Devanco Canada - Get The Right Garage Door Opener‎ and Parts

200BL-10

2" Light Brush Insert 10ft Long

Polypropylene bristles
Same as MS1703-120

BCH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand ***Replaced by CRBH753L5-RH

Industrial Duty Hoist Operator with Damp Environment modification
External brake included
Comes with CPS-UN4 photoeyes

Installation manual Manuel d'installation Sell sheet Brochure

PEDALU72

Aluminum Pedestal Post 72"

Pedestal post with hood
High quality aluminum
72 inches
Dual face-plate allows for easy wire connections

Shop drawing

BL-14

Barlock Kit Complete for 14ft Wide Door Kit includes hardware bag

Kit includes hardware bag and bars (85-1/2")

Assembly Manual

26-943255-CUT

Truck Door Bottom Panel with Seal (15.5" x cut-to-size) for Whiting Dryfreight

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
These panels have no routs and shipped without holes.
3/4" thick 7 ply exterior grade medium density plywood. Primer Finish
Comes only with bottom retainer and seal (installed)

FHKS3D-86

Stainless Steel Face Hardware Kit 3" Track Double End Stile 6 Panel 8 Sections

Kit includes: Top & bottom fixtures center hinges end hinges and self drilling hinge screws
All hardware is heavy-duty 12 ga material
Kits are configured for up to 2" door thickness. Other door thickness are available by request.

5001-10-BLACK

Residential Side & Top Weather-Strip 10' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

5001-9-BLACK

Residential Side & Top Weather-Strip 9' Long - Black

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

41D8181

LiftMaster Cover

5001-WG-7-MOAK

Residential Side & Top Weather-Strip 7' Long Wood Grain Medium Oak with Screws

PVC wrapped
Painted aluminum retainer
Dual fin vinyl
Painted screws to match. 1 screw per foot
Sold by full case quantity (20)

201-300-401-00

Equinoxe Long Range Transmitter O/C/S for 8-Doors 433 MHz Pre-2016

Open/Close/Stop remote for 8 doors
Range of approx. 1000ft
A heavy-duty remote for Industrial applications
Old generation- prior to 2016

Programming Instructions Instructions de programmation

LVB620-11

Laminated Bumper Black 6" Projection Vertical Installation 20" x 11" Sold Individually

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

3-32-1

Low Headroom Top Bracket 2" Residential 1 pc

For residential door with 2" track

NUT022

Manaras Lock Nut Zinc Plated 3/8-16 Hex Nylon

Used on old MJH

3950

LiftMaster Jackshaft Door Operator for Comm. Rolling Sheet Doors

Designed for commercial rolling sheet door applications only - ideal for self-storage facilities.
It may be used on commercial rolling sheet doors with live or dead shaft measuring up to 12 ft. high and up to 14 ft. wide but not exceeding 650 lbs.
Maximum recommended duty cycle: 10 cycles per hour.
UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
Heavy-duty 24V DC motor provides ultra-quiet operation
Push button limit setting

.......more details

Installation manual Sell sheet

NIR-HD

EMX Industries NIR Hood Cover Steel

The hood keeps rain and other debris from distorting or blocking the photo beam.
It also helps to keep the sun from glaring off the reflector and disturbing the beam's reflection.
Replaces the mounting bracket that comes with the sensor.
Comes with Hood two sets of nuts and bolts and a plug

MM-00057

Micanan Wall Mounting Bracket (GH reducer 50/70)

MHS5011U-RH

LiftMaster 1/2 HP 120 Volt Medium Duty Slow-Speed Jackshaft Operator

Designed for use on rolling sheet doors.
It features an adjustable friction clutch high-starting torque motor with overload protection emergency chain hoist with electric interlock and emergency disconnect chain.
Easy emergency manual operation using a floor level disconnect and an electrically interlocked chain hoist mechanism
Floor level disconnect
24V NEC Class 2
Wiring is factory present to C2 mode

.......more details

Installation manual Sell sheet

95358

Marantec Front Idler Assembly

Complete Roller holder assembly for ML-Series rails
Used for belt and chain drive opener rails
Same as # 8030432

65-52091-16

LiftMaster Manual Hoist Mod. M8 #41 Chain for 16ft High Door

For 3/4 Hp & 1 Hp Trolley operators
Includes floor level brake release cable 1" x 12' round bar.

