Devanco Canada - Get The Right Garage Door Opener‎ and Parts

BK104

Spring Anchor with Bearing 3-3/8" 13-gauge Sold per Piece

For residential applications. Use CBS-338 for commercial / industrial applications
Zinc plated 11-guage steel
1" bore bearing installed
Single clipped end

.406_6"-LH

Torsion Spring .406 x 6" x 12ft LH Blue/Yellow

Wire size: .406
Inside diameter: 6"
Length: 12 ft

ALUM-5P5

Aluminum 24" x 100' Spool Graphite # 5P5

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 5P5
Reverse side is #431 Bright White

Colour chart

.207_1-3/4"-RH

Torsion Spring .207 x 1-3/4" x 12ft RH Brown

Wire size: .207
Inside diameter: 1-3/4"
Length: 12 ft

LVB420-11SF/P2

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P2

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

LVB420-11SF/P1

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

.312_6"-LH

Torsion Spring .312 x 6" x 12ft LH Yellow

Wire size: .312
Inside diameter: 6"
Length: 12 ft

.273_2"-LH

Torsion Spring .273 x 2" x 12ft LH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

.273_2"-RH

Torsion Spring .273 x 2" x 12ft RH Orange/Red

Wire size: .273
Inside diameter: 2"
Length: 12 ft

.406_6"-RH

Torsion Spring .406 x 6" x 12ft RH Blue/Yellow

Wire size: .406
Inside diameter: 6"
Length: 12 ft

LB610-102

Laminated Bumper Standard Black 102" x 10" 6" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 7/8” diameter.

.......more details

XT2564-CUT

Xcluder Rodent Block 4" Black Sold per Foot

For commercial and residential applications
Creates a tough barrier that is virtually impenetrable to rodents

Sell Sheet

218757

Torque Force Spring Failure Device 1" Shaft Left Hand Side DT0054

For springs 2" up to 6"
This device can be applied on Industrial OH doors that are manual or motor operated
Must be installed on a keyed shaft

.283_2"-LH

Torsion Spring .283 x 2" x 12ft LH White

Wire size: .283
Inside diameter: 2"
Length: 12 ft

.319_3-3/4"-RH

Torsion Spring .319 x 3-3/4" x 12ft RH Blue/Green

Wire size: .319
Inside diameter: 3-3/4"
Length: 12 ft

.283_2"-RH

Torsion Spring .283 x 2" x 12ft RH White

Wire size: .283
Inside diameter: 2"
Length: 12 ft

.312_5-1/4"-LH

Torsion Spring .312 x 5-1/4" x 12ft LH Yellow

Wire size: .312
Inside diameter: 5-1/4"
Length: 12 ft

Z9966

Deuer Cable Puller

Light duty wire and cable gripping tool
For wire 1/16" - 1/4" diameter
Recommened for residential use only
1300 lbs. capacity

BK027/PR

Commercial Bottom Bracket 1-3/8" 2"or 3" Inside Hook Up BB-4 Sold as a Pair *Includes (1) Right and (1) Left Bracket (2) Clevis Pins (2) Cotter Pins*

Includes 1 left and 1 right hand bracket
BB-4 SF

.312_5-1/4"-RH

Torsion Spring .312 x 5-1/4" x 12ft RH Yellow

Wire size: .312
Inside diameter: 5-1/4"
Length: 12 ft


User Name:
Password:
Remember Me:

	Forgot your password
Request a Login