Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Misc Garage Door Dock & Gate
.319-6-LH

Cut-to-Length Torsion Spring .319 x 6" Left Hand Blue/Green

  • Spring wire only. Cones and Filler extra
.319-6-RH

Cut-to-Length Torsion Spring .319 x 6" Right Hand Blue/Green

  • Spring wire only. Cones and Filler extra
798

Fasteners Cotter Pin 3/32" x 1" 100/Bag

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required.
  • 5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
  • Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
  • Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
  • Brackets to be punched with elongated holes to allow steel face to "float" upon impact.
    • .......more details
LVB420-11/P1

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

  • For use in low to medium traffic loading docks in factories and warehouses.
  • Can be used as rub rails at the sides of truck wells
  • Fabric reinforced rubber pads cut from recycled truck tires.
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 1” diameter.
    • .......more details
Specification Sheet
LB410-14SF/P1

Steel Faced Laminated Bumper Black 10" x 14" 4" Projection Horizontal Installation

  • Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
  • Can be used in material handling application where medium to heavy dock protection is required
  • “Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
  • Rubber pads laminated between steel angles and secured with 3/4” rods
  • Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
  • Wall mounting hole size is 7/8” diameter.
    • .......more details
Z9959

Tension Release Hub Torsion Spring Back Winder

  • Safely back wind the torsion springs in tricky “slipped cable” situations
  • Easily slide and tighten the solid steel hub on either end of the torsion shaft to back wind the torsion springs using a 5/8" winding bar unwrap and re-install the cables on drum
  • Can be used on 1" solid or hollow shafts
LEDSTRIP003

LED Light Strip (1 Unit) Red/Green/Blue 46" 24VDC

  • An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option
BK111/PR

End Bearing Plate Flanged Heavy Duty 8-GA 3-3/8" without Bearing. Sold as a pair

  • They have 4 slots surrounding the hole to accommodate a regular bearing (with flange).
  • A pillow block bearing could be used if needed
  • Includes (1) RH and (1) LH plate
R6000

Shaft Collar 1" with 2 Set Screws

  • Set Screws: 5/16 x 18
R5999

Shaft Collar 1" with 1 Set Screw

  • Set Screw: 5/16 x 18
Z9403

Coupler 1" Bore Adjustable Silver

  • Malleable Iron for strength
  • Set screws and jamb nuts installed
  • 1" bore with 1/4" keyway
  • Thickness: 0.35"
  • Painted silver
124773

Roller 3" UHMW 7-1/4" Stem Rubber

  • 3" UHMW tire covered with rubber
  • 6202 sealed precision bearing
  • 7-1/4" zinc plated stem
  • Rating: 200lb load; 10000 cycles of a 12' door
  • Helps quiet the operation of jackshaft operators
TN29C

Wire Nuts (Marrette) Grey 22-14 AWG 100/Pkg

  • Screw-on connector
  • Wire Range: 22-14 AWG (Max = 1 x 14AWG wire with 1 x 20AWG wire & Min = 2x 22 AWG wire)
  • Rating: 105C (221F)
  • Voltage: 300V
  • Approval: CSA UL486C Listed
LEDSTRIP006

LED Light Strip (1 Unit) Red/Green/Blue 120" 24VDC

  • An auxiliary output module is required enables connection of 24VDC LED light strips. MODKIT168A is an option
Installation Manual
R5211

Cast Iron Pulley 5" with stud

  • 5" Cast Iron Pulley with double stud
  • cast iron pulley mounted on two pressed sealed bearings
  • Maximum cable diameter: 1/4"
.295-258-R

Cut-to-Length Torsion Spring .295 x 2-5/8" Right Hand Wound Blue

  • Priced per inch
  • For factory installed cones priced seperately - use part no. C-258-INSTALLED
50-107-30

Take-Up Reel 3-Wire Metal 30ft Extended

  • 3- wire 18-gauge
  • Also called Reel Cord
R5209

Cast Iron Pulley 4"

  • Bored for 3/8" diameter bolt
  • Maximum cable diameter: 1/4"
  • Cast iron pulley mounted on two pressed sealed bearings
  • 300lb load rating
25-42-80

Extension Spring 7' Door - 80 lbs Gold

  • Double - Loop
  • 25" long 42" stretch 80 lb load
  • Sold individually
  • Rated for 10000 cycles
Spec Sheet