Devanco Canada

 
User Name:
Password:
Remember Me:
Forgot your password
Request a Login
Home Your Search Belt Drive
OSH-6533-ECB

Manaras Opera-SH 3/4 HP 600V 3 Ph with Electronic Circuit Board

  • An ultra high-end heavy-duty V-Belt Drive industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a chain hoist for manual operation and a floor level engaging device
  • Clearence: side room required 16"
Installation ManualSell Sheet
OPH-6113-ECB

Manaras Opera-H 3/4HP 120V 1Ph with Electronic Circuit Board

  • A heavy-duty industrial jackshaft operator
  • For use on Standard High and Vertical Lift sectional doors
  • Can also be used on Rolling doors and Grilles
  • Comes with a self-engaging chain hoist for manual operation
  • Clearence: side room required 15"
Installation ManualSell Sheet
14FT-TROLLEY-SET

LiftMaster 14ft Double Angle Rail Set for Comm. Trolley Ops 10-5814-P (2 pcs) *Actual length 203"*

  • Double Angle Rails for doors up to 14' high
  • Works with models : MT T GT APT
  • Indicated selling price is calculated with the purchase of a commercial operator. For pricing on a double angle rail only please contact us
  • Actual Length 16' 11"
VBELT_4L340

Manaras VBelt 4L 34" - repl. by A32

  • Used on MTH/MTBH APE APT models
  • Same as Doorlec 19030
LIMIT024

Manaras Double Snap-Action Limit Switch with Flat Lever

  • Replacement for LIMIT003
  • 2x SPDT - Unimax
  • Same as Doorlec # 21702
Limit Switch Chart
LIMIT018

Manaras Double Limit Switch without Lever

  • Double limit switch (DPDT) - Cherry
  • The extra contact is used to control auxiliary equipment
  • Applies to all current operators
Limit Switch Chart
LIMIT021

Manaras Single Limit Switch with Flat Lever

  • Single limit switch (SPDT) used to stop the door at top and bottom or as disconnect switch
  • Unimax
  • Snap-action
Limit Switch Chart
TIMER031

Manaras Timer 24/240V 1s-100h *** To Extent of Inventory

  • This timer-to-close can be added to any Commercial garage door opener.
  • Use with RELAY022 (8-pin base) if required.
  • Schneider Elect. part no. RE88867215
Adding a timer
RADIO-KIT004

Manaras plug-in receiver for Board 70 operators 390 MHz

  • Direct ECB plug-in receiver card kit (RADIO-RE101C) for adding or replacing on-site.
  • Maximum 16 transmitters per receiver.
  • Compatible with transmitters RADIOEM101 and RADIOEM103 SD/MD
RADIO-42

Manaras MCT-4 3-btn O/C/S transmitter 4 doors 313 MHz **Replaced by RADIO-EM932 or MV-00024

  • Open/Close/Stop remote for 4 doors.
  • By selecting A B C or D on the rotary switch you can operate any of the four doors.
  • Comes with LED battery life indicator.
  • 9V battery included.
  • Can be wall or post mounted.
  • Must be used with 4 MCR series receivers.
    • .......more details
Programming Instructions
RADIO-47

Manaras MCT-1 3-btn O/C/S transmitter 1 door **Replaced by RADIO-EM932

  • Open/Close/Stop remote for 1 door
  • Comes with LED battery life indicator
  • 9V battery included
  • Can be wall or post mounted
  • Must be used with MCR series receivers
Programming Instructions
RADIO-29

Manaras Commercial Receiver Antenna

  • Commercial receiver coaxil antenna
RADIO-15

Manaras MRX-1000 1-Channel 24V Receiver with Commercial Antenna 313 MHz ** To extent of inventory

  • Controls one operator with MT series transmitters.
  • Operates on 24VAC.
  • A LED indicates that the unit has been activated.
  • Can be installed directly onto the control box of a Manaras operator.
  • Includes a commercial receiver antenna for increased range.
  • Will be replaced by RADIO-RE901A
    • .......more details
Installation Instructions
RADIO-28

Manaras MTM-1000 1-btn mini transmitter 313 MHz ** To extent of inv*** Repl. by RADIO-EM901

  • Open/Close mini remote for 1 door
  • Comes with LED battery life indicator
  • Mini 12V battery included
  • Key chain holder included
7145.96

Whiting Bottom Seal For Coldsaver 96" long

  • Aluminum retainer sold separately
5377.115

Whiting Side Seals 1/2" Track Spacing 115" Long

  • Most common side seal for Whiting Dry Freight doors.
  • 115 inches will fit almost every size door.
2234.296

Whiting Coldsaver Bottom Panel 12-1/2" x Max 96" with lock seal and retainer ** Cut to Length

