Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login

21002

Doorlec Hoist Interlock Switch

VBELT_4L355

Doorlec VBelt 4L 35.5" *** NLA

  • Same as part number 19045
OPH-6232-ECB

Manaras Opera-H 1/2HP 208V 3Ph with Electronic Circuit Board

10-30701M

LiftMaster Chain Guide Tray for SL595

  • The tray located between the 2 chain guides.
  • Chain guides are not included.
18004B

Genie Motor Start Capacitor 220VAC 50-60 MFD

  • Compatible with most 1/3 HP Genie & Overhead operators
41A5615

LiftMaster Chain Spreader

  • For models 2575 3575 3275 PD752 PD758 and others
27220A

Genie Limit Switch Chain Drive

  • Compatible with the following operators: PMX700 GPS700-IC PMX1200 GPS1200-IC PMLD500 PMX500-IC/B PMX300-IC/B IC250/B PMX60-65-70-75-80-85-300IC-500IC-IC250 among others
  • For chain drive models with internal limits
9150000629

3/16" Stops ONLY 100/pkg

  • Stops only 100 per pack
34538S.S

Genie Magnetic Close Down Limit Switch Assembly 138"

  • For Chain Glide models
104100

FAAC Hydraulic Swing-Leaf Gate Operator S450H 24VDC

  • Hydraulic operator for residential and condominium swing gates with single-leaf max width of 3 m (SB) and 2 m (CBAC).
TCR-1

Tri-Code Receiver Single Channel ** DISCONTINUED

  • Single channel receiver compatible with Linear Delta Multi-Code and Stanley radios
  • Three position direct connect tabs for commercial and residential garage door openers
7001-8-W/B

Commercial Side & Top Weather-Strip 8' Long - White and Black (WB)

  • White galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
  • Full case quantity only (20)
MOD021A

Manaras Safepack 24V Control Circuit

  • A safepack module is used as an "Intrinsically Safe Barrier Relay" and in hazardous locations with non-voltage producing sensors allowing the user to use a N.O. non-monitored sensing edge.
BRACKET112

Manaras Wall Mount Stud Bracket

  • This Wall Mount Bracket can be used with all Manaras Wall Mount commercial operators except the MRGH and MGH models
  • Will not work will Trolley Operators
MA025

LiftMaster Padded Barrier Arm Yellow 12ft

  • For use on Mega-Arm gate operator
MV-00297

Micanan Commercial Wireless Keyless Entry 372 MHz

  • Will work on Micanan commercial operators that have an on-board receiver
  • If there is no receiver then MK-00648 is required
  • Same as MV-00086
C-600-INSTALLED

Cones 6" Factory Installed (Pair)

  • For do-it-yourself installation use part no. SF600
7001-8-BLACK

Commercial Side & Top Weather-Strip 8' Long - Black (Code B)

  • Black galvanized steel with black dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
790

Fasteners Hex Nut 3/8-16 1000/Box

786

Fasteners Hex Nut 1/4-20 1000/Box

774

Fasteners Hex Head Bolt 5/16-18 x 3/4" 1000/Box

  • 5/16" bolt has 1/2" head
  • Max torque = 12
  • Full thread
  • Grade 2/Grade 5 depending on availability
RBH501L5-LH

LiftMaster 1/2 HP 115/230 VAC 1 PH Commercial Hoist Operator Logic 5

  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Brake standard on all RBH operators
  • #48 chain #50 output sprocket chain
  • Comes with CPS-U photoeyes and 02-103 O/C/S push button
  • .......more details
029C98200-PRIMR

W-Style Complete Repl. Door Primer only

  • Primer only no stainless steel package.
  • For doors upto 98" wide x 100" h
  • Fully assembled door manufactured to exact size with all tracking and spring operator assembly
  • Price varies according to size
STAR450-390

LiftMaster Commercial Access Control Receiver 390MHz *** To Extent of Inventory

  • Rapid learn feature programs multiple transmitters in just seconds
  • Ideal for gated communities parking lotsand garages.
75-10174

LiftMaster Trolley- Front Idler Assembly

  • Also known as: 7510174 305115018 711150181 175017 71115211 75-10174
K001D8073-1

LiftMaster Three Phase Relay/Power Board 230/460V (K001D8397)

  • For Logic 5 commercial operators
  • 014D1279E
  • New part number K001D8397
772

Fasteners Lag Screw Hex Washer High Profile 5/16" x 2" 1000/Box *** Temp. NLA

  • 7/16" Head
  • Hex washer high profile head
CH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. 3/4 HP 115/230 VAC Logic 5 Right Hand