OSH-6233-ECB-LH

Manaras Opera-SH 3/4 HP 208V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation manual Sell sheet

MOTOR275

Manaras Electric Motor 1HP 208/460V 3PH

Continuous-duty base mount
This item is compatible with BRAKE011

PHOTO-038

Manaras Non-Monitored Photoelectric Cells Nema 4/4X/6P/12/13 Retro-Reflective

Retro-Reflective
24Vac 30' range
Includes 3" reflector

CPT-210-50

Miller Edge Bulk Extrusion 50 ft Roll

For do-it-yourself edges on sectional or rolling doors.
Black
End plugs adhesive and mounting channel sold separately.
Sensing edge size: 1-5/8"H x 1-3/4"W
When combined with the ME123 mounting channel it can be installed on doors measuring 1-1/2" to 2" thick.

Installation Manual Sell Sheet

39-16759

LiftMaster Clutch Pad for EGJ ***NLA NO SUB

UNI-100-122

Uni-Size Bottom Weather Seal 12'2" Long *To extent of inventory*

Fits most standard doors 1-3/8" thru 2" thick
Pliable in all temperatures
Accepts pneumatic or electrical edge
15 pieces per box

T114

Manaras Trolley Track 14ft for 3/4HP & All APT models up-charge *Actual length 198"*

For models MGT/OTH/OTBH 3/4 hp only with Chain #41

361LMC

LiftMaster 1-btn Digital Transmitter 315MHz ***No Longer Available

9 dip switch 315MHz transmitter
Compatible with Commercial operators L3 & L4
Visor clip and battery included (GP23A)

Programming Instructions Instructions de programmation

5001-8-CHARCOAL

Residential Side & Top Weather-Strip 8' Long - Charcoal

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.
Sold by full case quantity (20)

68-9E

Wheel Chock 68-9E Pyramid Rubber with Eye Hook

Handles for chain fastening
Long Lasting 80 Durometer rubber
Size: 8" wide x 9" long x 6" high

97-75000

DOT-C2 Reflective Tape 24" x 2" W 6" Red x 6" White Pattern

DOT-C2 certified exceeds NHTSA requirements
Highly reflective even up to a 90 degree angle
Quick and easy to apply

.375-6-LH-C

Torsion Spring .375 x 6" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .375 ID: 6" Length: 12 ft

12-19504

LiftMaster Flanged Bearing 1" Keyed

MP00013

Micanan Up-Charge Track and #410 (#48) chain for 14' h Door *Actual length 198"*

For 1/3 HP and 1/2 HP operators only

7096

Whiting Cable Drum Assembly for 2-5/8" ID Spring Wire CurbSide (RH)

A Whiting original
Cable drum and bearing

7549

Whiting Winding Cone for 2-5/8" ID Spring Wire CurbSide (RH)

A Whiting original

7550

Whiting Winding Cone for 2-5/8" ID Spring Wire RoadSide (LH)

A Whiting original

SLT14-18P

Rolling Steel 3" Flat Slat 18-ga Primed

GH153-L5

LiftMaster Gearhead with Brake 1-1/2 HP 208/230/460V 3P L5

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

Installation Manual Manuel d'Installation Sell sheet Brochure

.319-6-RH-C

Torsion Spring .319 x 6" x 144" RH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .319 ID: 6" Length: 12 ft

Q310

LiftMaster Surge Protection for MIR-1 ( K74-50271) ** DISCONTINUED

For the Miracle-One single arm gate operator
Same as part no. K74-50271

BK301

Jamb bracket J-01 #1 12 gauge

Sold by the piece
Height 2.40" Length 1.9" Width 2.45"
Bright zinc plated 12 gauge steel
2" long track mounting slot
manufactured to accept ¼” fasteners when attaching to the track and 5/16” to lag to the wall.

