Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search 1
2510-527

Linear Motor Drive Inverter Assy 2HP 230V 3P

  • For model VS-GSLG-723
REDUCER030

Manaras Reducer CC63-40D Frame 56

328-729

Lip Shock Absorber Dock Leveler

  • Used to control descent of dock leveler lip
  • 1/2" holes are 10.4" center compressed 16.25" when extended
STRUT-2-1/4-16'

Door Strut 2-1/4" Hemmed 16ft Long

  • Reinforcement bar 2-1/4"
112561

Allstar MVP-RE 24V 8 Wire Receiver 288 MHz *** NLA

  • Three channels – three relay outputs
  • 8-wire operator connection
  • Wire whip antenna with “F” connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
  • Codes: 19683
    • .......more details
10-10191-GR

LiftMaster Brake Disc

  • For various Liftmaster commercial slide door operators
  • Also known as: 10-10191-GR 10-10191-GR 1010191 G105209 10-10191 105209
41A7278

LiftMaster Sprocket Kit 12-Tooth

  • Includes sprocket and screws
VMD202-R

EMX Remote Tuning and Adjustment Control Device

  • If you wish to “tune” the sensitivity the accessory VMD202-R will need to be plugged temporarily into the connector.
  • The VMD202-R may then be removed or left in place as desired.
41D3058

LiftMaster Electric Motor and Bracket Kit

  • Complete kit includes: Motor and bracket assembly sprocket RPM sensor grease and bearings
  • Also known as: 41D3058 41A2821 41A2820 41A3058
VMD202-50

EMX Vehicle Motion Detector Probe with 50ft Lead Wire

  • The VMD202 Vehicle Motion Detector is the most advanced single-piece vehicle motion sensor on the market today.
  • The probe and its electronics are housed in a slim design that is buried next to a driveway.
  • The VMD202-R Sensitivity Remote Control (sold separately) makes installation and fine tuning simple
  • Probe assembly and wire are water tight and direct burial compatible
  • Harness is pre-wired onto lead wire for easy installation
  • Settings are placed in a non-volatile memory in case of power failure
    • .......more details
T-831

FL-Allstar Stationary TransmitterO/C/S 3-Btn 1-Door 311 MHz 107483

  • Open/Close/Stop stationary remote for 1 door.
  • Designed for commercial automatic door and gate operator applications.
  • This transmitter can operate a single receiver connected to one operator
  • Compatible with 3-channel Allstar and MVP receivers
  • Easy access to battery and coding switch
  • Power: 9-volt battery
    • .......more details
ESM500

Erone 1200lbs Exterior Maglock Surface Mount Stainless

  • Exterior applications & High-traffic areas
  • Power requirements: 12/24VDC
  • Current Draw: 500mA @ 12VDC 250mA @ 24VDC
  • Monitoring sensor
  • Visual feedback (red & green)
  • Optional L/Z bracket sold separately: LZE500
    • .......more details
Installation manual
SPRING001

Manaras Cam Guide Plate Spring

RBH505L5-RH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Right Hand ***NLA

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
RBH505L5-LH

LiftMaster 1/2 HP 575 VAC 3 PH Commercial Hoist Operator Logic 5 Left Hand ***NLA

  • H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
  • H operators are attached to the door jackshaft to indirectly drive the door.
  • With the addition of the 828LM MyQ technology enables the user to monitor and control their operator and light with their smartphone tablet or computer.
  • Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
  • Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.
    • .......more details
NICE-OVIEW

NICE Oview Display Programmer

  • Type: control programming and diagnostics unit for devices equipped with BusT4 connector „
  • Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands modification or parameters and monitoring of diagnostic data
  • Maximum number of hourly commands: 64 „
  • Event log: storage capacity of 400 events
  • Operating temperature: from –20°C to +55°C •„ Dimensions (mm): 107 x 61 x h 20 (with wall-mounting support: 125 x 70 x h 32)
    • .......more details
ACP00942