  • Fits Coldsaver Roll-Up Doors
  • 1-1/8" thick 96" wide
  • Includes Lock and keeper
108210

Linear 1-Channel Multi-Code Key Ring Transmitter 310 MHz

  • Open/Close mini remote for 1 door
  • Compatible with 310 MHz Stanley and Multi-Code receivers
  • Easy access to battery and coding switches - 10 dip switches
  • Power: 12-volt battery
  • Codes: 1024 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
1336.3

Whiting Curbside Top Panel Closure Bracket for 8" radius track

9931T

Allstar 1-btn Transmitter 108787 318 MHz ***Replaced by P-9931T

  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 19683 (set by nine trinary dip switches)
  • RF frequency: 318 MHz
  • Dimensions: 2.25" W x 4.625" H x 1" D Order number: 190-108787
    • .......more details
Programming Instructions
831-RJ

Allstar 1-Door O/C/S Receiver in Oil Tight Case (JIC) 107478 318 MHz *** To extent of inventory

  • Three channels - three relay outputs
  • Oil-tight JIC ABS case
  • Terminal strip for wiring
  • Wire whip antenna with "F" connector
  • Compatible with Allstar Classic Allister and Pulsar dipswitch transmitters and MVP quik-code transmitters
  • Power: 24 VAC/VDC
    • .......more details
Programming Instructions - Dip Switch VersionProgramming Instructions - Learn Button Version
1336.2

Whiting Roadside Top panel Closure Bracket 10" Raduis

MDR

Linear 1-Channel MegaCode Receiver 318 MHz *** Discontinued

  • Activates one device
  • Wire lead antenna
  • Mounting bracket supplied
  • Memory: storage for up to 10 MegaCode transmitters
  • Power: 24 VAC/VDC
  • Codes: 1000000+ (MegaCode format)
    • .......more details
Programming Instructions
MINI-T

Linear 1-Channel Delta3 Key Ring Transmitter 310 MHz (DNT00026)

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Key ring not supplied
  • Power: 12 V battery
  • Frequency: 310 MHz
  • Codes: 256 (set by dip switches)
    • .......more details
Programming Instructions
GRD

Linear 1-Channel Delta3 Gate Receiver 310 MHz (DNR00101) ***Discontinued

  • Auto voltage sensing - no jumpers to set
  • Single Form ”A” (normally open) relay rated at 30 Volts AC/DC up to 5 Amps
  • Supplied with whip antenna three feet of coaxial cable and bulkhead connector
  • Power: 12 - 30 VAC or 10.5 - 30 VDC
  • Codes: 256 (set by dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
8833T

Allstar 3-btn 3-Door Transmitter 108817 318 MHz

  • Open/Close remote for 3 doors
  • Compatible with Allstar and MVP receivers
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 6561 (set by trinary dip switches)
  • RF frequency: 318 MHz
    • .......more details
Programming Instructions
8833TC-OCS

Allstar 3-btn 3-Door O/C/S Transmitter 109025 318 MHz ***Replaced by P-8833TC-OCS

  • Open/Close/Stop remote for 3 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Portable transmitter
  • Easy access to battery and coding switch
  • Slide switch selects door to operate
  • Power: 9-volt battery
    • .......more details
Programming Instructions
535T

Allstar 3-btn 27-Door O/C/S Transmitter 107475 318 MHz ***Replaced by P-535T

  • Open/Close/Stop remote for 27 doors
  • Compatible with 3-channel Allstar and MVP receivers
  • Stationary mounting
  • Easy access to battery and coding switch
  • Power: 9-volt battery
  • Codes: 6561 (set by eight trinary dip switches)
    • .......more details
Programming Instructions
MCT-3

Linear 3-btn MegaCode Transmitter 318 MHz ** Use MTS3

  • Activates three 318 MHz MegaCode receivers
  • Test/operate LED
  • Visor mounting clip supplied
  • Two CR2032 batteries included
  • Codes: 1000000+ (MegaCode format)
  • Dimensions: 3" W x 1.875" H x .625" D
    • .......more details
Programming Instructions
HAE00032

Linear 8ft Chain Assembly (HCT8)

41A2816

Jobber Drive Gear for Chamberlain Sears LiftMaster residential operators

  • Drive gear for Chamberlain / LiftMaster / Sears residential garage door openers built 1984 +
  • This is an excellent quality aftermarket product
DT

Linear 1-btn Delta3 Transmitter 310 MHz (DNT00002A)

  • Activates one Delta-3 receiver
  • Test/operate LED
  • Visor mounting clip supplied
  • Power: 9-volt battery
  • Codes: 256 (set by 8 dip switches)
  • RF frequency: 310 MHz
    • .......more details
Programming Instructions
HAE00049

