Devanco Canada - Get The Right Garage Door Opener‎ and Parts

R5209

Cast Iron Pulley 4" **** Indef Delivery

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Cast iron pulley mounted on two pressed sealed bearings
300lb load rating

4X6SC50

Devanco Loop 4' x 6' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

Installation Instructions Instructions d'installation Loop Placement Guide Guide de positionnement des boucles

1371

Whiting Complete Bottom Bracket with Cover

NX21

Allen Bradley 24V Reversing Contactor

Allen Bradley no. 104-C16KJH22-X6
Cat no. 100-C16*10

LIMIT025A

Manaras Single Snap-Action Limit Switch with 'S' Lever

For all Manaras commercial operators prior to 2000 - except light duty models
Can be used on Doorlec Lynx and others
Unimax (SPDT)

Limit Switch Chart

MP00021

Micanan Up-Charge Track and #410 (#48) chain for 24' h Door *Actual length 318"*

For 1/3 HP and 1/2 HP operators only

T-833

FL-Allstar 3-btn 3-Door Transmitter 108817-311 MHz

This three channel transmitter controls up to three doors (open-close) or one door (open-close-stop).
It has a height switches encoder with three positions: + 0 and - .
Manufacturer's model number: 8833T (190-108817)
Dimensions: 4 5/8" x 2 1/4" x 7/8"

Programming Instructions

25-10311

Truck Door Heavy-Duty Lift Handle Zinc

Heavy-duty wide grip design
Zinc plated finish
Cross Reference: T #61401 W #1715 250000

H11G05

Hinge #5 x 11 gauge

11 gauge # 5 hinge - 0.76 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

25-10050

Truck Door Center Hinge Zinc for Todco Roll-Up Doors

Zinc plated Steel construction
Cross Reference: T #61196 T #59126 W #4012 220100

41A5483-2C

LiftMaster Circuit Board Assembly *** To extent of inventory

Assembly includes: Circuit board and end panel
For chain drive units with one light
Fits models 2245 & 2255
Last letter of the part # indicates revision date the most recent product will be sent out

PRO-HB-7511R-LH

Micanan 3/4HP 115V 1P Hoist Operator with Brake and Mechanical Contactor Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Includes solenoid brake
On-Board receiver holds up to 20 transmitters

Installation manual Specification sheet

ST14COP-50

Copper Stop 1/4" 50 Stops per Pkg *price on request

Stops ONLY
Sleeves sold separately part # SL14COP

LIMIT023

Manaras Single Limit Switch with 46 degree Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action.

SGP-311-1-115/1

Doorlec Gate Master 1 HP 115V 1 Phase with Heater

Post mount heavy-duty industrial slide gate operator
Max. gate weight: 2500 lbs
Gate travelling speed: 45 ft / minute
175 watt heater with thermostat included
Includes Omron reflective photocell

RBH103L5-LH

LiftMaster 1 HP 208/230/460 VAC 3 PH Comm. Hoist Op. Logic 5 Left Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

LIMIT020

Manaras Unimax Snap-Action SPDT without Lever

Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
Unimax
Snap-action

.225_2-5/8"-LH

Torsion Spring .225 x 2-5/8" x 12ft LH Orange/Green

Wire size: .225
Inside diameter: 2-5/8"
Length: 12 ft

029-98090

T-Style UDI Replacement Door White Stainless Steel Pkg 029-98090

For openings within 98" w x 90" h
Hardware attached balancer assembly not included
Manufactured to exact size

CPT210-C3

Miller Edge PVC Mounting Channel "L" Shape Sold by the Foot *** Disc. Repl by ME210-C3

Used on CPT-210 extrusion

.343_3-3/4"-RH

Torsion Spring .343 x 3-3/4" x 12ft RH Blue/Red

Wire size: .343
Inside diameter: 3-3/4"
Length: 12 ft

FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz *** Discontinued

Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
Contains 10 DIP switches inside for coding.
Battery included: 12V (GP23A)
Dimensions: 72 x 15 x 40 mm

OGH-6215-M-N1-RH

Manaras 1-1/2 HP 240V 1Ph Gear Head Operator with Monitored ECB N1 Eyes Right Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

K26-438

LiftMaster Artisan Timer

For use with various LiftMaster® Speed Jack Commercial Door Operators
Also known as: 26-438 AB117-00121 G26438 438USA
The DIP switches are used to set the time delay period between 1 and 1024 seconds.
The timer has an internal 1 second delay opening of the DIP switches adds their corresponding value to that internal delay.
The switches to the right are all opened for a total delay of 1023 seconds adding that to the internal 1 second provides the full 1024 seconds.
Any time delay from 1 to 1024 seconds can be achieved by opening the appropriate switches.

