Devanco Canada - Get The Right Garage Door Opener‎ and Parts

1003-1-5/8-14'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

For 1-3/8" thick doors.

1104-8FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Commercial Brown (DN)

Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.

1104-16FT-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Sandstone (D)

Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

7001-14-WHITE

Commercial Side & Top Weather-Strip 14' Long - White (W)

White galvanized steel with white dual fin vinyl.
Commercial and Residential use.
Steel is notched on both ends for easier installation.

1001-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

Aluminum retainer with black dual-fin vinyl

25-42-90

Extension Spring 7' Door - 90 lbs Light Blue

Double - Loop
25" long 42" stretch 90 lb load
Sold individually
Same as part number 109
Rated for 10000 cycles

Spec Sheet

28-32081

Truck Door 2" Horizontal Track with 8" Radius 120" Roadside (LH) for Whiting Roll-Up Doors

SPECS: Length: 120" Fits door sizes: Greater than 96" high
Cross Reference: W #11-3
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints
8" radius
For use with 2" diameter steel or nylon rollers

.......more details

28-02201

Truck Door 2" Vertical Track & Right Angle Assembly 106.5" Curbside (RH) for Whiting Roll-Up Doors

SPECS: Length: 106.5" Fits door sizes: 91" - 100" high
Assembly includes: Right angle mounting track Vertical track and Torsion bracket
Cross Reference: W #2275-1
Galvanized steel 14 gauge construction
Tongue and groove for proper alignment at joints

26-14525

Truck Door Intermediate Panel (15" x 98") for Todco DryFreight Doors

These panels are cut to an extra wide width to fit wider vehicle applications.
Interlocking tongue and groove design for weather-tight joint and proper panel alignment.
3/4" thick 7 ply exterior grade medium density plywood. Primer finish

25E10002

Truck Door End Hinge & Roller Cover Black E-coat finish for Whiting Roll-Up Doors

Steel construction Black E-coat finish
Removable cover allows roller change without hinge removal
Cross Reference: W #1209 T #70162
Box quantity: 50

SF600U

Spring Fitting 6" Pair Universal Thread Stationary + Winding for 1" Shaft

Universal thread and is available for 1" or 1.25" Bore - must specify when ordering.
Pair includes: (1) winding & (1) stationary.
Not single thread.
Winding bar hole 5/8"

H11G10

Hinge #10 x 11 gauge

11 gauge # 10 hinge - 0.92 lbs
Bright zinc-plated steel construction
For use with 7/16" stem rollers

K20-1050C-2P

LiftMaster Electric Motor 1/2 HP Nema 1

19-5814

LiftMaster Trolley Chain Pack #48 for 14ft Door

Chain pack only

SEDK2641A4

Erone Wireless Radio Keypad 433 MHz

Wireless RF Digicode® keypad.
Frequency: 433.92 MHz.
For automatic door opening in sequential mode.
6 channels to control 6 different relays or 6 different RF receivers.

Programming Instructions Wireless System Chart

BC096.2

Whiting ColdSaver Door Bright Stainless Steel Clad

Include: Track Balancer Standard Hardware and side top & bottom seals.
Replacement for Utility Trailer s/n CS39865

PBTL-3

Exterior 3-Btn O/C/S Control Station with Key Lockout Nema 4

Surface mount
Metal enclosure
Dimensions: 7" H x 2-3/4" W x 3-1/2" D

Sell sheet

1005-2-10'

Aluminum Bottom Retainer U-Shaped 10' Long**Actual Length 10'1"***

For door thickness 2"

DB13

Molded Rubber Bumper Black 13" L x 10" W 4" Projection 2-Hole Sold Individually

Manufactured from reinforced prime rubber
Rectangular horizontal mount
Ideal for light traffic loading docks.
Perfect protection for in-plant wall protection from forklifts and other material handling vehicles molded bumpers will not warp rust rot or harden.
Bumper comes with 2 pre-drilled countersunk mounting holes drilled to accept 3/4" anchor bolts

342.155

Whiting Intermediate Panel Tongue & Groove 15-1/2" x 96" Price on Request

Standard size panel primer only

MCJH-34-115-CON-R

Lynx MCJH Heavy-Duty Jackshaft 3/4 HP 115V Contactor Right Hand ** Replaced by CDJH

Built-in 3-channel 372 Mhz radio receiver accepts up to 20 remotes
4L V-belt primary reduction #41 drive chain and sprockets.
Adjustable friction clutch magnetic solenoid brake.
Fully driven adjustable limit switches.
Heavy duty 3 button wall station (Open Close Stop).
Adjustable spreader bar assembly included.