  • Industrial Duty Hoist Operator with Damp Environment modification.
  • Comes with either CPS-UN4 or CPS-RPEN4 photoeyes
H501L5-LH

LiftMaster Ind. Duty Hoist Op. 1/2 HP 115/230 VAC Logic 5 Left Hand *** No Longer Available

  • Includes CPS-U
  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door. Connectivity
  • MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • .......more details
V1001-B

Elton Dual Fin Vinyl Insert Black Price per Foot

CPT4

LiftMaster Passport 4-Btn Remote Control ** Discontinued

  • The CPT-4 remote operates up to four different Security+ devices.
  • Three of the four buttons can operate with a telephone entry or access control system .
  • Great for gated drives or commercial uses.
  • Passport Technology use with CPWR Wiegard Receiver.
  • Also compatible with Homelink systems
71B575G

LiftMaster Brake Kit 575V with Solenoid Field Install SL585 and SL595

  • Kit comes complete with: Brake hub kit brake release lever brake disk spring cup studs compression springs brake solenoid solenoid cover spacers mounting plate pressure plate feather key and conduit.
MX00037

Micanan Brake Assembly for PRO-J/H Solenoid NOT included

  • Brake assembly does NOT include the solenoid
MK500GS

LiftMaster MiniKey Stand-Alone Keypad System ** No Longer Available

  • Self-Contained Keypad System for Door and Gated Entrances
  • 500 Code capacity
  • Grained stainless steel Surface Mount
  • Dimension: 4-1/2" H x 4-1/2" W x 3-1/2" D
  • Same as SN7000255
  • Sentex Keypad
  • .......more details
1005-2-12'

Aluminum Bottom Retainer U-Shaped 12' Long***Actual Length 12'2"***

  • For door thickness 2"
K74-34582-1

LiftMaster Plastic E-Box Assembly for LA500CONT

  • Plastic replacement box only
27-20113

Truck Door W-Style Spring Assembly Roadside 33" Long

  • Wire thickness: .182
  • Spring length: 33 inches long (assembled length)
  • Inside diameter: 1.188
  • Includes cable drum and bearing assembly winding cone wound onto spring for stronger desgn and internal spring spacer.
423LMC

LiftMaster 3-Channel Co-Axial Receiver 390 MHz

  • 8" coaxial antenna included
  • Used for open/stop/close on commercial motors
  • N/O and N/C selectable
  • Compatible remote: 33LM
2704.171_250

Whiting Roadside Torsion Spring 2-3/16" ID 25" Long

  • Torsion spring wire only
  • .171 wire size
PROMI-500

Erone 1-Door Stand Alone Card Reader / Keypad **DISC

  • 500 users (proximity badges and/or codes)
  • 3 operating modes: - Mode 0: badge and code - Mode 1: badge only - Mode 2: badge or code
  • Audible & Visual feedback
  • 1 request-to-exit input
  • Tamper switch
  • 1 form C door relay output (3A/125V)
  • .......more details
24851

Stanley Traveler Carrier Kit

  • Works with all Stanley chain drive units from 1992-present
  • Same as part no. 9200014
  • Trolley slider for part no. 49563
UCFL-1

Self-Aligning Cast Flange Bearing Football Style 1" Bore UCFL205-16

  • Grey cast iron painted.
  • Comes with 2x set-screws
  • Football style 2 bolt
UCF-1

Self-Aligning Cast Flange Bearing 1" Bore UCF205-16

  • Grey cast iron painted.
  • Comes with 2x set-screws 1/4-28
  • Square 4 bolt
DF086.1

Whiting Dry Freight Door 3/4" with Track Balancer Standard Hardware and Side Seals

  • Includes side seal upgrade
22-00626

Truck Door Grab Handle 13" Zinc Plated ** This is no longer available

  • Steel construction Zinc plated
  • Cross ref: Eberhard 4300
BK000

Residential Top Bracket Adjustable 1-Bolt Sold per Piece

  • Same as part number 3-31-1
  • Sold per piece - not a pair
28-32085

Truck Door 2" Vertical Track with Holes 95.00" Long for Whiting Roll-Up Doors *** To extent of inventory

  • Galvanized steel 14-gauge construction
  • Tabbed at both ends for proper alignment at track joints and to allow universal fit for both left hand and right hand frame sides.
  • Holes drilled to allow for faster plug weld installation to frame
  • For use with 2" diameter steel or nylon rollers
CR-2000

