Devanco Canada - Get The Right Garage Door Opener‎ and Parts

302850

Linear 2-Channel Multi-Code 12-24V Gate Receiver 300 MHz / 310 MHz

The Model 302850 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency.
The 300 MHz frequency is compatible with standard Multi-Code transmitters
The 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
Operates on 12-24 volts AC or DC power
Two channels
Whip antenna
3-foot antenna coax and bulkhead connector
Codes: 512 (set by dip switches)
RF frequency: 300 MHz or 310 MHz (jumper selectable)
Dimensions: 3.625" W x 5.25" H x 1.5"
Same as: MCS302850

Programming Instructions

SEL2641R433-I

Erone 2-Relay Stand Alone Receiver 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output relay
Power requirements: 12/24Vac/dc
Dimensions: 105 x 45 x 28mm (4.3 x 1.75 x 1.1in)

.......more details

Instruction Manual Sell Sheet Brochure Wireless System Chart

71-199010

LiftMaster 12' Sash Chain Pack with Keyring

Common disconnect chain

TUBE_SHAFT_10FT

Hollow Shaft 1" x 10'-10" Galvanized 16 gauge

When ordering order one foot longer that actual door width

MK00641

Micanan Smart 10.0 Full Feature Circuit Board Monitored with 5 Relays

For 1/3 1/2 and 3/4 Hp - 110/220V 1p 230V 3p
Board has P1 & P2 terminals
Up to 20 transmitters can be programmed

Instructions Manual

MK00488

Micanan Electronic Circuit Board Monitored

Replacement board for PRO-LH (50-11)
Board has terminals P1 & P2
Up to 20 transmitters can be programmed

Instructions Manual

RADIO-14

Manaras MR-1000 1-Channel 24V Receiver 313 MHz ** Replaced by RADIO-RE900

Controls one operator with MT series transmitters.
Operates on 24VAC.
A LED indicates that the unit has been activated.
Can be installed directly onto the control box of a Manaras operator.

Installation Instructions

HAE00048

Linear Helical Gear with Grease

Includes roll pins
Can be used on all Linear / Westinghouse residential operators.
Helical gear measures 2-7/8" diameter

423LMC

LiftMaster 3-Channel Co-Axial Receiver 390 MHz

8" coaxial antenna included
Used for open/stop/close on commercial motors
N/O and N/C selectable
Compatible remote: 33LM

Installation Manual Manuel d'Installation

25-60503

Truck Door T-Style Ramp Handles Curbside (Right)

Black plastic construction
Cross ref.: 39504-2

655202

LiftMaster Pneumatic 14' Sensing Edge with 2-Wire Take-Up Reel

2598

Aluminum 5/16" Cable Eyelet

For use on Whiting dry freight and refer doors
Use with 1/8" stainless or galvanized cable

MGT

Linear MegaCode Gate Safety Edge Transmitter 318 MHz (DNT00068)

The MGT is the industry’s only fully supervised gate safety edge transmitter.
It automatically sends an hourly status report to the access controller indicating battery condition and if the transmitter is operational.
Should the edge sensor be disconnected shorted or tampered with the MGT will report a trouble condition.
Features Include:
Signals access controller for stop or reverse when safety edge activates
No cables or coiled wires

.......more details

Programming Instructions

DM11VL-T/FORCE

Cable Drum Vertical Lift 11' D850-132 Pair Torque Force

11' Vertical Lift aluminum die cast alloy.
3/8"-16 x2" hardened cup point set screws installed with red heads.
Color coded: Red=LH and Black=RH. Pair includes (1) LH and (1) RH. Max. Door Height: 11'-1".
Rated Lift per Drum: 425 lbs.
Max. Cable Diameter: 3/16".
Mounting: 1" solid shaft with 1/4" keyway.

