Devanco Canada - Get The Right Garage Door Opener‎ and Parts

HSLG-121

Linear Commercial Slide Gate Operator 1 HP 230V 1 Ph - Heater not Included

Max duty cycle: Continuous
Integral APeX Controller
Double V-belt to chain reduction
#40 roller chain
Emergency manual disconnect handle
Powder coat finish
Post mount standard; pad mount optional
Integral entrapment sensing system with dual multi-turn precision potentiometers for accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
Integrated warning beeper during gate movement
15 diagnostic LEDs on board for ease of setup and troubleshooting
Selectable pre-start alarm with provision for ADA compliant visual pre-start and run alarm
On-board APeX Controller three-button control station
AC and DC power available for access control accessories
All accessory connections 24 VDC
Solenoid disc brake
Built-in master/slave capability using 3-wire shielded cable
Heavy-duty steel chassis
Adjustable torque limiter

K75-50932

LiftMaster Crank Housing Kit - Hand Crank Not Incl. **DISCONTINUED

SL3000 new style hand crank pocket to store hand crank (crank sold separately)

CP-PW-NM-CDJH

Lynx Pocket Wheel for CDJH Hex Bore OD 6.35"

Same as #2-30-1

OSH-6212-ECB-LH

Manaras Opera-SH 1/2 HP 240V 1Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"

Installation Manual

MH00075

Micanan Shaft Collar 5/8"

.235-3.25-11.5-LHW

Mini Storage Spring .235 x 3.25" x 11.5" long Left Hand

.234-2-R-C

Cut-to-Length Torsion Spring .234 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.234-2-L-C

Cut-to-Length Torsion Spring .234 x 2" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.218-2-R-C

Cut-to-Length Torsion Spring .218 x 2" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

PRO-GH-7581U-L

Micanan 3/4HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Left Hand

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-HB-5038U-LH

Micanan 1/2HP 380V 3P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5021U-RH

Micanan 1/2HP 230V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

PRO-HB-5081U-LH

Micanan 1/2HP 208V 1P Hoist Op. with Brake N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake included
On-Board receiver holds up to 20 transmitters

02-410

LiftMaster Commercial Key Control Station Open-Close and Off with Stop Button

Outdoor Surface Mount Nema 4/12 station
Standard key cylinder
Open/Close spring return to center (off)
Key removable in center position only
With Stop button

PRO-H-5053-E-RH

Micanan 1/2HP 575V 3P Hoist Operator NM ECB No Eyes Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

MK-00015

Micanan Fuse 2 Amp 250V Glass Sold per Fuse

MK-00523

Micanan Reversing Contactor ABB Size 1 24V w/Interlock

LC2K1210B7 mini contactor

MK-00032

Micanan Transformer 460V-24V-40VA

MM-00319

Micanan PRO-GJ L-Bracket Right Angle Front of Coil For Rolling Steel Doors

TN33C

Wire Nuts (Marrette) Yellow 22-10 AWG 100/Pkg

Screw-on wire connector
Wire Range: 22-10 AWG
Rating: 105C (221F)
Voltage: 600V
Approval: CSA UL 486C Listed

K001D8397-1

LiftMaster Power Board 3ph 575V L5

This is a 3PH/L5 Power Board 575V Replacement Kit. Compatible with various LiftMaster® 3 Phase Logic 5.0 Commercial Door Operators; equipped with current sense

MV-00019

Micanan Pull Cord SPST Lever Type - Nema 4

MV-00272

Micanan Key Switch O/C Single Gang Nema 1 Flush Mount

MV-00305

Micanan Wireless Pull Cord

MV-00304

Micanan Wireless Key Switch

PRO-J-10083-U-RH

Micanan 1HP 208V 3P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

.406-334-L

Cut-to-Length Torsion Spring .406 x 3-3/4" Left Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.283-514-R

Cut-to-Length Torsion Spring .283 x 5-1/4" Right Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-514-INSTALLED

.375-334-L

Cut-to-Length Torsion Spring .375 x3-3/4" Left Hand Wound Yellow/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

PRO-J-7521-U-RH

Micanan 3/4HP 230V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-7581-U-RH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Right Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Pro J Manual Specification Sheet