SOLID_SHAFT_12'

Solid Shaft 1" Keyed 12 ft Galvanized

Actual length is approx. 12'-1"

SEL2641R433-IP5

Erone 2-Relay Stand Alone Receiver Up to 500 Users 433MHz

2 transmitter keys per user
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
12/24V AC/DC

Wireless System Chart

OTBH-6234-1-ECB

Manaras Trolley Operator 1 HP 208V 3 Ph with Electronic Circuit Board

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

Installation Manual Sell Sheet

OPH-6213-ECB

Manaras Opera-H 3/4HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a self-engaging chain hoist for manual operation
Clearence: side room required 15"

Installation Manual Sell Sheet

K1D7545CC

LiftMaster Control Board Assembly for LA500 ** To Extent of Inventory

014D1065G

OPH-6212-ECB

Manaras Opera-H 1/2HP 240V 1Ph with Electronic Circuit Board

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"
25 cycles per hour 100 cycles per day

.......more details

Installation Manual Sell Sheet

21002

Doorlec Hoist Interlock Switch

MI00002

Micanan Pulley 8" OD c/w Bushing 3/4" ID

75W-RS-BULB

Rough Service Bulb 75W ** Disc. to extent of inventory

82-NH25-03

LiftMaster Set Screw only

For 1/4-20-03

7001-8-W/B

Commercial Side & Top Weather-Strip 8' Long - White and Black (WB)

White galvanized steel with black dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.
Full case quantity only (20)

SCRUBS-PAIL

Scrubs Hand Cleaning Towels 72 Towels per Pail*** Special Order Sold by Quote Only

The citrus-based formula and textured towel combination works to loosen dissolve and absorb the toughest materials
Each pail contains 72 towles
6 pails per case

763

Fasteners Flat Head Carriage Bolt 1/4-20 x 2-1/4" 1000/Box

Full length thread
Max torque = 6

756

Fasteners Slotted Track Bolt 1/4-20 x 5/8" 1000/Box *** Temp Unavailable *** Offer 734

Knurled shank
Max torque = 6

790

Fasteners Hex Nut 3/8-16 1000/Box

41A5389-1E

LiftMaster Receiver Logic Board

For low profile screw drive models with one light
Fits models 2110 2220

Replacement Instructions

772

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2" 1000/Box *** Temp. NLA

7/16" Head
Hex washer high profile head

K21-36793

LiftMaster Transformer 208-230/460 Volts 20Va

230/460V PRIMARY 24V SECONDARY 20VA

K72-12515-1

LiftMaster Limit Switch Kit

For models T H Logic 5 and various L3 L4 commercial operators
Also known as: K75-12515-1 K75-12514

26-14625

Truck Door Top Panel (15" x 98") for Todco DryFreight

These panels are cut to an extra wide width to fit wider vehicle applications
Interlocking tongue and groove design for weather-tight joint and proper alignment.
.75" thick 7 ply exterior grade medium density plywood
Primer finish

CPT4

LiftMaster Passport 4-Btn Remote Control ** Discontinued

The CPT-4 remote operates up to four different Security+ devices.
Three of the four buttons can operate with a telephone entry or access control system .
Great for gated drives or commercial uses.
Passport Technology use with CPWR Wiegard Receiver.
Also compatible with Homelink systems

Programming Instructions

41AC175-2

LiftMaster Electronic Circuit Board Assembly

For Sears / Craftsman garage door opener

PED72

Pedestal Post 72" Gooseneck Pad Mount

Black powder coat finish
Faceplate with universal hole pattern to fit almost any access device
2" x 2" square post
Neck is bent with a 6 in. center radius giving a tight professional look

M3-2314

Marantec 4-Button Transmitter 315 MHz 97244/122468

Same as part # 65893 and 97244
Visor mount
Includes battery CR2032
Made in Germany

Instructions

M3-3313

Marantec 3-Button Transmitter 315 MHz 97245 ** Discontinued

Same as part # 65894 97245
Includes battery CR2032
Made in Germany

Instructions

41A1037

LiftMaster Chassis Bracket

To correct higher level of noise than normal due to vibration from the powerhead.
Fits models 1355 3255 3270 3265-267 made between Jan-March 2014.