.......more details

RN1124

Roller 2" Nylon 4" stem 11 ball White

White Nylon Roller Wheel Diameter: 2"
Working Length: 3.75" Overall Length: 4.69"
Box qty: 150 Box weight: 49 lbs (2-4-11 White Nylon)

RXTA-200

Pulse Plug-In Receiver 200/300/400 Series Ops 315MHZ

315MHz rolling code plug-in wireless remote receiver for the Pulse 200 and 300 Series door operators.
Mates with the RXTA-100 & RXTA-200 transmitters and other universal/LM (purple) 315MHz transmitters

10PBS61

Push Plate 6"" Square Text+Logo Stainless STL .093 Thru Holes

1/16" thick stainless steel for maximum durability
Single- pole 1 A COM/NO/NC UL recognized
Compatible frequencies: 900 433 or 300MHz
Includes mounting hardwaare flag connectors and hex key

041-0495-000

LiftMaster Keypad Battery Cover

Replacement battery cover only
Compatible with L979S L979M and L979U

SB3381-PAIR

Garex End Bearing Plate 3-3/8" - 1" Commercial Sold as a Pair

15-50B22LGH

Sprocket 22 Teeth 1" Bore 1/4" Keyway w/SS

ox Quanity is 18 per box

RTBH-6114-AM06

Manaras Silencio HD Trolley Op. 1HP 120V 1PH Monitored VFD

The Silencio® RTBH-A.06 is a heavy-duty apartment type garage door operator designed for use on properly counter-balanced industrial standard lift sectional doors which possess high-cycling daily frequency requirements
Soft-Starts and Soft-Stops
Electrically activated drum-band type solenoid brake
Ceiling-mounted with 8.69" headroom clearance required below the tracks
Dimensions: Back Room: door height + 4'5" (1350 mm) Head Room For Tracks : 5.625" (143 mm) above the highest point of door travel
Tracks sold separately

.......more details

202-0019

TNR Bottom Bar Arm Black Harness 75D (2622126) ** Price by Quote Only

same as 2622126

MSJ-6113-M-N1-RH

Manaras MSJ 3/4HP 120V 1Ph Monitored Board w/N1 Eyes RH

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
35 cycles per day > 150 cycles per day

.......more details

14-1000

PVC Roll 6" x .060 x 400' Standard Clear Smooth for Replacement Strip Curtain

Suitable for most average applications.
Temperature Range: -20°F to 150°F (-28° C to 66° C).
Formulated with ingredients that meet USDA requirements for incidental food contact.

CHI-FS-7522

CHI Fire Shutter 7522 ** pricing by quote only

Door meets 45-minute 90-minute and 3-hour UL ratings with full compliance to NFPA-80 standards.
Standard curtain provides a 1 ½” pre-painted hot dipped galvanized steel slats.
Smooth quiet drop testing thanks to a durable viscous governor.
Simple drop-testing and ability to reset the door which makes for quick operational readiness.
Standard bottom bar slide bolt locks with an optional cylinder lock.
Slat Thickness: 22 gauge Flat slats

.......more details

WR2

Erone Radium Stand-Alone Wireless Receiver 2-Relay 433MHz

Up to 85 transmitter keys
1 NO relay + 1 NO/NC relay (24VA)
Self-learning memorization
Standard pulse output
Power requirements: 12/24Vac/dc
These 433 MHz radio frequency systems offer longer range (up to 250m (820ft) less interference jamming and excellent reliability

.......more details

Instruction manual

MA015

LiftMaster Transformer 24V

Mega Arm transformer
Dimensions: 2-3/4"L x 3-3/16"W x 3-3/8" D
Model: 21-33711
Line: 1-2/5-6 115/230V 50/60 Hz
Load: 7-8/11-12 24V 130VA(SERIES) 7-8/11-12 130VA(PARALLEL)

1184HD

Whiting Hold Open Device 1184 Heavy-Duty Track Mount

This is a field install accessory.
Also known as: Positive Stop Assembly
This is installed onto the panel when the door is opened it is engaged and will keep the door open above the header so there is no hang down of the door.
The door will stay open above the header to eliminated the door being damaged.

210272

Skylink Belt Gear for Atoms Operators

Plastic Gear
Fits Atoms / Atoms+ / Atoms Pro (AT & AN) Series

10MS41-S

BEA Magic Switch Touchless Stainless Steel Single Gang***NLA Replaced by 10MS31U-B

BEA’s MAGIC SWITCH® Family provides a highly accessible and germ-free door activation without physical contact.
Reduce touchpoints in fast-paced environments that depend on sanitation like healthcare retail industrial and commercial settings.
Using microwave technology BEA’s MS41 produces a detection field with a reliable and consistent transmission in interior and exterior applications.
Capable of detecting a moving hand cart or wheelchair.
Plus an adjustable hold time offers flexibility to meet ANSI standards.
The durable design suits sterile wash-down applications such as surgical wash-down clean room and pharmaceutical environments.