PRO-J-7581-U-LH

Micanan 3/4HP 208V 1P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

PRO-J-5043-U-LH

Micanan 1/2HP 460V 3P Jackshaft Monitored ECB N1 Eyes Left Hand

On board receiver with antenna
Continuous duty industrial motor with overload protection
Heavy duty 5L V-belt
Adjustable friction clutch
Solenoid brake (optional PRO-JB) recommended for large doors
3/4" permanently lubricated & sealed precision ball bearings on pulley shaft

.......more details

Specification Sheet

MA026

LiftMaster Pad Only Yellow For 12' Arm

Pad only - arm not included

.406-6-R

Cut-to-Length Torsion Spring .406 x 6" Right Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

PRO-APTB-5011-U

Micanan 1/2HP 115V 1P Apartment Trolley Operator With Brake N1 Eyes Monitored ECB

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

PRO-APT-5043-U

Micanan 1/2HP 460V 3P Apartment Trolley Operator N1 Eyes Monitored ECB (PRO APTE)

Low clearance design for APT applications (9.5")
Door speed: 12" per second
Monitored board
On-Board receiver holds up to 20 transmitters

60-7248-SC6

Wheel Chock Safety Pkg incl'd: alum. chock wall bracket 15' chain 3/8" x 1 7/8" anchors (4) & 3/16" quick links (2)

System Includes (1) SC-6 Chock Bracket Tie Back Chain English and French Caution Signs and (4) Wall Bracket Anchors
Excellent Surface Grip on Tire and Ground
Lightweight Aluminum
Size: 6" wide x 6-1/2" long x 6" high

PBC-3

Push Button Control Station 3-Btn O/C/S Stainless Steel Face Plate Nema 1 Flush Mount

Single gang box
Face plate: 4-1/4" H x 2-3/4" W Back Box: 4" H x 2" W

RBH503L5-RH

LiftMaster 1/2 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

MK-00055

Micanan Transformer 575V-24V-50VA

Fingersafe

E/1929/031

Automatic Systems Installation Plate Ass'y BL229

Used on the BL229 gate op.

MD-00201

Sprocket 50B40 x 1-1/2" 3/8" KW 2SS 5/16"

DBE-10

Molded Rubber Bumper Black 10" L x 4 1/2" W 3" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts
10" L x 4 1/2" W 3" Projection

.......more details

M2818

Molded Rubber Bumper Black 18" L x 8" W 2" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

LB912-36

Laminated Bumper Standard Black 12" x 36" 9" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

MG00011

Micanan Ribbed Hex Nut 1/4" - 20 UNC

PRO-GHC operator parts
12 required per operator

K20-1050C-2TLP

LiftMaster Electric Motor 1/2 HP 115/230V 1Ph TEFC Logic

PRO-PL-10053-E

Micanan Wall Mount Control Panel 1HP 575V Non-Monitored ECB

Standard features include: N-4/12 12" x 10" x 6" panel B-2 C-2 D1 E2 T TS Mid-stop control functions Time delay on reverse On-board radio receiver hinged cover backplate primary fuses in panel
If PBS on cover required an additional charge will apply
If panel not ordered with an operator an additional charge will apply

MD00002

Micanan Bevel Gear 20 Tooth 5/8" ID

Comes with keyway and 2 set screws
Used on PRO-GHCW

COLLAR004

Manaras Collar 5/8"

40-3505

LiftMaster Gate Warning Sign Plastic English

37561S.S

Genie Belt and Bullet Assembly 8ft

For use on 8 ft doors
Compatible with the following:
SilentMax 1200 (Model 4042) 1000 (Model 3042) 750 (Model 3055) 550 (Model 2055)
ReliaG 650 (Model 1028) 850 (Model 2028)
IntelliG 1000 (Model 3024)

E/BLOP/122

Automatic Systems Red Arm Light - 2 Sets

Increases visibility of the arm on BL229 gate operator

22000

Doorlec Enclosure EEMAC 12 and 4 1 Hole 22MM

Works with selector switch #22016 (sold separately)