Linear Control Board for Telephone Entry System AE-100

  • Board only for AE-100 telephone entry system
7M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M7BAR Barrier Gate

  • Bar assembly comes with:
  • (1)XBA15 -- 3M BAR
  • (1)XBA14 -- 4M BAR
  • (1)XBA9 -- EXPANSION JOINT FOR CONNECTING BARS
  • (2)XBA13 -- RUBBER IMPACT PROTECTION STRIP
  • (2) WA10 -- RED ADHESIVE REFLECTIVE STRIPS
    • .......more details
CP-BRK-CAM-MCJ

Lynx Retaining Plate & Hardware for MCJH

41A7618

LiftMaster End Panel with Battery Cover and Light Socket 8550W

K10-10166

LiftMaster Clutch Plate

  • Also known as: 1010166 10-10166 142A122 AB112-00230 1090371 142C131 10-9037-1 G1090371 0890371 G1010166 112-00230
2807.162.180

Whiting .162 x 2-3/16 x 18" Curbside with Cones

30005

Doorlec Brake Solenoid 208V with wire leads

BTN-8L5-RD

Devanco red replacement button for 8L5-OCS

  • red replacement button for 8L5-OCS
XBA13

NICE Rubber Impact Red Protection Strip 9M/Pkg

WA10

NICE Red Adhesive Reflector Strips 24pcs/Pkg

30001

Doorlec Brake Solenoid 575V with wire leads

FLO1

NICE 1-btn Dip Switch Remote 433.92 MHz *** Discontinued

  • Nice 1 Button 433.92MHz radio-control with programmable code - 1024 combinations.
  • Contains 10 DIP switches inside for coding.
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
PTRR5-C

Telco Light Curtain Fastening Clips 3 pcs/Bag

JA383

FAAC Sprint 383 Board 115V

2376.192.29.910

Whiting Torsion assembly .192 wire size 29" spring length 91" shaft

  • This is a full balancer assembly
CGH203L5-RH

LiftMaster Gearhead with Brake & Carwash Mod. 2 HP 208/230/460V 3P L5 Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
DHJ501L5-RH

LiftMaster Ind. Duty Hoist/Jackshaft Op. 1/2 HP 115/230 VAC Logic 5 Right Hand***Discontinued

  • Industrial-Duty Hoist/Jackshaft Operator with Internal Door Lock Sensor
  • Optimal for shopping mall applications with heavier rolling doors and grilles.
  • Provides a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Includes a door lock sensor to prevent damage to the door and operator caused by attempts to automatically open a locked door.
  • Industrial Ball Bearings on 1" Output Shaft
  • Second Floor-Level Disconnect for Manual Lifting in an Emergency
    • .......more details
BCSI-PM10

Pivin Drapeau Clutch Plate for BCSI Gate Operator ** Price by Quote Only

  • Friction Plate
SF175-S

Spring Fitting 1-3/4" Stationary Side Only 1" shaft

MK01428

Micanan Digital Countdown Timer

  • DC-Digital
LV-24-TL-RG

Narrow Lights for Loading Docks Red / Green LED 12-24VAC/DC 24-3/8" long Sold Individually

  • LED lights offer long-lasting reliable high-visibility in all weather conditions including direct sunlight with low power consumption.
  • Robust housing resists impact and corrosion.
  • Slim discrete design ensures little risk of damage due to accidental impact.
  • Wide input voltage range of 12-24Vac/dc (control box available for alternate voltages).
  • Boards coated in water-resistant polymer for optimal protection from water and humidity.
  • 24 LEDs per guide light (12 Red 12 Green)
    • .......more details
50442

Doorlec Mushroom Push-Button Red for 1-Door

  • Capable of opening one door
  • NEMA 4 Enclosure
  • non-lockable
50430-KEY

Doorlec PBS 2-Btn O/C and Key Switch On/Off Nema 4/12

  • Open / Close with On / Off Key Switch Nema 4/12
  • Green - Open Black - Close
GATE-SP-ORDER