.......more details

MKTG-1031-1

EMX Pastic Screw for IRB-4X2

Replacement screw only

28412

Doorlec Flange Bearing 5/8" Bore Oilite Bushing

Works on GH/GHX

210-0202

Hormann/TNR Guide Bottom Lead In Hardware Kit LH/RH

R4AES

Erone Radium 4-Button AES128 Encrypted Remote

Compatible with any high-security AES128 wireless receivers they were designed to prevent the cloning of remotes
The code sent by the remote changes at each activation removing any scanning and copying risk.
A special algorithm ensures a continuous synchronization between the receiver and transmitter
Includes AES128 encryption
Compatible with RADIUM AES128 receivers
Range up to 820 ft (250 m)

.......more details

1-0243

RW Stay Roller 153 Galvanized

For use on #31 square track

AIRSWITCH018

Exterior Air Switch SPDT ABS Housing

801-300-002-01-REFURB

Refurbished 801-300-002-01 Unit

DC300-75-1-WP

Dyna-Hoist 300 Series Direct Drive BBU 3/4 HP 110/240V 1" Shaft 20' Lead Weather-Resistant ** Quote Only

Special-Order. Price by Quote Only
Automated battery backup - the unit continues to work on batteries with full functionality (but does move more slowly) until the unit gets to about 75% of battery capacity then transitions to push and hold operation.
The 300 series also works with and powers 12V automatic lock systems
Option available: 5-conductor cable (5') to reduce the risks of miswiring incidents available in 5' 10' 15' 20' or 25' lengths
Integrated software fuse that shuts down the unit to help prevent board component disasters should these be incorrectly installed on grossly imbalanced or improperly sized doors.
30:1 40:1 50:1 gearbox ratio are available. Please specify when ordering

.......more details

028-200

Blue Giant Proximity Sensor 18mm 2m Cable **Special Order

Price by Quote Only

RCB-DCB3-PRO

Pro Cut Handheld Chain Break #50 Chain Max Version 3

Adjustable chain holder accommodates #65 chain up to #50 chain
Quickly and easily handle chain rivet removal saving you time and effort
Includes two replacement pins inside the handle chamber

CRBH505L5R

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 with Carwash Modification ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

H11G04-SS

Hinge #4 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

TDC41-12

LiftMaster Trolley Chain Pack #41 1200/2200LBS 12ft Door

Chain pack only
TDC41-12 is a #41 Chain Pack Kit for 12 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 12' commercial doors

BCSI-PM03

Pivin Drapeau Hex Bolt 5/8-18 *** Price by Quote Only

OGH-6535-M-N1-LH

Manaras 1-1/2 HP 600V 3Ph Gear Head Operator Monitored ECB w/N1 Eyes Left Hand

A heavy-duty worm gear industrial operator designed for use on industrial standard high and vertical lift sectional doors or rolling doors and grills.
Includes a self-engaging chain hoist for manual operation
25 cycles per hour 80 cycles a day
Hoist on right side standard can easily be moved to the left in field
Full overload protection
BRACKET112 must be used for wall mounting

.......more details

GALV-273-2-R

Cut-to-Length Torsion Spring .273 x 2" Right Hand Wound Galvanized Orange/Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

GALV-393-6-R

Cut-to-Length Torsion Spring .393 x 6" Right Hand Wound Galvanized Orange Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED
Galvanized

CLM125-H

Linear Credential Clamshell Card HID 125kHz Proximity Support 25 pk

Made of sturdy ABS plastic Off White
Complies with the Wiegand communication protocol and is compatible with certain HID prox card readers
Contactless: up to 8" read range
Supports printable 14 mil CR80 adhesive-back PVC cards
Sold in lots of 25
Same as: 830-00420

.......more details

42GRR-9002

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

nput: 70-264VDC/AC

SETR2641AM2KP

Erone 2-Channel Mini Transmitter with Paradox Tag Black 433MHz

With built-in Paradox tag
Heavy-duty construction
Elegant & easy to carry
Unobstructed range: 656 ft (200m)
60 x 36 x 16mm (2.35 x 1.4 x 0.6in)
Two lithium batteries (CR2016) included

.......more details

Wireless System Chart

LJH-353-1/2

Doorlec 1/2 HP 575V 3PH Jackshaft Operator

Heavy duty industrial type control station open close stop 24V. control circuit
Universal mounting right or left
Floor level disconnect device electrical and mechanical
Emergency chain hoist operation on LJH model only
Colour code wiring diagrams
Rotary type limit switches readily adjustable in both directions

.......more details

OTBH-6533-M-N1

Manaras Trolley Operator 3/4 HP 600V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

MODKIT027

Manaras Universal Aux. Output Module B060 Field Install

MODKIT027 for field install simply plugs into the control board
Controls traffic lights
Works with BOARD060
Can only be used on operators with BOARD060 pre-installed for operators built prior to October 14 2010.

