Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Emx Industries Inc.
IRB-RET2-KIT

EMX Industries Universal Retroreflective Photoeye Nema 4X W/Reflector Hood New UL325

  • Universal UL325 Retroreflective Photoeye Kit
  • Compact design
  • Easy LED alignment
  • Easy-to-Adjust Ball & Socket Bracket
  • Rugged NEMA 4X enclosure
  • Integrated sensor hood improved reflector hood and ball & socket bracket
    • .......more details
VMD202-R

EMX Remote Tuning and Adjustment Control Device

  • If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
  • The VMD202-R may then be removed or left in place as desired.
VMD202-50

EMX Vehicle Motion Detector Probe with 50ft Lead Wire

  • The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
  • The probe and its electronics are housed in a slim design that is buried next to a driveway.
  • The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
  • Probe assembly and wire are water tight and direct burial compatible
  • Harness is pre-wired onto lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
    • .......more details
NIR

Emx Industries Retro Reflective Photoeye Sensor with Reflector (5200-2)

  • Watertight packaging
  • Detection range: 30 feet
  • 6 foot cord
  • Reflector Bracket and mounting hardware Included
  • 2 LED indicators
  • Sensitivity adjustment
    • .......more details
Installation ManualSell Sheet
TSTL

EMX Test Loop

  • Electrical diagnostic tool for loop and vehicle detectors
  • Two-wire: red and black
  • Dimensions: 1.25 inches (H) x 1.25inches (W) x .75inches (D)
  • Compatible with most brands of loop detectors
D-TEK-MVP

EMX Industries 9-220 volt Loop Detector 2550-1

  • Wiring harness ( HAR-11) sold separately
  • Warranty 2 years
  • Aluminum RF shield housing
  • Loop diagnostics
  • Frequency counter
  • Control contacts (gold plated)
    • .......more details
Installation ManualSpec Sheet
IRB-MON2

EMX Industries Universal Thru-Beam Photocells UL325 Built in Hoods

  • Kit includes transmitter receiver integrated protective hoods and removable lens sunshield
  • Thru beam configuration
  • UL325 compliant
  • Four (4) monitoring interfaces
  • 115 ft. operating range
  • Easy installation and set-up
    • .......more details
IRB-4X2

EMX Nema 4 Through-Beam Photocells EMX-1250-1 Hood Sold Separately

  • The IRB-4X2 photoeye is used as a safety reversing or opening device in conjunction with automatic operators.
  • The IRB-4X2 will work with any control board that accepts dry contact on the input.
  • The easy to install IRB-4X2 is used with garage doors rolling doors parking barriers and other equipment.
  • *Not for use in applications requiring UL325 compliance
  • Thru beam design is not affected by shiny surfaces
  • Wide 24˚ transmission angle allows easier alignment and increases reliability
    • .......more details
Spec sheet
PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
BPE-50

EMX Industries Battery Powered Through-Beam Photocells EMX-1500-1

  • Thru beam configuration
  • 90° adjustment left or right
  • The transmitter and receiver use 12-24 VDC/AC but the BPE-50 can also be powered by two 3.6-volt lithium batteries (Batteries Included)
  • 50 ft. operating range
  • Size: 4.4" (112mm) x 2.05" (52mm) x 1.3" (33mm)
PROBE-50

EMX CARSENSE-101 Direct Burial Probe with 50' Lead Wire

  • Wand only
  • Requires CS101 (Carsense-101)
CARSENSE-101

EMX Buried Driveway Alert Sensor XC101-LV Probe Sold Separately (CS101)

  • The CarSense 101 provides a solution for many vehicle detection challenges. Where safety is an issue the CarSense 101 detects moving vehicles in blind areas along a driving path and actuates warning lights.
  • For access control applications requiring free exit the CarSense 101 detects vehicles and actuates gates overhead doors and other parking barriers.
  • Controls and indicators are mounted on front panel
  • Available in 9 - 41 VDC 6 - 29 VAC.
  • Low 2.5 mA standby current consumption makes it an excellent choice for solar power applications.
  • Housed in a small relay-type housing
    • .......more details
Installation ManualSell Sheet
CARX-20

EMX Accessory Access Card 5404-1

  • 3.4" x 1.2" x 0.1" (ISO standard size)
  • Reinforced for long life
  • Mifare 26 bit Wiegand Format
  • Durable access card for use on the CR-2000 and PRX-320
  • Easy and convenient use - just swipe in front of sensor
  • Secure and can be disabled individually at any time
    • .......more details
HAR-11

EMX Wiring Harness 11-Pin for D-TEK-MVP 5111-1

  • Universal 11-pin harness
LRS-LC

EMX Logic Controller

  • For use with the Loop Replacement System (LRS-C1) Magnetoresistive Vehicle Detector Control Unit
  • Connects two stand-alone sensors to expand the detection area
  • Works with LRS-DB (LRS-DB-50 or LRS-DB-100) Direct Burial or LRS-FP Flat Pack (LRS-FP-50 or LRS-FP-100)
  • Logic Interface allows one (1) or two (2) sensors to be connected to one (1) output
  • Provides six (6) selectable logic functions and two (2) separate relay outputs
  • A/B directional logic can be selected with an output for each direction of travel as a vehicle passes over two sensors
    • .......more details
LRS-DB-50

EMX Direct Burial Sensor with 50 ft Lead Wire

  • Lead probe ONLY. Requires the LRS-C1 detector
  • Three-dimensional presence detection of vehicles
  • Select X Y Z axis independently
  • Stand-alone sensor
  • Sensor stores ambient background and settings in non-volatile memory
  • Includes direct burial sensor and 100 ft of lead wire
    • .......more details
LRS-C1

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

  • The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
  • Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
  • The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
  • Backwards compatible with CS303 sensors
PTM-24V

EMX 7 Day Programmable Timer 24V

  • The PTM is an easy to program 7 day timer that provides secure access to any facility any time.
  • With up to 16 ON/OFF events per day and 15 different daily options.
  • Its DIN rail mount design and wide power supply options (12 24 or 120 Volt) make installation easy.
  • The battery backup saves stored programs in the case of power loss.
  • Select either a 12 or 24 hour clock format to program access times for overhead doors gates and parking barriers.
  • The PTM can reduce the wear and tear on motor controls and extend the life of your equipment.
    • .......more details
Instruction manualSpec sheetComparison guide
ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

  • Features a slim design that is compatible with most gate operators that require a dry contact relay input.
  • No harness required; comes with terminal screw adaptor
  • ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
  • Frequency count/reset switch
  • 10 sensitivity settings
  • Loop diagnostics
    • .......more details
IRB-SP

EMX Industries Liquid Tight Strain Relief Connectors Sold as a Pair