.......more details

RENO-B4

RENO 11-Pin Amphenol Style Connector 12-24V Single Channel Loop Detector *** To Extent of Inventory

The Model B is a full featured single channel dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E s vehicle detectors.
All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
Dimensions: 11-Pin Models - 3.00 inches (7.62 cm) high x 1.75 inches (4.45 cm) wide x 4.30 inches (10.92 cm) deep

Installation manual Spec sheet

CP-LX-KEYPAD

Lynx Wireless Commercial Op. Keyless Entry 372MHz

Illuminated Keypad
Weather shutter protects keypad from elements
Wireless Installation
4 digit codes for maximum security
Allows for access without remote or keys
For use with any UL325 commercial operator that has an LX100 or LX900 board

.......more details

Programming instructions

CHAIN059

Manaras #41 chain 48 Pitch (24" long)

Includes 1 chain link

1209

Whiting Roller Hinge Complete

100144

Linear Brake Shoe w/Lining

For commercial door operator

MTR3

Linear 3-Channel Visor Transmitter 318MHz ** To extent of Inventory

Activates three MegaCode receivers
Test/operate LED
Visor mounting clip supplied
Visor clip mounts vertical or horizontal
Power: One 2032 battery
Codes: 1000000+ (MegaCode format)

.......more details

Programming instructions Instructions de programmation

2510-273

Linear 230-Volt Heater for Gate Op

RADIO-RE901A

Manaras 1-Channel 24V Dip-Switch (313MHz) & Rolling Code (390MHz) Receiver with Commercial Antenna

For Commercial/Industrial Garage Door Applications
Wall Mount
DIP Switch and Rolling Code Technology
Sixteen (16) Fixed Codes / Receiver
313 MHz & 390MHz Radio Frequency
Controls One (1) Door

.......more details

Programming instructions

26124

Doorlec Clutch Shaft 11-3/4" x 5/8" LJH

Previous shaft size was 11-3/4" but have now been replaced by 12-5/8" to accomodate larger box size

.192-2-L

Cut-to-Length Torsion Spring .192 x 2" Left Hand Wound Silver

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

SOFT_EDGE-PROFILE

Devanco Canada Soft Edge Profile Sold per Foot

Yellow air-wave edge
Fits most 1-3/8" to 2" bottom retainers
300 feet in a roll

229557

Torque Force EZ Low Headroom Conversion Kit

Reduced headroom as low as 8"
Convert a standard lift door to a low headroom door without using an outside hookup configuration.
Easy to install 3 piece kit
Fits on 15" radius and 12" tracks

MV-00237

Micanan Key Switch O/C/S Btn Tamper Proof w/Best Core Cylinder Nema 4 Surface Mount

MD-00487

Micanan Roller Chain #60 Stainless Steel 10' Pack

CAP2D

LiftMaster Connected Access Portal 2-Door Controller

Cloud-based credentialed access control.
Capacities include: 2 controlled gates / doors
25000 local resident capacity
6000 local event history (FIFO) offline from host
Multiple Holiday and Hold-Open Scheduling including one-time and repeating exceptions
Power: 2V DC Min. 1.5 Amps (transformer not included)

.......more details

MIRF-Z2

Miller Edge Patriot 2 Photo Eye Fail Safe 30ft Non-Contact

Meets current UL325 standards for commercial door and gate operators*
Thru Beam technology minimizes false reflective signals
Travels with the door
Easy to Align
No need to stock special sizes - works up to 30 feet wide or up to 50 ft wide depending on the model
Convenient - Assemble and install in the field

.......more details

40-3505

LiftMaster Gate Warning Sign Plastic English

25-60100

Truck Door Fork Lift Plate

Steel Construction
Black E-coat finish
Allows use of fork lift to open door from truck bay or when loads shift against door
Cross Reference: T # 69131 W #1092
Dimensions: 18" long x 5.5" tall with 1.5" lip

029C98205

W-Style Complete Replacement Door White Stainless Steel Pkg 029C98205

Manufactured to exact size fully assembled tracking and spring assembly included.
98" w x 105" h
Price varies according to size

CF-101-12

Commercial Side & Top Weather-Strip 12' Long Aluminum / Vinyl

Same as Garaga CF101

760130

FAAC Capacitor 115V 25 MFD

27191A

Genie Opener Sprocket 10 Tooth

10 Tooth Sprocket.
For Chain Drive Models: IC250 IC250B PMX60 PMX65 PMX75 PMX80 PMX85 PMX300-IC/A PMX500IC/A PMX300IC/B PMX700 PMX1200 GPS700 GPS1200-IC.