Special Order Gate

  • Made to customers specific requirements
MT22-GRAY-LH

Miller Edge 2-Wire Pressure Sensitive Edge Sold per Foot Gray

  • Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty
WorksheetInstallation manualSell sheet
FLO1R-SA

NICE 1-btn Rolling Code Keychain Remote 433.92 MHz

  • Rolling code No internal dip switches programming with the reciever
  • Battery included: 12V (GP23A)
  • Dimensions: 72 x 15 x 40 mm
USVD-BD

EMX Board Only for Ultra Sonic Vehicle Detector

  • Replacement board only for USVD-4X
HW0427-LH

SteelCraft Commercial Bottom Bracket Left Hand Only

  • Left Hand bracket only
  • Can be used for both 2" and 3" tracks
  • To be used on door tracks that are installed wide enough to accomodate the side cable pulley
  • Door hardware must start with a #1 hinge on the bottom panel for both 2" and 3" hardware
  • Adjustable cable can level door from the ground
  • Heavy gauge steel construction
    • .......more details
50200

Doorlec Front Idler for ETB-3 with 410B9 -5/8" Sprocket

GATE_RN3.5

Nylon Gate Roller for Cantilever Gate

3055

End Stile Keyed L-Handle With Locking Cylinder and 7-1/2" Latch Mechanism

MK00643-MOD

Micanan Auxiliary Apt. Circuit Board for Red/Green Light Feature 115V Models Installed on Op.

  • Available option for electonic circuit board (E) models only
1004-2-12'

Aluminum Bottom Retainer 2" U-Shape with Reinforcement 12 ft***Actual Length 12'2"***

  • For door thickness 2"
MH00027

Micanan Collar 1/2" ID

SS-STRUT-10

Strut Stainless Steel 2-1/2" x 10ft 16-Ga

19-4071

LiftMaster Chain #40x71 No Master Link

  • #40 x 71 pitch no master link
  • Same as G194071
  • Compatible with LiftMaster Model SL595GL Slide Gate Operators.
DXT-25

Linear 5-Btn 8-Channel Handheld Transmitter 315 MHz *** Available to extent of inventory

  • A battery powered portable transmitter designed for use with Linear’s DX Format receivers.
  • Each transmitter can be used in a limitless number of wireless remote control applications.
  • Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver
  • The digital DX code format features over a million possible codes.
  • The DX transmitters are precoded at the factory to unique codes so no field coding is required
  • Powered by two 3-Volt #2032 lithium batteries included
    • .......more details
MICANAN-H/CHAIN

Micanan Charge for Hand Chain on Doors Over 16'

  • Up-charge only
71-909210MD

LiftMaster Field Mod. Dual Aux. Limit Switch

MA011

LiftMaster Magnet

  • Mega Arm Steel Magnet Assembly for Cam Arm
MA012

LiftMaster Cam Arm with Magnet

  • Cam Arm for Liftmaster Mega Arm gate op.
K76-34697

LiftMaster APS Encoder 24V

  • For use with various LiftMaster® Commercial Slide and Overhead Gate Operators
41AB150-2

LiftMaster Receiver Logic Board ** NLA

  • Also known as: 41AB150-2 41AB150
  • Receiver Logic Board 315MHz
BEA-10-1311

BEA Adaptor Plate Kit for Widescan

1004-134-14'

Aluminum Bottom Retainer 1 3/4" U-Shape with Reinforcement 14 ft**Actual Length 14'2"***

  • For door thickness 1-3/4"
VPL-12

Autogate 12V Motor

41A5585

LiftMaster Drive Gear & Sprocket Kit 3/4 HP

  • Kit includes: Worm gear Helical gear Retainers Washers Pins Bearing plate Grease Detailed instructions
  • Compatible with Liftmaster 2575 3275 3575 and 3575S models
EP2982-NL

Exhaust Port 4" non latching short barrel *** To Extent of Inventory

  • 4" inside diameter 1/4" sleeve
  • Includes fasteners & gaskets.
  • Polished aluminum finish.
41D0277-1