.......more details

M-VERSION-N4

Manaras Monitored Entrapment Protection Option Upgrade Mont + N4/12 Eyes

Upgrades added when purchasing a commercial operator

IRB-S

EMX Industries Mounting Screws for Photoeyes Sold as a Set of 2

Two sets of screws are required for each bracket installed

1003-1-5/8-8'

Aluminum Bottom Retainer L-Shaped

For 1-5/8" thick doors.

.312-2-5/8-LH-C

Torsion Spring .312 x 2-5/8" x 144" LH Coated ** Price by Quote Only

Black Oxide coating
Wire size painted on spring
Wire size: .312 ID: 2-5/8" Length: 12 ft

MOD163A

Manaras Heater in Reducer & C-Box 120V-1P 24VAC 15W + 30W

This modification is an option when ordering a commercial operator

1104-16FT-DK-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Dark Sandstone (DDG)

Sandstone rigid vinyl retainer with dark sandstone flexible vinyl seal.
Dual fin vinyl.
Comes with cap to hide screws.
Also known as Taupe

JHDC22X4BMC

LiftMaster MAXUM Jackshaft 1.5 HP Heavy Duty 480V 3PH 60 Cycles/Hour 2200LB

New DC high-efficiency motor and gearbox provides the power needed and smooth start and stop to reduce wear-and-tear on your door and operator
Average of 12” per second opening on sectional doors and 8-9” per second on rolling steel doors
Provides seamless operation by supplying standby power when the power is down (battery backup kit sold separately)
Listed to ANSI/CAN/UL325 Standard for USA/Canada
Drive Type 65:1 Gearbox with #50 Chain Output
Radio Receiver DC Logic 1.0 board with Security+ 2.0® rolling code technology remote controls and binary DIP switch remote controls

.......more details

A10U49

Erone Long Range UHF Reader U4GO 33FT

The readers which operate with AES128 encryption offer secure access in settings like parking facilities gated communities campuses hospitals and more
Stand-alone or Wiegand mode
Up to 33' (10 m) read range
Detects vehicles up to 50 mph (80 Km/h)
Includes receiver power supply and mounting bracket

1-0199

RW Hinge 700 03 x 7 18" (36" Open) Black

Straps: Formed steel 3/8" thick x 2-1/2" wide (basic width)
Pin: 3/4" dia steel Zinc plated. Pin loose with cotter pin
Bearings: 2 hardened steel disc bearings
Finish: Complete hinge black enamel
Fasteners are not included

2300-925-BLACK

Linear Operator Cover Only Black

The Linear 2300-925-BLACK is a replacement black cover for the following series of gate operators: SWR SWC and SWD
Made of Polyethylene

K41-0387-000

LiftMaster Maxum Encoder Drive Sprocket & Hardware

HW-BRG-1

Lynx Bearing 1" x 2" OD

2 in total on a MCJH

3257

Whiting General Purpose Bottom Seal #80841

Quote required prior to sale to ensure correct fit

7131

Whiting Brush Side Seal Assembly; 7/8"

Quote required prior to sale to ensure correct fit

201-300-401-01-REFRUB

Refurbished 201-300-401-01 Unit

CRHMOFE

Pentagon Crank Handle for Manual Override Flexible End *** Price by Quote Only

C12

Felco C9 Cable Cutter 3/8" Capacity

The FELCO C12 a two-hand wire and cable cutter designed for precision.
Made with unbreakable forged aluminum handles and high-quality hardened steel blades
The triangular cutting system allows for clean cuts without crushing the cable while the ergonomic design provides comfort and efficiency.
Length: 19.69 in
Weight: 3.75 lb
Cutting diameter: 0.47 in

.......more details

OSHW-6112-M-N4-L

Manaras Opera-SH w/Carwash Mod 1/2HP 120V 1Ph Mon ECB w/N4 Photoeyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
Solenoid activated Brake

.......more details

H11G09-SS

Hinge #9 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

H11G04-SS

Hinge #4 x 11 gauge Stainless Steel

Manufactured with 11ga. Rust-Resistant 304 Stainless Steel
Universal Design
Fits Most Overhead Sectional Doors
Priced Per Each

GALV-306-6-L

Cut-to-Length Torsion Spring .306 x 6" Left Hand Wound Galvanized Red Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-6-INSTALLED

5001-16-SANDSTN

Residential Side & Top Weather-Strip 16' Long - Sandstone

Painted aluminum retainer with flexible dual fin vinyl.
Residential use.

