Devanco Canada - Get The Right Garage Door Opener‎ and Parts

NEW-HAMP-XL

Garex Ready to Install Country Style Special Order

Insulated garage door designed to be energy efficient with R-16 thermal resistance value
With 11 vertical lines featured in the embossing adding a more contemporary touch
Door Thickness: 1 ¾" (4445 mm) / RSI 281 (R-16)

CHAINTENS125DC

LiftMaster Chain Tensioner 1-1/4" MAXUM DC

For use with various LiftMaster® MAXUM DC Standard-Duty and Industrial-Duty Commercial Door Operators; manufactured after 2023 only.
Chain Spreader for Maxum for 1" door shaft

A22K

Erone Krypto 2-Door IP Controller

The ATRIUM A22K two door IP controller works perfectly with the most popular Wiegand card readers or with the embedded KRYPTO high-security solution providing the best of both worlds in access control.
KRYPTO is the easiest solution to manage DESFire® EV2/EV3 smart credentials on the market making worries of card cloning a thing of the past.
The auto restore of encryption keys upon power failure ensures an effortless system start up and management.
Additionally the A22K can easily be converted to an Elevator Controller (A22KEC) Schlage Door Handle Controller (ADH2K) or Aperio Door Handle Controller (A2PK) as needed.
Controls 2 doors / 4 readers (entry/exit per reader port)
Add more A22Ks to expand your system up to 500 doors

.......more details

Wireless System Chart

TDC7-12

Liftmaster Comm. 12FT Trolley Angle set (10-5812-P x 2) and #48 chain pack (TDC48-12) ***Actual length 179"***

Double Angle Rails for doors up to 12'6" high
Includes #48 chain pack

SPR50B42X1

Sprocket 50B42 1" shaft 1/4" KW

42 tooth sprocket for #50 chain

GALV-262-258-L

Cut-to-Length Torsion Spring .262 x 2-5/8" Left Hand Wound Galvanized Red/Yellow Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

BEA-10-MINI-BRKT

BEA Mini Industrial Bracket Adjustable 6-12 "

Adjustable from 6 - 12 inches (up to 4" maybe cut off for shorter applications)
12" x 2.5" Mounting Face
Fasteners NOT Included
Carbon Steel Black Powder Coated

Installation Guide

BCSI-PM504

Pivin Drapeau Limit Shaft Kit BCSI Gate Operator ** Price by Quote Only

Includes: Switch Shaft Bearing Plate

36350

Doorlec Reversing Time Delay 1.5 sec. 24VAC

In closing cycle door will stop for 1.5 seconds and reverse to fully open

LA400CONTUL

LiftMaster Standard 24VDC Control Box for Single and Dual Gate Applications Batteries Incl. UL325

Complete control box for new LA400U 2018 UL325 compliant
Includes box control board and batteries.

K80-38735

LiftMaster Vent Plug Kit HCTDCU

MR00001

Micanan Brake Disconnect Cable 3/32" x 12" Long

400CBAC01

FAAC 400-220V Operator Only ** Price by Quote Only

P-831T

Pulsar Stationary TransmitterO/C/S 3-Btn 1-Door 318 MHz

Open/Close/Stop stationary remote for 1 door.
Designed for commercial automatic door and gate operator applications.
This transmitter can operate a single receiver connected to one operator
Compatible with 3-channel Allstar and MVP receivers
Easy access to battery and coding switch
Power: 9-volt battery

.......more details

Programming instructions

P-8833TC-OCS

Pulsar 3-btn 3-Door O/C/S Transmitter 318 MHz

Allstar compatible
OPEN-CLOSE-STOP 3 doors
8 dipswitches 318 MHz

Programming instructions

150BL

1-1/2" Light Brush Insert 6ft Long

Polypropylene bristles
Box quantity 50 pcs

STD-YZ-MINI

Janus Mini Storage Latch Yellow Zinc

Standard mini storage latch zinc with hardware

41D3483

LiftMaster Chain Assembly Kit 8'

For use with various chain drive garage door openers that utilize a T-rail and have a 8' garage door

BNC-M-F

BNC Adapter Male to F-Type Female Connector ** To Extent of Inventory

BNC male to F female connector
Designed for RG6 coaxial cables RG59 security camera etc.
Made of nickel-plated and gold plated contacts for better corrosion protection