41C5141-1

LiftMaster Square Rail Trolley Kit Chain Drive

Same as: 062313 41C5141 41C5141-1
Compatible with all Chamberlain and Craftsman square rail chain drive models

BL229-GATE-OP

Automatic Systems Universal Perimeter Raising Barrier Gate 120V

Highly configurable barrier designed for many applications and environments
Numerous accessories offered allowing to meet various installation constraints and various requirements in terms of security
Barrier equipped with control unit allowing operation perfectly adapted to every situation
Change of configuration or operation possible even after initial installation of the product

Bilingual parts catalogue Technical manual

.218-325-DS75

Mini Storage Spring for DS75 4x7 Door

Spring only with loop ends

BELT-GEAR

Skylink Belt Gear for EQ Operators 210131 ***NLA

New model # 210131 no cover is needed
Metal Gear

39165R

Genie Series II Wall Console

Three-function wall console with backlit panel that is easy to locate in the dark.
Sure-Lock mode allows you to lock-out the keypad and remotes for extra security at night or while on vacation
When Sure-Lock™ is ON and the garage door is in the fully closed position the powerhead cannot be activated by the wall console or a remote.
Same as GBWCSL2-BX

WOR

Linear Wiegand Output Receiver 318 MHz

Designed for use as an access control interface for Linear’s block coded digital transmitters.
The unit receives signals from transmitters adds a facility code to the data and sends the information to the Wiegand input of the access control panel via a 5-wire connection
Ideal way to facilitate handicapped access
Multi-button transmitters can double as personal emergency devices for triggering security alarms
RF input/Wiegand output receiver supports 26 30 and 31-bit data formats
Wide selection of MegaCode (over 1 million codes) format transmitters with available block coding

.......more details

ALUM-523

Aluminum 24" x 100' Spool Slate / Charbon # 523

20% thicker than the aluminum sold in retail stores (0.022" )
Gentek # 523
Reverse side is #431 Bright White

Colour chart

CONTACTOR041

Reversing Contactor 1 Ph-9A-24VAC

FHKS3D-74

Stainless Steel Face Hardware Kit 3" Track Double End Stile 4 Panel 7 Sections

Kit includes: Top & Bottom fixtures Center hinges End hinges and Hinge screws.
304L rust-resistant stainless steel
12 gauge

MD-00035

Micanan Offset Link #410

MALED12

LiftMaster LED Barrier Arm 12 ft

The NEW LED Barrier Arm provides exceptional visibility 24 hours a day.
Durable aluminum arm with integrated red LED lights on one side and Red/White DOT tape on both sides.
Ideal for use with the Mega Arm and Mega Arm Tower

MWTA12

Miller Edge Transmitter with Audible Alarm Small *** No Longer Available

The MWTA12 safety edge transmitter is designed to provide wireless signal transmission form the safety edge to the motor controls.
It is easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction a closed circuit signal is created and is sent to the transmitter.
The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor.
The gate or door stops movement and will then reverse the direction of travel.
Comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced.
Comes standard with a NEMA 4 weather-proof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided.

.......more details

Installation Manual Sell Sheet

CS202S-5-100

EMX Car Sense Vehicle Motion Detector ** Discontinued Offer VMD202 instead

Low voltage used for automatically opening gate when exiting property without requiring the use of a remote control transmitter key pad or any other operator control device.
Can be located up to 150' from the gate. Senses automobiles on a driveway up to 12' wide moving more than 5 m.p.h.
A second probe can be connected in parallel for additional coverage or for automatic opening in or out.
Available in a five wire (recommended for use with GTO operators) and a three wire version.
The CarSense 202 is buried in the ground so it will not be noticed by a potential intruder or vandals.
The CarSense 202 accepts a wide range of power input of 9 - 41 VDC and 6-29 VAC. The low current consumption of 250uA and 12mA detected make the CarSense 202 Slim a great choice for solar applications

.......more details

Installation Manual Sell Sheet

OSH-6534-ECB

Manaras Opera-SH 1 HP 600V 3 Ph with Electronic Circuit Board

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

Installation Manual Sell Sheet

AK-21

Linear Interior Digital Keypad***to extent of inventory

The keypad is housed in a rugged plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright easy-to-read yellow graphics.
It is supplied with four different plastic snap-on mounting bezels to customize the look of the keypad. The satin-chrome bezel comes factory installed on the keypad. The white ivory & bronze bezels are packaged separately.
Up to 480 entry codes from 1 to 6 digits in length can be programmed. They can activate either or both of the relay outputs.
Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for timed or latch-on/latch-off toggle operation per each individual entry code.
The on or off toggle state of a relay is maintained even after power interruption. When power is restored to the keypad each relay will assume the state it was in when power was removed.

