser Bracket for 7" Above Dock or Higher 8"

High Riser 8" Riser Bracket for 7" Above Dock Door or Higher
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

SRB-5

Standard Riser Bracket 5" Above Dock

Standard 5" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

SRB-4

Standard Riser Bracket 4" Above Dock

Standard 4" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

Specification Sheet

E/BLOP/150

Automatic Systems Safety Edge for BL229 14'-9" (EABLOP/150)

MK00594

Micanan Auxiliary Contact Block 100FA40

CAPACITOR031R

Manaras Capacitor 324-389uf incl. Bleeder Resistor

Used for 1/2hp 120/230V 1ph MOTOR254

MR-00021

Micanan Trolley Chain Drive # 41 792 Links for 3/4 1 HP 14ft High Door

ME123-C7

Miller Edge Flat 3-1/2" Wide PVC Mounting Channel Sold by the Foot

DB13-T

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Tapered Sides Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
4-1/2" depth
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles. and will not warp rust rot or harden.

.......more details

MM00447

Micanan Idler Wheel PRO-APTC

M2818

Molded Rubber Bumper Black 18" L x 8" W 2" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

LVB1220-11

Laminated Bumper Black 12" Projection Vertical Installation 20" L x 11" W Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

LB1212-36

Laminated Bumper Standard Black 12" L x 36" W 12" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB1012-24

Laminated Bumper Standard Black 12" x 24" 10" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB924-11

Laminated Bumper Black 9" Projection Vertical Installation 24" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB912-12

Laminated Bumper Standard Black 12" x 12" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LVB820-11

Laminated Bumper Black 8" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TVB424-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LVB424-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 24" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

TB412-14SF

Steel Faced Laminated Bumper Black 12" x 14" 5 1/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

Q080

LiftMaster Dolly Latch Kit K75-50138

For Liftmaster trolley operator HCT

LB412-14SF

Steel Faced Laminated Bumper Black 12" x 14" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB410-18SF

Steel Faced Laminated Bumper Black 10" x 18" 4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

TB610-36SF

Steel Faced Laminated Bumper Black 10" x 36" 6 3/4" Projection Horizontal Installation

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

8010-8FT

LiftMaster DC Chain / Cable Drive Garage Door Opener with 8ft SSR Rail (1608LM) ***No Longer Available

Customized DC Motor with soft start/stop action.
Chain/cable square steel rail (SSR) system for efficient operation and standard performance.
Security+2.0 increases remote control range and reduces interference for consistent operation.
PosiLock® electronically protects against forced openings.
The Protector System® invisible light beam auto-reverses the door if there is an obstruction.
Comes with: Door Control Button (883LM) 1-Button Remote Control (891LM)

.......more details

8065

LiftMaster Contractor Series 1/2 HP AC Chain Drive Garage Door Opener **DISCONTINUED

MyQ® Technology enables you to securely monitor and control your garage door opener and houselights with your smartphone tablet or computer.
1/2 HP AC motor with industrial-strength chain drive provides steady performance and lifting power.
Security+ 2.0™ safeguards your household – with every click a new code is sent to the garage door opener so that the door opens only for you.
The Protector System® has safety sensors that project a light beam across the garage door opening automatically reversing the door if anything interrupts the beam.
Comes with: 1-Button Remote Control (891LM) Door Control Button (883LM)

LVB630-11

Laminated Bumper Black 6" Projection Vertical Installation 30" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-24

Laminated Bumper Standard Black 10" x 24" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

LB610-12

Laminated Bumper Standard Black 10" x 12" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

.207-3-9-RHW

Mini Storage Spring .207 x 3" x 9" long Right Hand

BPPVCT

Garex PVC White Transition Moulding 289" #3764

Universal garage door panel adapter molding
Use on any 1-3/4" door
Allows a Garex panel to be used as replacement on any brand door
24' lengths only can be cut for transport

RESET014

Manaras Resettable Overload Fuse 17A 1 Phase

41A4371

LiftMaster Belt Cap Retainer

Same as 41C4371

MD-00246

Double Sprocket 41B14 / 41A32 with 1" Bushing

Double sprocket for PRO-H/HB

PRO-GHCB-20053

Micanan 2 HP 575V 3P Gearhead Operator with Brake No Controls

Installation manual Specification sheet

R2

Erone Radium 2-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

Wireless System Chart

R1

Erone Radium 1-Channel Key Chain Transmitter 433MHz

Designed for the control of automatic closing systems and anti-burglar systems thanks to its very high security coding system (KeeLoq® Hopping code).
The code sent by the transmitter changes at each activation avoiding any scanning and copying risk.
A special algorithm allows to keep synchronized transmitter and receiver.
Range up to 250 m (820 ft)
Ergonomic rugged & durable
Battery: Two 3V lithium battery (CR2016)

.......more details

Wireless System Chart

LA500XL20W

LiftMaster Single Arm Solar Package for LA500 Gate Operator UL325 (Include (2x) SP10W12V Solar Panels (1x) XLSOLARCONTUL Control Box (1x) K94-37236 Solar Harness (1x) LMRRUL Photoeye (1x) K10-36183 Battery Tray (2x) A12330SGLPK Batt. (1x) LA500DC)

Kit Includes: LA500DC arm XL Solar control box (XLSOLARCONTU) which includes two 10WATT 12V Solar panels compatible with LA400 LA412 and LA500 Universal Solar harness (K94-37236) Monitored Retro Reflective Photos Eyes (LMRRU) Battery Tray (K10-36183) and two batteies (A12330SGLPK)
For dual gates order extra LA500DCS secondary arm
Updated unit complies with new UL325 code revised Jan 2016
Commercial Duty Cast Aluminum Housing with Heavy-Duty DC Motor powerful enough to perform in the most demanding applications. Soft start/stop operation extends operator and hardware life for heavy-duty gate use.

Manuel d'installation Installation manual Sell Sheet Brochure

HAE00057

Linear LDCO Motor with Encoder

For LDCO800 operators manufactured before 04/2011 compatible replacement part number HAE00053 for motor with encoder and HAE00054 for encoder board.

RP-CAP-RSL-64-77

Lynx Capacitor RSL (1/2HP) 64-77 MFD ** repl. by 70-84 MFD

Also used in the 1/3HP openers. Replaces RP-CAP-RSL-53-64

210106

SkyLink Trolley for T-Rails

K20-1050C-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph TEFC Logic

PRO-X_MOD-1/575V

Micanan Explosion-Proof Modification N-7/N-9 for 1HP 575V

Modification includes an explosion-proof motor explosion proof fittings operator mounted explosion-proof electrical control enclosure and n explosion-proof three button station.

RADIO-EM932

Manaras 32-Door Dip Switch Transmitter O/C/S

3-button transmitter
Operates up to 32 doors by using a combination of 2 rotary dials and dip switch keys
Open/Close/Stop function
LED Indicator
Soft touch push buttons including a bright red stop button for easy identification
Includes 4 mounting screws and anchors

.......more details

Programming instructions Manual

108135.0002

Overhead Poly Type V- Belt for Old RG 32" *** by quote only

MV-00296

Micanan Wireless Push Button Station OCS for Logic 10.0

Used only on Logic 10.0 program 3.2.5

620-101416

Linear GTO Alarm 24VDC Non-Pulsed Apex

E/BLOP/246

Automatic Systems Option DBK Fan Heater 120V-400W for BL229

36645R

Genie Screw Drive Coupler

This coupler only works on the following models manufactured after June 2011.
TriloG 1200 (3064) TriloG 1500 (4064)
PowerMax 1200 (3062) PowerMax 1500 (4062)
GPower 900 (2564)
Powerlift 900 (2562)

MX00037-120V

Micanan Brake Assembly for PRO-J/H 120V Solenoid included

MG00001

Micanan Ribbed Hex Nut 1/2" -13UNC

Used on PRO-GHC
4 required per operator

H503L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 208/230-460V VAC 3 Ph Logic 5 Left Hand

Includes CPS-U
H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.

.......more details