OSH-6213-CONT-LH

Manaras Opera-SH 3/4 HP 240V 1Ph Contactor Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual

ZAP-8825-3

Zap 8825 Series-3 1HP 115V Medium Duty Jackshaft Op

Compatible door sizes: Up to 240 sq. ft./1200 lbs.
Contains the motor two pulleys & one belt
Requires 7” side clearance & 3 ½” clearance above center spring shaft
Features include auto close timer cycle counter and service due reminder
Auxiliary capabilities include interior/exterior lighting wall controls swipe card devices dock equipment motion sensors alarm systems & more
Simple installation of motor assembly to spring shaft

.......more details

SBB-2-V3

2" Safety Bottom Bracket European 231721 Sold as a Pair Torque Force

Includes 1-Right hand and 1-Left hand
Zinc plated Steel
Max Door Weight: 1000 LBS
Cable attachment: Adjustable
Protective cover: Yes
Use with: Straight track 2"

.......more details

GH-343-1.5

Doorlec Industrial Jackshaft Door Operator 1.5 HP 460V 3-Phase

Custom-designed extra heavy-duty industrial-type electric door operator
Worm gear reducer 40:1 ratio
#60 roller chain and sprockets from operator shaft to door shaft.
Door speed: 7 inches per second (approx.)
Adjustable torque limiter
Rotary type limit switches

.......more details

LJH-311-1/2-RH

Doorlec 1/2 HP 115V 1PH Jackshaft Operator Right Hand

CSA approved
Heavy duty industrial type control station open close stop 24V. control circuit
Universal mounting right or left
Floor level disconnect device electrical and mechanical
Emergency chain hoist operation on LJH model only
Colour code wiring diagrams

.......more details

Technical information

821LMC-S

LiftMaster Smart Garage Control White

Smartphone control: Control secure and monitor your garage door from anywhere.
Universal: Works with all major brands of garage door openers manufactured after 1993.
New design: Compact modern design with a white finish that blends in with ceilings walls and garage doors. New mounting plate simplifies install.
Improved setup: Bluetooth Low Energy (BLE) integration makes setup easier than ever.
Download the myQ® App and follow the in-app instructions to get set up in minutes.

Installation manual Manuel d'installation Product guide Guide de produit

50074

Doorlec Flashing Light Option for TCBOD 120 volts can be field installed

Light package with flashing relay

MA015

LiftMaster Transformer 24V

Mega Arm transformer
Dimensions: 2-3/4"L x 3-3/16"W x 3-3/8" D
Model: 21-33711
Line: 1-2/5-6 115/230V 50/60 Hz
Load: 7-8/11-12 24V 130VA(SERIES) 7-8/11-12 130VA(PARALLEL)

BCSI-PM31

Pivin Drapeau Disconnect Lever BCSI ** Price by Quote Only

For industrial slide gate operator

6200-2-4-SEALED

Roller 6200 Sealed Bearing 2" White Nylon 3.48" Short Stem

2" diameter white nylon tire
6200 sealed precision bearing
Zinc plated 4.56" Overall length 3.48" stem
Rating: 100lb; 100000 cycles of a 12′ door

C-334-DUPLEX_INSTALLED

Spring Fitting Pair 3-3/4" for Duplexing (Short) installed

Universal thread for use in either LH or RH wound springs.
Pair includes: (1) winding & (1) stationary.
Maximum wire size diameter: .4062".
Set screw installed: 3/8"-16 x 1-1/2" (2).
Mounting: 1" tube or solid shaft - min. 1/2 turns on the set screws.
3-3/4" fittings can be combined with 6" spring fittings for duplex assembly.

.......more details

GUK-BX

Genie Universal Wireless Keypad 41249R

Works with most major brand garage door openers. Compatible with Genie Intellicode (rolling code) Genie 12 and 9 switch systems going back to 1988.
Also compatible with Overhead Door Chamberlain Craftsman LiftMaster Wayne Dalton Linear Megacode Xtreme Garage Ryobi Sommer and Marantec. •With the Genie Universal Keypad you can control a combination of up to 3 different garage door openers. Each of the 3 openers can be programmed individually of the others so having multiple brands of openers controlled by a single keypad is not a problem.
Powered by two triple-A batteries (AAA)

MADCBB3

LiftMaster High Traffic DC Barrier Gate Op. with batteries UL325 ***Must include (2) x 29-NP712 battery***