EMX Keypad/Card Reader Waterproof 5401-1

  • Back-lit keys for nighttime operation
  • 2000 users (card or passcode)
  • Rugged waterproof design and vandal resistant
  • 9-24 VDC
  • Tamper alarm
  • Door call button
  • .......more details
MB-02202

Micanan Electric Motor Only 3/4HP 575V 3PH

  • Base mount motor fits: T TB APT J EJ H EHJ HHD SD GO MSW
STRUT-2-1/4-18'

Door Strut 2-1/4" Hemmed 18ft Long

  • Reinforcement bar 2-1/4"
SOLID_SHAFT_8FT

Solid Shaft 1" Keyed 8 ft Galvanized

  • actual length is approx. 8'-1"
G65_18300

LiftMaster Thermostat Control Heater Fin Type for 115V & 575V Gate Operators

  • Heater used in BG type gate operators
SPREADER002

Chain Tensioner for 1" / 1-1/4"

  • Chain spreader for installation with 1" operator shaft and 1-1/4" door shaft
  • Designed to keep tension on the chain when used with a wall mount commercial operator. It helps avoid premature wear on the door shaft bearing and commercial operator output shaft bearing
1005-1-3/4-12

Aluminum Bottom Retainer U-Shaped

  • For door thickness 1-3/4"
27096A

Genie Drive Gear *** To Extent of Inventory

  • Gear for Genie Chain Glide PMX Series and PCG Series
  • 3-1/2 inch diameter nylon gear with square center hole
  • Square center hole is 7/16"
BK150/PR

Residential Bottom Bracket BB-100 sold as a pair

  • For use with 2" rollers
  • Works on 1-3/8" 1-1/2" 1-3/4" and 2" doors
  • 13 gauge residential bottom bracket that secures to the bottom of the door allowing the cable to be attached to the door for lifting
  • Same as part number 263
Q024

LiftMaster Limit Switch Assembly for SL3000 (K75-50097) *** To Extent of Inventory

  • Same as part number K75-50097
1013-1-1/4-16'

Rigid Vinyl Bottom Retainer L-Shaped 16' Long

  • For door thickness: 1-1/4"
MDKP

Linear MegaCode Exterior Wireless Keypad 318 MHz

  • MDKP can transmit a unique signal for each 1-6 digit PIN code entered.
  • It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions.
  • Access codes are programmed into the access controller or receiver the maximum number of codes possible depends on the receiver model used.
  • Features Include:
  • Internal antenna
  • 1-6 digit PIN for each user
  • .......more details
15-50B18QGH

Sprocket 18 Teeth 1-1/4" Bore 1/4" Keyway

41D1739-1

LiftMaster Motor & Travel Module (041-0236-000)

  • For model: 8550
  • Also known as: 41D8006-1 41D1739-1 41D1624-1 041D1624-1 41-0236-000
50-105

LiftMaster Black Coil Cord 4-Wire 18-ga 20 ft. Extended Curly Cord

CABLE_1/8SS-500

Cable 1/8" 7x19 500' Stainless Steel

TUBE_SHAFT_18FT

Hollow Shaft 1" x 18'-10" Galvanized 14 gauge

34299R

Genie Deluxe Wall Console Series II ** Discontinued Replaced by 39165R

  • Deluxe Wall Console for Genie Intellicode Series II only
  • 3 function console: operates door opener controls lights and security lock out switch
  • Compatible with Code Dodger
  • Same as previous part number: GPWC-2WLB
.234-258-L

Cut-to-Length Torsion Spring .234 x 2-5/8" Left Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Blue/White

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.218-258-L

Cut-to-Length Torsion Spring .218 x 2-5/8" Left Hand Wound Yellow/Orange

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.225-258-L

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.262-2-L

Cut-to-Length Torsion Spring .262 x 2" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
.250-2-R

Cut-to-Length Torsion Spring .250 x 2" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-200-INSTALLED
41A7562

LiftMaster Light Lens for 8360 8550 8355

  • Replacement light lens
.262-134-L

Cut-to-Length Torsion Spring .262 x 1-3/4" Left Hand Wound Red/Yellow

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.250-134-R

Cut-to-Length Torsion Spring .250 x 1-3/4" Right Hand Wound Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
.225-134-R

Cut-to-Length Torsion Spring .225 x 1-3/4" Right Hand Wound Orange/Green

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-134-INSTALLED
MX00034-110V

Micanan Brake Assembly for PRO-HHD with 120V Solenoid (MX00206-110)

  • Complete brake assembly including 120V solenoid - solenoid cover sold separately part #MM00011
107999.0001.S

