Devanco Canada - Get The Right Garage Door Opener‎ and Parts

SELWR433

Erone Wiegand Receiver 433 MHz

26 bit
12-24V AC/DC input voltage

Wireless System Chart

MT5011U

LiftMaster 1/2 HP 120 Volt Medium Duty Trolley Operator

1/2 HP 120 volt 1 phase medium-duty logic trolley operator
Medium-duty logic board with integral 315 MHz radio receiver
CPSU commercial photoeyes included
4L V-Belt #48 drive chain adjustable friction clutch
Use on standard lift sectional doors up to 14' high and up to 12 cycles per hour
2 year warranty

.......more details

Installation manual Manuel d'installation Product guide Guide de produit

736

Fasteners Round Head Carriage Bolt 5/16-18 x 3/4" Gr 2 1000/Box

Full length thread
Max torque = 12

59LMC

LiftMaster Outside Keyswitch ** To Extent of Inventory

12 tumblers provide double locking action
Self cleaning barrel weather-resistant aluminum plate
Cannot be shorted out from exterior with key
One "NO" contact used to activate the door operator
Includes two keys

Installation Manual

MWRTA12B

Miller Edge Wireless Transmitter with Audible Alarm and 1 Channel Receiver

For 2-wire edges
Was previously MWRTA02A now has a new board making installation easier
Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm.
This feature that activates when the battery has only 25% of its life remaining indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.

BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

Zinc plated
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 3-1/2" maximum
Good for use with 3" hardware

Z9003-MAX

Pusher Spring - 27" with 3" diameter Tip Sold as a Pair

Pusher spring 27" long with a large 3" tip. Sold as a pair
11lbs of initial pushing strength per spring+ 3lbs per inch per spring

7FT-RAIL-SCREW

LiftMaster 7' screw drive rail 3077SD

One piece rail

02-406

LiftMaster Push Button Station Nema 4 O/C/S with Keyed Lock-Out Die-Cast Enclosure

Code on key is #301

MGR-2

Linear 2-Channel MegaCode Gate Receiver 318 MHz *** To Extent of Inventory

Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Memory: storage for up to 40 MegaCode transmitters
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 1000000+ (MegaCode format)
RF frequency: 318 MHz

.......more details

Installation Manual

MDRG

Linear 1-Channel MegaCode Gate Receiver 318 MHz *** Discontinued

Activates one gate or device
Supplied with F-connector and whip antenna
Mounting bracket supplied
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

AC7

Felco C7 Cable Cutter 3/16" Capacity

Tool length: 8"
Gives a clean cut without crushing thanks to the triangular cutting system.
Blades and centre bolt in high-quality hardened steel for exceptional performance.
Thumb catch designed for one-handed operation.
Pressed steel handles with non-slip grips
Maximum cutting diameter: 7mm / 0.28in

.......more details

Data sheet

50-104-2

LiftMaster Orange Coil Cord 3-Wire 18-ga 20 ft. Extended Curly Cord

CABLE_1/8SS-500

Cable 1/8" 7x19 500' Stainless Steel

.218-258-L

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Yellow/Orange

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

12FT-I-BEAM

LiftMaster 12' I-Beam Rail G3712RV / CD1012

10FT-I-BEAM

LiftMaster 10' chain drive rail 3710CH / CD1010

I-Beam chain rail for 3595 & ATS
Space required: 2" above heighest point of travel of the door

21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

120/208/240/480V PRIMARY 24V SECONDARY

CPS-UN4

LiftMaster Commercial Protector System Thru-Beam Eyes NEMA4

Waterproof photoeyes.
for direct connect to operators with Logic boards. L3 L4 L5
Receiving Eye - A: 50-50997 Sending Eye - A: 50-50998
These eyes will also work on the Micanan UL325 monitored operators

Installation Manual Manuel d'Installation Sell Sheet

10FT-RAIL-BELT

LiftMaster 10' belt drive rail 2770BD - colour code: Blue

Price reflects cost if purchased with an opener

881LMW

LiftMaster Motion-Detecting Control Panel with TTC Sec+ 2.0 Wi-Fi

Push button for garage door operation
Motion-detector automatically turns on the light when movement is detected
150 degree sensing angle for motion sensor
Program remote controls Wi-Fi Garage Door Openers and MyQ® enabled accessories directly from the control panel
Timer-to-Close feature automatically closes the garage door after a pre-programmed number of minutes - 1 5 or 10
Light run-time is 4 1/2 minutes with adjustable light timer option

.......more details

.375_5-1/4"-LH

Torsion Spring .375 x 5-1/4" x 12ft LH Yellow/Green

Wire size: .375
Inside diameter: 5-1/4"
Length: 12 ft

.283_3-3/4"-LH

Torsion Spring .283 x 3-3/4" x 12ft LH White

Wire size: .283
Inside diameter: 3-3/4"
Length: 12 ft

.262_2"-LH

Torsion Spring .262 x 2" x 12ft LH Red/Yellow

Wire size: .262
Inside diameter: 2"
Length: 12 ft

.225_1-3/4"-LH

Torsion Spring .225 x 1-3/4" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 1-3/4"
Length: 12 ft

374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

Compatible with wireless keypad model number 377LMC
Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
This transmitter is replaced by 894LT

41A5668

LiftMaster Gear & Sprocket Assembly for ATS211X

For models: ATS211X ATS2113X
For older model ATS211 use part number 41C4470

Installation Manual Manuel d'Installation

30B532

LiftMaster Capacitor 53uF-64uF 220V

For 1/2 HP models
Dimensions: 1-5/16" diameter x 4-3/16" long (including the terminals)

19-3025

Roller Chain #50 Nickel Plated 25ft Length

CAM005

Manaras Limit Cam 5/8-18 UNF

Limit cam for Mountshaft009
2 cam's required per shaft

41A4885-2

LiftMaster MVIS Pulley & Worm Gear Assembly

Gear and sprocket assembly for belt drive models between 1995-2002

Installation Manual Manuel d'Installation

41C4398A

LiftMaster RPM Sensor Kit

RPM sensor assembly 1986 - present

Installation Manual_bilingual

41A6102

LiftMaster Power Door Lock

For Jackshaft models

.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange

Wire size: .468
Inside diameter: 5-1/4"
Length: 12 ft

.273_3-3/4"-RH

Torsion Spring .273 x 3-3/4" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 3-3/4"
Length: 12 ft

23-10041-1

LiftMaster Double Limit Switch Commercial DP DT

Double limit switch DP DT
For LiftMaster and Micanan operators

PL-SW-PHOTO

Lynx Silent Guard Photocell for Proline Openers

For models built from 2000+
Comes with photoeyes wire and bracket

CP-SW-MIC

Lynx Limit Switch for Commercial Operator with Logic Board

Single limit with curved actuator lever
Switch attaches directly to the Logic 6000 board

LYNX-RCVR-OCS

Lynx O/C/S Receiver

For use with Lynx o/c/s transmitter # T3B-OCS

Compatibility chart

877LM

LiftMaster Sec+ 2.0 Keyless Entry

Features Security+2.0™ rolling code technology
One-button-to-close feature
Temporary password option
Program code directly from keypad
Backlit keypad
Includes 9V battery

.......more details

877LM Manual

SESMT03

Erone Wall Support for Transmitter

Wall support for one S2TR2641 transmitter
Color: Grey
Velcro and mounting hardware included

Wireless System Chart

OSH-6113-ECB

Manaras Opera-SH 3/4HP 120V 1Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

8FT-TROLLEY-SET

LiftMaster 8ft Double Angle Rail Set for Comm. Trolley Ops 19-5808-P (2pcs) *Actual length 131"*

Double Angle Rails for doors up to 8' 6" high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us

TRANSF142

Manaras Transformer 575-24V 40VA

Transformer 575V Primary 24V Secondary 40VA

MH5011U-LH

LiftMaster 1/2 HP 120 Volt Medium Duty Jackshaft Operator

1/2 HP 120 volt 1 phase medium-duty hoist operator Logic board with integral 315 MHz radio receiver for Open/Close or Open/Stop/Close
CPSU commercial photoeyes included ( Nema 4 optional)
4L V-Belt #48 drive chain adjustable friction clutch
Emergency disconnect and chain hoist standard
Solenoid actuated disc brake
Door speed approximately 8" to 12" per second

.......more details

Installation Manual Manuel d'installation MH Sell Sheet MH Shop Drawing

MH5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Jackshaft Operator

1/2 HP 115 volt 1 phase medium-duty hoist operator
Logic board with integral 315 MHz radio receiver for Open/Close or Open/Stop/Close
CPSU commercial photoeyes included ( Nema 4 optional)
4L V-Belt #48 drive chain adjustable friction clutch
Emergency disconnect and chain hoist standard
Solenoid actuated disc brake

.......more details

Installation Manual Manuel d'installation MH Sell Sheet MH Shop Drawing

BRAKE011

Manaras Band Brake Assembly Kit

Does not include solenoid
Replacement brake kit for operators that are belt driven and have a brake. Works with OSH OTBH
Will not work with Gear-Head operators

Installation Manual

831-R

Allstar 1-Door O/C/S Receiver 107480 318 MHz ** To Extent of Inventory

Three channels - three relay outputs
Textured aluminum case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

110554

Allstar MVP 1-Door O/C/S Receiver 318 MHz ***Replaced by P-831RE

Three channels - three relay outputs
8-wire operator connection
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC
Codes: 19683

.......more details

Programming Instructions

DT

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

Activates one Delta-3 receiver
Test/operate LED
Visor mounting clip supplied
Power: 9-volt battery
Codes: 256 (set by 8 dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

HAE00002

Linear Safety Beam Set *** No Longer Available

Set includes: Sender and Receiver photocells wire and connectors
Safety beams will work with all Linear operators that currently have safety beams installed.

1007-1-5/8-24'

Aluminum Bottom Retainer Flat Fits Doors 1-5/8 to 1-3/4" Thick**Actual Length 24'4"

For door thickness of 1-5/8" to 1-3/4"
die # A-25388

1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1104-16FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-8FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-18FT-SAND

Residential Side & Top PVC Weather-Strip with cap 18' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1104-10FT-SAND

Residential Side & Top PVC Weather-Strip with cap 10' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

1104-7FT-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

7001-14-WHITE

Commercial Side & Top Weather-Strip 14' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

25-42-80

Extension Spring 7' Door - 80 lbs Gold

Double - Loop
25" long 42" stretch 80 lb load
Sold individually
Rated for 10000 cycles

Spec Sheet

973LMC*

LiftMaster 3-btn Security+ Transmitter 390MHz - DISCONTINUED

390 MHz Secruty+ three button visor tranmsitter
Compatible with Security+ systems including Chamberlain Sears Craftsman and Raynor Openers (Safety Signal) manufactured 1997-2005
Visor clip and battery included (part # CR2032)
Same as 973LM 96LM 953CB 956CB
Discontinued 12/31/13 - Replacement options 375LMC 890MAX 893MAX 892LT 894LT

95-00114

Truck Door Rivet 1" Stainless Steel

Stainless steel construction
Round head design
Cross Reference: T #89217-0032

94-00002

Truck Door Clevis Pin 1/4" x 7/8"

Zinc Plated finish
1/4" x 7/8"

28-02101

Truck Door 2" Vertical Track and Right Angle Assembly 106.5" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-2
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

26-40202

Truck Door Head Seal Retainer Only 96" Long for Roll-Up Doors

Retainer extrusion is constructed of high quality aluminum.
Panel mounted retainer
Cross Reference: T #69790 500000

R5115

Bearing 1" Commercial with Flanged Retainer Football Style

1" Commercial bearing pressed in a Flanged Retainer Football Style
Type: Steel Bore: 1"
Inner Race Offest: 13/64"
Rated Load Cycles: 250 lb @ 10000 cycles (8')

DM54LC

Cable Drum High Lift 54" 400-54HL Pair

54" LC High Lift-LD Aluminum die cast alloy.
3/8"-16x2" hardened cup point set screws installed with red heads.
Color coded: Red-LH and Black=RH. Maximum High Lift: 54"
Maximum Door Height: 120" + High Lift
Rated lift per drum: 275 lbs 550 lb per door max
Maximum cable diameter: 5/32" max

.......more details

SF375

Spring Fitting 3-3/4" Pair (Long Ear)

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
Winding bar hole 5/8"

.......more details

RN1324

Roller 2" Nylon 4" stem 13 ball White Sold per Roller

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.71"
Box qty: 100 Box weight: 32.2 lbs (2-4-13 White Nylon)

RS1027

Roller 2" Steel 7" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 6.25" Overall Length: 7.25"
Box qty: 180 Box weight: 73.5 lbs (2-7-10 steel)

R5114

Shaft Bearing 1-1/4" Machined 900LBS

Standard press-in bearing no retainer
Rated for 900 lbs

903024ORBG

Operator Reinforced Bracket 24" Galvanized

Comes with clevis & clip pins. 12 per carton.

HD3130

End Stile Latch 7-1/2" Lockbar Length

Lockbar Length: 7-1/2"
Throw: 2-1/8" Use with: Lockbar or End Stile
Centerline Distance (key spindle to handle shaft): 2-3/4".
Handle in Bright Chrome Finish Latch in Bright Zinc Plated steel.

