Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Misc Garage Door Dock & Gate
PDC-300-075-1.25-40/75-20

Pulse 300 Direct Drive Opener 3/4 HP 1.25" shaft 110/240V 1ph 40:1 20' Cable

  • Advanced speed control: up to 24"/s opening up to 16"/s closing
  • Built-in 24V 9Ah battery backup
  • Soft start/stop functionality
  • Universal single-phase power compatibility: 110-240V 50/60Hz
  • Adjustable force monitoring
  • Programmable closing timer: 1-99s A high-performance direct-drive door operator with a 90V DC horsepowerrated motor engineered for balanced commercial and industrial doors
    • .......more details
28103

Pillow Block Bearing Cast Iron 1" Bore

345

Cable Clamps Galvanized 1/8" 100/pkg

  • Galvanized malleable cable clip
NTE5326

Bridge Rectifier 25A 600V

  • Bridge Rectifier Converts AC to DC voltage
  • For powering DC accessories when AC transformer present
  • Small size with convenient mounting hole in center
  • Same as MCCM2506-RH
Characteristics
TR-GUARD

Track Guard Z type 60" high to Protect 3" Track Sold as a Pair

  • Provides impact protection to vertical track
  • 11 gauge (.125 thick)
  • Galvanized steel no paint
Z9965

Bearing Blaster

  • Fast and easy way to remove and re-seat bearings into bearing plates
  • Works for both 1" and 1-1/4" bearings
  • Instructions included
Instructions
G-21X13-134-CHRCL

Thermal Window Clear 21" x 13" for 1-3/4" Garaga Door Charcoal

  • For 1-3/4" thick door
C12

Felco C9 Cable Cutter 3/8" Capacity

  • The FELCO C12 a two-hand wire and cable cutter designed for precision.
  • Made with unbreakable forged aluminum handles and high-quality hardened steel blades
  • The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
  • Length: 19.69 in
  • Weight: 3.75 lb
  • Cutting diameter: 0.47 in
    • .......more details
Z9959

Tension Release Hub Torsion Spring Back Winder

  • Safely back wind the torsion springs in tricky “slipped cable” situations
  • Easily slide and tighten the solid steel hub on either end of the torsion shaft to back wind the torsion springs using a 5/8" winding bar unwrap and re-install the cables on drum
  • Can be used on 1" solid or hollow shafts
Z9966

Deuer Cable Puller

  • Light duty wire and cable gripping tool
  • For wire 1/16" - 1/4" diameter
  • Recommened for residential use only
  • 1300 lbs. capacity
Z9211-3

Stationary Cone Tool 3-3/4"

  • Easily dislodges the cone from the torsion spring
RENO-B4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector *** To Extent of Inventory

  • The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
Installation manualSpec sheet
LMA-1250-LV

Loop Detector with Deflectometer 1 channel 2 output 11 pin 12 - 24 VDC or 24 VAC *** SPECIAL ORDER subject to min dollar amount

  • The LMA-1250-LP operates with extremely low power requirements making it suitable for solar and battery powered applications
  • LMA-1250-LP operates on 12VDC or 24VDC nominal. Power consumption in the No Detect state is less than 4 milliamps at 12 VDC and less than 3 milliamps at 24 VDC
  • With a typical size vehicle over the roadway loop the DEFLECTOMETER® functions as a Sensitivity Meter.
  • The optimum sensitivity setting should provide a reading of “5”. You can adjust the DEFLECTOMETER® reading by using the front panel UP or DOWN sensitivity buttons.
  • Automatic quantitative feedback of the loop system operation ensures that the detector is set to the most optimum sensitivity level to detect ALL vehicles including motorcycles and high-bed vehicles
6062

Programmable Timer *** To Extent of Inventory

  • 12VDC or 24VDC operation is selectable
  • Functions include: One shot Delayed release Delayed operate Delayed pulse and Pulse / Flasher.
  • Momentary relay activation at the end of a desired timing cycle eliminating the need for having to use 2 timers to achieve this function
  • LED indicates relay is energized
  • Form C relay contacts are 8 amp at 120VAC / 28VDC
Installation instructions
.343_2-5/8"-LH

Torsion Spring .343 x 2-5/8" x 12ft LH Blue/Red

  • Wire size: .343
  • Inside diameter: 2-5/8"
  • Length: 12 ft
794

Fasteners Keps Nut 5/16-18 1000/Box

  • Lockwasher & nut combination
101475

Insert Bearing 1-1/4" Bore SB206-20

  • Works with Flangette Retainer 102079
LB410-14SF/P1

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
29-NP812

Lead Acid Battery 12V 8A

  • Also known as: 29NP0812 K29-NP08-12 29-NP08-12
.393_3-3/4"-LH

Torsion Spring .393 x 3-3/4" x 12ft LH Orange

  • Wire size: .393
  • Inside diameter: 3-3/4"
  • Length: 12 ft