50018

Doorlec Photo Switch Polarized Explosion Proof Reflective w/Round Reflector

Class 1 Div 1 Groupes CDEFG explosion proof Certified CSA

RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

178B45

LiftMaster Curved Door Arm (K10-10203)

Also known as: 1010203 105004 10-10203 K10-10203
For use with various LiftMaster® Medium Duty Commercial Door Operators

TDC7-16

Liftmaster Comm. 16FT Trolley Angle set (10-5816-P x 2) and #48 chain pack (TDC48-16) ***Actual length 227"***

Double Angle Rails for doors up to 16'6" high
Includes #48 chain pack

HW0777

Low Headroom Quick Close Device 3" track Sold as a Pair

Includes 1 RH & 1 LH bracket
Heavy Duty for doors up to 16' x 16'

Specification Sheet

P-9931R

Pulsar 1-Channel Receiver 318 MHz

Allstar compatible
Single channel receiver
24V AC/DC
8 dipswitches 318 MHz

GH4416-40

Green Hinge 4-Panel Residential System Set

The Green Hinge System provides a close tight seal of your door to your building eliminating gaps and saving energy and money!
Patented spring-loaded garage door hinge system that allows automatic adjustment of the overhead garage door closing up to 1/4in side gap
Reduces dirt dust bugs rain & moisture
Quick and Simple installation
Fits Residential & Commercial Doors
100% Made & Assembled in the USA

.......more details

6200-2-7-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 5.96" Long Stem

2" diameter white nylon tire
6200 sealed precision bearing
Zinc plated 7.04" Overall Length 5.96" stem
Rating: 100lb; 100000 cycles of a 12′ door

GALV-312-258-144-R

Torsion Spring .312 x 2-5/8" x 12ft RH Galvanized Yellow

Wire size: .312
Inside diameter: 2-5/8"
Length: 12 ft
Galvanized

2200-207

Linear Double Pulley 2" 5/8" Bore HSLG

MAGCRD-25

Linear Magnetic Striped Cards Sold in Pkg 25 *** To Extent of Inventory

Magnetic striped cards
Track II encoded
Low-CO magnetic stripe
Sold in lots of 25
Same as: 0-200025

P-8833T-OCS

Pulsar 3-btn 1-Door O/C/S Transmitter 109372-Compatible 318 MHz

Open/Close/Stop remote for 1 door
Compatible with 3-channel Allstar and MVP receivers
Portable transmitter
Easy access to battery and coding switch
Power: 9-volt battery
Codes: 6561 (set by eight trinary dip switches)

.......more details

GALV-218-2-144-L

Torsion Spring .218 x 2" x 12ft LH Galvanized Yellow/Orange

Wire size: .218
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GALV-218-2-144-R

Torsion Spring .218 x 2" x 12ft RH Galvanized Yellow/Orange

Wire size: .218
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

CT755L5

LiftMaster 3/4 HP 575V 3p Commercial Trolley Op with Carwash Mod Logic 5

Low profile trolley operator with brake included

MGR20-B-2U-M-P/FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Monitored Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty •Monitored edge - pls specify the operator edge is connecting to •Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

E/1929/069

Automatic Systems Round Arm Ass'y 13' (BL229)

Used on the BL229 gate op.