SMDRG

Linear 1-Ch Gate Receiver MegaCode 318 MHz *** No Longer Available

High gain superheterodyne receiver
High RFI immunity
Supplied with F-connector whip antenna and mounting bracket
Memory: storage for up to 40 MegaCode transmitters
Power: 24 VAC/VDC
Codes: 1000000+ (MegaCode format)

.......more details

Programming Instructions

BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

For use with 2" rollers
Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
Same as part number 263

.207-258-L

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Brown

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

CABLE_1/8-SS

Cable 1/8" 7x19 1000' Stainless Steel ** Price on request

21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

120/208/240/480V PRIMARY 24V SECONDARY

ME113-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot

.375_6"-LH

Torsion Spring .375 x 6" x 12ft LH Yellow/Green

Wire size: .375
Inside diameter: 6"
Length: 12 ft

.406_3-3/4"-LH

Torsion Spring .406 x 3-3/4" x 12ft LH Blue/Yellow

Wire size: .406
Inside diameter: 3-3/4"
Length: 12 ft

374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

Compatible with wireless keypad model number 377LMC
Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
This transmitter is replaced by 894LT

9V

Battery 9V Alkaline Duracell Procell sold individually

71-B120

LiftMaster Interior Mount Solenoid Brake 115V

Instruction Manual

.192_1-3/4"-RH

Torsion Spring .192 x 1-3/4" x 12ft RH Silver

Wire size: .192
Inside diameter: 1-3/4"
Length: 12 ft

25-60652

Truck Door Reefer Bottom Roller Bracket Assembly for Whiting Style Doors ** To Extent of Inventory

Steel construction Black E-coat finish
Consist of roller clamp wear plate stud plate and 5/16" lock nuts
Stainless steel studs and nuts
Cross ref: 5600

H14G01

Hinge #1 x 14 gauge

Bright zinc plated 14-gauge steel hinge
For use with 7/16" diameter stem rollers
Full body hinge 2-3/4" wide
#1 position
Use between sections 1 and 2 or in the center position
Same as part number 241

.......more details

RADIO-16

Manaras MT2-1000 2-btn transmitter 313 MHz****Replaced by RADIO-EM903

Open/Close remote for 2 doors
Comes with LED battery life indicator
9V battery included
Sunvisor clip included

Programming Instructions

1336.4

Whiting RoadSide Top Panel Closure Bracket for 8" radius track

1336.3

Whiting CurbSide Top Panel Closure Bracket for 8" radius track

GRD

Linear 1-Channel Delta3 Gate Receiver 310 MHz (DNR00101) ***Discontinued

Auto voltage sensing - no jumpers to set
Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 256 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

219109

Capacitor 1/3 HP 43-53 MFD 250V

For LDO33 only

4010-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree

For angle application (180 degree)
For use with Light Brush or Vinyl Insert

4007-8FT

Aluminum Retainer only for Light Brush 90 degree

For angle application
For use with Light Brush or Vinyl Insert.

4002-12FT

45 Degree Aluminum Retainer for Light Brush 12' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

1016-ADHESIVE

Adhesive for Storm Shield 6oz tube

For use with 1016

Safety data sheet

1008-1-3/8"

Bottom Nail-On for Wood Door Light Duty per foot

For 1-3/8" doors.
Color: Black

1006-1-1/2-8'

Rigid Vinyl Bottom Retainer U-Shaped 8' Long

Black with flexible fin to touch door face.
For door thickness 1-1/2"

1104-18FT-DK-BN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Full case quantity only (12).