Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Misc Garage Door Dock & Gate
SF514-S

Spring Fitting 5-1/4" Stationary Side Only for 1" & 1-1/4" shaft

  • Can be used with either 1" or 1-1/4" winding cones
  • Includes: (1) stationary side only.
  • 2 x 3/8-16 thread holes at CC=4.25"
TVB420-11SF

Steel-Faced Laminated Bumper Black 5 1/4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
Drawing
PD1614B000

NICE Aluminum Flange Bar 300MM Insert For MBAR up to 7M

LB412-18

Laminated Bumper Standard Black 12" x 18" 4" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
28301

Insert Bearing Pillow Block Hy-Speed 1"

  • ASPP-205
3-4734

Serco Bell Crank ** Price by Quote Only

  • For Serco loading docks
3-4742

Serco Lip Assist Bar ** Price by Quote Only

  • For Serco loading docks
238-202

Serco S-Hook ** Price by Quote Only

  • For Serco loading docks
586-1072

Serco 3/4" dia x 2-1/8" Grooved Pin ** Price by Quote Only

  • For Serco loading docks
234-143

Serco 3/4" SAE Flat Washer ** Price by Quote Only

  • For Serco loading docks
236-110

Serco 3/4" Klip Ring ** Price by Quote Only

  • For Serco loading docks
SMF5034

Serco Spring and 6' Snubber Assy Kit *** Price by Quote Only

  • Dock Leveler 6' Snubber assy. kit chain chain stop shackles & extension spring.
  • For use with Serco brand dock levelers.
99119671

Amarr Bottom U-Seal 3.5" Black Double Dovetail Vinyl 1/4" T 200' Roll

  • 1/4" T width
  • Used on Amarr Residential Open Back Doors and Classica models
99000568

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T 200'

  • 1/4" T width
  • Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)
JDMG-LG-2030

GDI Jackshaft DC 115V

  • Brushless DC high reliability high efficiency and low maintenance motor
  • No maintenance GearMotor sealed stainless steel bearings no limits switches no belts or no hydraulic cylinders to maintain
  • Soft start soft stop
Sell sheetTechnical document
745317

Strobe Low Profile Amber Lens Industrial Strobe

  • Polycarbonate lens
  • Single flash
  • Dimensions: 4" H x 5" diameter base
  • Available in surface mount or magnetic mount
LB812-36

Laminated Bumper Standard Black 12" x 36" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB812-24

Laminated Bumper Standard Black 12" x 24" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB812-18

Laminated Bumper Standard Black 12" x 18" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
LB812-12

Laminated Bumper Standard Black 12" x 12" 8" Projection Horizontal Installation

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details