Installation Manual

41A6104

LiftMaster Cable Tension Monitor

Used on jackshaft model residential garage door openers

20-1100C-2P

LiftMaster Electric Motor 1HP 115/230V 1P

Replacement motor for SL595

36179R

Genie Traveler Assembly for Screw Drive

Fits model 3060 L/M
Replaces: 25589R 25589S 25589C 20414R 34107R 20073R & 24357R

GRD-2

Linear 2-Channel Delta3 Gate Receiver 310 MHz (DNR00102)

Auto voltage sensing - no jumpers to set
Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 128 (set by dip switches)
RF frequency: 310 MHz

.......more details

Programming Instructions

MGR-2

Linear 2-Channel MegaCode Gate Receiver 318 MHz *** To Extent of Inventory

Two Form ”A” (normally open) relays rated at 30 Volts AC/DC up to 5 Amps
Supplied with whip antenna three feet of coaxial cable and bulkhead connector
Memory: storage for up to 40 MegaCode transmitters
Power: 12 - 30 VAC or 10.5 - 30 VDC
Codes: 1000000+ (MegaCode format)
RF frequency: 318 MHz

.......more details

Installation Manual

QUICK_CLOSE

Commercial Quick Close Device / Universal Timer V8

This device will automatically close the door as soon as the vehicle passes through the safety beams.

Wiring Instructions Monitored connection Non-monitored connection

309013

Linear 1-Channel Multi-Code Receiver 310 MHz

Three tabs for universal mounting
One N/O relay
Compatible with 310 MHz Stanley and Multi-Code transmitters only.
Operates on 24 VAC power
One channel
Codes: 1024 (set by dip switches)

.......more details

Programming Instructions

8010-3FT

Bottom Sweep for Entrance Door White ** No Longer Available

Height adjustable
Vinyl: White
Length: 3 ft

PL-A03-NEW-BRD

Lynx Replacement Logic Board New Version

New version board works on operators with a red cover
Replacement logic board for Napoleon/Lynx Proline garage door opener
For openers built June 2008 or later (date code 0806 or newer)
This board does not have a transformer.

CABLE-15

Manaras 15ft coax cable extension with BNC connectors

Used on Radio-15 to extend antenna

RADIO-29

Manaras Commercial Receiver Antenna

Commercial receiver coaxil antenna

831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

Three channels - three relay outputs
Oil-tight JIC ABS case
Terminal strip for wiring
Wire whip antenna with "F" connector
Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
Power: 24 VAC/VDC

.......more details

Programming Instructions - Dip Switch Version Programming Instructions - Learn Button Version

4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

For angle application (45 degree)
For use with Light Brush or Vinyl Insert.

BLOCK-RED

Spring Repair Blocks .3750-.4305 Pair

For the temporary repair of a broken spring.
Wire size: .3750 - .4305

Z9403

Coupler 1" Bore Adjustable Silver

Malleable Iron for strength
Set screws and jamb nuts installed
1" bore with 1/4" keyway
Thickness: 0.35"
Painted silver

H11G04

Hinge #4 x 11 gauge

11 gauge # 4 hinge - 0.72 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

25-10402

Truck Door Pull Strap (15.5") with Zinc Retainer for Roll-Up Doors

Durable 2" wide black nylon construction for added strength and durability.
Custom lengths available
Cross Reference: 257000

DBE-30

Molded Rubber Bumper Black 30" L x 4 1/2" W 3" Projection 6-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Molded bumpers are molded in one piece and will not warp rust rot or harden.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles.
Bumper comes with 6 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

.......more details

27-20202

Truck Door Winding Cone for Dual Spring Assembly for Whiting Roll-Up Doors (2-3/16")

Zinc die cast construction.
Universal design that will work for both Curbside (RH) and Roadside (LH) wound springs.
Cross Reference: W #2518
2-3/16" I.D.