Linear Drive Sprocket Holder and Belt Clamp

HAE00001

Linear Wall Station

  • Wired wall station with light and lock features.
  • For LSO LDO LCO
HAE00002

Linear Safety Beam Set *** No Longer Available

  • Set includes: Sender and Receiver photocells wire and connectors
  • Safety beams will work with all Linear operators that currently have safety beams installed.
219110

Capacitor 1/2 HP 53-64 MFD 250V

  • For LDO50 only
HAE00047

Linear Complete Gear Set with Grease

  • Set includes: Helical gear worm gears and grease
  • Helical gear measures 2-7/8" diameter
HAE00040

Linear Control Logic/Receiver Board

  • Replaces HAE00039
  • Control board for LSO LDO LCO models
219109

Capacitor 1/3 HP 43-53 MFD 250V

  • For LDO33 only
1336.5

Whiting Stainless Steel Curbside Top Closure Bracket for 10" radius

7952

Whiting Truck Door Stud Plate Gasket

5600.3

Whiting Truck Door Stainless Steel Bottom Roller Bracket Assy Complete

3002-200FT

Gum Hose 1/2" ID 200' Spool

  • 1/2" inside diameter
  • Installed in bottom "U" rubber for use as a safety edge
RV-100

1" Vinyl Insert for Brush Retainer per foot

  • Color: Black
  • Fits in light brush retainers
4009-6FT

Aluminum Retainer only for Light Brush 6' Long Reverse Angle

  • For reverse angle rolling steel doors.
  • For use with Light Brush or Vinyl Insert.
4004-8FT

Aluminum Retainer only for Heavy Brush 8' Long 45 degree

  • For angle application (45 degree)
  • For use with Heavy Brush
4004-16FT

Aluminum Retainer only for Heavy Brush 16' Long 45 degree

  • For angle application (45 degree)
  • For use with Heavy Brush
4008-12FT

Aluminum Retainer only for Light Brush 12' Long 180 degree 5/8" Offset

  • 2" Offset
  • For use with Light Brush or Vinyl Insert
4008-6FT

Aluminum Retainer only for Light Brush 6' Long 180 degree 5/8" Offset

  • 2" with 5/8" Offset
  • For use with Light Brush or Vinyl Insert
4006-6FT

Aluminum Retainer only for Light Brush 6' Long 45 degree

  • For angle application (45 degree)
  • For use with Light Brush or Vinyl Insert.
4003-6FT

Aluminum Retainer only for Light Brush 6' Long 90 and 180 degree

  • For angle application (90 degree & 180 degree).
  • For use with Light Brush or Vinyl Insert.
DR

Linear 1-Ch DR3A Delta3 Receiver 310 MHz

  • 310 MHz frequency 8 dip switches for coding 256 possible codes
  • 24V AC/DC input power 3 terminal connection
  • Activates one device
  • Dimensions: 5.5" W x 4" H x 1.25" D
  • Same as: DNR00001
Installation Manual
1003-4"-YELLOW

Bottom U-Rubber 4" Yellow 200' Long

  • 4" yellow vinyl insert 200ft spool.
1003-4"-200FT

Bottom U-Rubber 4" Black 200' Long

  • 200ft spool of vinyl insert.
1009-1-3/4"

Bottom Nail-On for Wood Door Heavy Duty per foot

  • For 1-3/4" commercial doors.
  • Color: Black
1016-ADHESIVE

Adhesive for Storm Shield 6oz tube

  • For use with 1016
Safety data sheet
1014-1-5/8-24'

Rigid Vinyl Bottom Retainer Notched 24' Long

  • Black - for door thickness of 1-5/8"
1014-1-5/8-14'

Rigid Vinyl Bottom Retainer Notched 14' Long

  • Black - for door thickness of 1-5/8"
1015-1-3/4-8'

Rigid Vinyl Bottom Retainer Raised Centre 8' Long

  • Black - for door thickness of 1-3/4"
1015-1-3/4-10'

Rigid Vinyl Bottom Retainer Raised Centre 10' Long

  • Black - for door thickness of 1-3/4"
1006-2-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-2-14'

Rigid Vinyl Bottom Retainer U-Shaped 14' Long

  • Black with flexible fin to touch door face.
  • For door thickness 2"
1006-1-3/8-10'

Rigid Vinyl Bottom Retainer U-Shaped 10' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-3/8"
1006-1-1/2-12'

Rigid Vinyl Bottom Retainer U-Shaped 12' Long

  • Black with flexible fin to touch door face.
  • For door thickness 1-1/2"
1005-1-1/2-16'