PRO-GHB50053-PNL

Micanan 5 HP 575V 3 Ph Gearhead with Brake No Controls

Special Order only
No controls in operator- separate panel is required

DS350

Heavy-Duty Commercial Non-Insulated Rollup Sheet Door with Interior Slide Locks

Heavy-duty Model DS-350 has statewide Florida product approval for wind load protection up to 190 mph.
This door is ideal for commercial applications with openings up to 16’ wide by 16’ high.
Heavy-duty 13-gauge guides attach to 8-gauge wall angles to give maximum wind load protection.
Installation to masonry or steel is quick and simple with no special preparation or overhead tracks needed.
A wide selection of colors to choose from
Made to Order

.......more details

5001-7-WHITE

Residential Side & Top Weather-Strip 7' Long - White

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

3-44-2

Roller Carrier Only 2-Hole Sold per Piece

Sold per piece no box quantity

MP-00012

Micanan Reverse Limit Switches Mod.

For relay logic models

16-8002

LiftMaster Cogged Vbelt 4L330

Fits BG790 barrier gate opener

2806.148.140

Whiting .148 x 2-3/16 x 14" Roadside with Cones

2807.148.140

Whiting .148 x 2-3/16 x 14" Curbside with Cones

30257T

Genie Coupler Screw Drive Units

Used for attaching the screw of Genie screw drive rail to the motor head.
This coupler is made to break away if the door hits a hard obstruction thereby protecting the motor.
If the motor of the screw drive Genie runs but the screw is not turning this coupler needs replaced.
To check and replace that part remove the two screws holding the rail to the main power head
Mounts on rear of opener rail and fits in motor head.

RS3346

Roller 3" Steel 3/4" Shaft 5.8" stem Heavy-Duty 6203 Bearing

Steel Roller Wheel diameter: 3" 5.8" Stem Overall length: 7"
Heavy-duty 3/4" shaft supporting higher weight load applications

LIMIT-KIT-BCSI

Limit Shaft Kit for BCSI Gate Operator ** Price by Quote Only

V1102-BLACK

Replacement Vinyl Only for 1102-Black 200ft Roll

Sold in 200 ft rolls only

APOW1

LiftMaster Transformer For Roboswing & Roboslide Gate Operators *** To extent of Inventory

Elite Robo plug in transformer was 18VAC now replaced by 25V California energy compliant
As of March 2008 transformer has been changed to a 25 VAC self resetting unit that is to be used as direct replacement for the old 18vac units

41ASWG-0014SA

LiftMaster Rear Connector

Used on LA400 LA412 LA412-S

BK023/PR

Commercial 3" LHR Bottom Brackets Sold as a Pair (L & R)

Same as BB-6-3 reinforced c/w cotter and clevis pins
Use with: 3" straight track
Sold as a pair (includes one left and one right).

MH00109

Micanan Flanged Snap Ring 3/4" ID Precision Bearing

25-10105

Truck Door 1" Steel Roller 3.25" Shaft Length for Todco Roll-Up Doors

Zinc plated Hardened shaft and raceways
Seven roller ball design

CH100

Contact Cleaner and Lubricant 325g

Cleans both electrical and electronic parts.
Cleans dries and leaves a thin protective film.
340g / 11.5 oz spray can
12 cans per case

Safety data sheet Fiche de données de sécurité

TRACK-2"-RAW-10

Raw Vertical Track 2" 10'-0" Sold per Piece

120" long 10'-0"

MD00020

Micanan Sprocket 50B40 X 1-1/4"

K1D8389-1CC

LiftMaster Main Board DC Pad Mount for UL325

This replacement board is compatible with the following models: CSW24U CSL24U RSW12U and RSL12U
Also compatible with HCTDCU and HCTDCUL Overhead Gate Operator
Same as 001D9039-1CC

28-00114

Truck Door 1" Std Vert. Track and Angle Assbly J Style Roadside (LH) 120" Todco Style

For Todco style doors
Galvanized steel 14-gauge construction
Includes J-style channel mounting angle with track and operator bracket
Fits door sizes 101 - 114" high
Cross ref: T #49014-2 T #41034-2 & W #4045