25-10402

Truck Door Pull Strap (15.5") with Zinc Retainer for Roll-Up Doors

Durable 2" wide black nylon construction for added strength and durability.
Custom lengths available
Cross Reference: 257000

25-10102

Truck Door 2" Steel Roller 3" Shaft for Whiting Roll-Up Doors

Zinc plated shaft 10 roller ball design
Shaft Length: 3" Overall Length: 3.75"
Cross Reference: W #2996 T #70224

25-10100

Truck Door 1" Steel Roller 2.5" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design
Cross Reference: T #61174 T #69162 W #4026 W #4027 291000
Box quantity: 25

25-10001

Truck Door End Hinge for Todco Roll-Up Doors

Zinc plated steel construction
Four-knuckled to ensure smooth door operation
Cross Reference: T #69035 W #4007 220000

25-01439

Truck Door 1/8" Stainless 5/16" Eye 115" for Roll-Up Doors Sold per Pair

Works with both Whiting and Todco doors
Aluminum eye ends are used on 5/16" eye cables
Cable size: 1/8"

HAE00040

Linear Control Logic/Receiver Board

Replaces HAE00039
Control board for LSO LDO LCO models

K32-37560-3

LiftMaster Gear Reducer 28:1

This is a replacement Gear Reducer (28:1). Compatible with LiftMaster® HCTDCU Overhead Gate Operators.

K20-1075B2LPH24

LiftMaster Electric Motor 3/4 HP 115V/208V/230V 1Ph Logic 5

Standard base mount 3/4 hp motor for new L5 operators
Also known as: 20-1075B-2LP K20-1075B-2P-H24 K20-1075B-2LP

10-30702

LiftMaster Chain Guard Top Cover Mfg Painted (K10-30702-2)

.468_5-1/4"-LH

Torsion Spring .468 x 5-1/4" x 12ft LH Blue/Orange

Wire size: .468
Inside diameter: 5-1/4"
Length: 12 ft

GD-STEND-18D

End Cap Steel 18G 18" Double 1-3/4"

37030A

Genie Motor Assembly DC

Works with Genie ReliaG 800 2022 2024 and 2042
Replacement powerhead motor assembly

2110-274

Linear Clutch Shaft Assembly HSLG UPS

A01

Lynx Proline Drive Shaft Assembly with Helical Gear

Assembly includes the output shaft and nylon gear

TRACK-2"-RAW-13

Raw Vertical Track 2" 13'-0" Sold per Piece

AELD

LiftMaster Elite Plug-In Loop Detector

For use with Omni Control board available on the Chamberlain commercial line.

Installation Manual

HSLG-411

Linear Commercial Slide Gate Operator 3/4 HP 115V 1 Ph - Heater not Included

Great for industrial and commercial applications
Features the APeX control board
Emergency manual disconnect handle
Powder coat finish
Post mount standard; pad mount optional
Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety

.......more details

LMUNTG

LiftMaster Glass Mount Parking Pass Tag Sold Per Card

A security-enhanced RFID passive transmitter for use with the LIftMaster LMSC1000 Long Range Vehicle Access-Card Reader.
Glass-mount means it can be affixed to either the windshield of a car or to the headlight housing of the vehicle
Aligns with the cone-shaped detection zone from LiftMaster RFID Reader and activates it to open gate barrier
Added security of single mount use: shuts off if removed after adhering to a surface
Use on trucks or other high-clearance larger vehicles; 20-25 ft detection range from reader
Tags are sold in batches of 50. Your location may have a facility code. Check with your maintenance department or administrator if needed

.......more details

Installation manual Manuel d'installation Sell sheet Brochure

K74-16420

LiftMaster Limit Switch Kit for LGO **DISCONTINUED

Installation Manual

1110197

LiftMaster Take Up Bolt 3/8"-16

Measures 3-15/16" Long
Also known as: G115015 1110197 115015 11-10197

MWT12

Miller Edge Transmitter RF in Nema 4 Enclosure *** To Extent of Inventory

The MWT12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided
Response time: nominal 30msec.

.......more details

JHDC12X1BMC

LiftMaster MAXUM Jackshaft 3/4HP 120/240V 1PH DC Operator 60 Cycles/Hour 1200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

JHDC_Installation-manual JHDC_Manuel-installation Data sheet Fiche technique Quick connect guide Guide de connexion rapide Ordering guide Sprocket recommendation

7119405

FAAC 400 Plug for End Cap