Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Misc Garage Door Dock & Gate
22-240

Brake Solenoid 230-240V

  • Used on all brands of commercial door and gate operators
  • 2 wire connection
DC1000-125

Dyna-Hoist DC Series Direct Drive Opener 1 HP 110/240V 1ph ** Price by Quote Only

  • The direct drive operator consists of a DC electric motor directly coupled to a hollow shaft (30:1 reduction) worm gear reducer designed to install over keyed door shaft.
  • Continuous duty 1 HP 90 V DC 1750 rpm motor suitable for 110 to 240 V 1 PH and 60 Hz power supply.
  • Comes with integral absolute encoder to control the door travel
  • 24 V 5 amps back-up battery pack and 3/8” ratchet socket to accept and crank for manually operating the door in case of power failure
  • Programmable wall mountable UL325 compliant NEMA 4X control panel with LCD display and OPEN-CLOSE-STOP buttons on cover
  • Nema 4 photocell
    • .......more details
Pulse Series Installation ManualsDC Series Brochure
ANGLE-13G

Perforated Angle 1-1/4" x 1-1/4" x 10 ft 13 g Orange

  • 10 pieces of 10ft per bundle.
H14G04

Hinge #4 x 14 gauge

  • Bright zinc plated 14-gauge steel hinge
  • For use with 7/16" diameter stem rollers
  • Full body hinge 2-3/4" wide
  • #4 position
  • Use between sections 4 and 5
  • Same as part number 244
    • .......more details
GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
GD-STEND-24D-2

End Cap Steel 16G 24" Double 2" Thickness

  • Galvanized Steel 16-ga (1.42mm) thick.
.207-258-R

Cut-to-Length Torsion Spring .207 x 2-5/8" Right Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
.207-258-L

Cut-to-Length Torsion Spring .207 x 2-5/8" Left Hand Wound Brown

  • Priced per inch - cones sold seperately
  • For factory installed cones use part no. C-258-INSTALLED
CB3160500-KOR

Cable 3/16" 7x19 500' Galvanized Supreme

  • Galvanized cable 3/16" 7x19 500ft spool.
  • Cable break strength: 4200 lbs
  • A higher quality cable compared to the Chinese cable
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
CB5320500-KOR

Cable 5/32" 7x19 500' Galvanized Supreme

  • Galvanized cable 5/32" 7x19 500ft spool.
  • Cable break strength: 2800 lbs
  • A higher quality cable compared to the Chinese cable.
  • Meets endurance test requirements of over 35000 work cycles
  • Lubricated for flexability and longer service life
Comparison charts
EP2982-NL

Exhaust Port 4" non latching short barrel

  • 4" inside diameter 1/4" sleeve
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
FHKS3D-86

Stainless Steel Face Hardware Kit 3" Track Double End Stile 6 Panel 8 Sections

  • Kit includes: Top & bottom fixtures center hinges end hinges and self drilling hinge screws
  • All hardware is heavy-duty 12 ga material
  • Kits are configured for up to 2" door thickness. Other door thickness are available by request.
COAX-5-RG6

Coax Cable Assembly 5 ft

  • Assembly includes union
SNS1P6

Belden RG6 Co-axial "F" Male connector Snap-N-Seal

RENO-BX4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector

  • The Model BX is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
  • Eight detection sensitivity levels are selectable by means of a front panel mounted rotary switch external dip switches
  • Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep
Installation Manual Sell Sheet
42GRR-9001

Allen Bradley Series 9000 Photoelectric Sensor Thru-Beam Receiver Unit

  • nput: 20-40VAC 10-55VDC 4VA
WPS-1H-110V

Wall Pull Switch with 110V Heater

  • Wall Pull Switch Nema 4 Momentary Contact
  • Made of Aluminum DieCast
  • Equipped with a bronze sleeve bearing which provides smooth pull down actuation.
  • Cast Aluminum rotating cam allows for 360 degrees rotation and pivots downward 30 degrees off vertical from any direction.
  • Designed for industrial doors and fast moving lift truck operators.
  • Two 3/8" plugged holes on top for ceiling mount ( remove plugs for ceiling mount)
    • .......more details
LSGRY

Loop Sealant Cartridge Grey 29oz

  • Also available in black (LSBLK)
  • Can be installed in sub-zero temperatures as long as the surface is clean and dry
  • Loop sealant gun sold separatley # LSGUN
R6000

Shaft Collar 1" with 2 Set Screws

  • Set Screws: 5/16 x 18
19-40HL

Half Link #40

  • Half link for #40 chain
  • ANSI Standard Carbon Steel