TDC41-10

LiftMaster Trolley Chain Pack #41 1200/2200LBS 10ft Door

Chain pack only
TDC41-10 is a #41 Chain Pack Kit for 10 Ft. Trolley Rail Assemblies.
For use with LiftMaster® MAXUM TDC 1200 and 2200 Series Standard-Duty and Industrial-Duty Trolley Commercial Door Operators; installed on 10' commercial doors

8071-080

DoorKing MicroPlus 3-btn Rolling Code Transmitter

Keychain style remote
Black
Not compatible with HomeLink
Dimensions: 2.5 x 1.5 x .5 inches

BCSI-PM22

Pivin Drapeau Hex Bolt 3/8-16" *** Price by Quote Only

99000568-PER-FT

Amarr Bottom U-Seal 3.5" Gray Vinyl 1/4" T Sold per Foot

1/4" T width
Used on Strat 3000 Herit 3000 and Commercial (exceot 1350 & 2700)

GALV-234-258-R

Cut-to-Length Torsion Spring .234 x 2-5/8" Right Hand Wound Galvanized Price per Inch

Priced per inch - cones sold seperately
For factory installed cones use part no. C-258-INSTALLED

041-0400-000

LiftMaster Door Shaft Collar

Fits with LiftMaster model #98032

GX-200-MG

Garex Ready to Install Door Multi-Grooved Special Order

21" panel = 4 grooves 24" panel= 5 grooves
COMPLETE JOINT SEAL No air circulation between the panel sections eliminating thermal bridges.
Minimize the heat transfer between the inside and outside of your garage.
LIGHTWEIGHT AND ROBUST PANEL Polyurethane foam insulation pressure injected between the interior/exterior faces
WOOD END BLOCKS Suitable to receive steel end caps
HIGH-PERFORMANCE DESIGN Flexible rubber inserted into a PVC reinforced moulding offering a tightly sealed fit to the floor

.......more details

OSH-6534-M-N1-LH

Manaras Opera-SH 1 HP 600V 3 Ph Monitored Board w/N1 Eyes Left Hand

An ultra high-end heavy-duty V-belt drive industrial jackshaft operator
For use on Standard High and Vertical Lift sectional doors
Can also be used on Rolling doors and Grilles
Comes with a chain hoist for manual operation and a floor level engaging device
Clearence: side room required 16"
25 cycles per day > 100 cycles per day

.......more details

K41-0254-000

LiftMaster Electric Motor IHSL24UL

Compatible with LiftMaster® Model IHSL24UL Industrial-Heavy Commercial Slide Gate Operators.
Compatible with the following models: IHSL24UL IHSL24ULMC

SPBCU1

NICE MBAR/LBAR R10 Logic Control Board

OTBH-6533-M-N1

Manaras Trolley Operator 3/4 HP 600V 3 Ph Monitored w/N1 Photoeyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain

10BOX45RNDSM

4.5" Round Surface Mount Box

4.5 inch round surface-mount box for 4.5 inch round push plates.

OPH-6532-M-N1-LH

Manaras Opera-H 1/2HP 600V 3Ph Monitored ECB and N1 Photoeyes Left Hand

A heavy-duty industrial jackshaft operator.
For use on Standard High and Vertical Lift sectional doors.
Can also be used on Rolling doors or Grilles.
Comes with a self-engaging chain hoist for manual operation.
Clearence: side room required 15"

RSH-6814-MON-LH

Manaras Rapido Jackshaft Operator 1 HP 208V 1PH W/ Elect. Board N4X Thru Beam Eyes LH

High speed heavy-duty v-belt drive industrial operator.
Designed for use on properly counter-balanced standard high and vertical lift sectional doors weighing a maximum of 750 lbs.
Two times the speed of the standard jackshaft operator
Manages soft-starts and soft-stops
Can be wall or shelf mounted on either side of the door
Cast iron pillow block bearings

.......more details

MA005C

LiftMaster Slip Clutch Option Mega Arm

This is a replacement slip clutch option for Mega Arm gearbox

041-0035

LiftMaster Chain Spreader and Sprocket

For use with various LiftMaster® and Chamberlain® DC Chain Drive Garage Door Openers.
Complete kit includes: Chain Spreader Sprocket and C-Clip
This replacement part is compatible with the following models: 8580WLB

GALV-250-2-144-L

Torsion Spring .250 x 2" x 12ft LH Galvanized Green

Wire size: .250
Inside diameter: 2"
Length: 12 ft
Galvanized Stenciled

GD-STEND-24D-2

End Cap Steel 16G 24" Double 2" Thickness

Galvanized Steel 16-ga (1.42mm) thick.