LiftMaster Transformer WiFi Battery Backup

  • For Wi-Fi Battery backup garage door openers; manufactured after 2011
  • Same as #204D0277-1
41D8859

LiftMaster Cover 8550WL WLED

  • Burgundy Replacement Cover.
  • This one piece cover is compatible with various LiftMaster® Lock Capable Garage Door Openers Powered by myQ®; manufactured after 2017
41D9202

LiftMaster End Panel Driver Board ** Discontinued

  • 041D9202 is a Front End Panel with LED Light Connector/Driver Board Replacement Kit.
  • For use with LiftMaster® and Chamberlain® Residential Garage Door Openers; manufactured after 2018.
  • Compatible with the WLED model
K75-10406

LiftMaster Drive Chain Connector Link Kit APT

  • Also known as: 30515363 305105363
K1D8389-1CCU

LiftMaster Upgrade Kit with Eyes DC Pad Mount for UL325

  • Upgrade Kit for models CSW24V CSW24VH CSW24VDC CSL24V CSL24VH and CSL24VDC UL325 Approved Gate Operators; manufactured 2012 to 2015.
  • Complete kit includes: Main Control Board Expansion Board LiftMaster® Monitored Retro-Reflective Photoelectric Sensor Kit UL Upgrade label and Adapter Harness (used with CSW24V CSL24V and CSL24VH only)
2705.148_180

Whiting Curbside Torsion Spring for Cube Truck Roll-Up Doors 18" Long

  • Most common torsion spring for cube trucks
  • Specs: .148 x 2-3/16" x 18" Long
  • For Roadside order part # 2704.148*180
SCLUTCHSHAFTN4

Micanan Complete Clutch Shaft Assy for PRO-HW

MD-00252

Micanan Connecting Link #50

CGH751L5-RH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Right Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Damp Environment Modification
K75-50932

LiftMaster Crank Housing Kit - Hand Crank Not Incl. **DISCONTINUED

  • SL3000 new style hand crank pocket to store hand crank (crank sold separately)
Q025

LiftMaster Motor Pulley 2-1/2" OD 1/2" Bore (K17-50098)

  • Replacement motor pulley of motor output shaft for Liftmaster Elite models SL3000UL and CSW2000UL
PRO-GH-10081U-R

Micanan 1 HP 208V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand

  • Includes 3-btn O/C/S control station Nema 1
  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
    • .......more details
1005-1-1/2-14'

Aluminum Bottom Retainer U-Shaped 14' Long

  • For door thickness 1-1/2"
SL585101UL

LiftMaster Industrial Slide Gate Op. 1 HP 115/230/208V 1 Ph Heater NOT Incl. ***NLA

  • SL585UL features a heavy- duty industrial lockable metal cover.
  • Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.
  • Manual Disconnect when unlocked allows gate to be operated manually.
  • Quick Close and Anti-tailgate quickly secure property preventing unauthorized access.
  • Lockout/ tag-out Feature prevents power from being switched on when servicing operator and safeguards workers from high-voltage power.
  • Automatic Solenoid Brake prevents the gate from being back driven.
    • .......more details
Installation ManualManuel installationBrochureSell sheet
CGH751L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Left Hand

  • Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
  • GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
  • Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
  • MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
  • Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
  • Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.
    • .......more details
Damp Environment Modification
PPV3M

LiftMaster Passport MAX 3-Button Visor Remote

  • Provides total control with one remote for gated communities and commercial properties.
  • Compatible with the PPWR Receiver for gate access control all 315MHz Security+ LiftMaster and Elite Series Gate Openers and all LiftMaster Garage Door Openers manufactured since January 1995
  • 2x the range of standard remote controls
  • Narrow-band transmission on 3 simultaneous frequencies (310 MHz 315 MHz 390 MHz)
K75-39337

LiftMaster Trolley Nut Kit LA500

  • The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
  • The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
  • The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
  • LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm
Replacement instructionsInstructions de remplacement
MODKIT012B