DC1000-125

Dyna-Hoist DC Series Direct Drive Opener 1 HP 110/240V 1ph ** Price by Quote Only

The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
Continuous duty 1 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
Comes with integral absolute encoder to control the door travel
24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
Nema 4 photocell

.......more details

Pulse Series Installation Manuals DC Series Brochure

GALV-234-2-144-L

Galvanized Torsion Spring .234 x 2" x 12ft LH Blue/White

Wire size: .234
Inside diameter: 2"
Length: 12 ft

CRBH753L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 208/230/460 VAC 3 Ph L5 Right Hand

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

185002

Marantec Maveo Bluefi Stick

The maveo bluefi stick brings Wi-Fi connectivity to your residential garage door openers via phone app or the Internet
Compatible only with: Synergy 200 and 300 series IP20 Bluetooth 4.2 also known as 187141 with manufacture date after March 2022.
NOTE: Operators manufactured before March 1 2022 require a control board upgrade in order to be compatible with Maveo products and UL 325 unattended operation. (available soon)

CRBH501L5-RH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5 with Carwash Modification

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

2806.162.220

Whiting .162 x 2-3/16 x 22" Roadside with Cones

GDI-LG920

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 UL325 Photo Eyes Extra

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

K19-48069-NP

LiftMaster Limit Chain Assembly #48 x 69 NP

Compatible with LiftMaster® Model SL585U Slide Gate Operators

GHX-383-1HP-LH

Doorlec Explosion Proof Gear Head 1 HP 208V 3PH ECB Left Hand

Nema 7/9 control box
Electrical connections from motor to control box consists of hazardous location certified fittings and NEMA 7/9 O/C/S push-button station

Q003

LiftMaster Chain Tensioner Bolt w/2 nuts K07-50637

This replacement kit is most commonly used to tighten the attached chain on the sliding gate

DECO-FASTNR-HNGE

Decorative Hinge (Carriage-Style) Fastener Black Sold per Screw

Self Taping screw #8 x 1/2" 18-8 Stainless Steel Black Head
Black crinkle head
Ideal for decorative (carriage style) hinges

L504AL

LiftMaster Monitored Large Profile Resistive Edge w/ Aluminum Channel 4ft

HD8460-REPL-KEY

Replacement Keys for HD8460 Random Code 00-99 Sold per Pack of 100

100 key pack numbered 00 thru 99

210294

SkyLink Trolley Assembly for Tube Rail

LMEL-H

LiftMaster End Link Disconnect Latch

Commonly paired with LiftMaster® Commercial Fire Door Operators and extended performance release devices.
This product is compatible with the following models: LM21XPBB LM21XPBBVB LM21AFCB LM21AFCBVB LM21XP

2BXL

Control Station Exterior Surface Mount O/C N4 with Key Lockout

OPEN-CLOSE Push Button with Lockout
Metal Enclosure
Buttons aligned vertically H=4-3/8"" W=4-1/8"" D=2-5/8""

Installation Manual 2BXL

12-1008

PVC Strip 12" x .120" Standard for Replacement Strip Curtain Sold per Foot

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

OVERLOAD041

Overload Reset 3-Phase 5.5 - 8.0 Amps

5415-2

EMX RAVEN Dual Relay Microwave Motion Sensor

Distinguish between vehicles and pedestrians
Two configurable relay outputs
Adjustable sensitivity and cross traffic suppression
8-23 ft (2.5-7 m) mounting height
Optional remote control for easy programming

104-0011

TNR Chain Tensioner CT3201 ELS16-B1

Ansi #80

102-0002

TNR Hardener CH-EST-002 Black 24/Box

Shaw Almex

19-40100-SS

Roller Chain #40 Stainless Steel 100ft Pack

100ft length Stainless Steel

BCH501L5L-BZ

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. LH ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

MAREDLED12

LiftMaster Red LED Light Strip 12 ft Long

Red LED light strip for MALED12

CAMPLATE012

Manaras Cam Plate MTH/MTBH N1

MH00002

Micanan Mild Steel Bushing 9/32" ID x 13/32" OD x 1-1/16" (Brake Option) *** No Longer Available

C-34X16-134-W-G/T

Thermal Window 34" x 16" for 1-3/4" Door White Frame Grey Tint Glass

For 1-3/4" thick door

BCH751L5R-BZ

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. RH ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

TRACK-SET-3-134-12

3" Tracks Set 12'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

20FT-TROLLEY-SET

LiftMaster 20ft Double Angle Rail Set for Comm. Trolley Ops (2 pcs)

Double Angle Rails for doors up to 20' high
Works with models : MT T GT APT
Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us

111087.0001.S

Overhead Transformer 120/208/240V - 1 Phase

works on various Genie ops ie GCL-GH

1184HD

Whiting Hold Open Device 1184 Heavy-Duty Track Mount

This is a field install accessory.
Also known as: Positive Stop Assembly
This is installed onto the panel when the door is opened it is engaged and will keep the door open above the header so there is no hang down of the door.
The door will stay open above the header to eliminated the door being damaged.