PUSH180

Manaras Contact Block NO XB4/XB5

BPFL205

Bearing Flangette Retainer Only PFL-205 2-Hole

Does not include bearing
Steel Zinc plated finish

PROBE-200

EMX CARSENSE-101 Direct Burial Probe with 200' Lead Wire

Wand only
Requires CS101 (Carsense-101)

HAE00052

Linear Main Cover LDCO

Replacement cover only

Replacement Parts List

29120

Doorlec Transformer 120V pr 28 V. sec. 50VA

120V primary 28 V secondary 50VA

2806.156.170

Whiting .156 x 2-3/16 x 17" Roadside with Cones

GLASS-ONLY

Elton Sealed Glass Only Clear Made to Order Quote Only

Thermal replacement glass only

11442

Limit Switch w/Roller Wheel Lever for MBAR

Used on M7BAR Ops

400BL

4" Light Brush Insert 6ft Long

Polypropylene bristles

GALV-295-334-R

Cut-to-Length Torsion Spring .295 x 3-3/4" Right Hand Wound Galvanized Blue Price per Inch

Priced per inch
For factory installed cones priced seperately - use part no. C-375-INSTALLED

RS36203

Roller 3" Steel Roller Head Only Heavy-Duty 6203 Bearing 5/8"

Steel Roller Wheel diameter: 3"-C 6203 bearing
Roller Head Only

MGR20-B-2U-M-P/FT

Miller Edge Sensing Edge Round Black 2-Wire Universal Outlet Monitored Sold Per Foot

��Electromechanical edge for standard 2" round or square frame sliding sing and bi-part gates. •3-sided activation allows for immediate stopping or reversing of motion •Contours to round or square posts. •Temperature range: -30F to 155F •Lead wire: 18 gauge 2ft length •Sensitivity: nominal 6-8 PSI •2 wrie NO configuration •ANSI/UL325 recognized component •Cannot be bent •One year warranty •Monitored edge - pls specify the operator edge is connecting to •Maximum length is 10ft (over 8ft requires LTL shipment at additional cost)

NO_HAR-11

EMX Detector Only No Wiring Harness Included

LVB420-11/P1

Laminated Bumper Black 4" Projection Vertical Installation 20" x 11" Sold Individually Style P1

For use in low to medium traffic loading docks in factories and warehouses.
Can be used as rub rails at the sides of truck wells
Fabric reinforced rubber pads cut from recycled truck tires.
Rubber pads laminated between steel angles and secured with 3/4” rods
Bumper is fastened to dock surface with 3/8” steel angles and/or flat plates depending on the model chosen.
Wall mounting hole size is 1” diameter.

.......more details

Specification Sheet

GDI-LG920

GDI Jackshaft & Trolley JDMG-LG-A830 Nema 4 UL325 Photo Eyes Extra

Low Headroom at 4-3/4" (Trolley)
Dimensions: 11.35" x 4.3" x 4.3"
Motor type: Brushless DC
Max cyles: Open/Cose per day = 3200
One operator can handle all AC voltages - Single phase and three phase
No maintenance GearMotor sealed stainless steel bearings no limit switches no belts or hydraulic cylinders to maintain

.......more details

OTBH-6113-1-M-N1

Manaras Trolley Operator 3/4HP 120V 1Ph Monitored w/N1 Eyes

Heavy-duty low headroom trolley operator designed for use on industrial standard lift sectional door
25 cycles per hour 80 cycles per day
It incorporates a drum-band type solenoid brake.
Tracks are an extra 36 lbs per track
3/4 HP & 1 HP operators come with #41 full roller chain
Includes PHOTO-070

.......more details

MILLER-LEAD-WIRE

Miller Edge Up-Charge for Custom Length Lead Wire Sold by the Foot

Up charge for extra lead wire

7601351

FAAC Capacitor 8MF for 220V *** Price on Request

16-2101

LiftMaster Vbelt 3L 25" 3L250 *** NLA

This is a replacement Belt (3L250).
Compatible with LiftMaster® Model SW470GL Swing Operators
Also know as: K16-2101 G162101 162101

ZAP-8070

Zap Auto Lock 8070

8070 Auto-Lock provides integrated security with an electronic solenoid locking system that releases a shoot bolt above a roller when door is stopped and withdraws prior to door operation