Manaras Non-Reset Cycle Counter Kit - Boards

  • Field install kit
  • When activated counts one complete cycle of the door
  • Hardwired
CP-PW-NM-CDJH

Lynx Pocket Wheel for CDJH Hex Bore OD 6.35"

  • Same as #2-30-1
MLC-K36

Miller Edge Light Curtain Monitored 3ft Pulsed

  • Light curtain made up of a series of thru-beam photo eyes designed to provide a dense barrier of protection for motorized or high speed doors.
  • Ideal for environments that require expanded protection for protruding parts that may not be detected by standard single-beam photo eyes mounted 6" above the floor.
  • Ability to span up to 32' wide
  • Universal mounting brackets included
  • IP67 waterproof housing
  • Operating temperature: -40F to 140F
    • .......more details
Installation manualSell sheet
LIMIT017

Manaras Micro Limit Switch SPDT

  • CAP001 sold separately
C184-24B

Coil Cord 4 Wire 18-Gauge Black Extends 24ft

2500-2393

Linear Apex I Module

  • Older model prior to Jan 2016
10PBJL

Jamb Push Plate SS with Handicap Logo Only

  • 1⁄16 inch thick stainless steel for maximum durability
  • Concealed fasteners to minimize vandalism
  • Compatible with both surface and flush mount boxes
  • Faceplate Material 16 gauge 304 2B Stainless Steel
  • Backplate Material 1⁄8 inch thick Aluminum
  • Mounting Screws Stainless Steel 6-32 × 1 in & 8-32 × 1 in Allen Head Size: 5⁄64
    • .......more details
TRMC38E

Telco Light Curtain Bracket 4/pkg

PRO-GHC-10053U-R

Micanan 1 HP 575V 3P Gearhead Operator with N1 Eyes Monitored ECB Right Hand

  • External radio control terminal strip
  • Heavy duty worm gear reduction in oil bath gearbox
  • Solenoid brake standard
  • #50 roller chain and sprockets on final drive
  • Emergency chain hoist with electrical cut-out switch for manual operation
  • Full function Smart 10.0 logic board and on-board receiver
    • .......more details
33102

Doorlec Overload 1.20 to 2.00 Amps

MP00129

Micanan Up-Charge Track and #41 Chain for 12' h Door PRO-APTC

  • For 1/2 HP Micanan trolley operator PRO-APTC
MH00096

Micanan Flange Bearing 3/8" ID

  • Replaces MH00019
203928

Decorative Locking L-Handle with 2 Keys

  • Black powder coated zinc with crinkle finish
  • 90 degree handle rotation
  • Blind mount installation 3.62" stem
  • Includes 2 keys and shaft clip
V7001-BLACK

Replacement Vinyl Only for 7001-Black 200ft Roll

  • Sold in 200 ft rolls only
3500

Whiting Beverage Align Roller 1" Screw Type

  • A Whiting original
SPRAY-431

Aluminum Touch Up Spray Paint 350g Bright White / Blanc Pur #431

  • 350g
  • Replaces Gentek #801
210109

Skylink Pulley Assembly - Chain

CSW200501U

LiftMaster Commercial High-Traffic Swing Gate Operator 1/2 HP 120-240VAC

  • First choice for heavy-traffic applications such as large gated communities residential developments commercial complexes and private estates.
  • Unlike other systems the CSW gate operators are designed with a "non-scissor action" swing arm to greatly reduce the risk of injury
  • Bi-Part Delay Monitors and adjusts speed and position of each wing to ensure primary gate closes last.
  • Synchronized Close Simultaneously closes gates.
  • Pre-Motion Warning Alarm Activates onboard alarm three seconds prior to gate motion.
  • External Alarm Reset Button Instantly resets the built-in safety alarm siren.
    • .......more details
2X6PO50

Devanco Loop 2 x 6' pave-over 50' lead-in

  • Ideal for use on with gravel driveways or sufaces that are to be asphalted
  • Features a twisted lead-in to reduce the chances of interference and false detections.
  • Direct burial loops should be buried approximately 6" deep