MP-00001

Micanan Timer to Close 24V Modification

3-button o/c/s function timer will start counting from fully open reverse and reset from any device
24V modifictation available on control circuit ( R) and ( M) and is included with the new full function smart board (E)

.243-2-R

Cut-to-Length Torsion Spring .243 x 2" Right Hand Wound White/Yellow

Priced per inch - cones sold seperately
For factory installed cones use part no. C-200-INSTALLED

25E10220

Truck Door Top Closure Plate & Slide Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Included: Base plate slide bolt & flanged nut
Improved heavy-duty reinforced slide
Adjusts top panel for firm seal
Cross Reference: W #6944

25-10001

Truck Door End Hinge for Todco Roll-Up Doors

Zinc plated steel construction
Four-knuckled to ensure smooth door operation
Cross Reference: T #69035 W #4007 220000

37028C.S

Genie Control Board for Model 2022 ** Repl. by 39537R.S (no cover)

For ReliaG 800 model 2022 gaarage door opener ◾ Genie 37028A Control Board for Genie Models 2022 2024 and 2042 Chain / Belt Drive Openers ◾ Works for the following models only: ◾ ReliaG 800 (2024) PRO Series 1 Piece Rail ◾ QuietLift 800 (2042) ◾ ChainLift 800 (2022)

LDM-1

Long Distance Module

Compatible with all door and gate operators that use 24V AC
20 mile range

DR2

Linear 2-Channel Delta3 Receiver 310 MHz *** NLA

Activates two devices
Wire lead antenna
12 and 24 Volt models
Two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems.
The receiver can be activated by any of the Delta-3 format transmitters
Mounting bracket supplied

.......more details

Installation Manual

487132

Bircher Easy Loop D Vehicle Detection Microwave Motion Sensor ***TEST LOOP ONLY

Complementing loops with versatility for all applications
No need of ground loops - no construction work
Advanced 79 GHz radar technology with static object detection
Reliable activation presence and anti collision
Quick to install easy to configure via appy
Operating voltage: 9-24V DC

.......more details

MB-01204

Micanan Electric Motor Only 1/2HP 575V 3PH

C-Flange motor fits: GT GH GHC GSD

D-TEK-LP

EMX Industries Low Voltage 11-Pin Single Channel - Dual Relay Loop Detector (2500-1)

Power Supply: 12-24 Volts AC/DC
Current Consumption: < 9 mA
Operating Temp: -40°F to 180°F
Surge Protection: Zener Diode /MOV
Output Relays (2): 1Amp 30 VDC
Loop Input: Transformer isolation lightning and transient protection (1)

.......more details

Manual - LP-D-TEK Spec Sheet - LP-D-TEK

CPT215-END-KIT-T3

Miller Edge End Kit for CPT215 Doide Capacitor (T3) Configuration

Kit contains: 2) Caps (2) cages (1) wired plug (1) diode capacitor plug (1) non-mon. plug (2) screws

TDC12X1BMC

LiftMaster MAXUM Trolley DC Comm. Op 3/4HP Equivalent 120/240V 1PH 60 Cycles/Hr 1200LB

Smooth Start/Stop Operation - DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator.
Faster Speed - Average of 12” per second opening on sectional doors.
Battery Backup Option - (battery backup kit sold separately).
Floor-Level Wall Controller - 4-line LCD display gives you access to programming troubleshooting and diagnostics at floor level saving time and money.
Wi-Fi® and myQ® - Easily connect to myQ Facility via Wi-Fi for visibility into what is happening at your door and control it from your web browser; no need for additional hubs or accessories. Know what accessories activate the door (remote transmitter keypad etc.)
Drive Type 65:1 Gearbox with #50 Chain Output

.......more details

TDC_Installation-manual TDC_Manuel-installation Data sheet Fiche technique Quick connect guide Guide de connexion rapide Ordering guide

OTBHW-6112-AM06

Manaras Apt-Style Trolley Op w/Carwash Mod 1/2HP 120V 1Ph Monitored w/N4 Eyes Silencio

The Silencio operators have integrated noise reducing enhancements which make it 4X QUIETER than the Premium Trolley Apartment model (OTBH-A.05).
A low headroom apartment type garage door operator designed for use on industrial standard lift sectional doors with high cycling daily frequency requirements
Mounting (Low Headroom Design): Ceiling-mounted with only 6.25" headroom clearance required below the tracks. For indoor use only.
Dimensions: Back Room: door height + 4'5" (1350 mm)
Head Room For Tracks: 5.625" (143 mm) above the highest point of door travel
Comes with carwash modification and tracks/chain for doors up to 12ft

.......more details