210-0053

TNR Doors CurtainLok Ass'y Kit UHMW-PE 5/pr per Kit (10pcs) ** Price by Quote Only

5 complete curtainlok's with fasteners
Curtain Lok™ for 1/4” thick Rubber Doors

ME120-B-4E-P/FT

Miller Edge Sensing Edge Black 4-Wire Monitored End Outlet Sold per Foot

Electromechanical slide in edge with a small profile for motorized gates and doors rolling shutters and pinch point protection applications.
Touch sensitive signaling
Temperature range: -30F to 155F
Lead wire: 18 gauge 2ft length
Sensitivity: nominal 4 PSI
2 wire NO configuration

.......more details

MD-00142

Sprocket 410B17 3/8" Bore NO KW 2SS

SMR7620TP5

Telco Thru Beam Receiver M18

Supply voltage: 10 - 30 V dc
Control Feature: Sensitivity pot. and light/dark switch
Sensing range: 20 m
Output Status: N.C./N.O.
Housing: 18 x 1 Plastic
5M cable

.......more details

51115

Doorlec Fire Release System

For fire rated rolling service doors connecting to existing dropout fusible link device
For GH and Belt Drive operators

LRS-C1

EMX Vehicle Detector Control Unit for Single Sensor 2303-2

The Loop Replacement System (LRS) features advanced 3-axis magnetoresistive sensing technology that responds to changes in the Earth’s magnetic field caused by ferrous objects.
Three sensing elements provide measurements in the X Y and Z axes to improve detection sensitivity when used in either above or below ground installations.
The LRS is equipped with our new DETECT-ON-STOP™ or (DOS®) feature which allows detection only when a vehicle has come to a complete stop.
Backwards compatible with CS303 sensors

1634-134-W

Elton Commercial Window for Flush Doors 1-3/4" thick 16x34 White Frame Sealed Glass

Screw together window kit
Thermal window
Frame size: 35-1/8" x 17-1/8"
Cut-out size: 33-7/8" x 15-7/8"
Vision area: 31-3/4" x 13-11/16"
Different glass options and frame colours are available upon request

.......more details

BCH501L5-LH

LiftMaster Hoist Op. with Carwash Mod.and Brake 1/2 HP 115/230 VAC Logic 5 Left Hand ***Replaced by CRBH501-LH

Industrial Duty Hoist Operator with Damp Environment modification.
Comes with CPS-UN4 photoeyes and brake

SSZP15-6

Solid Shaft 1" Keyed Zinc Plated 15'-6"

G3353

GDI Chain Per 2 ft Length

If over 10' loop length is required

CAPXLTK

LiftMaster Trim Kit and Back Kit

Trim ring and back box for CAPXL.
Conceal openings left from other systems in flush-mount Infinity L and Icon installations.
Dimensions: Outer Trim – 23.75” x 19.375”

BCH751L5R-BZ

LiftMaster 3/4 HP 115/230 VAC 1 PH Commercial Hoist Op L5 Carwash and Roller Bearing Mod. RH ***No Longer Available

H-style operators include a floor level chain hoist to ease manual operation in an emergency or power outage.
The operators are typically mounted to the wall when used with larger sectional overhead doors with vertical or high lift and mounted to the wall or the front of the hood when used with rolling doors and grilles.
H operators are attached to the door jackshaft to indirectly drive the door.
MyQ® Technology enables you to securely monitor and control your facility operator and lights with your smartphone tablet or computer for greater peace of mind.
Alerts can be received as email or pop-up (push) notifications on a mobile device ensuring the status of your commercial door.
Security+ 2.0™ safeguards your facility – with every click a new code is sent to the commercial door operator so the door opens only for you.

.......more details

TRACK-SET-3-134-8

3" Tracks Set 8'-0" Torsion 1-3/4" Door Clips for Wood Frame 15" Radius *** By quote only

1KXS

Key Switch O/C w/Stop Btn Tamper Proof Nema 4 Surface Mount

OPEN-CLOSE with Center Return Key Switch with Stop Button Mortise Cylinder Tamperproof
Dimensions: H=4-3/8 W=4-1/8"" D=2-5/8""
Randomly keyed

658206

LiftMaster Exterior Pneumatic Treadle Kit 10ft

Outdoor Enclosure (NEMA 4/12)
Includes 10 feet of signal hose outdoor air switch and hose plug
OPEN (all operators) when the vehicle passes over treadle hose. The weight of the vehicle on the treadle hose activates a pneumatic switch which sends an open signal to the door. Requires a 2-wire connection to the operator but does not require power to function.