24VDC barrier gate operator with battery backup
Continuous-duty motor with soft start/stop
Exceptional starting torque and continuous operation
Heavy-duty motor supports 6000 cycles per day
Operator speed of 2.5 seconds to open or close
Aluminum alloy chassis

.......more details

LDCO863B

Linear DC Powered Garage Door Opener Accepts Both Belt or Chain Rail

Ultra-Smooth and Quiet Industry leading performance with variable speed operation soft start/stop and ultra quiet motor
Integrated Battery Backup Energy-Efficient LED Lighting Long life dimmable LED light panels included. Secure.
Responsive Remote Control Linear MegaCode remote controls operate over long range and employ high-security technology
Release the operator’s quick-disconnect trolley to open or close the garage door manually
Self-Diagnostic System: Confirms proper operation and alerts users both audibly and flashing the lights. In the event of a problem it pinpoints the trouble and alerts users by flashing the courtesy lights
Linear ® Smart App Advanced real-time monitoring and control of garage doors from any mobile device. * Assign custom access and permissions for up to 10 authorized users and schedule door and light operation.*Wi-Fi and internet connection required

.......more details

Remote compatibility chart

GAREX-W/STRIP

Garex Weatherstrip Special Order

specify size color details when ordering
Please call for pricing

27091A

Genie Limit Worm Gear for PMX500

Limit worm gear sits in the Limit switch plate and works with the Limit Worm Drive to activate the limit wheel
Works With Genie Models PMX 500-IC/B IC250/B

TTC-MODULE

Timer to Close Plug & Play Module

Adjust door closing times from 1 second to 5 minutes
Adjust pre-closing warning times from 2 to 5 seconds
Easy-to use "Plug and Play" connector
Make adjustments using the module's LCD display
Requires installation of monitored entrapment device
111114.500307

.......more details

41D9204

LiftMaster Wire Harness LED

Same as 041D9204

URBAN-R12

Garex Ready to Install Door Special Order

R12 Insulation - Woodgrain with 1 narrow shadow line at the top and bottom of each panel - Available in steel white or black - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements

PREM-SEL-XL-R16

Garex Ready to Install Door Special Order Premium Select XL R16

R16 Insulation - Long Panel - Available in steel (std colours) or aluminum (white and grey) - A variety of decorative windows can be added - Custom colours can be factory painted - Multiple hardware configurations are available to accomodate site requirements - Composite end blocks eliminates corrosion and wood deterioration

RN1124-10

Roller 2" Nylon 4" stem 11 ball White 10/PKG Sold per Pack

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.69"
Box qty: 15 packs of 10 Box weight: 49 lbs (2-4-11 White Nylon)

PRO-HHD-7525U-R

Micanan 3/4HP 220V 1P Heavy-Duty Jackshaft N1 Eyes Monitored ECB Right Hand

3/4 HP208V 3PH Industrial Continuous Duty Jackshaft Operator Ideal for Sectional Doors Rolling Steel
Monitored logic board with integral 372Mhz radio receiver that can hold up to 20 transmitters (MK-00647/ MK-00653/ MK-00659) or 200 of the 1 channel hand held transmitters (MK-00660).
N-1 Through-beam (MK-00649) photocells included. Other options available.
3-btn O/S/C (02-103) wall control station included
Adjustable Friction Clutch 5L320 drive belt
#50 Roller chain 18 tooth door sprocket included

.......more details

Installation Manual (EN)Specification Sheet

K75-13074

LiftMaster Straight and Curved Door Arm Kit APT

Compatible with LiftMaster® Model APT trolley Operator

MF00003

Micanan R.H. Phillips Machine Screw 4-40 UNCx1-1/2

crew to hold double limits

17350

Doorlec Cable 5ft with Antenna

2523

Whiting Balancer Bracket End - Curbside for Whiting Roll-Up Doors

Steel construction
Plain finish
Cross Reference: W # 2523 for # 2376 balancer

7-2240

Richards-Wilcox 3" Roller 7/16" Shaft Dia x 9" Long Shaft Super 3 *** Call for Availability

Original Richards-Wilcox part

RSW12UL

LiftMaster Res. / Light Comm. DC Swing Gate Operator 12VDC Heater Not Incl.

Includes safety device LMRRUL Monitored Retroreflective Photo Eye enhanced retro-reflect
Features battery backup that provides up to 147 cycles or 63 days of standby power
Smooth Start/Stop Operation and mid-travel reversal extend operator and hardware life.
Heavy-Duty Commercial Gear-Driven Transmission provides unsurpassed reliability.
myQ® Technology enables you to securely control and monitor your gate operator from anywhere
Security+ 2.0® safeguards access with an encrypted tri-band signal to virtually eliminate interference and offer extended range.

.......more details

Sell sheet Brochure

RADIO-RE901A

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver with Commercial Antenna

For Commercial/Industrial Garage Door Applications
Wall Mount
DIP Switch and Rolling Code Technology
Sixteen (16) Fixed Codes / Receiver
313 MHz & 390MHz Radio Frequency
Controls One (1) Door

.......more details

Programming instructions

ESM500

Erone 1200lbs Exterior Maglock Surface Mount Stainless

Exterior applications & High-traffic areas
Power requirements: 12/24VDC
Current Draw: 500mA @ 12VDC 250mA @ 24VDC
Monitoring sensor
Visual feedback (red & green)
Optional L/Z bracket sold separately: LZE500

.......more details

Installation manual

7M-NICE-BAR-ASBY

NICE Replacement Bar Assembly for M7BAR Barrier Gate

Bar assembly comes with:
(1)XBA15 -- 3M BAR
(1)XBA14 -- 4M BAR
(1)XBA9 -- EXPANSION JOINT FOR CONNECTING BARS
(2)XBA13 -- RUBBER IMPACT PROTECTION STRIP
(2) WA10 -- RED ADHESIVE REFLECTIVE STRIPS

.......more details

NICE-OVIEW

NICE Oview Display Programmer

�
Type: control programming and diagnostics unit for devices equipped with BusT4 connector
Technology adopted: half duplex 19200 Bps serial connection on differential bus for delivery of commands modification or parameters and monitoring of diagnostic data
Maximum number of hourly commands: 64
Event log: storage capacity of 400 events
Operating temperature: from –20°C to +55°C • Dimensions (mm): 107 x 61 x h 20 (with wall-mounting support: 125 x 70 x h 32)

.......more details

UTIL001

Utility Limit Switch Telemecanique w/Roller (part # XCKL115H7)

Installation Manual

MA012

LiftMaster Cam Arm with Magnet

Cam Arm for Liftmaster Mega Arm gate op.

BG790-5021

LiftMaster Ind-Duty Wishbone Barrier Gate Op 1/2 HP 230V 1Ph - Comes w/Arm & Counterweight

A reliable gear-driven barrier gate operator that is perfect for industrial applications.
This barrier gate is designed for Wishbone-Type Arms with lengths of up to 24 ft.
The BG 790's powdercoated weather-resistant steel enclosure and its 1/2 HP commercial motor ensure strong dependable performance.
Standard Features: Control inputs and Adjustable limit settings
02-102 Open/Close Push Button Included

E3K-2018

Omron Retro-Reflective Photocell w/Built-In 10K Resistor UL325-2018 *Same as model E3K-R10K4-NR-1

Fully complies with UL325-2018 standard for gate ops. that use the 10K resistor method and also the Normally Closed method
Easy to wire terminal strip
Plug-in replaceable outputs
Range: 40ft
Power: 24-240V AC/DC
The E3K-2018 has a second relay to accommodate traditional dry contact for non-monitored applications.

.......more details

Wiring Diagrams Sell sheet

821LMB-SENSOR

LiftMaster Extra Door Sensor for 821LMB Second Generation *** To Extent Of Inventory

This add-on door sensor works with the MyQ Smart Garage Hub to monitor and control a second garage door opener.
This version of the MyQ door sensor is only compatible with the new MyQ Smart Garage Hub by LiftMaster Model 821LMB.
Installation and Programming is easy: Mount to inside top panel of garage door and add to an existing MyQ account through the MyQ app
Not compatible with MyQ Garage (821LM)

MK-00404

Micanan Reversing Contactor ABB Size 1 120V w/Interlock

LC2K1210B7 mini contactor

MV-00237

Micanan Key Switch O/C/S Btn Tamper Proof w/Best Core Cylinder Nema 4 Surface Mount

111075.0001

Overhead Door Poly VBelt for RSX and RMX Jackshaft/Hoist Commercial Operators

Serpentine belt compatible with Overhead Door standard duty RSX and RMX operators.
6-rib poly VBelt
31"

ME110-2W-BLK-L

Miller Edge 2-Wire Black Left Hand Outlet 7/8" wide x 3/4" high Sold by the Foot

Electromechanical pressure sensitive edge for counter shutters rolling doors and barrier arm applications.
Touch sensitive signaling that allows for immediate stopping and reversing of motion.
Temperature range -30F to 155F
Lead wire: 22 gauge universal
Sensitivity: nominal 6-8 PSI
2 wire NO configuration.

.......more details

Worksheet

SPRAY-5P6

Aluminum Touch Up Spray Paint 350g Iron Ore / Minerai de Fer #5P6

140g

PBC-3

Push Button Control Station 3-Btn O/C/S Stainless Steel Face Plate Nema 1 Flush Mount

Single gang box
Face plate: 4-1/4" H x 2-3/4" W Back Box: 4" H x 2" W

DM120-125-T/FORCE

Cable Drum High Lift 120" D575-120-1-1/4" Pair Torque Force

120" High Lift aluminum die cast alloy cable drums.
3/8"-16 x 2" hardened cup point set screws installed with red heads.
Pair includes: (1) LH and (1) RH. Color coded: Red=LH and Black=RH.
Maximum high lift: 120".
Maximum door height: 144" + High Lift.
Rated lift per drum: 500 lbs.

.......more details

SRB-1

Standard Riser Bracket for 6" Above Dock or Less 1"

Standard 1" Riser Bracket for 6" Above Dock Door or Less
Also available with 2" 3" & 4" Extensions or with Cutout - Call for More Information

LLB420-22SF

Steel Faced Laminated Bumper Black 4" Projection L-Shaped 20" x 22" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required
“Gliding” heavy-duty steel face is 3/8” thick and independently anchored with elongated holes to face of bumper allowing bumper to compress AND offer high surface abrasion resistance
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.

.......more details

LB410-12

Laminated Bumper Standard Black 10" x 12" 4" Projection Horizontal Installation

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

MJ00015

Micanan Brake Shoe Assembly for Old Style Manaras Operators

Assembly includes both right & left brake shoe

RP-CAP-RSL-64-77

Lynx Capacitor RSL (1/2HP) 64-77 MFD ** repl. by 70-84 MFD

Also used in the 1/3HP openers. Replaces RP-CAP-RSL-53-64

VWS-34-WHITE

Screw Colored for Vinyl Weatherstrip #8 x 3/4" 1000/Box White

Pan head
S point

MOD076

Manaras Motor 208V/1Ph 60 Hz Modification No extra charge

The standard 240V/1Ph op. is coverted to 208V/1Ph incoming power supply

DB13

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

1005-1-3/8-10'

Aluminum Bottom Retainer U-Shaped 10' Long

For door thickness 1-3/8"

XRS-02

Rodent Shield 2 x 8" x 1" Strips Peel and Stick Sold in Pairs

Prevents damage to garage door side seals due to gnawing rodents
Made of high quality stainless steel so it will not rust
Invisible from the exterior. Installs on the inside of weather strip - no painting or covering is required.
Easy installation. No tools required just peel and stick
An inexpensive solution to a common rodent problem around households
One size fits all. No need to measure or trim

.......more details

SL-310R

Skylink Universal Receiver 310 MHz ** No Longer Available **

This "Universal" Receiver guaranteed to work with any garage door opener regardless of age or brand (US & Canada only).
Works with Skylink Universal Transmitter: Model SL-310T SL-310T2.
Operates at 310MHz.

BD3240

Piezo Warning Buzzer Alarm with Volume Control 24VAC/DC

2-1/2" long 90 DBA

CF-101-12

Commercial Side & Top Weather-Strip 12' Long Aluminum / Vinyl

Same as Garaga CF101

LVB420-11SF

Steel-Faced Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually

Used on docks where excessive friction from up and down trailer movement occurs (yard jockeys air ride trailers etc.).
Can be used in material handling application where medium to heavy dock protection is required.
5/8" anchor bolts mounted through pre-drilled holes into dock or can be welded to curb angle.
Steel face is 3/8" thick heavy duty high carbon steel that is mounted over a laminated dock bumper.
Plate to be welded to 2 or 3 steel support brackets which are to extend back to the 3/4" supporting rods.
Brackets to be punched with elongated holes to allow steel face to "float" upon impact.