19-41240D

LiftMaster Drive Chain #41 10' Box Black Oxide

#41 chain 240 links

LEVER051

Manaras Brake Lever MGH C-1 Galvanized

SL595105UL

LiftMaster Industrial Slide Gate OP. 1 HP 575V 3PH with Heater and LMRRUL

3 Phase: 575V is a discrete model without field-selectable voltage.
Includes factory installed heater kit.
P3 MOTOR® High starting torque continuous-duty motor.
OPERATOR DUTY RATING: 25 cycles per hour.
METAL FRAME: 7-gauge pre-galvanized steel.
WORM GEAR REDUCTION: 20:1 worm gear reducer.

.......more details

ALUM-559

Aluminum 24" x 100' Spool Pebble / Kaki # 559

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 559
Reverse side is #431 Bright White

Colour chart

8355W

LiftMaster Premium 1/2HP AC Belt Drive Wi-Fi

Free MyQ® Mobile App so users know their home is secure.
Built-In Wi-Fi® for the easiest way to connect the garage.
Real-Time Alerts indicate the status of the garage door via email or push notifications.
Monitors and Controls the opener from anywhere using mobile devices.
Belt Drive system for quiet maintenance-free performance.
Motor Vibration Isolation System (MVIS®) provides quiet reliable operation.

.......more details

Installation manual Sell sheet Brochure Receiver Logic Board Conversion List

ALUM-431

Aluminum 24" x 100' Spool Bright White / Blanc Pur # 431

20% thicker than the aluminum sold in retail stores (0.022" )
Aluminum on the reverse side
Gentek # 431

Colour chart

MG020-B-2E-06

Miller Edge Sensing Edge Black 2-Wire End Outlet 6ft Long

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

.343-334-L

Cut-to-Length Torsion Spring .343 x 3-3/4" Left Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.343-334-R

Cut-to-Length Torsion Spring .343 x 3-3/4" Right Hand Wound Blue/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

BCH753L5-LH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Left Hand ***Replaced by CRBH753L5-LH

Industrial Duty Hoist Operator with Damp Environment modification
Comes with CPS-UN4 photoeyes
External brake included

Installation manual Manuel d'installation Sell sheet Brochure

IRB-MON-RX

EMX Monitored Receiver Board Only

Receiver board only for IRB-MON

ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

Features a slim design that is compatible with most gate operators that require a dry contact relay input.
No harness required; comes with terminal screw adaptor
ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
Frequency count/reset switch
10 sensitivity settings
Loop diagnostics

.......more details

K75-34828

LiftMaster Idler Shaft Kit

Complete with: Bearings Sprocket 50B12x1" and Idler Shaft.
For SL575 SL585 with GL Board

K75-34791

LiftMaster Clutch Kit for SL585

Kit includes: Clutch disk Clutch plate Torque Limiter Hub Sprocket Washer E-Rings Nut Bearings and Compression spring

BELT-GEAR

Skylink Belt Gear for EQ Operators 210131 ***NLA

New model # 210131 no cover is needed
Metal Gear

MK-00697

Micanan Fraba FOS-1 Exterior Thru-Beam Photocell Nema 4 / 4X 45ft Range

Exterior Through-Beam Photocell
Sensing Distance 45 Feet
UL325/2010 Recognized Component
Comes with Sender Receiver and Brackets
NEMA 4 & 4X

Installation manual

L-4-18-0-M

Cable Tie Standard 18 LB Black 4" Nylon 1000/pkg

Length: 4.12" / Width: .095" / Thickness: .042" / Diameter: .875"
Low insertion and pull through force
Advanced pawl and teeth design
Angled tail provides quicker initial insertion alignment
Tail finger grips allow easier handling and tightening
Rounded edges provide added safety and eliminate insulation damage

.......more details

OTBH-6213-AE05

Manaras Trolley Operator 3/4 HP 240V 1Ph with Elect. Circuit Board Apt. Model

A premium low headroom apartment type operator designed for use on industrial standard lift sectional doors with high daily use requirements
30 cycles per hour 100 cycles per day
It incorporates a drum-shoe type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain