Devanco Canada - Get The Right Garage Door Opener‎ and Parts

K10-10166

LiftMaster Clutch Plate

Also known as: 1010166 10-10166 142A122 AB112-00230 1090371 142C131 10-9037-1 G1090371 0890371 G1010166 112-00230

P-75

End Plug for 3/4" ID Rubber Hose

Sold per plug

M15A

Safety Inertia Brake 2" Bore 13727 Torque PCM15AP

Provides a bearing to support the shaft and prevent the fall of a door if sudden acceleration occurs.
Ideal for commercial and industrial use; specifically with rolling shutters and balanced and well maintained rolling doors.
Fully resettable and reusable after lockout ocurrs.
Commonly paired with commercial safety bottom brackets in sectional door applications.
Fits 2" shaft
Note: Sectional torsion door systems must be well maintained to ensure desired inertia brake activation.

.......more details

Manual Technical data Sell sheet

XBA13

NICE Rubber Impact Red Protection Strip 9M/Pkg

WPS-1H-110V

Wall Pull Switch with 110V Heater

Wall Pull Switch Nema 4 Momentary Contact
Made of Aluminum DieCast
Equipped with a bronze sleeve bearing which provides smooth pull down actuation.
Cast Aluminum rotating cam allows for 360 degrees rotation and pivots downward 30 degrees off vertical from any direction.
Designed for industrial doors and fast moving lift truck operators.
Two 3/8" plugged holes on top for ceiling mount ( remove plugs for ceiling mount)

.......more details

UTIL025

Utility Limit Switch Telemecanique

SF175-W

Spring Fitting 1-3/4" Winding Side Only 1" shaft

DW-3S-300

Fraba Air Wave Switch Larger Housing with Copper End NOC

Fraba DW3S-300 air switch 10008797-2
Normally Open Contact (NOC)
Screw Type Connector
Dimensions: 158x60x39 mm (6.22" x 2.36" x 1.54 '')
Housing: ABS Switch: PA6V0 Nema4
Normally Closed Contact achieved by adjusting the sensitivity screw

.......more details

Operating Instructions

MT22-MON-GRY-RH

Miller Edge 4-Wire Monitored Pressure Sensitive Edge Gray Sold per Foot

��Electromechanical small profile edge for rolling steel foor applicaton. •Touch sensitive signaling allows for immediate stopping or reversing of motion. •The MT22 is completely flexible and will contour to curved surfaces. The MT22 also acts as weatherstrip. •Lead wire: 22 gauge universal •Sensitivity: nominal 6-8 PSI •2 wire NO configuration •Horizontal mount •ANSI/UL325 recognized component •One year warranty

Worksheet Installation manual Sell sheet

USVD-BD

EMX Board Only for Ultra Sonic Vehicle Detector

Replacement board only for USVD-4X

GATE_RN3.5

Nylon Gate Roller for Cantilever Gate

CP-PU-DRV-58-8

Lynx Drive Pulley 5/8" x 8" 4L MR TC3 Open/Spoke Style for Trolley Ops

6X32SC50

Devanco Loop 6' x 32' saw-cut 50' lead-in

Manufactured to the highest quality standards to ensure accurate detection our Pre-formed loops come with a 50 foot twisted lead-in ware and available lead-in lengths up to 500 feet.
Ideal for use on existing asphalt or concrete surfaces
Features a non spliced continuous wire throughout loop turns and lead-in.
requires the use of loop sealer when being installed to ensure long lasting trouble-free detection

729014

FAAC Manual Release Dial

BCSI-HV-100-53

Industrial Slide Gate Operator Variable Speed 1 HP 600V 3 Ph with Heater ** Price by Quote Only

Heavy-duty alminum cabinet Nema 3R
Programmable logic controller
Adjustable friction clutch
Thermostat controlled heater
Opening / Closing speed of 24" / sec
Nema 4 control panel

.......more details

Installation manual Sell sheet Brochure Installation overview Dessin de installation Diagnostics and troubleshooting Diagnostics et dépannage

K72-12789

LiftMaster Hand Chain Shaft Kit GH (1/2 - 2HP)

Complete with: Bevel Gear 3/4" ID Hand Chain Guice Hand Chain Shaft Bearing 3/4" ID Nyliner Bearing Compression Spring Chain Wheel Washers Roll Pins and E-Rings

MP00227

Micanan Track and #41 Waterproof Chain for 12' h Door

41AB150-2

LiftMaster Receiver Logic Board ** NLA

Also known as: 41AB150-2 41AB150
Receiver Logic Board 315MHz

CAP425

Capacitor 125VAC 425MFD

Motor Start Capacitor 125V 425 MFD

HSLG-121

Linear Commercial Slide Gate Operator 1 HP 230V 1 Ph - Heater not Included

Max duty cycle: Continuous
Integral APeX Controller
Double V-belt to chain reduction
#40 roller chain
Emergency manual disconnect handle
Powder coat finish

.......more details

PHOTO-070

Manaras Monitored Photoelectric Cells N1 Thru-Beam 45' Range

Monitored NEMA 1 enclosure through-beam type photocell
4-Wire
Indoor
Range: 45 ft

Manual

SCLUTCHSHAFTN4

Micanan Complete Clutch Shaft Assy for PRO-HW

Q237

LiftMaster Crank Input for SL3000 (K75-50242) ** Discontinued

SHAFT036

Manaras Limit Shaft 5/8"-18x12

7-2326

RW Pull Cord Kit

4-3/4" x 4-3/4" anchor for bracket and clip angle

CGH751L5-LH

LiftMaster Gearhead w/ Brake & Carwash Mod. 3/4HP 115/230V 1P L5 - Left Hand

Gearhead style commercial door operators employ lubricated gears for heavy industrial high cycle applications.
GH-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
Hoist wheel is easily moved to Right or Left hand side of unit eliminating the need to order right or left hand mounting.
MyQ Technology enables you to securely monitor and control your facility operator with your smartphone tablet or computer. Internet Gateway 828LM required.
Security +2.0 radio receiver safeguards your facility - with every click a new code is sent to the commercial door operator so the door opens only for you.
Timer-To-Close: Conveniently and confidently closes the commercial door automatically after a predetermined amount of time has elapsed for added security and peace of mind.

.......more details

MV-00049

Micanan AB Reflective Photocell GRU 115V with MK00480 bracket (60-2439)

Includes eye reflector and bracket

27020

Doorlec Electric Motor TEFC 1/3 HP 115/230V DC301

K75-39337

LiftMaster Trolley Nut Kit LA500

The travel nut on LA500DC and LA500DCS gate operators may break when excessive force is applied to the gate such as being struck from a vehicle.
The travel nut can be identified as the white plastic nut that attaches to the internal lead screw of the arm.
The symptom of this problem is that the trolley assembly slides back and forth along the guide slots without mechanical restraint.
LiftMaster has created Trolley Service Kit K75-39337 with all the necessary parts and provides instructions on how to replace a damaged travel nut within an LA500 arm

Replacement instructions Instructions de remplacement

GD-WAX

Devanco Canada Garage Door Wax 467g Aerosol

Ozone Friendly Door Wax with anti-wear and extreme pressure additives.
Silicone Free
Aerosol Wax that sprays on and buffs effortlessly to create hard shell finish. •Excellent wax for anything that needs reviving shines all painted surfaces.
16.5 oz Cans
Available for private label

Safety data sheet Fiche de données de sécurité

MOTOR258

Manaras Electric Motor TEFC 3/4HP 120/240V 1PH

PRO-APTC-5021-U

Micanan 1/2HP 230V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

PRO-APTC-5081-U

Micanan 1/2HP 208V 1P Apartment Trolley Op. Photo Eyes Monitored ECB

Low clearance design for APT applications (8.5")
Door speed: 7" per second
N-4 Micanan compatible monitored photocells included
Monitored board
Side access hinged cover for easy access to controls
Three button open-close-stop control station Nema-1

.......more details

Installation manual

210109

Skylink Pulley Assembly - Chain

2X6PO50

Devanco Loop 2 x 6' pave-over 50' lead-in

Ideal for use on with gravel driveways or sufaces that are to be asphalted
Features a twisted lead-in to reduce the chances of interference and false detections.
Direct burial loops should be buried approximately 6" deep

R5207

Pulley 4" Zinc Plated Steel

Bored for 3/8" diameter bolt
Maximum cable diameter: 1/4"
Hardened inner race

MD-00348

Sprocket 50B26 x 1" 1/4" KW 2SS

MK-00034

Micanan Overload Reset 1-Phase 5 Amps

LJ8950W

LiftMaster Light Duty Commercial Jackshaft Op. for Rolling Doors

Ideal for smaller/lighter commercial doors with light duty cycle requirements
MyQ Technology Built-In Wi-Fi Real-Time Alerts
Smooth Start/Stop
Optional Accesories 827LM MyQ Remote LED light 485LM Battery Back-up 841LM Automatic Door Lock 480LMB Alternate Mounting Kit and LC-36A Light Curtain
Powerful Add-Ons 811LM and KPW5/KPW250

2520-437-BT-YELLW

Linear Token Acceptor Yellow 12" x 10" Locked Outdoor Encloser

Available in Black White or Yellow
Stand not included

.363-6-L-C

Cut-to-Length Torsion Spring .362 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-600-INSTALLED

.363-334-R-C

Cut-to-Length Torsion Spring .362 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold separately
For factory installed cones use part no. C-375-INSTALLED

.343-6-L-C

Cut-to-Length Torsion Spring .343 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.343-258-R-C

Cut-to-Length Torsion Spring .343 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.331-6-L-C

Cut-to-Length Torsion Spring .331 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones and filler sold seperately
For factory installed cones use part no. C-600-INSTALLED
For spring filler use part no. SPRING-FILLER

.343-258-L-C

Cut-to-Length Torsion Spring .343 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.331-258-L-C

Cut-to-Length Torsion Spring .331 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.319-514-R-C

Cut-to-Length Torsion Spring .319 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

.319-334-R-C

Cut-to-Length Torsion Spring .319 x 3-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-375-Installed

.312-6-R-C

Cut-to-Length Torsion Spring .312 x 6" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.312-258-R-C

Cut-to-Length Torsion Spring .312 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.306-6-L-C

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-600-INSTALLED

.295-6-L-C

Cut-to-Length Torsion Spring .295 x 6" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

.295-514-R-C

Cut-to-Length Torsion Spring .295 x 5-1/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-514-INSTALLED

.295-514-L-C

Cut-to-Length Torsion Spring .295 x 5-1/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch
For factory installed cones priced seperately - use part no. C-514-INSTALLED

.273-134-R-C

Cut-to-Length Torsion Spring .273 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.262-134-R-C

Cut-to-Length Torsion Spring .262 x 1-3/4" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.250-258-R-C

Cut-to-Length Torsion Spring .250 x 2-5/8" Right Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

.243-134-L-C

Cut-to-Length Torsion Spring .243 x 1-3/4" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-134-INSTALLED

.225-258-L-C

Cut-to-Length Torsion Spring .225 x 2-5/8" Left Hand Wound Coated ** Price by Quote Only

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

MW-00232

Micanan In-Line Torque Clutch Assembly Modification

Clutch is mounted in between motor and reducer flange
Overall length of operator increases by 3.85"
For models PRO-GH / GHC 1/2hp 3/4hp 1 hp 1.5hp & 2 hp

PRO-GH-5021U-R

Micanan 1/2HP 230V 1P Gearhead Operator N1 Eyes Monitored ECB Right Hand (PRO GHE)

Includes 3-btn O/C/S control station Nema 1
External radio control terminal strip
Heavy duty worm gear reduction in oil bath gearbox
Solenoid brake standard
#50 roller chain and sprockets on final drive
Emergency chain hoist with electrical cut-out switch for manual operation

.......more details

Installation manual Specification sheet

PRO-HHD-10083U-R

Micanan 1 HP 208V 3P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

1 HP208V 3 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Specification Sheet

PRO-HHD-10081U-L

Micanan 1 HP 208V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1 HP208V 1 PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn o/s/c (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual Specification Sheet

DW-3S-200

Fraba Air Wave Switch Small Housing NOC

Fraba DW3S-200 air switch
Normally Open Contact (NOC)
Small Housing does not come with copper end
Screw Type Connector
Housing dimensions: 101x48.5x48 mm (3.97x1.91x1.89 '')
Housing: ABS Switch: PA6V0

.......more details

Operating Instructions

PRO-HHD-5021U-L

Micanan 1/2HP 230V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Left Hand

1/2 HP230V 1PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN)Specification Sheet

LA412XL20W

LiftMaster Single Arm Solar Package for LA412DC XL Gate Operator UL325 ***Includes (1x) K94-37236 Solar Harness (1x) SP20W12V Solar Panel (1x) LMRRUL Photo Eye (1x) A12330SGLPK Battery (12V) (1x) LA412DC Actuator Arm (1x) XLSOLARCONTUL Control Box

Access your property like never before. With MyQ® Technology you can monitor and control your gate from anywhere and get in quickly and securely with the built-in interference eliminating Security+ 2.0® radio.
Heavy-Duty Cast Aluminum Housing DC Motor powerful enough to perform in the most demanding applications.
Soft start/stop operation extends operator and hardware life for heavy-duty gate use.
Gate Size rated for gates up to 16 ft. in length or weighing up to 850 lbs.
Includes: Single arm control box solar harness kit solar panel kit 12V 20W LMRRU photoeye and battery 12V 33 Ah.
Item codes: XLSOLARCONTUL SP20W12V LMRRUL LA412DC K94-37236 A12330SGLPK

.......more details

PRO-H-7523-U-LH

Micanan 3/4HP 230V 3P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-7583-U-RH

Micanan 3/4HP 208V 3P Hoist Operator N1 Eyes Monitored ECB Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-7521-U-LH

Micanan 3/4HP 230V 1P Hoist Operator N1 Eyes Monitored ECB Left Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Nema 1 photoeyes included
Solenoid brake OPTIONAL

PRO-H-5053-E-RH

Micanan 1/2HP 575V 3P Hoist Operator NM ECB No Eyes Right Hand

Continuous duty belt drive jackshaft operator with emergency chain hoist
Full function Smart 10.0 Logic control board featuring on-board receiver with antenna
Solenoid brake OPTIONAL
Non-monitored board NO photoeyes

MDT-1B

Linear 1-Channel Visor Transmitter MegaCode Block Coded 318 MHz

Compatible with all Linear access receivers and controllers
Superior transmission range
Unique ”Extra” top button
High visibility operate LED
Visor clip included
Sold in lots of 10

.......more details

Programming instructions

MK-00160

Micanan 12-Pole Terminal Strip

MK-01179

Micanan Telemecanique Contactor Kit 24V **use code MK-00493

LC2K1210B7 mini contactor

MM-00327

Micanan L-Bracket Right Angle Front of Coil For Rolling Steel Doors

MK-00477

Micanan Timer Plug-In Type 0-10min 120V

MV-00015

Micanan Key Switch O/C w/Stop Btn Tamper Proof Nema 4 Surface Mount

MV-00237

Micanan Key Switch O/C/S Btn Tamper Proof w/Best Core Cylinder Nema 4 Surface Mount

MV-00304

Micanan Wireless Key Switch

MP00226

Micanan Track and #41 Waterproof Chain for 10' h Door

For 3/4 & 1 HP Micanan trolley operators

OSH-6434-ECB-LH

Manaras Opera-SH 1 HP 480V 3 Ph with Electronic Circuit Board Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

PHOTO-008E1

Manaras Non-Monitored Photoelectric Cells Nema 1 5-45' Range

Thru-Beam type

.421-334-R

Cut-to-Length Torsion Spring .421 x 3-3/4" Right Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.421-334-L

Cut-to-Length Torsion Spring .421 x 3-3/4" Left Hand Wound Gold

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-375-INSTALLED

.437-514-L

Cut-to-Length Torsion Spring .437 x 5-1/4" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.437-334-L

Cut-to-Length Torsion Spring .437 x 3-3/4" Left Hand Wound Red/Green

Priced per inch - cones sold seperately
For factory installed cones use part no. C-375-INSTALLED

.406-514-L

Cut-to-Length Torsion Spring .406 x 5-1/4" Left Hand Wound Blue/Yellow

Priced per inch - cones & filler sold seperately
For factory installed cones use part no. C-514-INSTALLED

.319-514-L

Cut-to-Length Torsion Spring .319 x 5-1/4" Left Hand Wound Blue/Green

Priced per inch. Cones sold separatly.
For factory installed cones order part # C-514-Installed

.312-514-R

Cut-to-Length Torsion Spring .312 x 5-1/4" Right Hand Wound Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-514-INSTALLED

.295-6-R

Cut-to-Length Torsion Spring .295 x 6" Right Hand Wound Blue

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

.283-6-R

Cut-to-Length Torsion Spring .283 x 6" Right Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-600-INSTALLED

.283-514-L

Cut-to-Length Torsion Spring .283 x 5-1/4" Left Hand Wound White

Priced per inch
For factory installed cones priced seperately - use part no. C-514-INSTALLED

ME117-2W-BLK-U

Miller Edge 2-Wire Black Universal Outlet Sold by the Foot

Electromechanical slide in edge for 1" to 2" sectional doors.
Touch sensitive signaling allows for immediate stopping or reversing of motion. The ME117 is resistant to water flame and most common greases and oils.
Temperature range: -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration

.......more details