.......more details

1116633121.S

Overhead 1-btn Transmitter 312 MHz ** No Longer Available

Replaces the 1091303121.S
1 channel transmitter opens and closes 1 door
Codes using 9 dip switches with 3 positions
Battery (ALK12V) and visor clip included
Compatible with all Overhead Door 312 MHz frequency garage door openers that were manufactured before 1996.

MA024RDOT

LiftMaster White Aluminum Arm with Retro-Reflective DOT Tape 12 ft

For use on Mega-Arm gate operator
Red White reflective DOT stripe

Additional arm accessories

MOTOR254

Manaras Electric Motor 1/2HP 120/240V 1PH

Continuous-duty base mount 60Hz
This item is compatible with BRAKE011

MCB-421-CONT

Lynx Heavy-Duty Chain Drive Trolley 3/4 HP 220V 1P Contactor Model

Heavy-Duty spur gear chain drive trolley

02-103L

LiftMaster Push Button Station 3-btn Surface Mount O/C/S Nema 1 with Maintenance Alert LED

PBS-3
Open-Close-Stop
Momentary contact
Nema 1
Works with Liftmaster MH commercial operator
Dimensions: 5-5/16" H x 2-3/8" W x 1-13/16" D

.......more details

PRO-TB-5011-E

Micanan 1/2HP 115V 1P Trolley Operator with Brake NM ECB No Eyes

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.
#410 roller chain on 1/2 HP models
Non-Monitored board NO photocells
On-Board receiver holds up to 20 transmitters

D22

Allen Bradley 110V Reversing Contactor

VL-450-LED

Versa Light Dock Light Model 450 LED 42"

Easily Positioned
Durable Construction
Shock/Vibration Resistant
Fan Cooled
Circuit Breaker Switch
Grounded Plug

.......more details

MD-00278

Micanan Roller Chain Nickel Plated #410 Sold by the Foot

ER294-K

Heddolf Long Range Receiver 433 MHz

Up to 1500ft range
Compatible with EX220-1K

21702

Doorlec Close Auxiliary Switch Double Limit DAT

BCH751L5-RH

LiftMaster Hoist Op. with Carwash Mod. and Brake 3/4 HP 115/230 VAC Logic 5 Right Hand ***Replaced by CRBH751L5-RH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with either CPS-UN4
Brake installed on operator

Installation manual Manuel d'installation Sell sheet Brochure

LDCO800

Linear 800 Newton DC Powered Garage Door Opener Accept Both Belt or Chain Rail *Replaced by LDCO863B*

The energy-efficient DC-powered operator that runs at an AC-equivalent speed.
DC drive motor with soft-start and soft-stop for smooth quiet long-term reliable performance.
Optional Battery Backup available for added peace of mind. Sold separately
Low-power standby mode dramatically reduces energy consumption
Supplies 800 Newtons of lifting force for heavy doors
Compatible with belt-drive or chain-drive T or I beam rails up to 10'

.......more details

Installation manual Sell sheet Remote compatibility chart

ULTRA-II-D-TEK

EMX Industries Plug-in Loop Detector (2663-1)

Features a slim design that is compatible with most gate operators that require a dry contact relay input.
No harness required; comes with terminal screw adaptor
ULTRAMETER™ (displays optimum sensitivity setting / diagnostic aid)
Frequency count/reset switch
10 sensitivity settings
Loop diagnostics

.......more details

PULL-CHAIN-ASSY

Pull Chain Spring and Chain Assembly 13' & 14' Doors

Used with a hand chain for full vertical doors.
Eliminates the need for leaf bumpers
Chain can be adjusted for smaller doors

SLC-221

Linear Commercial Slide Gate Op. 1/2HP 230V 1 Ph - Cold Weather Package NOT Included

Integral entrapment sensing system with digital set point for quick accurate adjustment and enhanced safety
Continuous-tone entrapment alarm with reset button
LED diagnostic display for ease of setup and troubleshooting
Selectable pre-start and run alarm with provision for ADA compliant visual pre-start and run alarm
Regulated 24 Volt DC power available for access control accessories
Integrated maximum run and auto close timer (0-9 minutes)

.......more details