Devanco Canada - Get The Right Garage Door Opener‎ and Parts

BK104

Spring Anchor with Bearing 3-3/8" 13-gauge Sold per Piece

For residential applications. Use CBS-338 for commercial / industrial applications
Zinc plated 11-guage steel
1" bore bearing installed
Single clipped end

BK010

Commercial Top Bracket Adjustable 1-Bolt Sold per Piece

Galvanized steel
12 gauge roller carrier and base plate
Adjustment of 7/16" minimum to 2-3/16" maximum
Good for use with 3" hardware

229557

Torque Force EZ Low Headroom Conversion Kit

Reduced headroom as low as 8"
Convert a standard lift door to a low headroom door without using an outside hookup configuration.
Easy to install 3 piece kit
Fits on 15" radius and 12" tracks

XT2563-CUT

Xcluder Rodent Block 3" Black Sold per Foot

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

124773

Roller 3" UHMW 7-1/4" Stem Rubber

3" UHMW tire covered with rubber
6202 sealed precision bearing
7-1/4" zinc plated stem
Rating: 200lb load; 10000 cycles of a 12' door
Helps quiet the operation of jackshaft operators

.250_1-3/4"-RH

Torsion Spring .250 x 1-3/4" x 12ft RH Green

Wire size: .250
Inside diameter: 1-3/4"
Length: 12 ft

RENO-BX4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector

The Model BX is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
Eight detection sensitivity levels are selectable by means of a front panel mounted rotary switch external dip switches
Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep

Installation Manual Sell Sheet

RN1124-10

Roller 2" Nylon 4" stem 11 ball White 10/PKG Sold per Pack

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.69"
Box qty: 15 packs of 10 Box weight: 49 lbs (2-4-11 White Nylon)

BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

For use with 2" rollers
Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
Same as part number 263

.375_3-3/4"-LH

Torsion Spring .375 x 3-3/4" x 12ft LH Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft

.375_3-3/4"-RH

Torsion Spring .375 x 3-3/4" x 12ft RH Yellow/Green

Wire size: .375
Inside diameter: 3-3/4"
Length: 12 ft

CHS401

Chain Hoist Shaft Mount 4:1 JR 4020 Torque Force (126684)

Shaft Mounted Junior Hoist
4:1 Reduced Drive
Sprocket: 41B36. Bore size: 1" diameter
Cross Reference: OMI 4020
Requires minimum 3/8" center line offset.
Set includes: 26' of hand chain 22" of #41 roller chain Chain keeper (2) shaft collars 1/4" square key and a wall stabilizer bracket.

.......more details

Sell sheet

RS1027

Roller 2" Steel 7" stem 10 ball

Steel Roller Wheel Diameter: 2"
Working Length: 6.25" Overall Length: 7.25"
Box qty: 180 Box weight: 73.5 lbs (2-7-10 steel)

H12G03-SS

Hinge #3 x 12 gauge Stainless Steel **NLA

Manufactured with 12ga. Rust-Resistant Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

02-103

Push Button Station 3-btn Surface Mount Metal Housing

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

SF200

Spring Fitting 2" Pair

Unviversal thread for use in either LH or RH wound springs.
Pair includes: (1) winding and (1) stationary.
Maximum wire size diameter: .3065".
Set screw installed: 3/8"-16 x 1" (2).
Mounting: 1" tube or solid shaft
Winding bar hole 1/2"

.......more details

.331-334-L

Cut-to-Length Torsion Spring .331 x 3-3/4" Left Hand Wound Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.331-334-R

Cut-to-Length Torsion Spring .331 x 3-3/4" Right Hand Wound Red/White

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

C-334-INSTALLED

Cones 3-3/4" Factory Installed (Pair)

For do-it-yourself installation use part no. SF375

.273-2-L

Cut-to-Length Torsion Spring .273 x 2" Left Hand Wound Orange/Red

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login