Genie Motor Pulley for Overhead JST

21-3260-1

LiftMaster Transformer 50/60Hz 60va 120/208/240/480V

  • 120/208/240/480V PRIMARY 24V SECONDARY
MV00077

Interlock Switch for Sectional Doors

  • Mounts on the door track to prevent the use of the operator when the door is locked
41A5021-9G-315

LiftMaster Circuit Board Assembly

  • Board: Security+ 315 MHz
  • Aeesmbly includes: circuit board and end panel
  • Also includes 1 Multi-Function wall ctrl panel - 2 wire
  • For ATS2113X model
  • For older ATS operators use replacement board 41A5021-1ATS
CR2450

Maxcell/Renata 3V Lithium Button Cell

CR2032

Maxcell/Renata 3V Lithium Button Cell

ME123-YELLOW-U

Miller Edge Yellow Universal Outlet 2-Wire 2" wide x 1-1/2" high Sold by the Foot

  • Electromechanical slide in edge for sectional doors and sliding gates.
  • Touch sensitive singaling allows for immediate stopping and reversing of motion
  • Temperature range: -30F to 155F
  • Lead wire: 22 gauge universal
  • Sensitivity: nominal 6-8 PSI
  • 2 wire NO configuration
  • .......more details
312HMC

LiftMaster Universal Coaxial Receiver Sec+ 315 MHz

  • External 8" coaxial antenna included
  • Security+ rolling code technology and/or Dip switch compatibility
  • 12 VDC or 18-35 VAC/DC jumper selectable
  • Momentary or constant contact selectable
  • For replacement antenna use 41C3196
  • Accepts up to 31 remote control codes on Normal Security setting
  • .......more details
.250_1-3/4"-LH

Torsion Spring .250 x 1-3/4" x 12ft LH Green

  • Wire size: .250
  • Inside diameter: 1-3/4"
  • Length: 12 ft
374LMC*

LiftMaster 4-btn Sec+ Transmitter 315 MHz - DISC

  • Compatible with wireless keypad model number 377LMC
  • Compatible with Liftmaster garage door opener model numbers 3595 3585 3575 3500 3280 3265 3220 3255 3245 3110 1356 1355 1346 1345 ATS2113X ATS2113X-CX HCT501130 LGO50113O LGO50113L LGO50113R LGO50113XR
  • This transmitter is replaced by 894LT
LSBLK

Loop Sealant Cartridge Black 29oz

  • Also available in grey (LSGRY)
  • Can be installed in sub-zero temperatures as long as the surface is clean and dry
  • Loop sealant gun sold separatley # LSGUN
71-B120

LiftMaster Interior Mount Solenoid Brake 115V

41C4470

LiftMaster Gear & Sprocket Assembly for ATS211

  • Complete Gear and sprocket assembly for ATS211 ATS211R built from 1993 - 2003
4A1344

LiftMaster Light Socket Plastic (41C279)

24-24-6

Small Relay 24VAC 11-Pin 3 PDT

T-931-M

FL-Allstar 1-btn Mini Transmitter 109391-311 MHz

  • This single channel miniature transmitter controls one door.
  • It has a nine switches encoder with three positions: + 0 and -.
  • Manufacturer's model number: 9931MT (190-109301)
  • Dimensions: 1 3/8'' x 2 3/4'' x 1/2''
CP-SW-TD6A

Lynx Switch Light Delay

  • For the old Lynx 455 operators
CAM011

Manaras Limit Cam

  • Limit cam for Mountshaft018A 018B
  • 2 cam's required per shaft
144C56

LiftMaster Idler - Cable Pulley for chain drive

  • For square rail assemblies
  • Same as 144C0056
.363_6"-RH

Torsion Spring .363 x 6" x 12ft RH Green/White

  • Wire size: .363
  • Inside diameter: 6"
  • Length: 12 ft
.468_5-1/4"-RH

Torsion Spring .468 x 5-1/4" x 12ft RH Blue/Orange. **NLA

  • Wire size: .468
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.406_5-1/4"-RH

Torsion Spring .406 x 5-1/4" x 12ft RH Blue/Yellow

  • Wire size: .406
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.331_5-1/4"-RH

Torsion Spring .331 x 5-1/4" x 12ft RH Red/White

  • Wire size: .331
  • Inside diameter: 5-1/4"
  • Length: 12 ft
.393_3-3/4"-RH

Torsion Spring .393 x 3-3/4" x 12ft RH Orange

  • Wire size: .393
  • Inside diameter: 3-3/4"
  • Length: 12 ft