Aluminum Bottom Retainer U-Shaped 16' Long

  • For door thickness 1-1/2"
PATCH_6X12

Truck Door Aluminum Trailer Patch 6" x 12"

  • Adhesive back adheres to a wide variety of material easily covering holes or other blemishes on trailers.
  • Forms a shock resistant watertight seal.
  • Painted white
371LMC

LiftMaster 1-btn Security+ Transmitter 315MHz

  • Visor clip and 3V lithium button cell (CR2032) battery included.
371LMC Manual
1003-1-5/8-12'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1003-1-5/8-14'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1003-1-5/8-16'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
1003-1-5/8-24'

Aluminum Bottom Retainer L-Shaped

  • For 1-5/8" thick doors.
  • DIE # ES18010
1003-1-3/8-24'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
  • DIE # ES18009
1003-1-3/8-10'

Aluminum Bottom Retainer L-Shaped

  • For 1-3/8" thick doors.
7001-18-BROWN

Commercial Side & Top Weather-Strip 18' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-9-BROWN

Commercial Side & Top Weather-Strip 9' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-10-BROWN

Commercial Side & Top Weather-Strip 10' Long - Brown (DN)

  • Brown galvanized steel with brown dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1104-9FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 9' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-8FT-DK-BRN

Residential Side & Top PVC Weather-Strip with cap 8' Long - Commercial Brown (DN)

  • Commercial brown rigid vinyl retainer with commercial brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
1104-18FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 18' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Full case quantity only (12).
1104-16FT-BROWN

Residential Side & Top PVC Weather-Strip with cap 16' Long - Brown (N)

  • Brown rigid vinyl retainer with brown flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
RCB-2560

Roller Chain Break #25 thru #60

  • Replacement tip included.
PRO-CUT

Pro-Cut Angle Cutter

  • Performs accurately up tp 2x2 angle.
  • Capacity is 12 gauge steel.
  • Weight is 18.5 lbs.
BLOCK-BLUE

Spring Repair Blocks .2187-.3065 Pair

  • For the temporary repair of a broken spring.
  • Wire size: .2187 - .3065
24-HWB-PAIR

Winding Bars Hex 24" Set of 2

  • Cold rolled hardened steel.
  • Hex shape keeps the bar from rolling away.
  • Machined to 1/2" at one end with a 5/8" outside dia. on the other end
  • Sold as a pair.
9001-24FT

Commercial Side & Top PVC Weather-Strip Clip-On 24' Long

  • Grey rigid vinyl retianer with black flexible vinyl.
  • Reverse angle clip-on vinyl retainer.
  • Clips onto side of rolling steel door.
  • Clips overtop of 1/4" angle.
24-RWB-PAIR

Winding Bars Round 24" Set of 2

  • Cold rolled hardened steel.
  • Machined to 1/2" at one end with 5/8" outside dia. on the other.
  • Sold as a pair.
18-RWB-PAIR

Winding Bars Round 18" Set of 2

  • Cold rolled hardened steel.
  • Machined to 7/16" at one end with 1/2" outside dia. on the other.
  • Sold as a pair.
1104-16FT-SAND

Residential Side & Top PVC Weather-Strip with cap 16' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-14FT-SAND

Residential Side & Top PVC Weather-Strip with cap 14' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-12FT-SAND

Residential Side & Top PVC Weather-Strip with cap 12' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-9FT-SAND

Residential Side & Top PVC Weather-Strip with cap 9' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-8FT-SAND

Residential Side & Top PVC Weather-Strip with cap 8' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
1104-7FT-SAND

Residential Side & Top PVC Weather-Strip with cap 7' Long - Sandstone (D)

  • Sandstone rigid vinyl retainer with sandstone flexible vinyl seal.
  • Dual fin vinyl.
  • Comes with cap to hide screws.
  • Also known as Taupe
7001-14-WHITE

Commercial Side & Top Weather-Strip 14' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-8-WHITE

Commercial Side & Top Weather-Strip 8' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-9-WHITE

Commercial Side & Top Weather-Strip 9' Long - White (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
7001-7-WHITE

Commercial Side & Top Weather-Strip 7' Long - White 7001-WW (W)

  • White galvanized steel with white dual fin vinyl.
  • Commercial and Residential use.
  • Steel is notched on both ends for easier installation.
1106-16-BLACK

Commercial Side & Top Weather-Strip 16' Long - Black

  • Aluminum retainer with black dual fin vinyl
1102-14-BLACK

Commercial Side & Top Weather-Strip 14' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.
1102-10-BLACK

Commercial Side & Top Weather-Strip 10' Long - Black

  • Aluminum retainer with black heavy-duty dual fin vinyl.